summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-01-20serial: exar: Add support for Sealevel 7xxxC serial cardsMatthew Howell1-0/+14
Add support for Sealevel 7xxxC serial cards. This patch: * Adds IDs to recognize 7xxxC cards from Sealevel Systems. * Updates exar_pci_probe() to set nr_ports to last two bytes of primary dev ID for these cards. Signed-off-by: Matthew Howell <matthew.howell@sealevel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20VMCI: Use threaded irqs instead of taskletsVishnu Dasa1-30/+19
The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194 Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Suggested-by: Zack Rusin <zackr@vmware.com> Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Fixes: 463713eb6164 ("VMCI: dma dg: add support for DMA datagrams receive") Cc: <stable@vger.kernel.org> # v5.18+ Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bryan Tan <bryantan@vmware.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://lore.kernel.org/r/20221130070511.46558-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Pass bitfield into qcom_scm_assign_memElliot Berman1-9/+6
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of VMIDs. The bitfield is updated with which VMIDs have permissions after the qcom_scm_assign_mem call. This makes it simpler for clients to make qcom_scm_assign_mem calls later, they always pass in same srcvm bitfield and do not need to closely track whether memory was originally shared. When restoring permissions to HLOS, fastrpc is incorrectly using the first VMID directly -- neither the BIT nor the other possible VMIDs the memory was already assigned to. We already have a field intended for this purpose: "perms" in the struct fastrpc_channel_ctx, but it was never used. Start using the perms field. Cc: Abel Vesa <abel.vesa@linaro.org> Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: e90d91190619 ("misc: fastrpc: Add support to secure memory map") Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool") Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> drivers/misc/fastrpc.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) Link: https://lore.kernel.org/r/20230112182313.521467-1-quic_eberman@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20gsmi: fix null-deref in gsmi_get_variableKhazhismel Kumykov1-3/+4
We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi. Fixes: 74c5b31c6618 ("driver: Google EFI SMI") Cc: stable <stable@kernel.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Fix use-after-free race condition for mapsOla Jeppsson1-3/+5
It is possible that in between calling fastrpc_map_get() until map->fl->lock is taken in fastrpc_free_map(), another thread can call fastrpc_map_lookup() and get a reference to a map that is about to be deleted. Rewrite fastrpc_map_get() to only increase the reference count of a map if it's non-zero. Propagate this to callers so they can know if a map is about to be deleted. Fixes this warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate ... Call trace: refcount_warn_saturate [fastrpc_map_get inlined] [fastrpc_map_lookup inlined] fastrpc_map_create fastrpc_internal_invoke fastrpc_device_ioctl __arm64_sys_ioctl invoke_syscall Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Don't remove map on creater_process and device_releaseAbel Vesa1-9/+9
Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0. Fixes: b49f6d83e290 ("misc: fastrpc: Fix a possible double free") Cc: stable <stable@kernel.org> Co-developed-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Fix use-after-free and race in fastrpc_map_findAbel Vesa1-20/+21
Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers. Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation") Cc: stable <stable@kernel.org> Co-developed-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: fix error code in fastrpc_req_mmap()Dan Carpenter1-1/+0
The "err" variable shadows an earlier global variable so this code returns success instead of a negative error code. Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y4XUrMETCl1O6t0A@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20mei: me: add meteor lake point M DIDAlexander Usyskin2-0/+4
Add Meteor Lake Point M device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20221212220247.286019-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20mei: bus: fix unlink on bus in error pathAlexander Usyskin1-4/+8
Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads to call of the mei_cl_unlink without corresponding mei_cl_link. This leads to miscalculation of open_handle_count (decrease without increase). Call unlink in mei_cldev_enable fail path and remove blanket unlink from mei_cl_bus_dev_release. Fixes: 34f1166afd67 ("mei: bus: need to unlink client before freeing") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20Merge tag 'icc-6.2-rc5' of ↵Greg Kroah-Hartman2-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v6.2-rc This contains fixes for a rare boot hang issue that has been reported on the db820c dragonboard. - dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC - interconnect: qcom: msm8996: Provide UFS clocks to A2NoC - interconnect: qcom: msm8996: Fix regmap max_register values - interconnect: qcom: rpm: Use _optional func for provider clocks Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: rpm: Use _optional func for provider clocks interconnect: qcom: msm8996: Fix regmap max_register values interconnect: qcom: msm8996: Provide UFS clocks to A2NoC dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
2023-01-20Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single ↵Greg Kroah-Hartman1-4/+27
IRQ handler" This reverts commit f24771b62a83239f0dce816bddf0f6807f436235 as it is reported to break the build. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com Fixes: f24771b62a83 ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler") Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Valentin Caron <valentin.caron@foss.st.com> # V3 Cc: Marek Vasut <marex@denx.de> Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20net: stmmac: enable all safety features by defaultAndrew Halaney1-0/+14
In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features. Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20i2c: rk3x: fix a bunch of kernel-doc warningsRandy Dunlap1-22/+22
Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c: drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line: * struct i2c_spec_values: drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line: * struct rk3x_i2c_calced_timings: drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line: * struct rk3x_i2c_soc_data: drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a START condition, which triggers a REG_INT_START interrupt. drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Get timing values of I2C specification drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate divider values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate timing values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Setup I2C registers for an I2C operation specified by msgs, num. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: axxia: use 'struct' for kernel-doc notationRandy Dunlap1-1/+1
Add "struct" to prevent this kernel-doc warning: drivers/i2c/busses/i2c-axxia.c:135: warning: cannot understand function prototype: 'struct axxia_i2c_dev ' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20octeontx2-af: add mbox to return CPT_AF_FLT_INT infoSrujana Challa3-0/+56
CPT HW would trigger the CPT AF FLT interrupt when CPT engines hits some uncorrectable errors and AF is the one which receives the interrupt and recovers the engines. This patch adds a mailbox for CPT VFs to request for CPT faulted and recovered engines info. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: update cpt lf alloc mailboxSrujana Challa2-3/+9
The CN10K CPT coprocessor contains a context processor to accelerate updates to the IPsec security association contexts. The context processor contains a context cache. This patch updates CPT LF ALLOC mailbox to config ctx_ilen requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of initial context fetch. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: restore rxc conf after teardown sequenceNithin Dabilpuram1-4/+18
CN10K CPT coprocessor includes a component named RXC which is responsible for reassembly of inner IP packets. RXC has the feature to evict oldest entries based on age/threshold. The age/threshold is being set to minimum values to evict all entries at the time of teardown. This patch adds code to restore timeout and threshold config after teardown sequence is complete as it is global config. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: optimize cpt pf identificationSrujana Challa3-3/+20
Optimize CPT PF identification in mbox handling for faster mbox response by doing it at AF driver probe instead of every mbox message. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: modify FLR sequence for CPTSrujana Challa3-47/+53
On OcteonTX2 platform CPT instruction enqueue is only possible via LMTST operations. The existing FLR sequence mentioned in HRM requires a dummy LMTST to CPT but LMTST can't be submitted from AF driver. So, HW team provided a new sequence to avoid dummy LMTST. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: add mbox for CPT LF resetSrujana Challa2-0/+41
On OcteonTX2 SoC, the admin function (AF) is the only one with all priviliges to configure HW and alloc resources, PFs and it's VFs have to request AF via mailbox for all their needs. This patch adds a new mailbox for CPT VFs to request for CPT LF reset. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: recover CPT engine when it gets faultSrujana Challa1-30/+80
When CPT engine has uncorrectable errors, it will get halted and must be disabled and re-enabled. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge tag 'amd-drm-fixes-6.2-2023-01-19' of ↵Dave Airlie8-18/+33
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-01-19: amdgpu: - Fix display scaling - Fix RN/CZN power reporting on some firmware versions - Colorspace fixes - Fix resource freeing in error case in CS IOCTL - Fix warning on driver unload - GC11 fixes - DCN 3.1.4/5 S/G display workarounds Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230119195908.7670-1-alexander.deucher@amd.com
2023-01-20Merge tag 'drm-misc-fixes-2023-01-19' of ↵Dave Airlie5-10/+17
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A fix for vc4 to address a memory leak when allocating a buffer, a Kconfig fix for panfrost and two fixes for i915 and fb-helper to address some bugs with vga-switcheroo. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat
2023-01-20Merge tag 'drm-intel-fixes-2023-01-19' of ↵Dave Airlie5-10/+23
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Reject display plane with height == 0 (Drew) - re-disable RC6p on Sandy Bridge (Sasa) - Fix hugepages' selftest (Chris) - DG2 hw workarounds (Matt Atwood) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y8mf3/ANNWctpc7R@intel.com
2023-01-19acpi: Fix suspend with Xen PVJuergen Gross1-1/+5
Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway. Fixes: f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230117155724.22940-1-jgross%40suse.com
2023-01-20Merge tag 'drm-msm-fixes-2023-01-16' of ↵Dave Airlie4-4/+19
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.3-rc5 Two GPU fixes which were meant to be part of the previous pull request, but I'd forgotten to fetch from gitlab after the MR was merged so that git tag was applied to the wrong commit. - kexec shutdown fix - fix potential double free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
2023-01-19Merge tag 'printk-for-6.2-rc5' of ↵Linus Torvalds2-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - Prevent a potential deadlock when configuring kgdb console - Fix a kernel doc warning * tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: kernel/printk/printk.c: Fix W=1 kernel-doc warning tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
2023-01-19thermal: core: call put_device() only after device_register() failsViresh Kumar1-3/+10
put_device() shouldn't be called before a prior call to device_register(). __thermal_cooling_device_register() doesn't follow that properly and needs fixing. Also thermal_cooling_device_destroy_sysfs() is getting called unnecessarily on few error paths. Fix all this by placing the calls at the right place. Based on initial work done by Caleb Connolly. Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths") Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()") Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Frank Rowand <frowand.list@gmail.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-19Merge tag 'usb-serial-6.2-rc5' of ↵Greg Kroah-Hartman2-0/+18
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.2-rc5 Here are some new device ids, mostly for Quectel modems. All have been in linux-next with no reported issues." * tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel EM05CN modem USB: serial: option: add Quectel EM05CN (SG) modem USB: serial: cp210x: add SCALANCE LPE-9000 device id USB: serial: option: add Quectel EC200U modem USB: serial: option: add Quectel EM05-G (RS) modem USB: serial: option: add Quectel EM05-G (GR) modem USB: serial: option: add Quectel EM05-G (CS) modem
2023-01-19net: dsa: microchip: ksz9477: port map correction in ALU table entry registerRakesh Sankaranarayanan1-2/+2
ALU table entry 2 register in KSZ9477 have bit positions reserved for forwarding port map. This field is referred in ksz9477_fdb_del() for clearing forward port map and alu table. But current fdb_del refer ALU table entry 3 register for accessing forward port map. Update ksz9477_fdb_del() to get forward port map from correct alu table entry register. With this bug, issue can be observed while deleting static MAC entries. Delete any specific MAC entry using "bridge fdb del" command. This should clear all the specified MAC entries. But it is observed that entries with self static alone are retained. Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across LAN937x and KSZ series. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19driver core: Fix test_async_probe_init saves device in wrong arrayChen Zhongjin1-1/+1
In test_async_probe_init, second set of asynchronous devices are saved in sync_dev[sync_id], which should be async_dev[async_id]. This makes these devices not unregistered when exit. > modprobe test_async_driver_probe && \ > modprobe -r test_async_driver_probe && \ > modprobe test_async_driver_probe ... > sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4' > kobject_add_internal failed for test_async_driver.4 with -EEXIST, don't try to register things with the same name in the same directory. Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221125063541.241328-1-chenzhongjin@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19w1: fix WARNING after calling w1_process()Yang Yingliang1-1/+3
I got the following WARNING message while removing driver(ds2482): ------------[ cut here ]------------ do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire] WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0 CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307 RIP: 0010:__might_sleep+0x98/0xa0 Call Trace: exit_signals+0x6c/0x550 do_exit+0x2b4/0x17e0 kthread_exit+0x52/0x60 kthread+0x16d/0x1e0 ret_from_fork+0x1f/0x30 The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(), set it to TASK_RUNNING when it breaks out of the loop to avoid the warning. Fixes: 3c52e4e62789 ("W1: w1_process, block or sleep") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221205101558.3599162-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19w1: fix deadloop in __w1_remove_master_device()Yang Yingliang2-3/+4
I got a deadloop report while doing device(ds2482) add/remove test: [ 162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1. [ 163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1. [ 164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1. ... __w1_remove_master_device() can't return, because the dev->refcnt is not zero. w1_add_master_device() | w1_alloc_dev() | atomic_set(&dev->refcnt, 2) | kthread_run() | |__w1_remove_master_device() | kthread_stop() // KTHREAD_SHOULD_STOP is set, | // threadfn(w1_process) won't be | // called. | kthread() | | // refcnt will never be 0, it's deadloop. | while (atomic_read(&dev->refcnt)) {...} After calling w1_add_master_device(), w1_process() is not really invoked, before w1_process() starting, if kthread_stop() is called in __w1_remove_master_device(), w1_process() will never be called, the refcnt can not be decreased, then it causes deadloop in remove function because of non-zero refcnt. We need to make sure w1_process() is really started, so move the set refcnt into w1_process() to fix this problem. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221205080434.3149205-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19comedi: adv_pci1760: Fix PWM instruction handlingIan Abbott1-1/+1
(Actually, this is fixing the "Read the Current Status" command sent to the device's outgoing mailbox, but it is only currently used for the PWM instructions.) The PCI-1760 is operated mostly by sending commands to a set of Outgoing Mailbox registers, waiting for the command to complete, and reading the result from the Incoming Mailbox registers. One of these commands is the "Read the Current Status" command. The number of this command is 0x07 (see the User's Manual for the PCI-1760 at <https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>. The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand to this command number 0x07, but unfortunately it currently expands to 0x03. (Command number 0x03 is not defined in the User's Manual.) Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it. This is used by all the PWM subdevice related instructions handled by `pci1760_pwm_insn_config()` which are probably all broken. The effect of sending the undefined command number 0x03 is not known. Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20230103143754.17564-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: serial: qcom_geni: avoid duplicate struct member initArnd Bergmann1-6/+8
When -Woverride-init is enabled in a build, gcc points out that qcom_geni_serial_pm_ops contains conflicting initializers: drivers/tty/serial/qcom_geni_serial.c:1586:20: error: initialized field overwritten [-Werror=override-init] 1586 | .restore = qcom_geni_serial_sys_hib_resume, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/tty/serial/qcom_geni_serial.c:1586:20: note: (near initialization for 'qcom_geni_serial_pm_ops.restore') drivers/tty/serial/qcom_geni_serial.c:1587:17: error: initialized field overwritten [-Werror=override-init] 1587 | .thaw = qcom_geni_serial_sys_hib_resume, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Open-code the initializers with the version that was already used, and use the pm_sleep_ptr() method to deal with unused ones, in place of the __maybe_unused annotation. Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20221215165453.1864836-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19serial: atmel: fix incorrect baudrate setupTobias Schramm1-7/+1
Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup") changed uart_set_options to select the correct baudrate configuration based on the absolute error between requested baudrate and available standard baudrate settings. Prior to that commit the baudrate was selected based on which predefined standard baudrate did not exceed the requested baudrate. This change of selection logic was never reflected in the atmel serial driver. Thus the comment left in the atmel serial driver is no longer accurate. Additionally the manual rounding up described in that comment and applied via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses tty_termios_encode_baud_rate to determine the appropriate baudrate flags this can cause baudrate selection to fail entirely because tty_termios_encode_baud_rate will only select a baudrate if relative error between requested and selected baudrate does not exceed +/-2%. Fix that by requesting actual, exact baudrate used by the serial. Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup") Cc: stable <stable@kernel.org> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: fix possible null-ptr-defer in spk_ttyio_releaseGaosheng Cui1-0/+3
Run the following tests on the qemu platform: syzkaller:~# modprobe speakup_audptr input: Speakup as /devices/virtual/input/input4 initialized device: /dev/synth, node (MAJOR 10, MINOR 125) speakup 3.1.6: initialized synth name on entry is: (null) synth probe spk_ttyio_initialise_ldisc failed because tty_kopen_exclusive returned failed (errno -16), then remove the module, we will get a null-ptr-defer problem, as follow: syzkaller:~# modprobe -r speakup_audptr releasing synth audptr BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 2 PID: 204 Comm: modprobe Not tainted 6.1.0-rc6-dirty #1 RIP: 0010:mutex_lock+0x14/0x30 Call Trace: <TASK> spk_ttyio_release+0x19/0x70 [speakup] synth_release.part.6+0xac/0xc0 [speakup] synth_remove+0x56/0x60 [speakup] __x64_sys_delete_module+0x156/0x250 ? fpregs_assert_state_consistent+0x1d/0x50 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Modules linked in: speakup_audptr(-) speakup Dumping ftrace buffer: in_synth->dev was not initialized during modprobe, so we add check for in_synth->dev to fix this bug. Fixes: 4f2a81f3a882 ("speakup: Reference synth from tty and tty from synth") Cc: stable <stable@kernel.org> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221202060633.217364-1-cuigaosheng1@huawei.com Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19Merge tag 'mlx5-fixes-2023-01-18' of ↵Paolo Abeni12-40/+27
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net: mlx5: eliminate anonymous module_init & module_exit net/mlx5: E-switch, Fix switchdev mode after devlink reload net/mlx5e: Protect global IPsec ASO net/mlx5e: Remove optimization which prevented update of ESN state net/mlx5e: Set decap action based on attr for sample net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk net/mlx5e: Avoid false lock dependency warning on tc_ht even more net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work() ==================== Link: https://lore.kernel.org/r/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-19Merge branch 'rework/console-list-lock' into for-linusPetr Mladek2-15/+10
2023-01-19serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handlerMarek Vasut1-27/+4
Requesting an interrupt with IRQF_ONESHOT will run the primary handler in the hard-IRQ context even in the force-threaded mode. The force-threaded mode is used by PREEMPT_RT in order to avoid acquiring sleeping locks (spinlock_t) in hard-IRQ context. This combination makes it impossible and leads to "sleeping while atomic" warnings. Use one interrupt handler for both handlers (primary and secondary) and drop the IRQF_ONESHOT flag which is not needed. Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3 Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230112180417.25595-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19serial: amba-pl011: fix high priority character transmission in rs486 modeLino Sanfilippo1-4/+4
In RS485 mode the transmission of a high priority character fails since it is written to the data register before the transmitter is enabled. Fix this in pl011_tx_chars() by enabling RS485 transmission before writing the character. Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20230108181735.10937-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19serial: pch_uart: Pass correct sg to dma_unmap_sg()Ilpo Järvinen1-1/+1
A local variable sg is used to store scatterlist pointer in pch_dma_tx_complete(). The for loop doing Tx byte accounting before dma_unmap_sg() alters sg in its increment statement. Therefore, the pointer passed into dma_unmap_sg() won't match to the one given to dma_map_sg(). To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg() instead of the local variable. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO bufferKrzysztof Kozlowski1-2/+16
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. Fixes: f9d690b6ece7 ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221221164022.1087814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()Yang Yingliang1-6/+12
The 'parent' returned by fwnode_graph_get_port_parent() with refcount incremented when 'prev' is not NULL, it needs be put when finish using it. Because the parent is const, introduce a new variable to store the returned fwnode, then put it before returning from fwnode_graph_get_next_endpoint(). Fixes: b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-and-tested-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20221123022542.2999510-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19ptdma: pt_core_execute_cmd() should use spinlockEric Pilmore2-4/+5
The interrupt handler (pt_core_irq_handler()) of the ptdma driver can be called from interrupt context. The code flow in this function can lead down to pt_core_execute_cmd() which will attempt to grab a mutex, which is not appropriate in interrupt context and ultimately leads to a kernel panic. The fix here changes this mutex to a spinlock, which has been verified to resolve the issue. Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-19usb: dwc3: fix extcon dependencyArnd Bergmann1-1/+1
The dwc3 core support now links against the extcon subsystem, so it cannot be built-in when extcon is a loadable module: arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon': core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle' arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev' arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node' There was already a Kconfig dependency in the dual-role support, but this is now needed for the entire dwc3 driver. It is still possible to build dwc3 without extcon, but this prevents it from being set to built-in when extcon is a loadable module. Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230118090147.2126563-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19drm/i915: Fix a memory leak with reused mmap_offsetNirmoy Das1-1/+1
drm_vma_node_allow() and drm_vma_node_revoke() should be called in balanced pairs. We call drm_vma_node_allow() once per-file everytime a user calls mmap_offset, but only call drm_vma_node_revoke once per-file on each mmap_offset. As the mmap_offset is reused by the client, the per-file vm_count may remain non-zero and the rbtree leaked. Call drm_vma_node_allow_once() instead to prevent that memory leak. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Fixes: 786555987207 ("drm/i915/gem: Store mmap_offsets in an rbtree rather than a plain list") Reported-by: Chuansheng Liu <chuansheng.liu@intel.com> Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20230117175236.22317-2-nirmoy.das@intel.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-19drm/drm_vma_manager: Add drm_vma_node_allow_once()Nirmoy Das1-22/+54
Currently there is no easy way for a drm driver to safely check and allow drm_vma_offset_node for a drm file just once. Allow drm drivers to call non-refcounted version of drm_vma_node_allow() so that a driver doesn't need to keep track of each drm_vma_node_allow() to call subsequent drm_vma_node_revoke() to prevent memory leak. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Suggested-by: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20230117175236.22317-1-nirmoy.das@intel.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-19octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rtKevin Hao2-9/+4
The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") uses the get/put_cpu() to protect the usage of percpu pointer in ->aura_freeptr() callback, but it also unnecessarily disable the preemption for the blockable memory allocation. The commit 87b93b678e95 ("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to fix these sleep inside atomic warnings. But it only fix the one for the non-rt kernel. For the rt kernel, we still get the similar warnings like below. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by swapper/0/1: #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4 #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac Preemption disabled at: [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284 CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1 Hardware name: Marvell OcteonTX CN96XX board (DT) Call trace: dump_backtrace.part.0+0xe8/0xf4 show_stack+0x20/0x30 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x224 rt_spin_lock+0x64/0x110 alloc_iova_fast+0x1ac/0x2ac iommu_dma_alloc_iova+0xd4/0x110 __iommu_dma_map+0x80/0x144 iommu_dma_map_page+0xe8/0x260 dma_map_page_attrs+0xb4/0xc0 __otx2_alloc_rbuf+0x90/0x150 otx2_rq_aura_pool_init+0x1c8/0x284 otx2_init_hw_resources+0xe4/0x3a4 otx2_open+0xf0/0x610 __dev_open+0x104/0x224 __dev_change_flags+0x1e4/0x274 dev_change_flags+0x2c/0x7c ic_open_devs+0x124/0x2f8 ip_auto_config+0x180/0x42c do_one_initcall+0x90/0x4dc do_basic_setup+0x10c/0x14c kernel_init_freeable+0x10c/0x13c kernel_init+0x2c/0x140 ret_from_fork+0x10/0x20 Of course, we can shuffle the get/put_cpu() to only wrap the invocation of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only two ->aura_freeptr() callbacks, otx2_aura_freeptr() and cn10k_aura_freeptr(). There is no usage of perpcu variable in the otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it. We can move the get/put_cpu() into the corresponding callback which really has the percpu variable usage and avoid the sprinkling of get/put_cpu() in several places. Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-24 18:51:29 +0000