Age | Commit message (Collapse) | Author | Files | Lines |
|
if the second call of should_expire() in there ends up
grabbing and returning a new reference to dentry, we need
to drop it before continuing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... as well as setting ->d_fsdata, etc. Make all of that
atomic.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
autofs_add_active() is always called only once (and on a dentry
with freshly allocated ino, at that). autofs_del_active() is
never called more than once.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* new helper: positive_after(parent, child); parent->d_lock is
held by caller, grabs and returns the first thing after child
in the list of children that has simple_positive() true. NULL
if nothing's found; NULL child == search the entire list.
* get_next_positive_subdir() loses the redundant check for
d_count and switches to use of that helper. BTW, dput(NULL) is
a no-op for a good reason...
* get_next_positive_dentry() switched to the same helper. Logics:
look for positive child in prev; if not found, look for the
positive child of prev's parent following prev, etc. That way
we are guaranteed that we are only moving rootwards through the
ancestors of prev, which is pinned and thus not going anywhere.
Since ->d_parent on autofs never changes, the same goes for
the entire chain of ancestors and we don't need overlapping
->d_lock on them. Which avoids the trylock loops, in addition
to simplifying the logics in there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Based on 1 normalized pattern(s):
this file is part of the linux kernel and is made available under
the terms of the gnu general public license version 2 or at your
option any later version incorporated herein by reference
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 18 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075211.321157221@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
autofs_d_release() can overlap with lockless ->d_manage(),
ending up with autofs_dentry_ino() freed under the latter.
Make freeing autofs_info instances RCU-delayed...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
autofs does not expect the pipe it is given to have O_NONBLOCK set -
specifically if __kernel_write() in autofs_write() returns -EAGAIN, this
is treated as a fatal error and the pipe is closed.
For safety autofs should, therefore, clear the O_NONBLOCK flag.
Releases of systemd prior to 8th February 2019 used
pipe2(p, O_NONBLOCK|O_CLOEXEC)
and thus (inadvertently) set this flag.
Link: http://lkml.kernel.org/r/154993550902.3321.1183632970046073478.stgit@pluto-themaw-net
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix checkpatch.sh WARNING about the use of seq_printf() to print simple
strings in autofs_show_options(), use seq_puts() in this case.
Link: http://lkml.kernel.org/r/154889012613.4863.12231175554744203482.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add an autofs file system mount option that can be used to provide a
generic indicator to applications that the mount entry should be ignored
when displaying mount information.
In other OSes that provide autofs and that provide a mount list to user
space based on the kernel mount list a no-op mount option ("ignore" is
the one use on the most common OS) is allowed so that autofs file system
users can optionally use it.
The idea is that it be used by user space programs to exclude autofs
mounts from consideration when reading the mounts list.
Prior to the change to link /etc/mtab to /proc/self/mounts all I needed
to do to achieve this was to use mount(2) and not update the mtab but
now that no longer works.
I know the symlinking happened a long time ago and I considered doing
this then but, at the time I couldn't remember the commonly used option
name and thought persuading the various utility maintainers would be too
hard.
But now I have a RHEL request to do this for compatibility for a widely
used product so I want to go ahead with it and try and enlist the help
of some utility package maintainers.
Clearly, without the option nothing can be done so it's at least a
start.
Link: http://lkml.kernel.org/r/154725123970.11260.6113771566924907275.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.
Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry. However, dentry is read via autofs_dentry_ino(dentry) after
that. This may result in a use-free-bug. The patch drops the reference
count of dentry only when it is never used.
Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-net
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 092a53452bb7 ("autofs: take more care to not update last_used on
path walk") helped to (partially) resolve a problem where automounts
were not expiring due to aggressive accesses from user space.
This patch was later reverted because, for very large environments, it
meant more mount requests from clients and when there are a lot of
clients this caused a fairly significant increase in server load.
But there is a need for both types of expire check, depending on use
case, so add a mount option to allow for strict update of last use of
autofs dentrys (which just means not updating the last use on path walk
access).
Link: http://lkml.kernel.org/r/154296973880.9889.14085372741514507967.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the superblock info. catatonic setting to be part of a flags bit
field.
Link: http://lkml.kernel.org/r/154296973142.9889.17275721668508589639.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The parse_options() function uses a long list of parameters, most of
which are present in the super block info structure already.
The mount parameters set in parse_options() options don't require
cleanup so using the super block info struct directly is simpler.
Link: http://lkml.kernel.org/r/154296972423.9889.9368859245676473329.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Al Viro made some suggestions to improve the implementation of commit
0633da48f0 ("fix autofs_sbi() does not check super block type").
The check is unnecessary in all cases except for ioctl usage so placing
the check in the super block accessor function adds a small overhead to
the common case where it isn't needed.
So it's sufficient to do this in the ioctl code only.
Also the check in the ioctl code is needlessly complex.
[akpm@linux-foundation.org: declare autofs_fs_type in .h, not .c]
Link: http://lkml.kernel.org/r/154296970987.9889.1597442413573683096.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
- the rest of MM
- procfs updates
- various misc things
- more y2038 fixes
- get_maintainer updates
- lib/ updates
- checkpatch updates
- various epoll updates
- autofs updates
- hfsplus
- some reiserfs work
- fatfs updates
- signal.c cleanups
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits)
ipc/util.c: update return value of ipc_getref from int to bool
ipc/util.c: further variable name cleanups
ipc: simplify ipc initialization
ipc: get rid of ids->tables_initialized hack
lib/rhashtable: guarantee initial hashtable allocation
lib/rhashtable: simplify bucket_table_alloc()
ipc: drop ipc_lock()
ipc/util.c: correct comment in ipc_obtain_object_check
ipc: rename ipcctl_pre_down_nolock()
ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()
ipc: reorganize initialization of kern_ipc_perm.seq
ipc: compute kern_ipc_perm.id under the ipc lock
init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE
fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp
adfs: use timespec64 for time conversion
kernel/sysctl.c: fix typos in comments
drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md
fork: don't copy inconsistent signal handler state to child
signal: make get_signal() return bool
signal: make sigkill_pending() return bool
...
|
|
The userspace automount(8) daemon is meant to perform a forced expire when
sent a SIGUSR2.
But since the expiration is routed through the kernel and the kernel
doesn't send an expire request if the mount is busy this hasn't worked at
least since autofs version 5.
Add an AUTOFS_EXP_FORCED flag to allow implemention of the feature and
bump the protocol version so user space can check if it's implemented if
needed.
Link: http://lkml.kernel.org/r/152937734715.21213.6594007182776598970.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make the usage of the expire flags consistent by naming the expire flags
the same as it is named in the version 5 miscelaneous ioctl parameters and
only check the bit flags when needed.
Link: http://lkml.kernel.org/r/152937734046.21213.9454131988766280028.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
autofs_expire_indirect() isn't used outside of fs/autofs/expire.c so make
it static.
Link: http://lkml.kernel.org/r/152937733512.21213.10509996499623738446.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
autofs_expire_direct() isn't used outside of fs/autofs/expire.c so make it
static.
Link: http://lkml.kernel.org/r/152937732944.21213.11821977712410930973.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The expire flag AUTOFS_EXP_LEAVES is cleared before the second call to
should_expire() in autofs_expire_indirect() but the parameter passed in
the second call is incorrect.
Fortunately AUTOFS_EXP_LEAVES expire flag has not been used for a long
time but might be needed in the future so fix it rather than remove the
expire leaves functionality.
Link: http://lkml.kernel.org/r/152937732410.21213.7447294898147765076.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The global variable "now" in fs/autofs/expire.c is used in an inconsistent
way, sometimes using jiffies directly, and sometimes using the "now"
variable, and setting it isn't done consistently either.
But the autofs dentry info last_used field is only updated during path
walks or during expire so jiffies can be used directly and the global
variable "now" removed.
Link: http://lkml.kernel.org/r/152937731702.21213.7371321165189170865.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Depending on how it is configured the autofs user space daemon can leave
in use mounts mounted at exit and re-connect to them at start up. But for
this to work best the state of the autofs file system needs to be left
intact over the restart.
Also, at system shutdown, mounts in an autofs file system might be
umounted exposing a mount point trigger for which subsequent access can
lead to a hang. So recent versions of automount(8) now does its best to
set autofs file system mounts catatonic at shutdown.
When autofs file system mounts are catatonic it's currently possible to
create and remove directories and symlinks which can be a problem at
restart, as described above.
So return EACCES in the directory, symlink and unlink methods if the
autofs file system is catatonic.
Link: http://lkml.kernel.org/r/152902119090.4144.9561910674530214291.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
autofs_sbi() does not check the superblock magic number to verify it has
been given an autofs super block.
Link: http://lkml.kernel.org/r/153475422934.17131.7563724552005298277.stgit@pluto.themaw.net
Reported-by: <syzbot+87c3c541582e56943277@syzkaller.appspotmail.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
|
|
To access these fields the code always has to go to group leader so
going to signal struct is no loss and is actually a fundamental simplification.
This saves a little bit of memory by only allocating the pid pointer array
once instead of once for every thread, and even better this removes a
few potential races caused by the fact that group_leader can be changed
by de_thread, while signal_struct can not.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The autofs subsystem does not check that the "path" parameter is present
for all cases where it is required when it is passed in via the "param"
struct.
In particular it isn't checked for the AUTOFS_DEV_IOCTL_OPENMOUNT_CMD
ioctl command.
To solve it, modify validate_dev_ioctl(function to check that a path has
been provided for ioctl commands that require it.
Link: http://lkml.kernel.org/r/153060031527.26631.18306637892746301555.stgit@pluto.themaw.net
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Reported-by: syzbot+60c837b428dc84e83a93@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that systemd has a bug: it wants to load the autofs module
early because of some initialization ordering with udev, and it doesn't
do that correctly. Everywhere else it does the proper "look up module
name" that does the proper alias resolution, but in that early code, it
just uses a hardcoded "autofs4" for the module name.
The result of that is that as of commit a2225d931f75 ("autofs: remove
left-over autofs4 stubs"), you get
systemd[1]: Failed to insert module 'autofs4': No such file or directory
in the system logs, and a lack of module loading. All this despite the
fact that we had very clearly marked 'autofs4' as an alias for this
module.
What's so ridiculous about this is that literally everything else does
the module alias handling correctly, including really old versions of
systemd (that just used 'modprobe' to do this), and even all the other
systemd module loading code.
Only that special systemd early module load code is broken, hardcoding
the module names for not just 'autofs4', but also "ipv6", "unix",
"ip_tables" and "virtio_rng". Very annoying.
Instead of creating an _additional_ separate compatibility 'autofs4'
module, just rely on the fact that everybody else gets this right, and
just call the module 'autofs4' for compatibility reasons, with 'autofs'
as the alias name.
That will allow the systemd people to fix their bugs, adding the proper
alias handling, and maybe even fix the name of the module to be just
"autofs" (so that they can _test_ the alias handling). And eventually,
we can revert this silly compatibility hack.
See also
https://github.com/systemd/systemd/issues/9501
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946
for the systemd bug reports upstream and in the Debian bug tracker
respectively.
Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: Michael Biebl <biebl@debian.org>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fixes: a2225d931f75ddd3 ("autofs: remove left-over autofs4 stubs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's no need to retain the fs/autofs4 directory for backward
compatibility.
Adding an AUTOFS4_FS fragment to the autofs Kconfig and a module alias
for autofs4 is sufficient for almost all cases. Not keeping fs/autofs4
remnants will prevent "insmod <path>/autofs4/autofs4.ko" from working
but this shouldn't be used in automation scripts rather than
modprobe(8).
There were some comments about things to look out for with the module
rename in the fs/autofs4/Kconfig that is removed by this patch, see the
commit patch if you are interested.
One potential problem with this change is that when the
fs/autofs/Kconfig fragment for AUTOFS4_FS is removed any AUTOFS4_FS
entries will be removed from the kernel config, resulting in no autofs
file system being built if there is no AUTOFS_FS entry also.
This would have also happened if the fs/autofs4 remnants had remained
and is most likely to be a problem with automated builds.
Please check your build configurations before the removal which will
occur after the next couple of kernel releases.
Acked-by: Ian Kent <raven@themaw.net>
[ With edits and commit message from Ian Kent ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't set "*name" so it's slightly nicer to just pass "name" instead
of "&name".
Link: http://lkml.kernel.org/r/20180531064736.lnisb55eajwjynvk@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove includes that aren't needed from autofs (and fs/compat_ioctl.c).
Link: http://lkml.kernel.org/r/152635085258.5968.9743527195522188148.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Create Makefile and Kconfig for autofs module.
[raven@themaw.net: make autofs4 Kconfig depend on AUTOFS_FS]
Link: http://lkml.kernel.org/r/152687649097.8263.7046086367407522029.stgit@pluto.themaw.net
Link: http://lkml.kernel.org/r/152626705591.28589.356365986974038383.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Copy source files from the autofs4 directory to the autofs directory.
Link: http://lkml.kernel.org/r/152626705013.28589.931913083997578251.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Nobody appears to be interested in fixing autofs3 bugs
any more and it uses the BKL, which is going away.
Move this to staging for retirement. Unless someone
complains until 2.6.38, we can remove it for good.
The include/linux/auto_fs.h header file is still used
by autofs4, so it remains in place.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@linux.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Handling of autofs ioctl numbers does not need to be generic
and can easily be done directly in autofs itself.
This also pushes the BKL into autofs and autofs4 ioctl
methods.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Cc: Autofs <autofs@linux.kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
Do not use the fallback default_llseek() if the readdir operation of the
filesystem still uses the big kernel lock.
Since llseek() modifies
file->f_pos of the directory directly it may need locking to not confuse
readdir which usually uses file->f_pos directly as well
Since the special characteristics of the BKL (unlocked on schedule) are
not necessary in this case, the inode mutex can be used for locking as
provided by generic_file_llseek(). This is only possible since all
filesystems, except reiserfs, either use a directory as a flat file or
with disk address offsets. Reiserfs on the other hand uses a 32bit hash
off the filename as the offset so generic_file_llseek() can get used as
well since the hash is always smaller than sb->s_maxbytes (= (512 << 32) -
blocksize).
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Anders Larsen <al@alarsen.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
mnt should remain the same for all iterations through the list;
as it is, if we have a busy mount, mnt follows into it and isn't
restored for the next iteration.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
|
|
... and don't bother in callers. Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.
i_mode is not worth the effort; it has no common default value.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: autofs@linux.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
|
|
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a .show_options super operation to autofs.
Use generic_show_options() and save the complete option string in
autofs_fill_super().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Stop the autofs filesystem from using iget() and read_inode(). Replace
autofs_read_inode() with autofs_iget(), and call that instead of iget().
autofs_iget() then uses iget_locked() directly and returns a proper error code
instead of an inode in the event of an error.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Ian Kent <raven@themaw.net>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two places that do so - the cgroups subsystem and the autofs
code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Ian Kent <raven@themaw.net>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|