summaryrefslogtreecommitdiffstats
path: root/fs/afs/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-06-02afs: do not send list of client addressesFlorian Westphal1-1/+0
David Howells says: I'm told that there's not really any point populating the list. Current OpenAFS ignores it, as does AuriStor - and IBM AFS 3.6 will do the right thing. The list is actually useless as it's the client's view of the world, not the servers, so if there's any NAT in the way its contents are invalid. Further, it doesn't support IPv6 addresses. On that basis, feel free to make it an empty list and remove all the interface enumeration. V1 of this patch reworked the function to use a new helper for the ifa_list iteration to avoid sparse warnings once the proper __rcu annotations get added in struct in_device later. But, in light of the above, just remove afs_get_ipv4_interfaces. Compile tested only. Cc: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25afs: Implement sillyrename for unlink and renameDavid Howells1-0/+1
Implement sillyrename for AFS unlink and rename, using the NFS variant implementation as a basis. Note that the asynchronous file locking extender/releaser has to be notified with a state change to stop it complaining if there's a race between that and the actual file deletion. A tracepoint, afs_silly_rename, is also added to note the silly rename and the cleanup. The afs_edit_dir tracepoint is given some extra reason indicators and the afs_flock_ev tracepoint is given a silly-delete file lock cancellation indicator. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Probe multiple fileservers simultaneouslyDavid Howells1-1/+3
Send probes to all the unprobed fileservers in a fileserver list on all addresses simultaneously in an attempt to find out the fastest route whilst not getting stuck for 20s on any server or address that we don't get a reply from. This alleviates the problem whereby attempting to access a new server can take a long time because the rotation algorithm ends up rotating through all servers and addresses until it finds one that responds. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Implement YFS support in the fs clientDavid Howells1-1/+2
Implement support for talking to YFS-variant fileservers in the cache manager and the filesystem client. These implement upgraded services on the same port as their AFS services. YFS fileservers provide expanded capabilities over AFS. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24afs: Implement VL server rotationDavid Howells1-0/+2
Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com>
2018-06-15afs: Handle CONFIG_PROC_FS=nDavid Howells1-2/+2
The AFS filesystem depends at the moment on /proc for configuration and also presents information that way - however, this causes a compilation failure if procfs is disabled. Fix it so that the procfs bits aren't compiled in if procfs is disabled. This means that you can't configure the AFS filesystem directly, but it is still usable provided that an up-to-date keyutils is installed to look up cells by SRV or AFSDB DNS records. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Locally edit directory data for mkdir/create/unlink/...David Howells1-0/+1
Locally edit the contents of an AFS directory upon a successful inode operation that modifies that directory (such as mkdir, create and unlink) so that we can avoid the current practice of re-downloading the directory after each change. This is viable provided that the directory version number we get back from the modifying RPC op is exactly incremented by 1 from what we had previously. The data in the directory contents is in a defined format that we have to parse locally to perform lookups and readdir, so modifying isn't a problem. If the edit fails, we just clear the VALID flag on the directory and it will be reloaded next time it is needed. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09afs: Split the dynroot stuff out and give it its own ops tablesDavid Howells1-0/+1
Split the AFS dynamic root stuff out of the main directory handling file and into its own file as they share little in common. The dynamic root code also gets its own dentry and inode ops tables. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Overhaul volume and server record caching and fileserver rotationDavid Howells1-2/+1
The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Move server rotation code into its own fileDavid Howells1-0/+1
Move server rotation code into its own file. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13afs: Add an address list conceptDavid Howells1-0/+1
Add an RCU replaceable address list structure to hold a list of server addresses. The list also holds the To this end: (1) A cell's VL server address list can be loaded directly via insmod or echo to /proc/fs/afs/cells or dynamically from a DNS query for AFSDB or SRV records. (2) Anyone wanting to use a cell's VL server address must wait until the cell record comes online and has tried to obtain some addresses. (3) An FS server's address list, for the moment, has a single entry that is the key to the server list. This will change in the future when a server is instead keyed on its UUID and the VL.GetAddrsU operation is used. (4) An 'address cursor' concept is introduced to handle iteration through the address list. This is passed to the afs_make_call() as, in the future, stuff (such as abort code) that doesn't outlast the call will be returned in it. In the future, we might want to annotate the list with information about how each address fares. We might then want to propagate such annotations over address list replacement. Whilst we're at it, we allow IPv6 addresses to be specified in colon-delimited lists by enclosing them in square brackets. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-09afs: Add metadata xattrsDavid Howells1-1/+2
Add xattrs to allow the user to get/set metadata in lieu of having pioctl() available. The following xattrs are now available: - "afs.cell" The name of the cell in which the vnode's volume resides. - "afs.fid" The volume ID, vnode ID and vnode uniquifier of the file as three hex numbers separated by colons. - "afs.volume" The name of the volume in which the vnode resides. For example: # getfattr -d -m ".*" /mnt/scratch getfattr: Removing leading '/' from absolute path names # file: mnt/scratch afs.cell="mycell.myorg.org" afs.fid="10000b:1:1" afs.volume="scratch" Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03FS-Cache: Make kAFS use FS-CacheDavid Howells1-0/+3
The attached patch makes the kAFS filesystem in fs/afs/ use FS-Cache, and through it any attached caches. The kAFS filesystem will use caching automatically if it's available. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2007-07-16AFS: implement file lockingDavid Howells1-0/+1
Implement file locking for AFS. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09AFS: implement basic file write supportDavid Howells1-1/+2
Implement support for writing to regular AFS files, including: (1) write (2) truncate (3) fsync, fdatasync (4) chmod, chown, chgrp, utime. AFS writeback attempts to batch writes into as chunks as large as it can manage up to the point that it writes back 65535 pages in one chunk or it meets a locked page. Furthermore, if a page has been written to using a particular key, then should another write to that page use some other key, the first write will be flushed before the second is allowed to take place. If the first write fails due to a security error, then the page will be scrapped and reread before the second write takes place. If a page is dirty and the callback on it is broken by the server, then the dirty data is not discarded (same behaviour as NFS). Shared-writable mappings are not supported by this patch. [akpm@linux-foundation.org: fix a bunch of warnings] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-03[AFS]: Replace rtnetlink client by direct dev_base walkingPatrick McHardy1-1/+1
Replace the large and complicated rtnetlink client by two simple functions for getting the MAC address for the first ethernet device and building a list of IPv4 addresses. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AFS]: Add support for the CB.GetCapabilities operation.David Howells1-0/+1
Add support for the CB.GetCapabilities operation with which the fileserver can ask the client for the following information: (1) The list of network interfaces it has available as IPv4 address + netmask plus the MTUs. (2) The client's UUID. (3) The extended capabilities of the client, for which the only current one is unified error mapping (abort code interpretation). To support this, the patch adds the following routines to AFS: (1) A function to iterate through all the network interfaces using RTNETLINK to extract IPv4 addresses and MTUs. (2) A function to iterate through all the network interfaces using RTNETLINK to pull out the MAC address of the lowest index interface to use in UUID construction. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AFS]: Add security support.David Howells1-0/+1
Add security support to the AFS filesystem. Kerberos IV tickets are added as RxRPC keys are added to the session keyring with the klog program. open() and other VFS operations then find this ticket with request_key() and either use it immediately (eg: mkdir, unlink) or attach it to a file descriptor (open). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.David Howells1-2/+1
Make the in-kernel AFS filesystem use AF_RXRPC instead of the old RxRPC code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[AFS]: Clean up the AFS sourcesDavid Howells1-2/+0
Clean up the AFS sources. Also remove references to AFS keys. RxRPC keys are used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+28
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!