summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-04-06mvneta: dont call mvneta_adjust_link() manuallyStas Sergeev1-6/+1
mvneta_adjust_link() is a callback for of_phy_connect() and should not be called directly. The result of calling it directly is as below: Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02xen-netfront: transmit fully GSO-sized packetsJonathan Davies1-4/+1
xen-netfront limits transmitted skbs to be at most 44 segments in size. However, GSO permits up to 65536 bytes, which means a maximum of 45 segments of 1448 bytes each. This slight reduction in the size of packets means a slight loss in efficiency. Since c/s 9ecd1a75d, xen-netfront sets gso_max_size to XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER, where XEN_NETIF_MAX_TX_SIZE is 65535 bytes. The calculation used by tcp_tso_autosize (and also tcp_xmit_size_goal since c/s 6c09fa09d) in determining when to split an skb into two is sk->sk_gso_max_size - 1 - MAX_TCP_HEADER. So the maximum permitted size of an skb is calculated to be (XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER) - 1 - MAX_TCP_HEADER. Intuitively, this looks like the wrong formula -- we don't need two TCP headers. Instead, there is no need to deviate from the default gso_max_size of 65536 as this already accommodates the size of the header. Currently, the largest skb transmitted by netfront is 63712 bytes (44 segments of 1448 bytes each), as observed via tcpdump. This patch makes netfront send skbs of up to 65160 bytes (45 segments of 1448 bytes each). Similarly, the maximum allowable mtu does not need to subtract MAX_TCP_HEADER as it relates to the size of the whole packet, including the header. Fixes: 9ecd1a75d977 ("xen-netfront: reduce gso_max_size to account for max TCP header") Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds5-1/+19
Pull dmaengine fixes from Vinod Koul: "This time we have addition of caps for jz4740 which fixes intentional warning at boot. Then we have memory leak issues in drivers using virt-dma by Peter on few drive" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: moxart-dma: Fix memory leak when stopping a running transfer dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer dmaengine: omap-dma: Fix memory leak when terminating running transfer dmaengine: edma: fix memory leak when terminating running transfers dmaengine: jz4740: Define capabilities
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds50-349/+674
Pull networking fixes from David Miller: 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from Johannes Berg. 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry Finger. 3) Need to use for_each_netdev_safe() in rtnl_group_changelink() otherwise we can crash, from WANG Cong. 4) mlx4 driver does register_netdev() too early in the probe sequence, from Ido Shamay. 5) Don't allow router discovery hop limit to decrease the interface's hop limit, from D.S. Ljungmark. 6) tx_packets and tx_bytes improperly accounted for certain classes of USB network devices, fix from Ben Hutchings. 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr tables in the error path, they must instead use ip{6}mr_free_table(). Fix from WANG Cong. 8) cxgb4 doesn't properly quiesce all RX activity before unregistering the netdevice. Fix from Hariprasad Shenai. 9) Fix hash corruptions in ipvlan driver, from Jiri Benc. 10) nla_memcpy(), like a real memcpy, should fully initialize the destination buffer, even if the source attribute is smaller. Fix from Jiri Benc. 11) Fix wrong error code returned from iucv_sock_sendmsg(). We should use whatever sock_alloc_send_skb() put into 'err'. From Eugene Crosser. 12) Fix slab object leak on module unload in TIPC, from Ying Xue. 13) Need a READ_ONCE() when reading the cached RX socket route in tcp_v{4,6}_early_demux(). From Michal Kubecek. 14) Still too many problems with TPC support in the ath9k driver, so disable it for now. From Felix Fietkau. 15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from Larry Finger. 16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cxgb4: Fix to dump devlog, even if FW is crashed cxgb4: Firmware macro changes for fw verison 1.13.32.0 bnx2x: Fix kdump when iommu=on bnx2x: Fix kdump on 4-port device mac80211: fix RX A-MPDU session reorder timer deletion MAINTAINERS: Update Intel Wired Ethernet Driver info tipc: fix a slab object leak net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet af_iucv: fix AF_IUCV sendmsg() errno openvswitch: Return vport module ref before destruction netlink: pad nla_memcpy dest buffer with zeroes bonding: Bonding Overriding Configuration logic restored. ipvlan: fix check for IP addresses in control path ipvlan: do not use rcu operations for address list ipvlan: protect against concurrent link removal ipvlan: fix addr hash list corruption net: fec: setup right value for mdio hold time net: tcp6: fix double call of tcp_v6_fill_cb() cxgb4vf: Fix sparse warnings netns: don't clear nsid too early on removal ...
2015-04-01Merge tag 'wireless-drivers-for-davem-2015-04-01' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix a memory leak, we leaked memory each time the module was loaded. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01cxgb4: Fix to dump devlog, even if FW is crashedHariprasad Shenai4-26/+65
Add new Common Code routines to retrieve Firmware Device Log parameters from PCIE_FW_PF[7]. The firmware initializes its Device Log very early on and stores the parameters for its location/size in that register. Using the parameters from the register allows us to access the Firmware Device Log even when the firmware crashes very early on or we're not attached to the firmware Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01cxgb4: Firmware macro changes for fw verison 1.13.32.0Hariprasad Shenai2-6/+41
Adds new macro and few macro changes for fw version 1.13.32.0 also changes version string in driver to match 1.13.32.0 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01Merge tag 'iommu-fixes-v4.0-rc6' of ↵Linus Torvalds3-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "This contains fixes for: - a VT-d issue where hardware domain-ids might be freed while still in use. - an ipmmu-vmsa issue where where the device-table was not zero terminated - unchecked register access issue in the arm-smmu driver" * tag 'iommu-fixes-v4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Remove unused variable iommu: ipmmu-vmsa: Add terminating entry for ipmmu_of_ids iommu/vt-d: Detach domain *only* from attached iommus iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS condition
2015-04-01lguest: now needs PCI_DIRECT.Rusty Russell1-1/+1
Since commit 8e7094694396 ("lguest: add a dummy PCI host bridge.") lguest uses PCI, but it needs you to frob the ports directly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-01bnx2x: Fix kdump when iommu=onYuval Mintz1-23/+16
When IOMM-vtd is active, once main kernel crashes unfinished DMAE transactions will be blocked, putting the HW in an error state which will cause further transactions to timeout. Current employed logic uses wrong macros, causing the first function to be the only function that cleanups that error state during its probe/load. This patch allows all the functions to successfully re-load in kdump kernel. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01bnx2x: Fix kdump on 4-port deviceYuval Mintz1-18/+35
When running in a kdump kernel, it's very likely that due to sync. loss with management firmware the first PCI function to probe and reach the previous unload flow would decide it can reset the chip and continue onward. While doing so, it will only close its own Rx port. On a 4-port device where 2nd port on engine is a 1g-port, the 2nd port would allow ingress traffic after the chip is reset [assuming it was active on the first kernel]. This would later cause a HW attention. This changes driver flow to close both ports' 1g capabilities during the previous driver unload flow prior to the chip reset. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/usb/r8152: add device id for Lenovo TP USB 3.0 EthernetChristian Hesse2-0/+10
This device is sold as 'Lenovo Tinkpad USB 3.0 Ethernet 4X90E51405'. Chipset is RTL8153 and works with r8152. Signed-off-by: Christian Hesse <mail@eworm.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31bonding: Bonding Overriding Configuration logic restored.Anton Nayshtut1-1/+2
Before commit 3900f29021f0bc7fe9815aa32f1a993b7dfdd402 ("bonding: slight optimizztion for bond_slave_override()") the override logic was to send packets with non-zero queue_id through the slave with corresponding queue_id, under two conditions only - if the slave can transmit and it's up. The above mentioned commit changed this logic by introducing an additional condition - whether the bond is active (indirectly, using the slave_can_tx and later - bond_is_active_slave), that prevents the user from implementing more complex policies according to the Documentation/networking/bonding.txt. Signed-off-by: Anton Nayshtut <anton@swortex.com> Signed-off-by: Alexey Bogoslavsky <alexey@swortex.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: fix check for IP addresses in control pathJiri Benc3-10/+21
When an ipvlan interface is down, its addresses are not on the hash list. Fix checks for existence of addresses not to depend on the hash list, walk through all interface addresses instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: do not use rcu operations for address listJiri Benc1-5/+5
All accesses to ipvlan->addrs are under rtnl. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: protect against concurrent link removalJiri Benc1-1/+3
Adding and removing to the 'ipvlans' list is already done using _rcu list operations. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: fix addr hash list corruptionJiri Benc2-4/+13
When ipvlan interface with IP addresses attached is brought down and then deleted, the assigned addresses are deleted twice from the address hash list, first on the interface down and second on the link deletion. Similarly, when an address is added while the interface is down, it is added second time once the interface is brought up. When the interface is down, the addresses should be kept off the hash list for performance reasons. Ensure this is true, which also fixes the double add problem. To fix the double free, check whether the address is hashed before removing it. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-30Merge branch 'for-4.0-fixes' of ↵Linus Torvalds1-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Nothing exciting. Two patches to update queued trim blacklist" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Blacklist queued TRIM on Samsung SSD 850 Pro libata: Update Crucial/Micron blacklist
2015-03-30dmaengine: moxart-dma: Fix memory leak when stopping a running transferPeter Ujfalusi1-1/+3
The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: bcm2835-dma: Fix memory leak when stopping a running transferPeter Ujfalusi1-0/+1
The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: omap-dma: Fix memory leak when terminating running transferPeter Ujfalusi1-0/+1
In omap_dma_start_desc the vdesc->node is removed from the virt-dma framework managed lists (to be precise from the desc_issued list). If a terminate_all comes before the transfer finishes the omap_desc will not be freed up because it is not in any of the lists and we stopped the DMA channel so the transfer will not going to complete. There is no special sequence for leaking memory when using cyclic (audio) transfer: with every start and stop of a cyclic transfer the driver leaks struct omap_desc worth of memory. Free up the allocated memory directly in omap_dma_terminate_all() since the framework will not going to do that for us. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> CC: <linux-omap@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: edma: fix memory leak when terminating running transfersPetr Kulhavy1-0/+7
If edma_terminate_all() was called while a transfer was running (i.e. after edma_execute() but before edma_callback()) the echan->edesc was not freed. This was due to the fact that a running transfer is on none of the vchan lists: desc_submitted, desc_issued, desc_completed (edma_execute() removes it from the desc_issued list), so the vchan_dma_desc_free_list() called at the end of edma_terminate_all() didn't find it and didn't free it. This bug was found on an AM1808 based hardware (very similar to da850evm, however using the second MMC/SD controller), where intense operations on the SD card wasted the device 128MB RAM within a couple of days. Peter Ujfalusi: The issue is even more severe since it affects cyclic (audio) transfers as well. In this case starting/stopping audio will results memory leak. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> CC: <linux-omap@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: jz4740: Define capabilitiesLars-Peter Clausen1-0/+7
Setup the capabilities of the device/driver, so that users of the DMAengine API can query them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30Merge tag 'gpio-v4.0-3' of ↵Linus Torvalds3-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull late GPIO fixes from Linus Walleij: "Here are the (hopefully) last GPIO fixes for v4.0. Nothing controversial whatsoever, just fixes: - syscon GPIO fix for Keystone DSP GPIOs - pin number translation fix for ACPI GPIO - a smallish compiler warning fix on the mpc8xxx driver" * tag 'gpio-v4.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: syscon: reduce message level when direction reg offset not in dt gpiolib: translate pin number in GPIO ACPI callbacks gpio: mpc8xxx: remove __initdata annotation for mpc8xxx_gpio_ids[]
2015-03-30Merge tag 'iwlwifi-for-kalle-2015-03-30' of ↵Kalle Valo1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix a memory leak: we leaked memory each time the module was loaded.
2015-03-29net: fec: setup right value for mdio hold timeUwe Kleine-König1-3/+27
The FEC modules used on i.MX28 and newer have a register to tune the MDIO output hold time that should be at least 10 ns. Up to now this value was not explicitly set and so resulted in less hold time if the fec clock was faster than 100 MHz. This was noticed on an i.MX28 machine that uses an input clock of ~150 Mhz which resulted in unreliable communication with a Marvell switch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4vf: Fix sparse warningsHariprasad Shenai2-7/+11
Fixes sparse warnings introduced in commit e85c9a7abfa407ed ("cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue Registers") and df64e4d38c904dd3 ("cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addresses") and few old ones sparse warnings: >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: cast removes >> address space of expression >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: incorrect type in >> initializer (different address space) >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1020:40: sparse: incorrect type in >> argument 1 (different base types) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Disable interrupts and napi before unregistering netdevHariprasad Shenai1-7/+18
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <shameem@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Allocate dynamic mem. for egress and ingress queue mapsHariprasad Shenai3-15/+83
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings4-9/+18
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no>
2015-03-29usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings4-3/+8
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
2015-03-27libata: Blacklist queued TRIM on Samsung SSD 850 ProMartin K. Petersen1-0/+2
Blacklist queued TRIM on this drive for now. Reported-by: Stefan Keller <linux-list@zahlenfresser.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> CC: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: Update Crucial/Micron blacklistMartin K. Petersen1-2/+11
Micron has released an updated firmware (MU02) for M510/M550/MX100 drives to fix the issues with queued TRIM. Queued TRIM remains broken on M500 but is working fine on later drives such as M600 and MX200. Tweak our blacklist to reflect the above. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71371 Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27gpio: syscon: reduce message level when direction reg offset not in dtGrygorii Strashko1-1/+1
Now GPIO syscon driver produces bunch of warnings during the boot of Kesytone 2 SoCs: gpio-syscon soc:keystone_dsp_gpio@02620240: can't read the dir register offset! gpio-syscon soc:keystone_dsp_gpio@2620244: can't read the dir register offset! This message unintentionally was added using dev_err(), but its actual log level is debug, because third cell of "ti,syscon-dev" is optional. Hence change it to dev_dbg() as it should be. This patch fixes commit: 5a3e3f8 ("gpio: syscon: retriave syscon node and regs offsets from dt") Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27watchdog: imgpdc: Fix default heartbeatJames Hogan1-3/+3
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27watchdog: imgpdc: Fix probe NULL pointer dereferenceJames Hogan1-1/+1
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to watchdog_set_drvdata(), causing a NULL pointer dereference when pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using watchdog_get_drvdata() and reads the register base address through it. Fix by moving the watchdog_set_drvdata() call earlier, to where various other pdc_wdt->wdt_dev fields are initialised. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27watchdog: mtk_wdt: signedness bug in mtk_wdt_start()Dan Carpenter1-1/+1
"ret" should be signed for the error handling to work correctly. This doesn't matter much in real life since mtk_wdt_set_timeout() always succeeds. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-34/+35
Pull drm refcounting fixes from Dave Airlie: "Here is the complete set of i915 bug/warn/refcounting fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent drm/i915: Don't try to reference the fb in get_initial_plane_config() drm: Fixup racy refcounting in plane_force_disable
2015-03-26Merge tag 'dm-4.0-fix-2' of ↵Linus Torvalds1-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix DM core device cleanup regression -- due to a latent race that was exposed by the bdi changes that were introduced during the 4.0 merge" * tag 'dm-4.0-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix add_disk() NULL pointer due to race with free_dev()
2015-03-26drm/i915: Fixup legacy plane->crtc link for initial fb configDaniel Vetter1-0/+2
This is a very similar bug in the load detect code fixed in commit 9128b040eb774e04bc23777b005ace2b66ab2a85 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Mar 3 17:31:21 2015 +0100 drm/i915: Fix modeset state confusion in the load detect code But this time around it was the initial fb code that forgot to update the plane->crtc pointer. Otherwise it's the exact same bug, with the exact same restrains (any set_config call/ioctl that doesn't disable the pipe papers over the bug for free, so fairly hard to hit in normal testing). So if you want the full explanation just go read that one over there - it's rather long ... Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-and-tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7ChbtJrknqws1qvZcbrg1CW2pQAFkSMURWWgyASRyGXg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26drm/i915: Fix atomic state when reusing the firmware fbDamien Lespiau1-2/+9
Right now, we get a warning when taking over the firmware fb: [drm:drm_atomic_plane_check] FB set but no CRTC with the following backtrace: [<ffffffffa010339d>] drm_atomic_check_only+0x35d/0x510 [drm] [<ffffffffa0103567>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa00a6ccd>] drm_atomic_helper_plane_set_property+0x8d/0xd0 [drm_kms_helper] [<ffffffffa00f1fed>] drm_mode_plane_set_obj_prop+0x2d/0x90 [drm] [<ffffffffa00a8a1b>] restore_fbdev_mode+0x6b/0xf0 [drm_kms_helper] [<ffffffffa00aa969>] drm_fb_helper_restore_fbdev_mode_unlocked+0x29/0x80 [drm_kms_helper] [<ffffffffa00aa9e2>] drm_fb_helper_set_par+0x22/0x50 [drm_kms_helper] [<ffffffffa050a71a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff813ad444>] fbcon_init+0x4f4/0x580 That's because we update the plane state with the fb from the firmware, but we never associate the plane to that CRTC. We don't quite have the full DRM take over from HW state just yet, so fake enough of the plane atomic state to pass the checks. v2: Fix the state on which we set the CRTC in the case we're sharing the initial fb with another pipe. (Matt) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7yXH=U757w8V=Zj2U1URG4nYNav20NpjtQ4svVueyPNw@mail.gmail.com Reference: http://lkml.kernel.org/r/CA+55aFweWR=nDzc2Y=rCtL_H8JfdprQiCimN5dwc+TgyD4Bjsg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock()Maxime Ripard1-7/+0
The sun5i timer is used as the sched-clock on certain systems, and ever since we started using cpufreq, the cpu clock (that is one of the timer's clock indirect parent) now changes as well, along with the actual sched_clock() rate. This is not accurate and not desirable. We can safely remove the sun5i sched-clock on those systems, since we have other reliable sched_clock() sources in the system. Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ Improved the changelog. ] Cc: richard@nod.at Link: http://lkml.kernel.org/r/1427362029-6511-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-26clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errorsRichard Weinberger1-0/+3
Fix !CONFIG_HAS_IOMEM related build failures in three clocksource drivers. The build failures have the pattern of: drivers/clocksource/sh_cmt.c: In function ‘sh_cmt_map_memory’: drivers/clocksource/sh_cmt.c:920:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration] cmt->mapbase = ioremap_nocache(mem->start, resource_size(mem)); Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: maxime.ripard@free-electrons.com Link: http://lkml.kernel.org/r/1427362029-6511-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-26drm/i915: Keep ring->active_list and ring->requests_list consistentChris Wilson1-17/+21
If we retire requests last, we may use a later seqno and so clear the requests lists without clearing the active list, leading to confusion. Hence we should retire requests first for consistency with the early return. The order used to be important as the lifecycle for the object on the active list was determined by request->seqno. However, the requests themselves are now reference counted removing the constraint from the order of retirement. Fixes regression from commit 1b5a433a4dd967b125131da42b89b5cc0d5b1f57 Author: John Harrison <John.C.Harrison@Intel.com> Date: Mon Nov 24 18:49:42 2014 +0000 drm/i915: Convert 'i915_seqno_passed' calls into 'i915_gem_request_completed ' and a WARNING: CPU: 0 PID: 1383 at drivers/gpu/drm/i915/i915_gem_evict.c:279 i915_gem_evict_vm+0x10c/0x140() WARN_ON(!list_empty(&vm->active_list)) Identified by updating WATCH_LISTS: [drm:i915_verify_lists] *ERROR* blitter ring: active list not empty, but no requests WARNING: CPU: 0 PID: 681 at drivers/gpu/drm/i915/i915_gem.c:2751 i915_gem_retire_requests_ring+0x149/0x230() WARN_ON(i915_verify_lists(ring->dev)) Note that this is only a problem in evict_vm where the following happens after a retire_request has cleaned out all requests, but not all active bo: - intel_ring_idle called from i915_gpu_idle notices that no requests are outstanding and immediately returns. - i915_gem_retire_requests_ring called from i915_gem_retire_requests also immediately returns when there's no request, still leaving the bo on the active list. - evict_vm hits the WARN_ON(!list_empty(&vm->active_list)) after evicting all active objects that there's still stuff left that shouldn't be there. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-8/+9
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: numa: mark huge PTEs young when clearing NUMA hinting faults mm: numa: slow PTE scan rate if migration failures occur mm: numa: preserve PTE write permissions across a NUMA hinting fault mm: numa: group related processes based on VMA flags instead of page table flags hfsplus: fix B-tree corruption after insertion at position 0 MAINTAINERS: add Jan as DMI/SMBIOS support maintainer fs/affs/file.c: unlock/release page on error mm/page_alloc.c: call kernel_map_pages in unset_migrateype_isolate mm/slub: fix lockups on PREEMPT && !SMP kernels mm/memory hotplug: postpone the reset of obsolete pgdat MAINTAINERS: correct rtc armada38x pattern entry mm/pagewalk.c: prevent positive return value of walk_page_test() from being passed to callers mm: fix anon_vma->degree underflow in anon_vma endless growing prevention drivers/rtc/rtc-mrst: fix suspend/resume aoe: update aoe maintainer information
2015-03-25drivers/rtc/rtc-mrst: fix suspend/resumeLars-Peter Clausen1-8/+9
The Moorestown RTC driver implements suspend and resume callbacks and assigns them to the suspend and resume fields of the device_driver struct. These callbacks are never actually called by anything though. Modify the driver to properly use dev_pm_ops so that the suspend and resume functions are actually executed upon suspend/resume. [akpm@linux-foundation.org: device_driver.name is const char *] Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2-4/+5
Pull block layer fixes from Jens Axboe: "A small collection of fixes that has been gathered over the last few weeks. This contains: - A one-liner fix for NVMe, fixing a missing list_head init that could makes us oops on hitting recovery at load time. - Two small blk-mq fixes: - Fixup a bad goto jump on error handling. - Fix for oopsing if running out of reserved tags. - A memory leak fix for NBD. - Two small writeback fixes from Tejun, fixing a missing init to INITIAL_JIFFIES, and a possible underflow introduced recently. - A core merge fixup in sg gap detection, where rq->biotail was indexed with the count of rq->bio" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: fix possible underflow in write bandwidth calculation NVMe: Initialize device list head before starting Fix bug in blk_rq_merge_ok blkmq: Fix NULL pointer deref when all reserved tags in blk-mq: fix use of incorrect goto label in blk_mq_init_queue error path nbd: fix possible memory leak writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()
2015-03-25cxgb4: Fix frame size warning for 32 bit archHariprasad Shenai1-1/+7
Fixes below warning by dynamically allocating memory All warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c: In function 'cctrl_tbl_show': >> drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:689:1: warning: the >> frame >> size of 1028 bytes is larger than 1024 bytes [-Wframe-larger-than=] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24Merge branch 'for-4.0-fixes' of ↵Linus Torvalds3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fix from Tejun Heo: "One patch to fix a regression from the recent switch to blk-mq tag allocation which can cause oops on SAS-attached SATA drives" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: Add a new flag to destinguish sas controller
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-10 10:18:42 +0000