summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21drm/amd/display: increase dcn315 pstate change latencyDmytro Laktyushkin1-8/+14
[Why & How] Update after new measurment came in Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Fix DP MST timeslot issue when fallback happenedCruise Hung1-1/+7
[Why] When USB4 DP link training failed and fell back to lower link rate, the time slot calculation uses the verified_link_cap. And the verified_link_cap was not updated to the new one. It caused the wrong VC payload time-slot was allocated. [How] Updated verified_link_cap with the new one from cur_link_settings after the LT completes successfully. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Display distortion after hotplug 5K tiled displayMeenakshikumar Somasundaram6-20/+45
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Update dummy P-state search to use DCN32 DMLGeorge Shen2-1/+51
[Why] Current DCN3.2 logic for finding the dummy P-state index uses the DCN3.0 DML validation function instead of DCN3.2 DML. This can result in either unexpected DML VBA values, or unexpected dummy P-state index to be used. [How] Update the dummy P-state logic to use DCN3.2 DML validation function. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: skip audio setup when audio stream is enabledzhikzhai1-2/+4
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: zhikzhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: update gamut remap if plane has changedHugo Hu1-0/+1
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Hugo Hu <hugo.hu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Assume an LTTPR is always present on fixed_vs linksMichael Strauss1-0/+8
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: fix dcn315 memory channel count and width readDmytro Laktyushkin2-3/+7
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Fix double cursor on non-video RGB MPOLeo Li1-2/+10
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Only consider pixle rate div policy for DCN32+Alvin Lee3-17/+2
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Port DCN30 420 logic to DCN32Chris Park3-0/+29
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amdgpu: Update PTE flags with TF enabledMukul Joshi2-4/+6
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21s390/vfio-ap: bypass unnecessary processing of AP resourcesTony Krowiak1-0/+30
It is not necessary to go through the process of validation, linking of queues to mdev and vice versa and filtering the APQNs assigned to the matrix mdev to build an AP configuration for a guest if an adapter or domain being assigned is already assigned to the matrix mdev. Likewise, it is not necessary to proceed through the process the unassignment of an adapter, domain or control domain if it is not assigned to the matrix mdev. Since it is not necessary to process assignment of a resource already assigned or process unassignment of a resource that is been assigned, this patch will bypass all assignment/unassignment operations for an adapter, domain or control domain under these circumstances. Not only is assignment of a duplicate adapter or domain unnecessary, it will also cause a hang situation when removing the matrix mdev to which it is assigned. The reason is because the same vfio_ap_queue objects with an APQN containing the APID of the adapter or APQI of the domain being assigned will get added multiple times to the hashtable that holds them. This results in the pprev and next pointers of the hlist_node (mdev_qnode field in the vfio_ap_queue object) pointing to the queue object itself resulting in an interminable loop when the mdev is removed and the queue table is iterated to reset the queues. Cc: stable@vger.kernel.org Fixes: 11cb2419fafe ("s390/vfio-ap: manage link between queue struct and matrix mdev") Reported-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-09-21i2c: mux: harden i2c_mux_alloc() against integer overflowsDan Carpenter1-2/+3
A couple years back we went through the kernel an automatically converted size calculations to use struct_size() instead. The struct_size() calculation is protected against integer overflows. However it does not make sense to use the result from struct_size() for additional math operations as that would negate any safeness. Fixes: 1f3b69b6b939 ("i2c: mux: Use struct_size() in devm_kzalloc()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-09-21i2c: mlxbf: Fix frequency calculationAsmaa Mnebhi1-40/+23
The i2c-mlxbf.c driver is currently broken because there is a bug in the calculation of the frequency. core_f, core_r and core_od are components read from hardware registers and are used to compute the frequency used to compute different timing parameters. The shifting mechanism used to get core_f, core_r and core_od is wrong. Use FIELD_GET to mask and shift the bitfields properly. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-09-21Merge tag 'opp-fixes-6.0' of ↵Rafael J. Wysocki1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP fixes for 6.0 from Viresh Kumar: "- Fix un-initialized variable usage (Christophe JAILLET). - Add missing DT properties (Rob Herring)." * tag 'opp-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes OPP: Fix an un-initialized variable usage
2022-09-21Merge tag 'dmaengine-fix-6.0' of ↵Linus Torvalds3-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of small driver fixes: - xilinx_dma: devm_platform_ioremap_resource error handling, dma_set_mask_and_coherent failure handling, dt property read cleanup - refcount leak fix for of_xudma_dev_get() - zynqmp_dma: coverity fix for enum typecast" * tag 'dmaengine-fix-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warning dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling
2022-09-21Merge tag 'linux-can-fixes-for-6.0-20220921' of ↵Jakub Kicinski2-13/+18
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-09-21 The 1st patch is by me, targets the flexcan driver and fixes a potential system hang on single core systems under high CAN packet rate. The next 2 patches are also by me and target the gs_usb driver. A potential race condition during the ndo_open callback as well as the return value if the ethtool identify feature is not supported are fixed. * tag 'linux-can-fixes-for-6.0-20220921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported can: gs_usb: gs_can_open(): fix race dev->can.state condition can: flexcan: flexcan_mailbox_read() fix return value for drop = true ==================== Link: https://lore.kernel.org/r/20220921083609.419768-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21Merge tag 'fpga-for-6.0-final' of ↵Greg Kroah-Hartman1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-linus Xu writes: FPGA Manager changes for 6.0-final Intel m10 bmc secure update - Russ's change fixes the memory leak for a sysfs node reading All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-6.0 branch). Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: m10bmc-sec: Fix possible memory leak of flash_buf
2022-09-21net: atlantic: fix potential memory leak in aq_ndev_close()Jianglei Nie1-3/+0
If aq_nic_stop() fails, aq_ndev_close() returns err without calling aq_nic_deinit() to release the relevant memory and resource, which will lead to a memory leak. We can fix it by deleting the if condition judgment and goto statement to call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-21iommu/vt-d: Check correct capability for sagaw determinationYi Liu1-1/+1
Check 5-level paging capability for 57 bits address width instead of checking 1GB large page capability. Fixes: 53fc7ad6edf2 ("iommu/vt-d: Correctly calculate sagaw value of IOMMU") Cc: stable@vger.kernel.org Reported-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com> Link: https://lore.kernel.org/r/20220916071212.2223869-2-yi.l.liu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-21Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"Lu Baolu2-9/+25
This reverts commit 9cd4f1434479f1ac25c440c421fbf52069079914. Some issues were reported on the original commit. Some thunderbolt devices don't work anymore due to the following DMA fault. DMAR: DRHD: handling fault status reg 2 DMAR: [INTR-REMAP] Request device [09:00.0] fault index 0x8080 [fault reason 0x25] Blocked a compatibility format interrupt request Bring it back for now to avoid functional regression. Fixes: 9cd4f1434479f ("iommu/vt-d: Fix possible recursive locking in intel_iommu_init()") Link: https://lore.kernel.org/linux-iommu/485A6EA5-6D58-42EA-B298-8571E97422DE@getmailspring.com/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=216497 Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: <stable@vger.kernel.org> # 5.19.x Reported-and-tested-by: George Hilliard <thirtythreeforty@gmail.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220920081701.3453504-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-21can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not ↵Marc Kleine-Budde1-6/+11
supported Until commit 409c188c57cd ("can: tree-wide: advertise software timestamping capabilities") the ethtool_ops was only assigned for devices which support the GS_CAN_FEATURE_IDENTIFY feature. That commit assigns ethtool_ops unconditionally. This results on controllers without GS_CAN_FEATURE_IDENTIFY support for the following ethtool error: | $ ethtool -p can0 1 | Cannot identify NIC: Broken pipe Restore the correct error value by checking for GS_CAN_FEATURE_IDENTIFY in the gs_usb_set_phys_id() function. | $ ethtool -p can0 1 | Cannot identify NIC: Operation not supported While there use the variable "netdev" for the "struct net_device" pointer and "dev" for the "struct gs_can" pointer as in the rest of the driver. Fixes: 409c188c57cd ("can: tree-wide: advertise software timestamping capabilities") Link: http://lore.kernel.org/all/20220818143853.2671854-1-mkl@pengutronix.de Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-21can: gs_usb: gs_can_open(): fix race dev->can.state conditionMarc Kleine-Budde1-2/+2
The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-21can: flexcan: flexcan_mailbox_read() fix return value for drop = trueMarc Kleine-Budde1-5/+5
The following happened on an i.MX25 using flexcan with many packets on the bus: The rx-offload queue reached a length more than skb_queue_len_max. In can_rx_offload_offload_one() the drop variable was set to true which made the call to .mailbox_read() (here: flexcan_mailbox_read()) to _always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too. can_rx_offload_irq_offload_fifo() looks as follows: | while (1) { | skb = can_rx_offload_offload_one(offload, 0); | if (IS_ERR(skb)) | continue; | if (!skb) | break; | ... | } The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is requested, even if there is no CAN frame pending. As the i.MX25 is a single core CPU, while the rx-offload processing is active, there is no thread to process packets from the offload queue. So the queue doesn't get any shorter and this results is a tight loop. Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested, return NULL if no CAN frame is pending. Changes since v1: https://lore.kernel.org/all/20220810144536.389237-1-u.kleine-koenig@pengutronix.de - don't break in can_rx_offload_irq_offload_fifo() in case of an error, return NULL in flexcan_mailbox_read() in case of no pending CAN frame instead Fixes: 4e9c9484b085 ("can: rx-offload: Prepare for CAN FD support") Link: https://lore.kernel.org/all/20220811094254.1864367-1-mkl@pengutronix.de Cc: stable@vger.kernel.org # v5.5 Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Thorsten Scherer <t.scherer@eckelmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-21gpiolib: cdev: Set lineevent_state::irq after IRQ register successfullyMeng Li1-2/+3
When running gpio test on nxp-ls1028 platform with below command gpiomon --num-events=3 --rising-edge gpiochip1 25 There will be a warning trace as below: Call trace: free_irq+0x204/0x360 lineevent_free+0x64/0x70 gpio_ioctl+0x598/0x6a0 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x5c/0x130 ...... el0t_64_sync+0x1a0/0x1a4 The reason of this issue is that calling request_threaded_irq() function failed, and then lineevent_free() is invoked to release the resource. Since the lineevent_state::irq was already set, so the subsequent invocation of free_irq() would trigger the above warning call trace. To fix this issue, set the lineevent_state::irq after the IRQ register successfully. Fixes: 468242724143 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-21gpio: tqmx86: fix uninitialized variable girqDongliang Mu1-2/+2
The commit 924610607f19 ("gpio: tpmx86: Move PM device over to irq domain") adds a dereference of girq that may be uninitialized. Fix this by moving irq_domain_set_pm_device into if true branch as suggested by Marc Zyngier. Fixes: 924610607f19 ("gpio: tpmx86: Move PM device over to irq domain") Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20net: sh_eth: Fix PHY state warning splat during system resumeGeert Uytterhoeven1-0/+2
Since commit 744d23c71af39c7d ("net: phy: Warn about incorrect mdio_bus_phy_resume() state"), a warning splat is printed during system resume with Wake-on-LAN disabled: WARNING: CPU: 0 PID: 626 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0xbc/0xe4 As the Renesas SuperH Ethernet driver already calls phy_{stop,start}() in its suspend/resume callbacks, it is sufficient to just mark the MAC responsible for managing the power state of the PHY. Fixes: fba863b816049b03 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/c6e1331b9bef61225fa4c09db3ba3e2e7214ba2d.1663598886.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20net: ravb: Fix PHY state warning splat during system resumeGeert Uytterhoeven1-0/+2
Since commit 744d23c71af39c7d ("net: phy: Warn about incorrect mdio_bus_phy_resume() state"), a warning splat is printed during system resume with Wake-on-LAN disabled: WARNING: CPU: 0 PID: 1197 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0xbc/0xc8 As the Renesas Ethernet AVB driver already calls phy_{stop,start}() in its suspend/resume callbacks, it is sufficient to just mark the MAC responsible for managing the power state of the PHY. Fixes: fba863b816049b03 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/8ec796f47620980fdd0403e21bd8b7200b4fa1d4.1663598796.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20ice: Fix interface being down after reset with link-down-on-close flag onMateusz Palczewski1-9/+12
When performing a reset on ice driver with link-down-on-close flag on interface would always stay down. Fix this by moving a check of this flag to ice_stop() that is called only when user wants to bring interface down. Fixes: ab4ab73fc1ec ("ice: Add ethtool private flag to make forcing link down optional") Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Petr Oros <poros@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-20ice: config netdev tc before setting queues numberMichal Swiatkowski1-0/+2
After lowering number of tx queues the warning appears: "Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled!" Example command to reproduce: ethtool -L enp24s0f0 tx 36 rx 36 Fix this by setting correct tc mapping before setting real number of queues on netdev. Fixes: 0754d65bd4be5 ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-20net: enetc: deny offload of tc-based TSN features on VF interfacesVladimir Oltean5-25/+34
TSN features on the ENETC (taprio, cbs, gate, police) are configured through a mix of command BD ring messages and port registers: enetc_port_rd(), enetc_port_wr(). Port registers are a region of the ENETC memory map which are only accessible from the PCIe Physical Function. They are not accessible from the Virtual Functions. Moreover, attempting to access these registers crashes the kernel: $ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001 fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15 fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002) fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0 $ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2 Unable to handle kernel paging request at virtual address ffff800009551a08 Internal error: Oops: 96000007 [#1] PREEMPT SMP pc : enetc_setup_tc_taprio+0x170/0x47c lr : enetc_setup_tc_taprio+0x16c/0x47c Call trace: enetc_setup_tc_taprio+0x170/0x47c enetc_setup_tc+0x38/0x2dc taprio_change+0x43c/0x970 taprio_init+0x188/0x1e0 qdisc_create+0x114/0x470 tc_modify_qdisc+0x1fc/0x6c0 rtnetlink_rcv_msg+0x12c/0x390 Split enetc_setup_tc() into separate functions for the PF and for the VF drivers. Also remove enetc_qos.o from being included into enetc-vf.ko, since it serves absolutely no purpose there. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220916133209.3351399-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20net: enetc: move enetc_set_psfp() out of the common enetc_set_features()Vladimir Oltean5-35/+44
The VF netdev driver shouldn't respond to changes in the NETIF_F_HW_TC flag; only PFs should. Moreover, TSN-specific code should go to enetc_qos.c, which should not be included in the VF driver. Fixes: 79e499829f3f ("net: enetc: add hw tc hw offload features for PSPF capability") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220916133209.3351399-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20wireguard: netlink: avoid variable-sized memcpy on sockaddrJason A. Donenfeld1-7/+6
Doing a variable-sized memcpy is slower, and the compiler isn't smart enough to turn this into a constant-size assignment. Further, Kees' latest fortified memcpy will actually bark, because the destination pointer is type sockaddr, not explicitly sockaddr_in or sockaddr_in6, so it thinks there's an overflow: memcpy: detected field-spanning write (size 28) of single field "&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16) Fix this by just assigning by using explicit casts for each checked case. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reported-by: syzbot+a448cda4dba2dac50de5@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20wireguard: ratelimiter: disable timings test by defaultJason A. Donenfeld1-15/+10
A previous commit tried to make the ratelimiter timings test more reliable but in the process made it less reliable on other configurations. This is an impossible problem to solve without increasingly ridiculous heuristics. And it's not even a problem that actually needs to be solved in any comprehensive way, since this is only ever used during development. So just cordon this off with a DEBUG_ ifdef, just like we do for the trie's randomized tests, so it can be enabled while hacking on the code, and otherwise disabled in CI. In the process we also revert 151c8e499f47. Fixes: 151c8e499f47 ("wireguard: ratelimiter: use hrtimer in selftest") Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20sfc/siena: fix null pointer dereference in efx_hard_start_xmitÍñigo Huguet1-1/+1
Like in previous patch for sfc, prevent potential (but unlikely) NULL pointer dereference. Fixes: 12804793b17c ("sfc: decouple TXQ type from label") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/r/20220915141958.16458-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20sfc/siena: fix TX channel offset when using legacy interruptsÍñigo Huguet1-1/+1
As in previous commit for sfc, fix TX channels offset when efx_siena_separate_tx_channels is false (the default) Fixes: 25bde571b4a8 ("sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/r/20220915141653.15504-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20efi: efibc: Guard against allocation failureGuilherme G. Piccoli1-0/+3
There is a single kmalloc in this driver, and it's not currently guarded against allocation failure. Do it here by just bailing-out the reboot handler, in case this tentative allocation fails. Fixes: 416581e48679 ("efi: efibc: avoid efivar API for setting variables") Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-20net: ipa: properly limit modem routing table useAlex Elder5-26/+32
IPA can route packets between IPA-connected entities. The AP and modem are currently the only such entities supported, and no routing is required to transfer packets between them. The number of entries in each routing table is fixed, and defined at initialization time. Some of these entries are designated for use by the modem, and the rest are available for the AP to use. The AP sends a QMI message to the modem which describes (among other things) information about routing table memory available for the modem to use. Currently the QMI initialization packet gives wrong information in its description of routing tables. What *should* be supplied is the maximum index that the modem can use for the routing table memory located at a given location. The current code instead supplies the total *number* of routing table entries. Furthermore, the modem is granted the entire table, not just the subset it's supposed to use. This patch fixes this. First, the ipa_mem_bounds structure is generalized so its "end" field can be interpreted either as a final byte offset, or a final array index. Second, the IPv4 and IPv6 (non-hashed and hashed) table information fields in the QMI ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds rather than ipa_mem_array structures. Third, we set the "end" value for each routing table to be the last index, rather than setting the "count" to be the number of indices. Finally, instead of allowing the modem to use all of a routing table's memory, it is limited to just the portion meant to be used by the modem. In all versions of IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries. Update a few comments for clarity. Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20of: mdio: Add of_node_put() when breaking out of for_each_xxLiang He1-0/+1
In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node(). Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20drm/i915/gem: Really move i915_gem_context.link under ref protectionChris Wilson1-4/+4
i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915] [ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff [ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202 [ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000 [ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68 [ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc [ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860 [ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc [ 4070.575016] FS: 00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000 [ 4070.575021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0 [ 4070.575029] Call Trace: [ 4070.575033] <TASK> [ 4070.575037] lrc_configure_all_contexts+0x13e/0x150 [i915] [ 4070.575103] gen8_enable_metric_set+0x4d/0x90 [i915] [ 4070.575164] i915_perf_open_ioctl+0xbc0/0x1500 [i915] [ 4070.575224] ? asm_common_interrupt+0x1e/0x40 [ 4070.575232] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575290] drm_ioctl_kernel+0x85/0x110 [ 4070.575296] ? update_load_avg+0x5f/0x5e0 [ 4070.575302] drm_ioctl+0x1d3/0x370 [ 4070.575307] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575382] ? gen8_gt_irq_handler+0x46/0x130 [i915] [ 4070.575445] __x64_sys_ioctl+0x3c4/0x8d0 [ 4070.575451] ? __do_softirq+0xaa/0x1d2 [ 4070.575456] do_syscall_64+0x35/0x80 [ 4070.575461] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4070.575467] RIP: 0033:0x7f1ed5c10397 [ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397 [ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006 [ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005 [ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a [ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0 [ 4070.575505] </TASK> [ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus(E) cfbcopyarea(E) video(E) button(E) efivarfs(E) autofs4(E) [ 4070.575549] ---[ end trace 0000000000000000 ]--- v3: fix incorrect syntax of spin_lock() replacing spin_lock_irqsave() v2: irqsave not required in a worker, neither conversion to irq safe elsewhere (Tvrtko), - perf: it's safe to call gen8_configure_context() even if context has been closed, no need to check, - drop unrelated cleanup (Andi, Tvrtko) Reported-by: Mark Janes <mark.janes@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/issues/6222 References: a4e7ccdac38e ("drm/i915: Move context management under GEM") Fixes: f8246cf4d9a9 ("drm/i915/gem: Drop free_work for GEM contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-3-janusz.krzysztofik@linux.intel.com (cherry picked from commit ad3aa7c31efa5a09b0dba42e66cfdf77e0db7dc2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-20drm/i915/gem: Flush contexts on driver releaseJanusz Krzysztofik1-1/+2
Due to i915_perf assuming that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration, we need to defer removal of the context from the list until last reference to the context is put. However, there is a risk of triggering kernel warning on contexts list not empty at driver release time if we deleagate that task to a worker for i915_gem_context_release_work(), unless that work is flushed first. Unfortunately, it is not flushed on driver release. Fix it. Instead of additionally calling flush_workqueue(), either directly or via a new dedicated wrapper around it, replace last call to i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue() that performs both tasks. Fixes: 75eefd82581f ("drm/i915: Release i915_gem_context from a worker") Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: stable@kernel.org # v5.16+ Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 1cec34442408a77ba5396b19725fed2c398005c3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-20gpio: ftgpio010: Make irqchip immutableLinus Walleij1-9/+13
This turns the FTGPIO010 irqchip immutable. Tested on the D-Link DIR-685. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20gpio: mockup: Fix potential resource leakage when register a chipAndy Shevchenko1-1/+3
If creation of software node fails, the locally allocated string array is left unfreed. Free it on error path. Fixes: 6fda593f3082 ("gpio: mockup: Convert to use software nodes") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20gpio: mockup: fix NULL pointer dereference when removing debugfsBartosz Golaszewski1-1/+1
We now remove the device's debugfs entries when unbinding the driver. This now causes a NULL-pointer dereference on module exit because the platform devices are unregistered *after* the global debugfs directory has been recursively removed. Fix it by unregistering the devices first. Fixes: 303e6da99429 ("gpio: mockup: remove gpio debugfs when remove device") Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"Francesco Dolcini3-19/+27
This reverts commit b353b241f1eb9b6265358ffbe2632fdcb563354f, this is creating multiple issues, just not ready to be merged yet. Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/ Link: https://lore.kernel.org/all/20220907143915.5w65kainpykfobte@pengutronix.de/ Fixes: b353b241f1eb ("net: fec: Use a spinlock to guard `fep->ptp_clk_on`") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-20Revert "fec: Restart PPS after link state change"Francesco Dolcini3-77/+4
This reverts commit f79959220fa5fbda939592bf91c7a9ea90419040, this is creating multiple issues, just not ready to be merged yet. Link: https://lore.kernel.org/all/20220905180542.GA3685102@roeck-us.net/ Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/ Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-20net: dsa: microchip: lan937x: fix maximum frame length checkRakesh Sankaranarayanan1-4/+0
Maximum frame length check is enabled in lan937x switch on POR, But it is found to be disabled on driver during port setup operation. Due to this, packets are not dropped when transmitted with greater than configured value. For testing, setup made for lan1->lan2 transmission and configured lan1 interface with a frame length (less than 1500 as mentioned in documentation) and transmitted packets with greater than configured value. Expected no packets at lan2 end, but packets observed at lan2. Based on the documentation, packets should get discarded if the actual packet length doesn't match the frame length configured. Frame length check should be disabled only for cascaded ports due to tailtags. This feature was disabled on ksz9477 series due to ptp issue, which is not in lan937x series. But since lan937x took ksz9477 as base, frame length check disabled here as well. Patch added to remove this portion from port setup so that maximum frame length check will be active for normal ports. Fixes: 55ab6ffaf378 ("net: dsa: microchip: add DSA support for microchip LAN937x") Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Link: https://lore.kernel.org/r/20220912051228.1306074-1-rakesh.sankaranarayanan@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-20drm/hisilicon: Add depends on MMURandy Dunlap1-0/+1
The Kconfig symbol depended on MMU but was dropped by the commit acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") because it already had as a dependency ARM64 that already selects MMU. But later, commit a0f25a6bb319 ("drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64 when COMPILE_TEST is set but that could lead to unmet direct dependencies and linking errors. Prevent a kconfig warning when MMU is not enabled by making DRM_HISI_HIBMC depend on MMU. WARNING: unmet direct dependencies detected for DRM_TTM Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n] Selected by [m]: - DRM_TTM_HELPER [=m] && HAS_IOMEM [=y] && DRM [=m] - DRM_HISI_HIBMC [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && (ARM64 || COMPILE_TEST [=y]) Fixes: acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: John Stultz <jstultz@google.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap@infradead.org
2022-09-20drm/mgag200: Force 32 bpp on the consoleThomas Zimmermann1-1/+5
G200ER does not seem to support 24 bpp, so force the console to use 32 bpp. The problem got introduced when commit 73f54d5d9682 ("drm/mgag200: Remove special case for G200SE with <2 MiB") changed the preferred color depth from 32 bit to 24 bit. A setting of 24 is the correct color depth, but G200ER doesn't seem to be able to use the respective RGB888 color format. Using 24-bit color with forced 32 bpp works around the problem. Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Wang Yugui <wangyugui@e16-tech.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: 73f54d5d9682 ("drm/mgag200: Remove special case for G200SE with <2 MiB") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220915150348.31504-1-tzimmermann@suse.de
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-29 12:31:53 +0000