summaryrefslogtreecommitdiffstats
path: root/fs/afs/server.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-24afs: Probe multiple fileservers simultaneouslyDavid Howells1-102/+7
Send probes to all the unprobed fileservers in a fileserver list on all addresses simultaneously in an attempt to find out the fastest route whilst not getting stuck for 20s on any server or address that we don't get a reply from. This alleviates the problem whereby attempting to access a new server can take a long time because the rotation algorithm ends up rotating through all servers and addresses until it finds one that responds. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Eliminate the address pointer from the address list cursorDavid Howells1-2/+0
Eliminate the address pointer from the address list cursor as it's redundant (ac->addrs[ac->index] can be used to find the same address) and address lists must be replaced rather than being rearranged, so is of limited value. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Implement YFS support in the fs clientDavid Howells1-0/+8
Implement support for talking to YFS-variant fileservers in the cache manager and the filesystem client. These implement upgraded services on the same port as their AFS services. YFS fileservers provide expanded capabilities over AFS. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Add a couple of tracepoints to log I/O errorsDavid Howells1-1/+1
Add a couple of tracepoints to log the production of I/O errors within the AFS filesystem. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Implement VL server rotationDavid Howells1-30/+12
Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-15afs: Fix clearance of replyDavid Howells1-2/+0
The recent patch to fix the afs_server struct leak didn't actually fix the bug, but rather fixed some of the symptoms. The problem is that an asynchronous call that holds a resource pointed to by call->reply[0] will find the pointer cleared in the call destructor, thereby preventing the resource from being cleaned up. In the case of the server record leak, the afs_fs_get_capabilities() function in devel code sets up a call with reply[0] pointing at the server record that should be altered when the result is obtained, but this was being cleared before the destructor was called, so the put in the destructor does nothing and the record is leaked. Commit f014ffb025c1 removed the additional ref obtained by afs_install_server(), but the removal of this ref is actually used by the garbage collector to mark a server record as being defunct after the record has expired through lack of use. The offending clearance of call->reply[0] upon completion in afs_process_async_call() has been there from the origin of the code, but none of the asynchronous calls actually use that pointer currently, so it should be safe to remove (note that synchronous calls don't involve this function). Fix this by the following means: (1) Revert commit f014ffb025c1. (2) Remove the clearance of reply[0] from afs_process_async_call(). Without this, afs_manage_servers() will suffer an assertion failure if it sees a server record that didn't get used because the usage count is not 1. Fixes: f014ffb025c1 ("afs: Fix afs_server struct leak") Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.") Signed-off-by: David Howells <dhowells@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-12afs: Fix afs_server struct leakDavid Howells1-0/+2
Fix a leak of afs_server structs. The routine that installs them in the various lookup lists and trees gets a ref on leaving the function, whether it added the server or a server already exists. It shouldn't increment the refcount if it added the server. The effect of this that "rmmod kafs" will hang waiting for the leaked server to become unused. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-15afs: Optimise callback breaking by not repeating volume lookupDavid Howells1-1/+1
At the moment, afs_break_callbacks calls afs_break_one_callback() for each separate FID it was given, and the latter looks up the volume individually for each one. However, this is inefficient if two or more FIDs have the same vid as we could reuse the volume. This is complicated by cell aliasing whereby we may have multiple cells sharing a volume and can therefore have multiple callback interests for any particular volume ID. At the moment afs_break_one_callback() scans the entire list of volumes we're getting from a server and breaks the appropriate callback in every matching volume, regardless of cell. This scan is done for every FID. Optimise callback breaking by the following means: (1) Sort the FID list by vid so that all FIDs belonging to the same volume are clumped together. This is done through the use of an indirection table as we cannot do an insertion sort on the afs_callback_break array as we decode FIDs into it as we subsequently also have to decode callback info into it that corresponds by array index only. We also don't really want to bubblesort afterwards if we can avoid it. (2) Sort the server->cb_interests array by vid so that all the matching volumes are grouped together. This permits the scan to stop after finding a record that has a higher vid. (3) When breaking FIDs, we try to keep server->cb_break_lock as long as possible, caching the start point in the array for that volume group as long as possible. It might make sense to add another layer in that list and have a refcounted volume ID anchor that has the matching interests attached to it rather than being in the list. This would allow the lock to be dropped without losing the cursor. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix afs_find_server search loopMarc Dionne1-13/+0
The code that looks up servers by addresses makes the assumption that the list of addresses for a server is sorted. It exits the loop if it finds that the target address is larger than the current candidate. As the list is not currently sorted, this can lead to a failure to find a matching server, which can cause callbacks from that server to be ignored. Remove the early exit case so that the complete list is searched. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14afs: Fix giving up callbacks on server destructionDavid Howells1-3/+5
When a server record is destroyed, we want to send a message to the server telling it that we're giving up all the callbacks it has promised us. Apply two fixes to this: (1) Only send the FS.GiveUpAllCallBacks message if we actually got a callback from that server. We assume this to be the case if we performed at least one successful FS operation on that server. (2) Send it to the address last used for that server rather than always picking the first address in the list (which might be unreachable). Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-20afs: Fix server record deletionDavid Howells1-1/+8
AFS server records get removed from the net->fs_servers tree when they're deleted, but not from the net->fs_addresses{4,6} lists, which can lead to an oops in afs_find_server() when a server record has been removed, for instance during rmmod. Fix this by deleting the record from the by-address lists before posting it for RCU destruction. The reason this hasn't been noticed before is that the fileserver keeps probing the local cache manager, thereby keeping the service record alive, so the oops would only happen when a fileserver eventually gets bored and stops pinging or if the module gets rmmod'd and a call comes in from the fileserver during the window between the server records being destroyed and the socket being closed. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c ... Workqueue: kafsd afs_process_async_call [kafs] RIP: 0010:afs_find_server+0x271/0x36f [kafs] ... Call Trace: afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs] afs_deliver_to_call+0x1ee/0x5e8 [kafs] afs_process_async_call+0x5b/0xd0 [kafs] process_one_work+0x2c2/0x504 worker_thread+0x1d4/0x2ac kthread+0x11f/0x127 ret_from_fork+0x24/0x30 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-09afs: Fix checker warningsDavid Howells1-6/+8
Fix warnings raised by checker, including: (*) Warnings raised by unequal comparison for the purposes of sorting, where the endianness doesn't matter: fs/afs/addr_list.c:246:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:246:30: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:248:21: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:248:49: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:283:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:283:30: warning: restricted __be16 degrades to integer (*) afs_set_cb_interest() is not actually used and can be removed. (*) afs_cell_gc_delay() should be provided with a sysctl. (*) afs_cell_destroy() needs to use rcu_access_pointer() to read cell->vl_addrs. (*) afs_init_fs_cursor() should be static. (*) struct afs_vnode::permit_cache needs to be marked __rcu. (*) afs_server_rcu() needs to use rcu_access_pointer(). (*) afs_destroy_server() should use rcu_access_pointer() on server->addresses as the server object is no longer accessible. (*) afs_find_server() casts __be16/__be32 values to int in order to directly compare them for the purpose of finding a match in a list, but is should also annotate the cast with __force to avoid checker warnings. (*) afs_check_permit() accesses vnode->permit_cache outside of the RCU readlock, though it doesn't then access the value; the extraneous access is deleted. False positives: (*) Conditional locking around the code in xdr_decode_AFSFetchStatus. This can be dealt with in a separate patch. fs/afs/fsclient.c:148:9: warning: context imbalance in 'xdr_decode_AFSFetchStatus' - different lock contexts for basic block (*) Incorrect handling of seq-retry lock context balance: fs/afs/inode.c:455:38: warning: context imbalance in 'afs_getattr' - different lock contexts for basic block fs/afs/server.c:52:17: warning: context imbalance in 'afs_find_server' - different lock contexts for basic block fs/afs/server.c:128:17: warning: context imbalance in 'afs_find_server_by_uuid' - different lock contexts for basic block Errors: (*) afs_lookup_cell_rcu() needs to break out of the seq-retry loop, not go round again if it successfully found the workstation cell. (*) Fix UUID decode in afs_deliver_cb_probe_uuid(). (*) afs_cache_permit() has a missing rcu_read_unlock() before one of the jumps to the someone_else_changed_it label. Move the unlock to after the label. (*) afs_vl_get_addrs_u() is using ntohl() rather than htonl() when encoding to XDR. (*) afs_deliver_yfsvl_get_endpoints() is using htonl() rather than ntohl() when decoding from XDR. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-20sched/wait, fs/afs: Convert wait_on_atomic_t() usage to the new ↵Peter Zijlstra1-3/+3
wait_var_event() API The old wait_on_atomic_t() is going to get removed, use the more flexible wait_var_event() API instead. No change in functionality. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-13afs: Make use of the YFS service upgrade to fully support IPv6David Howells1-1/+4
YFS VL servers offer an upgraded Volume Location service that can return IPv6 addresses to fileservers and volume servers in addition to IPv4 addresses using the YFSVL.GetEndpoints operation which we should use if it's available. To this end: (1) Make rxrpc_kernel_recv_data() return the call's current service ID so that the caller can detect service upgrade and see what the service was upgraded to. (2) When we see a VL server address we haven't seen before, send a VL.GetCapabilities operation to it with the service upgrade bit set. If we get an upgrade to the YFS VL service, change the service ID in the address list for that address to use the upgraded service and set a flag to note that this appears to be a YFS-compatible server. (3) If, when a server's addresses are being looked up, we note that we previously detected a YFS-compatible server, then send the YFSVL.GetEndpoints operation rather than VL.GetAddrsU. (4) Build a fileserver address list from the reply of YFSVL.GetEndpoints, including both IPv4 and IPv6 addresses. Volume server addresses are discarded. (5) The address list is sorted by address and port now, instead of just address. This allows multiple servers on the same host sitting on different ports. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Overhaul volume and server record caching and fileserver rotationDavid Howells1-213/+537
The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Add an address list conceptDavid Howells1-23/+47
Add an RCU replaceable address list structure to hold a list of server addresses. The list also holds the To this end: (1) A cell's VL server address list can be loaded directly via insmod or echo to /proc/fs/afs/cells or dynamically from a DNS query for AFSDB or SRV records. (2) Anyone wanting to use a cell's VL server address must wait until the cell record comes online and has tried to obtain some addresses. (3) An FS server's address list, for the moment, has a single entry that is the key to the server list. This will change in the future when a server is instead keyed on its UUID and the VL.GetAddrsU operation is used. (4) An 'address cursor' concept is introduced to handle iteration through the address list. This is passed to the afs_make_call() as, in the future, stuff (such as abort code) that doesn't outlast the call will be returned in it. In the future, we might want to annotate the list with information about how each address fares. We might then want to propagate such annotations over address list replacement. Whilst we're at it, we allow IPv6 addresses to be specified in colon-delimited lists by enclosing them in square brackets. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Overhaul the callback handlingDavid Howells1-17/+4
Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Allow IPv6 address specification of VL serversDavid Howells1-5/+0
Allow VL server specifications to be given IPv6 addresses as well as IPv4 addresses, for example as: echo add foo.org 1111:2222:3333:0:4444:5555:6666:7777 >/proc/fs/afs/cells Note that ':' is the expected separator for separating IPv4 addresses, but if a ',' is detected or no '.' is detected in the string, the delimiter is switched to ','. This also works with DNS AFSDB or SRV record strings fetched by upcall from userspace. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Keep and pass sockaddr_rxrpc addresses rather than in_addrDavid Howells1-15/+16
Keep and pass sockaddr_rxrpc addresses around rather than keeping and passing in_addr addresses to allow for the use of IPv6 and non-standard port numbers in future. This also allows the port and service_id fields to be removed from the afs_call struct. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Push the net ns pointer to more placesDavid Howells1-4/+3
Push the network namespace pointer to more places in AFS, including the afs_server structure (which doesn't hold a ref on the netns). In particular, afs_put_cell() now takes requires a net ns parameter so that it can safely alter the netns after decrementing the cell usage count - the cell will be deallocated by a background thread after being cached for a period, which means that it's not safe to access it after reducing its usage count. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Fix server reapingDavid Howells1-8/+51
Fix server reaping and make sure it's all done before we start trying to purge cells, given that servers currently pin cells. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Lay the groundwork for supporting network namespacesDavid Howells1-43/+39
Lay the groundwork for supporting network namespaces (netns) to the AFS filesystem by moving various global features to a network-namespace struct (afs_net) and providing an instance of this as a temporary global variable that everything uses via accessor functions for the moment. The following changes have been made: (1) Store the netns in the superblock info. This will be obtained from the mounter's nsproxy on a manual mount and inherited from the parent superblock on an automount. (2) The cell list is made per-netns. It can be viewed through /proc/net/afs/cells and also be modified by writing commands to that file. (3) The local workstation cell is set per-ns in /proc/net/afs/rootcell. This is unset by default. (4) The 'rootcell' module parameter, which sets a cell and VL server list modifies the init net namespace, thereby allowing an AFS root fs to be theoretically used. (5) The volume location lists and the file lock manager are made per-netns. (6) The AF_RXRPC socket and associated I/O bits are made per-ns. The various workqueues remain global for the moment. Changes still to be made: (1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced from the old name. (2) A per-netns subsys needs to be registered for AFS into which it can store its per-netns data. (3) Rather than the AF_RXRPC socket being opened on module init, it needs to be opened on the creation of a superblock in that netns. (4) The socket needs to be closed when the last superblock using it is destroyed and all outstanding client calls on it have been completed. This prevents a reference loop on the namespace. (5) It is possible that several namespaces will want to use AFS, in which case each one will need its own UDP port. These can either be set through /proc/net/afs/cm_port or the kernel can pick one at random. The init_ns gets 7001 by default. Other issues that need resolving: (1) The DNS keyring needs net-namespacing. (2) Where do upcalls go (eg. DNS request-key upcall)? (3) Need something like open_socket_in_file_ns() syscall so that AFS command line tools attempting to operate on an AFS file/volume have their RPC calls go to the right place. Signed-off-by: David Howells <dhowells@redhat.com>
2017-03-16afs: Migrate vlocation fields to 64-bitTina Ruchandani1-3/+3
get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs's vlocation record to use ktime_get_real_seconds() instead, for the fields time_of_death and update_at. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-30rxrpc: Provide a way for AFS to ask for the peer address of a callDavid Howells1-3/+8
Provide a function so that kernel users, such as AFS, can ask for the peer address of a call: void rxrpc_kernel_get_peer(struct rxrpc_call *call, struct sockaddr_rxrpc *_srx); In the future the kernel service won't get sk_buffs to look inside. Further, this allows us to hide any canonicalisation inside AF_RXRPC for when IPv6 support is added. Also propagate this through to afs_find_server() and issue a warning if we can't handle the address family yet. Signed-off-by: David Howells <dhowells@redhat.com>
2012-08-13workqueue: use mod_delayed_work() instead of cancel + queueTejun Heo1-8/+2
Convert delayed_work users doing cancel_delayed_work() followed by queue_delayed_work() to mod_delayed_work(). Most conversions are straight-forward. Ones worth mentioning are, * drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always use mod_delayed_work() and cancel loop in edac_mc_reset_delay_period() is dropped. * drivers/platform/x86/thinkpad_acpi.c: No need to remember whether watchdog is active or not. @fan_watchdog_active and related code dropped. * drivers/power/charger-manager.c: Seemingly a lot of delayed_work_pending() abuse going on here. [delayed_]work_pending() are unsynchronized and racy when used like this. I converted one instance in fullbatt_handler(). Please conver the rest so that it invokes workqueue APIs for the intended target state rather than trying to game work item pending state transitions. e.g. if timer should be modified - call mod_delayed_work(), canceled - call cancel_delayed_work[_sync](). * drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling() simplified. Note that round_jiffies() calls in this function are meaningless. round_jiffies() work on absolute jiffies not delta delay used by delayed_work. v2: Tomi pointed out that __cancel_delayed_work() users can't be safely converted to mod_delayed_work(). They could be calling it from irq context and if that happens while delayed_work_timer_fn() is running, it could deadlock. __cancel_delayed_work() users are dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Doug Thompson <dougthompson@xmission.com> Cc: David Airlie <airlied@linux.ie> Cc: Roland Dreier <roland@kernel.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Johannes Berg <johannes@sipsolutions.net>
2011-01-14afs: add afs_wq and use it instead of the system workqueueTejun Heo1-6/+7
flush_scheduled_work() is going away. afs needs to make sure all the works it has queued have finished before being unloaded and there can be arbitrary number of pending works. Add afs_wq and use it as the flush domain instead of the system workqueue. Also, convert cancel_delayed_work() + flush_scheduled_work() to cancel_delayed_work_sync() in afs_mntpt_kill_timer(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-01AFS: Fix possible null pointer dereference in afs_alloc_server()Denis Kirjanov1-2/+3
Fix a possible null pointer dereference in afs_alloc_server(): the server pointer is NULL if there was an allocation failure, and under such a condition, we can't dereference it in the _leave() statement. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-31fs: replace NIPQUAD()Harvey Harrison1-5/+4
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17fs/afs/: possible cleanupsAdrian Bunk1-1/+1
This patch contains the following possible cleanups: - make the following needlessly global functions static: - rxrpc.c: afs_send_pages() - vlocation.c: afs_vlocation_queue_for_updates() - write.c: afs_writepages_region() - make the following needlessly global variables static: - mntpt.c: afs_mntpt_expiry_timeout - proc.c: afs_vlocation_states[] - server.c: afs_server_timeout - vlocation.c: afs_vlocation_timeout - vlocation.c: afs_vlocation_update_timeout - #if 0 the following unused function: - cell.c: afs_get_cell_maybe() - #if 0 the following unused variables: - callback.c: afs_vnode_update_timeout - cmservice.c: struct afs_cm_workqueue Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09AFS: AFS fixupsDavid Howells1-0/+3
Make some miscellaneous changes to the AFS filesystem: (1) Assert RCU barriers on module exit to make sure RCU has finished with callbacks in this module. (2) Correctly handle the AFS server returning a zero-length read. (3) Split out data zapping calls into one function (afs_zap_data). (4) Rename some afs_file_*() functions to afs_*() where they apply to non-regular files too. (5) Be consistent about the presentation of volume ID:vnode ID in debugging output. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-26[AFS]: Add "directory write" support.David Howells1-0/+2
Add support for the create, link, symlink, unlink, mkdir, rmdir and rename VFS operations to the in-kernel AFS filesystem. Also: (1) Fix dentry and inode revalidation. d_revalidate should only look at state of the dentry. Revalidation of the contents of an inode pointed to by a dentry is now separate. (2) Fix afs_lookup() to hash negative dentries as well as positive ones. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.David Howells1-394/+230
Make the in-kernel AFS filesystem use AF_RXRPC instead of the old RxRPC code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AFS]: Clean up the AFS sourcesDavid Howells1-30/+17
Clean up the AFS sources. Also remove references to AFS keys. RxRPC keys are used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-07[PATCH] affs: replace kmalloc+memset with kzallocYan Burman1-2/+1
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] fs: use list_move()Akinobu Mita1-4/+2
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under fs/. Cc: Ian Kent <raven@themaw.net> Acked-by: Joel Becker <joel.becker@oracle.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Hans Reiser <reiserfs-dev@namesys.com> Cc: Urban Widmark <urban@teststation.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+502
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!