summaryrefslogtreecommitdiffstats
path: root/fs/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-09-18Merge tag 'fsverity-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fs-verity support from Eric Biggers: "fs-verity is a filesystem feature that provides Merkle tree based hashing (similar to dm-verity) for individual readonly files, mainly for the purpose of efficient authenticity verification. This pull request includes: (a) The fs/verity/ support layer and documentation. (b) fs-verity support for ext4 and f2fs. Compared to the original fs-verity patchset from last year, the UAPI to enable fs-verity on a file has been greatly simplified. Lots of other things were cleaned up too. fs-verity is planned to be used by two different projects on Android; most of the userspace code is in place already. Another userspace tool ("fsverity-utils"), and xfstests, are also available. e2fsprogs and f2fs-tools already have fs-verity support. Other people have shown interest in using fs-verity too. I've tested this on ext4 and f2fs with xfstests, both the existing tests and the new fs-verity tests. This has also been in linux-next since July 30 with no reported issues except a couple minor ones I found myself and folded in fixes for. Ted and I will be co-maintaining fs-verity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: f2fs: add fs-verity support ext4: update on-disk format documentation for fs-verity ext4: add fs-verity read support ext4: add basic fs-verity support fs-verity: support builtin file signatures fs-verity: add SHA-512 support fs-verity: implement FS_IOC_MEASURE_VERITY ioctl fs-verity: implement FS_IOC_ENABLE_VERITY ioctl fs-verity: add data verification hooks for ->readpages() fs-verity: add the hook for file ->setattr() fs-verity: add the hook for file ->open() fs-verity: add inode and superblock fields fs-verity: add Kconfig and the helper functions for hashing fs: uapi: define verity bit for FS_IOC_GETFLAGS fs-verity: add UAPI header fs-verity: add MAINTAINERS file entry fs-verity: add a documentation file
2019-08-24erofs: move erofs out of stagingGao Xiang1-0/+1
EROFS filesystem has been merged into linux-staging for a year. EROFS is designed to be a better solution of saving extra storage space with guaranteed end-to-end performance for read-only files with the help of reduced metadata, fixed-sized output compression and decompression inplace technologies. In the past year, EROFS was greatly improved by many people as a staging driver, self-tested, betaed by a large number of our internal users, successfully applied to almost all in-service HUAWEI smartphones as the part of EMUI 9.1 and proven to be stable enough to be moved out of staging. EROFS is a self-contained filesystem driver. Although there are still some TODOs to be more generic, we have a dedicated team actively keeping on working on EROFS in order to make it better with the evolution of Linux kernel as the other in-kernel filesystems. As Pavel suggested, it's better to do as one commit since git can do moves and all histories will be saved in this way. Let's promote it from staging and enhance it more actively as a "real" part of kernel for more wider scenarios! Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Pavel Machek <pavel@denx.de> Cc: David Sterba <dsterba@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J . Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Richard Weinberger <richard@nod.at> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Li Guifu <bluce.liguifu@huawei.com> Cc: Fang Wei <fangwei1@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Link: https://lore.kernel.org/r/20190822213659.5501-1-hsiangkao@aol.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-28fs-verity: add Kconfig and the helper functions for hashingEric Biggers1-0/+1
Add the beginnings of the fs/verity/ support layer, including the Kconfig option and various helper functions for hashing. To start, only SHA-256 is supported, but other hash algorithms can easily be added. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-17iomap: move the main iteration code into a separate fileDarrick J. Wong1-1/+0
Move the main iteration code into a separate file so that we can group related functions in a single file instead of having a single enormous source file. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-07-15iomap: start moving code to fs/iomap/Darrick J. Wong1-0/+1
Create the build infrastructure we need to start migrating iomap code to fs/iomap/ from fs/iomap.c. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-05-07Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Add as a feature case-insensitive directories (the casefold feature) using Unicode 12.1. Also, the usual largish number of cleanups and bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits) ext4: export /sys/fs/ext4/feature/casefold if Unicode support is present ext4: fix ext4_show_options for file systems w/o journal unicode: refactor the rule for regenerating utf8data.h docs: ext4.rst: document case-insensitive directories ext4: Support case-insensitive file name lookups ext4: include charset encoding information in the superblock MAINTAINERS: add Unicode subsystem entry unicode: update unicode database unicode version 12.1.0 unicode: introduce test module for normalized utf8 implementation unicode: implement higher level API for string handling unicode: reduce the size of utf8data[] unicode: introduce code for UTF-8 normalization unicode: introduce UTF-8 character database ext4: actually request zeroing of inode table after grow ext4: cond_resched in work-heavy group loops ext4: fix use-after-free race with debug_want_extra_isize ext4: avoid drop reference to iloc.bh twice ext4: ignore e_value_offs for xattrs with value-in-ea-inode ext4: protect journal inode's blocks using block_validity ext4: use BUG() instead of BUG_ON(1) ...
2019-04-25unicode: introduce UTF-8 character databaseGabriel Krisman Bertazi1-0/+1
The decomposition and casefolding of UTF-8 characters are described in a prefix tree in utf8data.h, which is a generate from the Unicode Character Database (UCD), published by the Unicode Consortium, and should not be edited by hand. The structures in utf8data.h are meant to be used for lookup operations by the unicode subsystem, when decoding a utf-8 string. mkutf8data.c is the source for a program that generates utf8data.h. It was written by Olaf Weber from SGI and originally proposed to be merged into Linux in 2014. The original proposal performed the compatibility decomposition, NFKD, but the current version was modified by me to do canonical decomposition, NFD, as suggested by the community. The changes from the original submission are: * Rebase to mainline. * Fix out-of-tree-build. * Update makefile to build 11.0.0 ucd files. * drop references to xfs. * Convert NFKD to NFD. * Merge back robustness fixes from original patch. Requested by Dave Chinner. The original submission is archived at: <https://linux-xfs.oss.sgi.narkive.com/Xx10wjVY/rfc-unicode-utf-8-support-for-xfs> The utf8data.h file can be regenerated using the instructions in fs/unicode/README.utf8data. - Notes on the update from 8.0.0 to 11.0: The structure of the ucd files and special cases have not experienced any changes between versions 8.0.0 and 11.0.0. 8.0.0 saw the addition of Cherokee LC characters, which is an interesting case for case-folding. The update is accompanied by new tests on the test_ucd module to catch specific cases. No changes to mkutf8data script were required for the updates. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-20vfs: syscall: Add fsopen() to prepare for superblock creationDavid Howells1-1/+1
Provide an fsopen() system call that starts the process of preparing to create a superblock that will then be mountable, using an fd as a context handle. fsopen() is given the name of the filesystem that will be used: int mfd = fsopen(const char *fsname, unsigned int flags); where flags can be 0 or FSOPEN_CLOEXEC. For example: sfd = fsopen("ext4", FSOPEN_CLOEXEC); fsconfig(sfd, FSCONFIG_SET_PATH, "source", "/dev/sda1", AT_FDCWD); fsconfig(sfd, FSCONFIG_SET_FLAG, "noatime", NULL, 0); fsconfig(sfd, FSCONFIG_SET_FLAG, "acl", NULL, 0); fsconfig(sfd, FSCONFIG_SET_FLAG, "user_xattr", NULL, 0); fsconfig(sfd, FSCONFIG_SET_STRING, "sb", "1", 0); fsconfig(sfd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); fsinfo(sfd, NULL, ...); // query new superblock attributes mfd = fsmount(sfd, FSMOUNT_CLOEXEC, MS_RELATIME); move_mount(mfd, "", sfd, AT_FDCWD, "/mnt", MOVE_MOUNT_F_EMPTY_PATH); sfd = fsopen("afs", -1); fsconfig(fd, FSCONFIG_SET_STRING, "source", "#grand.central.org:root.cell", 0); fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); mfd = fsmount(sfd, 0, MS_NODEV); move_mount(mfd, "", sfd, AT_FDCWD, "/mnt", MOVE_MOUNT_F_EMPTY_PATH); If an error is reported at any step, an error message may be available to be read() back (ENODATA will be reported if there isn't an error available) in the form: "e <subsys>:<problem>" "e SELinux:Mount on mountpoint not permitted" Once fsmount() has been called, further fsconfig() calls will incur EBUSY, even if the fsmount() fails. read() is still possible to retrieve error information. The fsopen() syscall creates a mount context and hangs it of the fd that it returns. Netlink is not used because it is optional and would make the core VFS dependent on the networking layer and also potentially add network namespace issues. Note that, for the moment, the caller must have SYS_CAP_ADMIN to use fsopen(). Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-api@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-20Make anon_inodes unconditionalDavid Howells1-1/+1
Make the anon_inodes facility unconditional so that it can be used by core VFS code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-12Merge branch 'work.mount' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount infrastructure updates from Al Viro: "The rest of core infrastructure; no new syscalls in that pile, but the old parts are switched to new infrastructure. At that point conversions of individual filesystems can happen independently; some are done here (afs, cgroup, procfs, etc.), there's also a large series outside of that pile dealing with NFS (quite a bit of option-parsing stuff is getting used there - it's one of the most convoluted filesystems in terms of mount-related logics), but NFS bits are the next cycle fodder. It got seriously simplified since the last cycle; documentation is probably the weakest bit at the moment - I considered dropping the commit introducing Documentation/filesystems/mount_api.txt (cutting the size increase by quarter ;-), but decided that it would be better to fix it up after -rc1 instead. That pile allows to do followup work in independent branches, which should make life much easier for the next cycle. fs/super.c size increase is unpleasant; there's a followup series that allows to shrink it considerably, but I decided to leave that until the next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits) afs: Use fs_context to pass parameters over automount afs: Add fs_context support vfs: Add some logging to the core users of the fs_context log vfs: Implement logging through fs_context vfs: Provide documentation for new mount API vfs: Remove kern_mount_data() hugetlbfs: Convert to fs_context cpuset: Use fs_context kernfs, sysfs, cgroup, intel_rdt: Support fs_context cgroup: store a reference to cgroup_ns into cgroup_fs_context cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper cgroup_do_mount(): massage calling conventions cgroup: stash cgroup_root reference into cgroup_fs_context cgroup2: switch to option-by-option parsing cgroup1: switch to option-by-option parsing cgroup: take options parsing into ->parse_monolithic() cgroup: fold cgroup1_mount() into cgroup1_get_tree() cgroup: start switching to fs_context ipc: Convert mqueue fs to fs_context proc: Add fs_context support to procfs ...
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+0
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-03-08Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull io_uring IO interface from Jens Axboe: "Second attempt at adding the io_uring interface. Since the first one, we've added basic unit testing of the three system calls, that resides in liburing like the other unit tests that we have so far. It'll take a while to get full coverage of it, but we're working towards it. I've also added two basic test programs to tools/io_uring. One uses the raw interface and has support for all the various features that io_uring supports outside of standard IO, like fixed files, fixed IO buffers, and polled IO. The other uses the liburing API, and is a simplified version of cp(1). This adds support for a new IO interface, io_uring. io_uring allows an application to communicate with the kernel through two rings, the submission queue (SQ) and completion queue (CQ) ring. This allows for very efficient handling of IOs, see the v5 posting for some basic numbers: https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/ Outside of just efficiency, the interface is also flexible and extendable, and allows for future use cases like the upcoming NVMe key-value store API, networked IO, and so on. It also supports async buffered IO, something that we've always failed to support in the kernel. Outside of basic IO features, it supports async polled IO as well. This particular feature has already been tested at Facebook months ago for flash storage boxes, with 25-33% improvements. It makes polled IO actually useful for real world use cases, where even basic flash sees a nice win in terms of efficiency, latency, and performance. These boxes were IOPS bound before, now they are not. This series adds three new system calls. One for setting up an io_uring instance (io_uring_setup(2)), one for submitting/completing IO (io_uring_enter(2)), and one for aux functions like registrating file sets, buffers, etc (io_uring_register(2)). Through the help of Arnd, I've coordinated the syscall numbers so merge on that front should be painless. Jon did a writeup of the interface a while back, which (except for minor details that have been tweaked) is still accurate. Find that here: https://lwn.net/Articles/776703/ Huge thanks to Al Viro for helping getting the reference cycle code correct, and to Jann Horn for his extensive reviews focused on both security and bugs in general. There's a userspace library that provides basic functionality for applications that don't need or want to care about how to fiddle with the rings directly. It has helpers to allow applications to easily set up an io_uring instance, and submit/complete IO through it without knowing about the intricacies of the rings. It also includes man pages (thanks to Jeff Moyer), and will continue to grow support helper functions and features as time progresses. Find it here: git://git.kernel.dk/liburing Fio has full support for the raw interface, both in the form of an IO engine (io_uring), but also with a small test application (t/io_uring) that can exercise and benchmark the interface" * tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block: io_uring: add a few test tools io_uring: allow workqueue item to handle multiple buffered requests io_uring: add support for IORING_OP_POLL io_uring: add io_kiocb ref count io_uring: add submission polling io_uring: add file set registration net: split out functions related to registering inflight socket files io_uring: add support for pre-mapped user IO buffers block: implement bio helper to add iter bvec pages to bio io_uring: batch io_kiocb allocation io_uring: use fget/fput_many() for file references fs: add fget_many() and fput_many() io_uring: support for IO polling io_uring: add fsync support Add io_uring IO interface
2019-02-28Add io_uring IO interfaceJens Axboe1-0/+1
The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-28vfs: Add configuration parser helpersDavid Howells1-1/+1
Because the new API passes in key,value parameters, match_token() cannot be used with it. Instead, provide three new helpers to aid with parsing: (1) fs_parse(). This takes a parameter and a simple static description of all the parameters and maps the key name to an ID. It returns 1 on a match, 0 on no match if unknowns should be ignored and some other negative error code on a parse error. The parameter description includes a list of key names to IDs, desired parameter types and a list of enumeration name -> ID mappings. [!] Note that for the moment I've required that the key->ID mapping array is expected to be sorted and unterminated. The size of the array is noted in the fsconfig_parser struct. This allows me to use bsearch(), but I'm not sure any performance gain is worth the hassle of requiring people to keep the array sorted. The parameter type array is sized according to the number of parameter IDs and is indexed directly. The optional enum mapping array is an unterminated, unsorted list and the size goes into the fsconfig_parser struct. The function can do some additional things: (a) If it's not ambiguous and no value is given, the prefix "no" on a key name is permitted to indicate that the parameter should be considered negatory. (b) If the desired type is a single simple integer, it will perform an appropriate conversion and store the result in a union in the parse result. (c) If the desired type is an enumeration, {key ID, name} will be looked up in the enumeration list and the matching value will be stored in the parse result union. (d) Optionally generate an error if the key is unrecognised. This is called something like: enum rdt_param { Opt_cdp, Opt_cdpl2, Opt_mba_mpbs, nr__rdt_params }; const struct fs_parameter_spec rdt_param_specs[nr__rdt_params] = { [Opt_cdp] = { fs_param_is_bool }, [Opt_cdpl2] = { fs_param_is_bool }, [Opt_mba_mpbs] = { fs_param_is_bool }, }; const const char *const rdt_param_keys[nr__rdt_params] = { [Opt_cdp] = "cdp", [Opt_cdpl2] = "cdpl2", [Opt_mba_mpbs] = "mba_mbps", }; const struct fs_parameter_description rdt_parser = { .name = "rdt", .nr_params = nr__rdt_params, .keys = rdt_param_keys, .specs = rdt_param_specs, .no_source = true, }; int rdt_parse_param(struct fs_context *fc, struct fs_parameter *param) { struct fs_parse_result parse; struct rdt_fs_context *ctx = rdt_fc2context(fc); int ret; ret = fs_parse(fc, &rdt_parser, param, &parse); if (ret < 0) return ret; switch (parse.key) { case Opt_cdp: ctx->enable_cdpl3 = true; return 0; case Opt_cdpl2: ctx->enable_cdpl2 = true; return 0; case Opt_mba_mpbs: ctx->enable_mba_mbps = true; return 0; } return -EINVAL; } (2) fs_lookup_param(). This takes a { dirfd, path, LOOKUP_EMPTY? } or string value and performs an appropriate path lookup to convert it into a path object, which it will then return. If the desired type was a blockdev, the type of the looked up inode will be checked to make sure it is one. This can be used like: enum foo_param { Opt_source, nr__foo_params }; const struct fs_parameter_spec foo_param_specs[nr__foo_params] = { [Opt_source] = { fs_param_is_blockdev }, }; const char *char foo_param_keys[nr__foo_params] = { [Opt_source] = "source", }; const struct constant_table foo_param_alt_keys[] = { { "device", Opt_source }, }; const struct fs_parameter_description foo_parser = { .name = "foo", .nr_params = nr__foo_params, .nr_alt_keys = ARRAY_SIZE(foo_param_alt_keys), .keys = foo_param_keys, .alt_keys = foo_param_alt_keys, .specs = foo_param_specs, }; int foo_parse_param(struct fs_context *fc, struct fs_parameter *param) { struct fs_parse_result parse; struct foo_fs_context *ctx = foo_fc2context(fc); int ret; ret = fs_parse(fc, &foo_parser, param, &parse); if (ret < 0) return ret; switch (parse.key) { case Opt_source: return fs_lookup_param(fc, &foo_parser, param, &parse, &ctx->source); default: return -EINVAL; } } (3) lookup_constant(). This takes a table of named constants and looks up the given name within it. The table is expected to be sorted such that bsearch() be used upon it. Possibly I should require the table be terminated and just use a for-loop to scan it instead of using bsearch() to reduce hassle. Tables look something like: static const struct constant_table bool_names[] = { { "0", false }, { "1", true }, { "false", false }, { "no", false }, { "true", true }, { "yes", true }, }; and a lookup is done with something like: b = lookup_constant(bool_names, param->string, -1); Additionally, optional validation routines for the parameter description are provided that can be enabled at compile time. A later patch will invoke these when a filesystem is registered. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-05scsi: fs: remove exofsChristoph Hellwig1-1/+0
This was an example for using the SCSI OSD protocol, which we're trying to remove. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-30vfs: Introduce fs_context, switch vfs_kern_mount() to it.David Howells1-1/+2
Introduce a filesystem context concept to be used during superblock creation for mount and superblock reconfiguration for remount. This is allocated at the beginning of the mount procedure and into it is placed: (1) Filesystem type. (2) Namespaces. (3) Source/Device names (there may be multiple). (4) Superblock flags (SB_*). (5) Security details. (6) Filesystem-specific data, as set by the mount options. Accessor functions are then provided to set up a context, parameterise it from monolithic mount data (the data page passed to mount(2)) and tear it down again. A legacy wrapper is provided that implements what will be the basic operations, wrapping access to filesystems that aren't yet aware of the fs_context. Finally, vfs_kern_mount() is changed to make use of the fs_context and mount_fs() is replaced by vfs_get_tree(), called from vfs_kern_mount(). [AV -- add missing kstrdup()] [AV -- put_cred() can be unconditional - fc->cred can't be NULL] [AV -- take legacy_validate() contents into legacy_parse_monolithic()] [AV -- merge KERNEL_MOUNT and USER_MOUNT] [AV -- don't unlock superblock on success return from vfs_get_tree()] [AV -- kill 'reference' argument of init_fs_context()] Signed-off-by: David Howells <dhowells@redhat.com> Co-developed-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-01-21fs: common implementation of file typePhillip Potter1-1/+2
Many file systems use a copy&paste implementation of dirent to on-disk file type conversions. Create a common implementation to be used by file systems with some useful conversion helpers to reduce open coded file type conversions in file system code. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-11autofs: remove left-over autofs4 stubsLinus Torvalds1-1/+0
There's no need to retain the fs/autofs4 directory for backward compatibility. Adding an AUTOFS4_FS fragment to the autofs Kconfig and a module alias for autofs4 is sufficient for almost all cases. Not keeping fs/autofs4 remnants will prevent "insmod <path>/autofs4/autofs4.ko" from working but this shouldn't be used in automation scripts rather than modprobe(8). There were some comments about things to look out for with the module rename in the fs/autofs4/Kconfig that is removed by this patch, see the commit patch if you are interested. One potential problem with this change is that when the fs/autofs/Kconfig fragment for AUTOFS4_FS is removed any AUTOFS4_FS entries will be removed from the kernel config, resulting in no autofs file system being built if there is no AUTOFS_FS entry also. This would have also happened if the fs/autofs4 remnants had remained and is most likely to be a problem with automated builds. Please check your build configurations before the removal which will occur after the next couple of kernel releases. Acked-by: Ian Kent <raven@themaw.net> [ With edits and commit message from Ian Kent ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07autofs: create autofs Kconfig and MakefileIan Kent1-0/+1
Create Makefile and Kconfig for autofs module. [raven@themaw.net: make autofs4 Kconfig depend on AUTOFS_FS] Link: http://lkml.kernel.org/r/152687649097.8263.7046086367407522029.stgit@pluto.themaw.net Link: http://lkml.kernel.org/r/152626705591.28589.356365986974038383.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-29split d_path() and friends into a separate fileAl Viro1-1/+1
Those parts of fs/dcache.c are pretty much self-contained. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28ncpfs: move net/ncpfs to drivers/staging/ncpfsStephen Hemminger1-1/+0
The Netware Core Protocol is a file system that talks to Netware clients over IPX. Since IPX has been dead for many years move the file system into staging for eventual interment. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-14logfs: remove from treeChristoph Hellwig1-1/+0
Logfs was introduced to the kernel in 2009, and hasn't seen any non drive-by changes since 2012, while having lots of unsolved issues including the complete lack of error handling, with more and more issues popping up without any fixes. The logfs.org domain has been bouncing from a mail, and the maintainer on the non-logfs.org domain hasn't repsonded to past queries either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-21fs: introduce iomap infrastructureChristoph Hellwig1-0/+1
Add infrastructure for multipage buffered writes. This is implemented using an main iterator that applies an actor function to a range that can be written. This infrastucture is used to implement a buffered write helper, one to zero file ranges and one to implement the ->page_mkwrite VM operations. All of them borrow a fair amount of code from fs/buffers. for now by using an internal version of __block_write_begin that gets passed an iomap and builds the corresponding buffer head. The file system is gets a set of paired ->iomap_begin and ->iomap_end calls which allow it to map/reserve a range and get a notification once the write code is finished with it. Based on earlier code from Dave Chinner. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-03-26Merge tag 'ofs-pull-tag-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ...
2016-03-17fs crypto: move per-file encryption from f2fs tree to fs/cryptoJaegeuk Kim1-0/+1
This patch adds the renamed functions moved from the f2fs crypto files. 1. definitions for per-file encryption used by ext4 and f2fs. 2. crypto.c for encrypt/decrypt functions a. IO preparation: - fscrypt_get_ctx / fscrypt_release_ctx b. before IOs: - fscrypt_encrypt_page - fscrypt_decrypt_page - fscrypt_zeroout_range c. after IOs: - fscrypt_decrypt_bio_pages - fscrypt_pullback_bio_page - fscrypt_restore_control_page 3. policy.c supporting context management. a. For ioctls: - fscrypt_process_policy - fscrypt_get_policy b. For context permission - fscrypt_has_permitted_context - fscrypt_inherit_context 4. keyinfo.c to handle permissions - fscrypt_get_encryption_info - fscrypt_free_encryption_info 5. fname.c to support filename encryption a. general wrapper functions - fscrypt_fname_disk_to_usr - fscrypt_fname_usr_to_disk - fscrypt_setup_filename - fscrypt_free_filename b. specific filename handling functions - fscrypt_fname_alloc_buffer - fscrypt_fname_free_buffer 6. Makefile and Kconfig Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Michael Halcrow <mhalcrow@google.com> Signed-off-by: Ildar Muslukhov <ildarm@google.com> Signed-off-by: Uday Savagaonkar <savagaon@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-11-16Orangefs: Merge tag 'v4.4-rc1' into for-nextMike Marshall1-3/+4
Linux 4.4-rc1
2015-10-15ext4: promote ext4 over ext2 in the default probe orderDarrick J. Wong1-3/+4
Prevent clean ext3 filesystems from mounting by default with the ext2 driver (with no journal!) by putting ext4 ahead of ext2 in the default probe order. This will have the effect of mounting ext2 filesystems with ext4.ko by default, which is a safer failure than hoping the user notices that their journalled ext3 is now running without a journal! Users who require ext2.ko for ext2 can either disable ext4.ko or explicitly request ext2 via "mount -t ext2" or "rootfstype=ext2". Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-03Orangefs: kernel client part 7Mike Marshall1-0/+1
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-09-04userfaultfd: buildsystem activationAndrea Arcangeli1-0/+1
This allows to select the userfaultfd during configuration to build it. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-23fs: Remove ext3 filesystem driverJan Kara1-2/+0
The functionality of ext3 is fully supported by ext4 driver. Major distributions (SUSE, RedHat) already use ext4 driver to handle ext3 filesystems for quite some time. There is some ugliness in mm resulting from jbd cleaning buffers in a dirty page without cleaning page dirty bit and also support for buffer bouncing in the block layer when stable pages are required is there only because of jbd. So let's remove the ext3 driver. This saves us some 28k lines of duplicated code. Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz>
2015-05-31um: Remove hppfsRichard Weinberger1-1/+0
hppfs (honeypot procfs) was an attempt to use UML as honeypot. It was never stable nor in heavy use. As Al Viro and Christoph Hellwig pointed some major issues out it is better to let it die. Signed-off-by: Richard Weinberger <richard@nod.at>
2015-04-14Merge tag 'trace-4.1-tracefs' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracefs from Steven Rostedt: "This adds the new tracefs file system. This has been in linux-next for more than one release, as I had it ready for the 4.0 merge window, but a last minute thing that needed to go into Linux first had to be done. That was that perf hard coded the file system number when reading /sys/kernel/debugfs/tracing directory making sure that the path had the debugfs mount # before it would parse the tracing file. This broke other use cases of perf, and the check is removed. Now when mounting /sys/kernel/debug, tracefs is automatically mounted in /sys/kernel/debug/tracing such that old tools will still see that path as expected. But now system admins can mount tracefs directly and not need to mount debugfs, which can expose security issues. A new directory is created when tracefs is configured such that system admins can now mount it separately (/sys/kernel/tracing)" * tag 'trace-4.1-tracefs' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have mkdir and rmdir be part of tracefs tracefs: Add directory /sys/kernel/tracing tracing: Automatically mount tracefs on debugfs/tracing tracing: Convert the tracing facility over to use tracefs tracefs: Add new tracefs file system tracing: Create cmdline tracer options on tracing fs init tracing: Only create tracer options files if directory exists debugfs: Provide a file creation function that also takes an initial size
2015-02-17Merge branch 'parisc-3.20-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc update from Helge Deller: "The major change in here is the removal of the old HP-UX compat code which should have made it possible to load and execute 32-bit HP-UX binaries on PA-RISC Linux. Since it was never functional and since nobody cares about old 32-bit HPUX binaries any longer, it's now time to free up 3200 lines of kernel code (CONFIG_HPUX and CONFIG_BINFMT_SOM). Other than that we wire up the execveat() syscall, fix sparse errors and have some whitespace cleanups" * 'parisc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: fs/binfmt_som: Drop kernel support for HP-UX SOM binaries parisc: Remove unused function parisc: macro whitespace fixes parisc/uaccess: fix sparse errors parisc: hpux - Remove HPUX syscall numbers parisc: hpux - Remove hpux gateway page parisc: hpux - Delete files in hpux subdirectory parisc: hpux - Do not compile hpux subdirectory parisc: hpux - Drop support for HP-UX binaries parisc: Add error checks when building up signal trampoline handler parisc: Wire up execveat syscall
2015-02-17fs/binfmt_som: Drop kernel support for HP-UX SOM binariesHelge Deller1-1/+0
The parisc arch has been the only user of HP-UX SOM binaries. Support for HP-UX executables was never finished and since we now drop support for the HP-UX compat layer anyway, it does not makes sense to keep the BINFMT_SOM support. Cc: linux-fsdevel@vger.kernel.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2015-02-16vfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAXMatthew Wilcox1-1/+1
The fewer Kconfig options we have the better. Use the generic CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16dax,ext2: replace XIP read and write with DAX I/OMatthew Wilcox1-0/+1
Use the generic AIO infrastructure instead of custom read and write methods. In addition to giving us support for AIO, this adds the missing locking between read() and truncate(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-03tracefs: Add new tracefs file systemSteven Rostedt (Red Hat)1-0/+1
Add a separate file system to handle the tracing directory. Currently it is part of debugfs, but that is starting to show its limits. One thing is that in order to access the tracing infrastructure, you need to mount debugfs. As that includes debugging from all sorts of sub systems in the kernel, it is not considered advisable to mount such an all encompassing debugging system. Having the tracing system in its own file systems gives access to the tracing sub system without needing to include all other systems. Another problem with tracing using the debugfs system is that the instances use mkdir to create sub buffers. debugfs does not support mkdir from userspace so to implement it, special hacks were used. By controlling the file system that the tracing infrastructure uses, this can be properly done without hacks. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-10Merge branch 'nsfs' into for-nextAl Viro1-1/+1
2014-12-10take the targets of /proc/*/ns/* symlinks to separate fsAl Viro1-1/+1
New pseudo-filesystem: nsfs. Targets of /proc/*/ns/* live there now. It's not mountable (not even registered, so it's not in /proc/filesystems, etc.). Files on it *are* bindable - we explicitly permit that in do_loopback(). This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well. get_proc_ns() is a macro now (it's simply returning ->i_private; would have been an inline, if not for header ordering headache). proc_ns_inode() is an ex-parrot. The interface used in procfs is ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops). Dentries and inodes are never hashed; a non-counting reference to dentry is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path() if present. See ns_get_path()/ns_prune_dentry/nsfs_evict() for details of that mechanism. As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt; it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets from ns_get_path(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-20ovl: rename filesystem type to "overlay"Miklos Szeredi1-1/+1
Some distributions carry an "old" format of overlayfs while mainline has a "new" format. The distros will possibly want to keep the old overlayfs alongside the new for compatibility reasons. To make it possible to differentiate the two versions change the name of the new one from "overlayfs" to "overlay". Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Andy Whitcroft <apw@canonical.com>
2014-10-24overlay filesystemMiklos Szeredi1-0/+1
Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-08-07take fs_pin stuff to fs/*Al Viro1-1/+1
Add a new field to fs_pin - kill(pin). That's what umount and r/o remount will be calling for all pins attached to vfsmount and superblock resp. Called after bumping the refcount, so it won't go away under us. Dropping the refcount is responsibility of the instance. All generic stuff moved to fs/fs_pin.c; the next step will rip all the knowledge of kernel/acct.c from fs/super.c and fs/namespace.c. After that - death to mnt_pin(); it was intended to be usable as generic mechanism for code that wants to attach objects to vfsmount, so that they would not make the sucker busy and would get killed on umount. Never got it right; it remained acct.c-specific all along. Now it's very close to being killable. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-19block: move ioprio.c from fs/ to block/Jens Axboe1-1/+1
Like commit f9c78b2b, move this block related file outside of fs/ and into the core block directory, block/. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-19block: move bio.c and bio-integrity.c from fs/ to block/Jens Axboe1-2/+1
They really belong in block/, especially now since it's not in drivers/block/ anymore. Additionally, the get_maintainer script gets it wrong when in fs/. Suggested-by: Christoph Hellwig <hch@infradead.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-07kernfs: add CONFIG_KERNFSTejun Heo1-1/+2
As sysfs was kernfs's only user, kernfs has been piggybacking on CONFIG_SYSFS; however, kernfs is scheduled to grow a new user very soon. Introduce a separate config option CONFIG_KERNFS which is to be selected by kernfs users. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-28Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted stuff; the biggest pile here is Christoph's ACL series. Plus assorted cleanups and fixes all over the place... There will be another pile later this week" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits) __dentry_path() fixes vfs: Remove second variable named error in __dentry_path vfs: Is mounted should be testing mnt_ns for NULL or error. Fix race when checking i_size on direct i/o read hfsplus: remove can_set_xattr nfsd: use get_acl and ->set_acl fs: remove generic_acl nfs: use generic posix ACL infrastructure for v3 Posix ACLs gfs2: use generic posix ACL infrastructure jfs: use generic posix ACL infrastructure xfs: use generic posix ACL infrastructure reiserfs: use generic posix ACL infrastructure ocfs2: use generic posix ACL infrastructure jffs2: use generic posix ACL infrastructure hfsplus: use generic posix ACL infrastructure f2fs: use generic posix ACL infrastructure ext2/3/4: use generic posix ACL infrastructure btrfs: use generic posix ACL infrastructure fs: make posix_acl_create more useful fs: make posix_acl_chmod more useful ...
2014-01-26fs: remove generic_aclChristoph Hellwig1-1/+0
And instead convert tmpfs to use the new generic ACL code, with two stub methods provided for in-memory filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25fs: merge xattr_acl.c into posix_acl.cChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-27sysfs, kernfs: add skeletons for kernfsTejun Heo1-1/+1
Core sysfs implementation will be separated into kernfs so that it can be used by other non-kobject users. This patch creates fs/kernfs/ directory and makes boilerplate changes. kernfs interface will be directly based on sysfs_dirent and its forward declaration is moved to include/linux/kernfs.h which is included from include/linux/sysfs.h. sysfs core implementation will be gradually separated out and moved to kernfs. This patch doesn't introduce any functional changes. v2: mount.c added. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>