summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2007-12-07leds: Fix led trigger locking bugsRichard Purdie2-27/+28
Convert part of the led trigger core from rw spinlocks to rw semaphores. We're calling functions which can sleep from invalid contexts otherwise. Fixes bug #9264. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-06Merge branch 'release' of ↵Linus Torvalds2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: suspend: old debugging hacks sneaked back Freezer: Fix JFFS2 garbage collector freezing issue (rev. 2) HWMON: coretemp, suspend fix Freezer: Fix APM emulation breakage Freezer: Fix s2disk resume from initrd
2007-12-06Pull apm-freeze-fix into release branchLen Brown1-7/+8
2007-12-06Pull suspend-2.6.24 into release branchLen Brown1-3/+2
2007-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds1-3/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] lba_pci: pci_claim_resources disabled expansion roms [PARISC] print more than one character at a time for pdc console [PARISC] Update parisc-linux MAINTAINERS entries [PARISC] timer interrupt should not be IRQ_DISABLED Revert "[PARISC] import necessary bits of libgcc.a"
2007-12-06[PARISC] lba_pci: pci_claim_resources disabled expansion romsKyle McMartin1-3/+7
radeonfb was HPMC-ing my C8000 by trying to map its expansion rom from IO_VIEW, instead of PA_VIEW. Fix seems to be to ensure that its disabled ROM is properly inserted into the resource tree. FIXME: this will result in a whinging printk for cards which share expansion ROMS, such as a quad tulip. Thankfully, it isn't harmful. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [LRO]: fix lro_gen_skb() alignment [TCP]: NAGLE_PUSH seems to be a wrong way around [TCP]: Move prior_in_flight collect to more robust place [TCP] FRTO: Use of existing funcs make code more obvious & robust [IRDA]: Move ircomm_tty_line_info() under #ifdef CONFIG_PROC_FS [ROSE]: Trivial compilation CONFIG_INET=n case [IPVS]: Fix sched registration race when checking for name collision. [IPVS]: Don't leak sysctl tables if the scheduler registration fails.
2007-12-05gpio_cs5535: disable AUX on outputBen Gardner1-0/+5
The AMD CS5535/CS5536 GPIO has two alternate output modes: AUX-1 and AUX-2. When either AUX is enabled, the cs5535_gpio driver cannot control the output. Some BIOS code for the Geode processor enables AUX-1 for GPIO-1, which configures it as the PC BEEP output. This patch will disable AUX-1 and AUX-2 when the user enables output. Signed-of-by: Ben Gardner <gardner.ben@gmail.com> Cc: Richard Knutsson <ricknu-0@student.ltu.se> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05Blackfin SPI driver: reconfigure speed_hz and bits_per_word in each spi transferBryan Wu1-7/+45
- reconfigure SPI baud from speed_hz of each spi transfer - according to spi_transfer.bits_per_word to reprogram register and setup correct SPI operation handlers Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05Blackfin SPI driver: move hard coded pin_req to board fileBryan Wu1-21/+7
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time - move this static things to the blackfin board file - add pin_req array to struct bfin5xx_spi_master - tested on BF537/BF548 with SPI flash Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05Blackfin SPI driver: use void __iomem * for regs_baseBryan Wu1-5/+4
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05Blackfin SPI driver: use cpu_relax() to replace continue in while busywaitBryan Wu1-39/+39
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin: resequence DMA start/stopSonic Zhang1-11/+19
Set correct baud for spi mmc and enable SPI only after DMA is started. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin: update handling of delay-after-deselectBryan Wu1-15/+9
Move cs_chg_udelay handling (specific to this driver) to cs_deactive(), fixing a bug when some SPI LCD driver needs delay after cs_deactive. Fix bug reported by Cameron Barfield <cbarfield@cyberdata.net> https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&_forum_action=ForumMessageBrowse&thread_id=23630&feedback=Message%20replied. Cc: Cameron Barfield <cbarfield@cyberdata.net> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin: bugfix for 8..16 bit word sizesBryan Wu1-1/+1
Fix bug in u16_cs_chg_reader to read data_len-2 bytes data firstly, then read out the last 2 bytes data Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin: handle multiple spi_mastersBryan Wu1-182/+189
Move global SPI regs_base and dma_ch to struct driver_data. Test on BF54x SPI Flash with 2 spi_master devices enabled. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin: relocate spin/waitsSonic Zhang1-32/+52
Move spin/waits to more correct locations in bfin SPI driver. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin: change handling of communication parametersSonic Zhang1-75/+87
Fix SPI driver to work with SPI flash ST M25P16 on bf548 Currently the SPI driver enables the SPI controller and sets the SPI baud register for each SPI transfer. But they should never be changed within a SPI message session, in which several SPI transfers are pumped. This patch moves SPI setting to the begining of a message session, and never disables SPI controller until an error occurs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin, rearrange portmux callsSonic Zhang1-25/+28
Move pin muxing to setup and cleanup methods. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin uses portmux for additional bussesSonic Zhang1-20/+31
Use portmux mechanism to support SPI busses 1 and 2, instead of just the original bus 0. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin uses platform device resourcesBryan Wu1-41/+83
Update spi driver to support multi-ports by using platform resources; tested on STAMP537+SPI_MMC, other boards need more testing. Plus other minor updates. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin, don't bypass spi frameworkMike Frysinger1-0/+12
Prevent people from setting bits in ctl_reg that the SPI framework already handles, hopefully we can one day drop ctl_reg completely Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin handles spi_transfer.cs_changeBryan Wu1-22/+54
Respect per-transfer cs_change field (protocol tweaking support) by adding and using cs_active/cs_deactive functions. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: spi_bfin cleanups, error handlingBryan Wu1-64/+47
Cleanup and error handling - add error handling in SPI bus driver with selecting clients - use proper defines to access Blackfin MMRs - remove useless SSYNCs - cleaner use of portmux calls Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: bfin spi uses portmux callsMichael Hennerich1-6/+22
Use new Blackfin portmux interface, add error handling. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: initial BF54x SPI supportBryan Wu1-70/+69
Initial BF54x SPI support - support BF54x SPI0 - clean up some code (whitespace etc) - will support multiports in the future - start using portmux calls Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: use simplified spi_sync() calling conventionMarc Pignat3-26/+9
Given the patch which simplifies the spi_sync calling convention, this one updates the callers of that routine which tried using it according to the previous specification. (Most didn't.) Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: simplify spi_sync() calling conventionMarc Pignat1-8/+5
Simplify spi_sync calling convention, eliminating the need to check both the return value AND the message->status. In consequence, this corrects misbehaviours of spi_read and spi_write (which only checked the former) and their callers. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05spi: at25 driver is for EEPROM not FLASHDavid Brownell1-0/+7
Add comment to at25 driver that it's for EEPROM chips, not FLASH chips ... the AT25 series has both types of chip, and sometimes they're even pin-compatible. The command sets are different, as is the treatment of erasure. (FLASH needs explicit erasure, but with EEPROM it's implicit.) Note that all vendors seem to have this same confusion in their *25* series SPI memory parts. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05SPI: use mutex not semaphoreDavid Brownell1-3/+3
Make spi_write_then_read() use a mutex not a binary semaphore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05RTC: assure proper memory ordering with respect to RTC_DEV_BUSY flagJiri Kosina2-5/+5
We must make sure that the RTC_DEV_BUSY flag has proper lock semantics, i.e. that the RTC_DEV_BUSY stores clearing the flag don't get reordered before the preceeding stores and loads and vice versa. Spotted by Nick Piggin. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05[LRO]: fix lro_gen_skb() alignmentAndrew Gallatin1-0/+1
Add a field to the lro_mgr struct so that drivers can specify how much padding is required to align layer 3 headers when a packet is copied into a freshly allocated skb by inet_lro.c:lro_gen_skb(). Without padding, skbs generated by LRO will cause alignment warnings on architectures which require strict alignment (seen on sparc64). Myri10GE is updated to use this field. Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-04Merge branch 'upstream-fixes' of ↵Linus Torvalds11-14/+25
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: PHY: Add the phy_device_release device method. gianfar: fix compile warning pasemi_mac: Fix reuse of free'd skb SMC911X: Fix using of dereferenced skb after netif_rx sky2: recovery deadlock fix Fix memory corruption in fec_mpc52xx Don't claim to do IPv6 checksum offload cxgb - revert file mode changes.
2007-12-04PHY: Add the phy_device_release device method.Anton Vorontsov2-4/+17
Lately I've got this nice badness on mdio bus removal: Device 'e0103120:06' does not have a release() function, it is broken and must be fixed. ------------[ cut here ]------------ Badness at drivers/base/core.c:107 NIP: c015c1a8 LR: c015c1a8 CTR: c0157488 REGS: c34bdcf0 TRAP: 0700 Not tainted (2.6.23-rc5-g9ebadfbb-dirty) MSR: 00029032 <EE,ME,IR,DR> CR: 24088422 XER: 00000000 ... [c34bdda0] [c015c1a8] device_release+0x78/0x80 (unreliable) [c34bddb0] [c01354cc] kobject_cleanup+0x80/0xbc [c34bddd0] [c01365f0] kref_put+0x54/0x6c [c34bdde0] [c013543c] kobject_put+0x24/0x34 [c34bddf0] [c015c384] put_device+0x1c/0x2c [c34bde00] [c0180e84] mdiobus_unregister+0x2c/0x58 ... Though actually there is nothing broken, it just device subsystem core expects another "pattern" of resource managment. This patch implement phy device's release function, thus we're getting rid of this badness. Also small hidden bug fixed, hope none other introduced. ;-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04gianfar: fix compile warningGrant Likely1-1/+1
Eliminate an uninitialized variable warning. The code is correct, but a pointer to the automatic variable 'addr' is passed to dma_alloc_coherent. Since addr has never been initialized, and the compiler doesn't know what dma_alloc_coherent will do with it, it complains. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04pasemi_mac: Fix reuse of free'd skbOlof Johansson1-1/+1
Turns out we're freeing the skb when we detect CRC error, but we're not clearing out info->skb. We could either clear it and have the stack reallocate it, or just leave it and the rx ring refill code will reuse the one that was allocated. Reusing a freed skb obviously caused some nasty crashes of various kind, as reported by Brent Baude and David Woodhouse. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04SMC911X: Fix using of dereferenced skb after netif_rxWang Chen1-1/+1
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04sky2: recovery deadlock fixStephen Hemminger1-4/+2
Prevent deadlock in sky2 recovery logic. sky2_down calls napi_synchronize which gets stuck if napi was already disabled. Fix by rearranging slightly and not calling napi_disable until after both ports are stopped. The napi_disable probably is being overly paranoid, but it is safe now. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04Fix memory corruption in fec_mpc52xxJon Smirl1-2/+2
The mpc5200 fec driver is corrupting memory. This patch fixes two bugs where the wrong skb was being referenced. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04Don't claim to do IPv6 checksum offloadDavid Woodhouse1-1/+1
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04cxgb - revert file mode changes.Divy Le Ray4-0/+0
revert inavertant file mode changes Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timingsBartlomiej Zolnierkiewicz2-4/+5
* Don't program UDMA timings when programming PIO or MWDMA modes. This has also a nice side-effect of fixing regression added by commit 681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of SRST reset sequences") (->set_piomode method for PIO0 is called before ->cable_detect method which checks UDMA timings to get the cable type). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-by: "Thomas Lindroth" <thomas.lindroth@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04ahci: add the Device IDs of MCP79 AHCI controller to ahci.cpeerchen1-0/+4
Add the device IDs of legacy mode of MCP79 AHCI controller to ahci.c Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04sata_mv: Warn about HPT RocketRAID BIOS treatment of "Legacy" drivesMark Lord1-0/+9
The Highpoint RocketRAID boards using Marvell 7042 chips overwrite the 9th sector of attached drives at boot time, when those drives are configured as "Legacy" (the default) in the HighPoint BIOS. This kills GRUB, and probably other stuff. But it all happens *before* Linux is even loaded. So, for now we'll log a WARNING when such boards are detected, and advise users to configure BIOS "JBOD" volumes instead, which don't appear to suffer from this problem. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-12-04sata_nv: don't use legacy DMA in ADMA mode (v3)Robert Hancock1-9/+23
We need to run any DMA command with result taskfile requested in ADMA mode when the port is in ADMA mode, otherwise it may try to use the legacy DMA engine in ADMA mode which is not allowed. Enforce this with BUG_ON() since data corruption could potentially result if this happened. Also, fail any attempt to try and issue NCQ commands with result taskfile requested, since the hardware doesn't allow this. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds3-11/+31
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Make sure the restore psw masks are initialized. [S390] Fix compile error on 31bit without preemption [S390] dcssblk: prevent early access without own make_request function [S390] cio: add missing reprobe loop end statement [S390] cio: Issue SenseID per path.
2007-12-04drivers/s390/net/ctcmain.c: fix build bugIngo Molnar1-1/+0
SET_MODULE_OWNER() is obsolete. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-04[S390] dcssblk: prevent early access without own make_request functionChristian Borntraeger1-2/+2
When loading a dcss segment with the dcssblk driver, sometimes the following kind of message appears: bio too big device dcssblk0 (8 > 0) Buffer I/O error on device dcssblk0, logical block 172016 .. The fix is to move the disk registration after setting the make_request function, to avoid calls into generic_make_request for dcssblock without having the make_request function set up properly. Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-12-04[S390] cio: add missing reprobe loop end statementPeter Oberparleiter1-0/+1
Add loop end statement to prevent looping over empty subchannel sets. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-12-04[S390] cio: Issue SenseID per path.Cornelia Huck1-9/+28
We may receive a unit check for every path when we issue a SenseID. Unfortunately, the channel subsystem will try on a different path every time if we use a lpm of 0xff, which will exhaust our retry counter. Therefore, revert SenseID to its previous per-path behaviour and just leave out the suspend multipath reconnect. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 18:11:26 +0000