summaryrefslogtreecommitdiffstats
path: root/fs/afs
AgeCommit message (Collapse)AuthorFilesLines
2018-06-16Merge branch 'afs-proc' of ↵Linus Torvalds14-633/+716
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "Assorted AFS stuff - ended up in vfs.git since most of that consists of David's AFS-related followups to Christoph's procfs series" * 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Optimise callback breaking by not repeating volume lookup afs: Display manually added cells in dynamic root mount afs: Enable IPv6 DNS lookups afs: Show all of a server's addresses in /proc/fs/afs/servers afs: Handle CONFIG_PROC_FS=n proc: Make inline name size calculation automatic afs: Implement network namespacing afs: Mark afs_net::ws_cell as __rcu and set using rcu functions afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus() proc: Add a way to make network proc files writable afs: Rearrange fs/afs/proc.c to remove remaining predeclarations. afs: Rearrange fs/afs/proc.c to move the show routines up afs: Rearrange fs/afs/proc.c by moving fops and open functions down afs: Move /proc management functions to the end of the file
2018-06-15afs: Optimise callback breaking by not repeating volume lookupDavid Howells3-20/+107
At the moment, afs_break_callbacks calls afs_break_one_callback() for each separate FID it was given, and the latter looks up the volume individually for each one. However, this is inefficient if two or more FIDs have the same vid as we could reuse the volume. This is complicated by cell aliasing whereby we may have multiple cells sharing a volume and can therefore have multiple callback interests for any particular volume ID. At the moment afs_break_one_callback() scans the entire list of volumes we're getting from a server and breaks the appropriate callback in every matching volume, regardless of cell. This scan is done for every FID. Optimise callback breaking by the following means: (1) Sort the FID list by vid so that all FIDs belonging to the same volume are clumped together. This is done through the use of an indirection table as we cannot do an insertion sort on the afs_callback_break array as we decode FIDs into it as we subsequently also have to decode callback info into it that corresponds by array index only. We also don't really want to bubblesort afterwards if we can avoid it. (2) Sort the server->cb_interests array by vid so that all the matching volumes are grouped together. This permits the scan to stop after finding a record that has a higher vid. (3) When breaking FIDs, we try to keep server->cb_break_lock as long as possible, caching the start point in the array for that volume group as long as possible. It might make sense to add another layer in that list and have a refcounted volume ID anchor that has the matching interests attached to it rather than being in the list. This would allow the lock to be dropped without losing the cursor. Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-15afs: Display manually added cells in dynamic root mountDavid Howells5-27/+170
Alter the dynroot mount so that cells created by manipulation of /proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root cell as a module parameter will cause directories for those cells to be created in the dynamic root superblock for the network namespace[*]. To this end: (1) Only one dynamic root superblock is now created per network namespace and this is shared between all attempts to mount it. This makes it easier to find the superblock to modify. (2) When a dynamic root superblock is created, the list of cells is walked and directories created for each cell already defined. (3) When a new cell is added, if a dynamic root superblock exists, a directory is created for it. (4) When a cell is destroyed, the directory is removed. (5) These directories are created by calling lookup_one_len() on the root dir which automatically creates them if they don't exist. [*] Inasmuch as network namespaces are currently supported here. Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-15afs: Enable IPv6 DNS lookupsDavid Howells2-2/+2
Remove the restriction on DNS lookup upcalls that prevents ipv6 addresses from being looked up. Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-15afs: Show all of a server's addresses in /proc/fs/afs/serversDavid Howells1-2/+8
Show all of a server's addresses in /proc/fs/afs/servers, placing the second plus addresses on padded lines of their own. The current address is marked with a star. Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-15afs: Handle CONFIG_PROC_FS=nDavid Howells2-2/+10
The AFS filesystem depends at the moment on /proc for configuration and also presents information that way - however, this causes a compilation failure if procfs is disabled. Fix it so that the procfs bits aren't compiled in if procfs is disabled. This means that you can't configure the AFS filesystem directly, but it is still usable provided that an up-to-date keyutils is installed to look up cells by SRV or AFSDB DNS records. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-3/+4
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+4
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani1-1/+1
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-06-04rxrpc: Fix handling of call quietly cancelled out on serverDavid Howells1-0/+4
Sometimes an in-progress call will stop responding on the fileserver when the fileserver quietly cancels the call with an internally marked abort (RX_CALL_DEAD), without sending an ABORT to the client. This causes the client's call to eventually expire from lack of incoming packets directed its way, which currently leads to it being cancelled locally with ETIME. Note that it's not currently clear as to why this happens as it's really hard to reproduce. The rotation policy implement by kAFS, however, doesn't differentiate between ETIME meaning we didn't get any response from the server and ETIME meaning the call got cancelled mid-flow. The latter leads to an oops when fetching data as the rotation partially resets the afs_read descriptor, which can result in a cleared page pointer being dereferenced because that page has already been filled. Handle this by the following means: (1) Set a flag on a call when we receive a packet for it. (2) Store the highest packet serial number so far received for a call (bearing in mind this may wrap). (3) If, when the "not received anything recently" timeout expires on a call, we've received at least one packet for a call and the connection as a whole has received packets more recently than that call, then cancel the call locally with ECONNRESET rather than ETIME. This indicates that the call was definitely in progress on the server. (4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME, don't try the next server, but rather abort the call. This avoids the oops as we don't try to reuse the afs_read struct. Rather, as-yet ungotten pages will be reread at a later data. Also: (5) Add an rxrpc tracepoint to log detection of the call being reset. Without this, I occasionally see an oops like the following: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:_copy_to_iter+0x204/0x310 RSP: 0018:ffff8800cae0f828 EFLAGS: 00010206 RAX: 0000000000000560 RBX: 0000000000000560 RCX: 0000000000000560 RDX: ffff8800cae0f968 RSI: ffff8800d58b3312 RDI: 0005080000000000 RBP: ffff8800cae0f968 R08: 0000000000000560 R09: ffff8800ca00f400 R10: ffff8800c36f28d4 R11: 00000000000008c4 R12: ffff8800cae0f958 R13: 0000000000000560 R14: ffff8800d58b3312 R15: 0000000000000560 FS: 00007fdaef108080(0000) GS:ffff8800ca680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb28a8fa000 CR3: 00000000d2a76002 CR4: 00000000001606e0 Call Trace: skb_copy_datagram_iter+0x14e/0x289 rxrpc_recvmsg_data.isra.0+0x6f3/0xf68 ? trace_buffer_unlock_commit_regs+0x4f/0x89 rxrpc_kernel_recv_data+0x149/0x421 afs_extract_data+0x1e0/0x798 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_deliver_fs_fetch_data+0x33a/0x5ab afs_deliver_to_call+0x1ee/0x5e0 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_wait_for_call_to_complete+0x12b/0x52e ? wake_up_q+0x54/0x54 afs_make_call+0x287/0x462 ? afs_fs_fetch_data+0x3e6/0x3ed ? rcu_read_lock_sched_held+0x5d/0x63 afs_fs_fetch_data+0x3e6/0x3ed afs_fetch_data+0xbb/0x14a afs_readpages+0x317/0x40d __do_page_cache_readahead+0x203/0x2ba ? ondemand_readahead+0x3a7/0x3c1 ondemand_readahead+0x3a7/0x3c1 generic_file_buffered_read+0x18b/0x62f __vfs_read+0xdb/0xfe vfs_read+0xb2/0x137 ksys_read+0x50/0x8c do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note the weird value in RDI which is a result of trying to kmap() a NULL page pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds1-119/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-02Merge tag 'afs-fixes-20180514' into afs-procAl Viro16-167/+222
backmerge AFS fixes that went into mainline and deal with the conflict in fs/afs/fsclient.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-23afs: Implement network namespacingDavid Howells8-295/+173
Implement network namespacing within AFS, but don't yet let mounts occur outside the init namespace. An additional patch will be required propagate the network namespace across automounts. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-23afs: Mark afs_net::ws_cell as __rcu and set using rcu functionsDavid Howells3-6/+6
The afs_net::ws_cell member is sometimes used under RCU conditions from within an seq-readlock. It isn't, however, marked __rcu and it isn't set using the proper RCU barrier-imposing functions. Fix this by annotating it with __rcu and using appropriate barriers to make sure accesses are correctly ordered. Without this, the code can produce the following warning: >> fs/afs/proc.c:151:24: sparse: incompatible types in comparison expression (different address spaces) Fixes: f044c8847bb6 ("afs: Lay the groundwork for supporting network namespaces") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-23afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()David Howells1-42/+55
Sparse doesn't appear able to handle the conditionally-taken locks in xdr_decode_AFSFetchStatus(), even though the lock and unlock are both contingent on the same unvarying function argument. Deal with this by interpolating a wrapper function that takes the lock if needed and calls xdr_decode_AFSFetchStatus() on two separate branches, one with the lock held and one without. This allows Sparse to work out the locking. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.David Howells1-192/+160
Rearrange fs/afs/proc.c to get rid of all the remaining predeclarations. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Rearrange fs/afs/proc.c to move the show routines upDavid Howells1-75/+75
Rearrange fs/afs/proc.c to move the show routines up to the top of each block so the order is show, iteration, ops, file ops, fops. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Rearrange fs/afs/proc.c by moving fops and open functions downDavid Howells1-44/+27
Rearrange fs/afs/proc.c by moving fops and open functions down so as to remove predeclarations. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-18afs: Move /proc management functions to the end of the fileDavid Howells1-81/+79
In fs/afs/proc.c, move functions that create and remove /proc files to the end of the source file as a first stage in getting rid of all the forward declarations. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16afs: Fix mounting of backup volumesMarc Dionne1-9/+10
In theory the AFS_VLSF_BACKVOL flag for a server in a vldb entry would indicate the presence of a backup volume on that server. In practice however, this flag is never set, and the presence of a backup volume is implied by the entry having AFS_VLF_BACKEXISTS set, for the server that hosts the read-write volume (has AFS_VLSF_RWVOL). Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16afs: Fix directory permissions checkDavid Howells1-7/+3
Doing faccessat("/afs/some/directory", 0) triggers a BUG in the permissions check code. Fix this by just removing the BUG section. If no permissions are asked for, just return okay if the file exists. Also: (1) Split up the directory check so that it has separate if-statements rather than if-else-if (e.g. checking for MAY_EXEC shouldn't skip the check for MAY_READ and MAY_WRITE). (2) Check for MAY_CHDIR as MAY_EXEC. Without the main fix, the following BUG may occur: kernel BUG at fs/afs/security.c:386! invalid opcode: 0000 [#1] SMP PTI ... RIP: 0010:afs_permission+0x19d/0x1a0 [kafs] ... Call Trace: ? inode_permission+0xbe/0x180 ? do_faccessat+0xdc/0x270 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 00d3b7a4533e ("[AFS]: Add security support.") Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16afs: simplify procfs codeChristoph Hellwig1-119/+15
Use remove_proc_subtree to remove the whole subtree on cleanup, and unwind the registration loop into individual calls. Switch to use proc_create_seq where applicable. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-14afs: Fix the non-encryption of callsDavid Howells1-0/+7
Some AFS servers refuse to accept unencrypted traffic, so can't be accessed with kAFS. Set the AF_RXRPC security level to encrypt client calls to deal with this. Note that incoming service calls are set by the remote client and so aren't affected by this. This requires an AF_RXRPC patch to pass the value set by setsockopt to calls begun by the kernel. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix CB.CallBack handlingDavid Howells1-28/+7
The handling of CB.CallBack messages sent by the fileserver to the client is broken in that they are currently being processed after the reply has been transmitted. This is not what the fileserver expects, however. It holds up change visibility until the reply comes so as to maintain cache coherency, and so expects the client to have to refetch the state on the affected files. Fix CB.CallBack handling to perform the callback break before sending the reply. The fileserver is free to hold up status fetches issued by other threads on the same client that occur in reponse to the callback until any pending changes have been committed. Fixes: d001648ec7cf ("rxrpc: Don't expose skbs to in-kernel users [ver #2]") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix whole-volume callback handlingDavid Howells10-32/+63
It's possible for an AFS file server to issue a whole-volume notification that callbacks on all the vnodes in the file have been broken. This is done for R/O and backup volumes (which don't have per-file callbacks) and for things like a volume being taken offline. Fix callback handling to detect whole-volume notifications, to track it across operations and to check it during inode validation. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix afs_find_server search loopMarc Dionne1-13/+0
The code that looks up servers by addresses makes the assumption that the list of addresses for a server is sorted. It exits the loop if it finds that the target address is larger than the current candidate. As the list is not currently sorted, this can lead to a failure to find a matching server, which can cause callbacks from that server to be ignored. Remove the early exit case so that the complete list is searched. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix the handling of an unfound server in CM operationsDavid Howells2-27/+12
If the client cache manager operations that need the server record (CB.Callback, CB.InitCallBackState, and CB.InitCallBackState3) can't find the server record, they abort the call from the file server with RX_CALL_DEAD when they should return okay. Fixes: c35eccb1f614 ("[AFS]: Implement the CB.InitCallBackState3 operation.") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Add a tracepoint to record callbacks from unlisted serversDavid Howells1-3/+9
Add a tracepoint to record callbacks from servers for which we don't have a record. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix the handling of CB.InitCallBackState3 to find the server by UUIDDavid Howells1-3/+3
Fix the handling of the CB.InitCallBackState3 service call to find the record of a server that we're using by looking it up by the UUID passed as the parameter rather than by its address (of which it might have many, and which may change). Fixes: c35eccb1f614 ("[AFS]: Implement the CB.InitCallBackState3 operation.") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix VNOVOL handling in address rotationDavid Howells1-2/+2
If a volume location record lists multiple file servers for a volume, then it's possible that due to a misconfiguration or a changing configuration that one of the file servers doesn't know about it yet and will abort VNOVOL. Currently, the rotation algorithm will stop with EREMOTEIO. Fix this by moving on to try the next server if VNOVOL is returned. Once all the servers have been tried and the record rechecked, the algorithm will stop with EREMOTEIO or ENOMEDIUM. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibilityDavid Howells1-8/+21
The OpenAFS server's RXAFS_InlineBulkStatus implementation has a bug whereby if an error occurs on one of the vnodes being queried, then the errorCode field is set correctly in the corresponding status, but the interfaceVersion field is left unset. Fix kAFS to deal with this by evaluating the AFSFetchStatus blob against the following cases when called from FS.InlineBulkStatus delivery: (1) If InterfaceVersion == 0 then: (a) If errorCode != 0 then it indicates the abort code for the corresponding vnode. (b) If errorCode == 0 then the status record is invalid. (2) If InterfaceVersion == 1 then: (a) If errorCode != 0 then it indicates the abort code for the corresponding vnode. (b) If errorCode == 0 then the status record is valid and can be parsed. (3) If InterfaceVersion is anything else then the status record is invalid. Fixes: dd9fbcb8e103 ("afs: Rearrange status mapping") Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix server rotation's handling of fileserver probe failureDavid Howells1-2/+10
The server rotation algorithm just gives up if it fails to probe a fileserver. Fix this by rotating to the next fileserver instead. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix refcounting in callback registrationDavid Howells4-22/+52
The refcounting on afs_cb_interest struct objects in afs_register_server_cb_interest() is wrong as it uses the server list entry's call back interest pointer without regard for the fact that it might be replaced at any time and the object thrown away. Fix this by: (1) Put a lock on the afs_server_list struct that can be used to mediate access to the callback interest pointers in the servers array. (2) Keep a ref on the callback interest that we get from the entry. (3) Dropping the old reference held by vnode->cb_interest if we replace the pointer. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix giving up callbacks on server destructionDavid Howells3-4/+11
When a server record is destroyed, we want to send a message to the server telling it that we're giving up all the callbacks it has promised us. Apply two fixes to this: (1) Only send the FS.GiveUpAllCallBacks message if we actually got a callback from that server. We assume this to be the case if we performed at least one successful FS operation on that server. (2) Send it to the address last used for that server rather than always picking the first address in the list (which might be unreachable). Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix address list parsingDavid Howells1-10/+15
The parsing of port specifiers in the address list obtained from the DNS resolution upcall doesn't work as in4_pton() and in6_pton() will fail on encountering an unexpected delimiter (in this case, the '+' marking the port number). However, in*_pton() can't be given multiple specifiers. Fix this by finding the delimiter in advance and not relying on in*_pton() to find the end of the address for us. Fixes: 8b2a464ced77 ("afs: Add an address list concept") Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix directory page lockingDavid Howells4-24/+22
The afs directory loading code (primarily afs_read_dir()) locks all the pages that hold a directory's content blob to defend against getdents/getdents races and getdents/lookup races where the competitors issue conflicting reads on the same data. As the reads will complete consecutively, they may retrieve different versions of the data and one may overwrite the data that the other is busy parsing. Fix this by not locking the pages at all, but rather by turning the validation lock into an rwsem and getting an exclusive lock on it whilst reading the data or validating the attributes and a shared lock whilst parsing the data. Sharing the attribute validation lock should be fine as the data fetch will retrieve the attributes also. The individual page locks aren't needed at all as the only place they're being used is to serialise data loading. Without this patch, the: if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) { ... } part of afs_read_dir() may be skipped, leaving the pages unlocked when we hit the success: clause - in which case we try to unlock the not-locked pages, leading to the following oops: page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0 flags: 0xfffe000001004(referenced|private) raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000 page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) page->mem_cgroup:ffff98156b27c000 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1205! ... RIP: 0010:unlock_page+0x43/0x50 ... Call Trace: afs_dir_iterate+0x789/0x8f0 [kafs] ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x166/0x1d0 ? afs_do_lookup+0x69/0x490 [kafs] ? afs_do_lookup+0x101/0x490 [kafs] ? key_default_cmp+0x20/0x20 ? request_key+0x3c/0x80 ? afs_lookup+0xf1/0x340 [kafs] ? __lookup_slow+0x97/0x150 ? lookup_slow+0x35/0x50 ? walk_component+0x1bf/0x490 ? path_lookupat.isra.52+0x75/0x200 ? filename_lookup.part.66+0xa0/0x170 ? afs_end_vnode_operation+0x41/0x60 [kafs] ? __check_object_size+0x9c/0x171 ? strncpy_from_user+0x4a/0x170 ? vfs_statx+0x73/0xe0 ? __do_sys_newlstat+0x39/0x70 ? __x64_sys_getdents+0xc9/0x140 ? __x64_sys_getdents+0x140/0x140 ? do_syscall_64+0x5b/0x160 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f3ddee8dc4e2 ("afs: Fix directory handling") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-20afs: Fix server record deletionDavid Howells1-1/+8
AFS server records get removed from the net->fs_servers tree when they're deleted, but not from the net->fs_addresses{4,6} lists, which can lead to an oops in afs_find_server() when a server record has been removed, for instance during rmmod. Fix this by deleting the record from the by-address lists before posting it for RCU destruction. The reason this hasn't been noticed before is that the fileserver keeps probing the local cache manager, thereby keeping the service record alive, so the oops would only happen when a fileserver eventually gets bored and stops pinging or if the module gets rmmod'd and a call comes in from the fileserver during the window between the server records being destroyed and the socket being closed. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c ... Workqueue: kafsd afs_process_async_call [kafs] RIP: 0010:afs_find_server+0x271/0x36f [kafs] ... Call Trace: afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs] afs_deliver_to_call+0x1ee/0x5e8 [kafs] afs_process_async_call+0x5b/0xd0 [kafs] process_one_work+0x2c2/0x504 worker_thread+0x1d4/0x2ac kthread+0x11f/0x127 ret_from_fork+0x24/0x30 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-12Merge branch 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds25-591/+2562
Pull AFS updates from Al Viro: "The AFS series posted by dhowells depended upon lookup_one_len() rework; now that prereq is in the mainline, that series had been rebased on top of it and got some exposure and testing..." * 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Do better accretion of small writes on newly created content afs: Add stats for data transfer operations afs: Trace protocol errors afs: Locally edit directory data for mkdir/create/unlink/... afs: Adjust the directory XDR structures afs: Split the directory content defs into a header afs: Fix directory handling afs: Split the dynroot stuff out and give it its own ops tables afs: Keep track of invalid-before version for dentry coherency afs: Rearrange status mapping afs: Make it possible to get the data version in readpage afs: Init inode before accessing cache afs: Introduce a statistics proc file afs: Dump bad status record afs: Implement @cell substitution handling afs: Implement @sys substitution handling afs: Prospectively look up extra files when doing a single lookup afs: Don't over-increment the cell usage count when pinning it afs: Fix checker warnings vfs: Remove the const from dir_context::actor
2018-04-11page cache: use xa_lockMatthew Wilcox1-4/+5
Remove the address_space ->tree_lock and use the xa_lock newly added to the radix_tree_root. Rename the address_space ->page_tree to ->i_pages, since we don't really care that it's a tree. [willy@infradead.org: fix nds32, fs/dax.c] Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-09afs: Do better accretion of small writes on newly created contentDavid Howells5-21/+24
Processes like ld that do lots of small writes that aren't necessarily contiguous result in a lot of small StoreData operations to the server, the idea being that if someone else changes the data on the server, we only write our changes over that and not the space between. Further, we don't want to write back empty space if we can avoid it to make it easier for the server to do sparse files. However, making lots of tiny RPC ops is a lot less efficient for the server than one big one because each op requires allocation of resources and the taking of locks, so we want to compromise a bit. Reduce the load by the following: (1) If a file is just created locally or has just been truncated with O_TRUNC locally, allow subsequent writes to the file to be merged with intervening space if that space doesn't cross an entire intervening page. (2) Don't flush the file on ->flush() but rather on ->release() if the file was open for writing. Just linking vmlinux.o, without this patch, looking in /proc/fs/afs/stats: file-wr : n=441 nb=513581204 and after the patch: file-wr : n=62 nb=513668555 there were 379 fewer StoreData RPC operations at the expense of an extra 87K being written. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Add stats for data transfer operationsDavid Howells4-0/+23
Add statistics to /proc/fs/afs/stats for data transfer RPC operations. New lines are added that look like: file-rd : n=55794 nb=10252282150 file-wr : n=9789 nb=3247763645 where n= indicates the number of ops completed and nb= indicates the number of bytes successfully transferred. file-rd is the counts for read/fetch operations and file-wr the counts for write/store operations. Note that directory and symlink downloading are included in the file-rd stats at the moment. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Trace protocol errorsDavid Howells6-46/+58
Trace protocol errors detected in afs. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Locally edit directory data for mkdir/create/unlink/...David Howells7-29/+625
Locally edit the contents of an AFS directory upon a successful inode operation that modifies that directory (such as mkdir, create and unlink) so that we can avoid the current practice of re-downloading the directory after each change. This is viable provided that the directory version number we get back from the modifying RPC op is exactly incremented by 1 from what we had previously. The data in the directory contents is in a defined format that we have to parse locally to perform lookups and readdir, so modifying isn't a problem. If the edit fails, we just clear the VALID flag on the directory and it will be reloaded next time it is needed. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Adjust the directory XDR structuresDavid Howells2-53/+53
Adjust the AFS directory XDR structures in a number of superficial ways: (1) Rename them to all begin afs_xdr_. (2) Use u8 instead of uint8_t. (3) Mark the structures as __packed so they don't get rearranged by the compiler. (4) Rename the hdr member of afs_xdr_dir_block to meta. (5) Rename the pagehdr member of afs_xdr_dir_block to hdr. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Split the directory content defs into a headerDavid Howells2-52/+67
Split the directory content definitions into a header file so that they can be used by multiple .c files. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Fix directory handlingDavid Howells7-108/+271
AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Split the dynroot stuff out and give it its own ops tablesDavid Howells5-185/+228
Split the AFS dynamic root stuff out of the main directory handling file and into its own file as they share little in common. The dynamic root code also gets its own dentry and inode ops tables. Signed-off-by: David Howells <dhowells@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 14:24:11 +0000