summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-02-17omap3630: nand: fix device size to work in polled modeSukumar Ghorai1-1/+1
zoom3 and 3630-sdp having the x16 nand device. This patch configure gpmc as x16 and select the currect function in driver for polled mode (without prefetch enable) transfer. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17Merge branches 'devel-hwspinlock' and 'devel-mcspi' into omap-for-linusTony Lindgren1-154/+68
2011-02-17OMAP: runtime: McSPI driver runtime conversionGovindraj.R1-74/+42
McSPI runtime conversion. Changes involves: 1) remove clock framework apis to use runtime framework apis. 2) context restore from runtime resume which is a callback for get_sync. 3) Remove SYSCONFIG(sysc) register handling (a) Remove context save and restore of sysc reg and remove soft reset done from sysc reg as this will be done with hwmod framework. (b) Also cleanup sysc reg bit macros. 4) Rename the omap2_mcspi_reset function to omap2_mcspi_master_setup function as with hwmod changes soft reset will be done in hwmod framework itself and use the return value from clock enable function to return for failure scenarios. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Partha Basak <p-basak2@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17OMAP: devices: Modify McSPI device to adapt to hwmod frameworkCharulatha V1-83/+29
Cleans up all base address definitions for omap_mcspi and adapts the device registration and driver to hwmod framework. Changes involves: 1) Removing all base address macro defines. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute(number of chipselect). 3) Appending base address with pdata reg_offset for omap4 boards. For omap4 all regs used in driver deviate with reg_offset_macros defined with an value of 0x100. So pass this offset through pdata and append the same to base address retrieved from hwmod data file and we are not mapping *_HL_* regs which are not used in driver. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Partha Basak <p-basak2@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17drivers: hwspinlock: add OMAP implementationSimon Que3-0/+241
Add hwspinlock support for the OMAP4 Hardware Spinlock device. The Hardware Spinlock device on OMAP4 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP). [ohad@wizery.com: adapt to hwspinlock framework, tidy up] Signed-off-by: Simon Que <sque@ti.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Krishnamoorthy, Balaji T <balajitk@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17drivers: hwspinlock: add frameworkOhad Ben-Cohen6-0/+631
Add a platform-independent hwspinlock framework. Hardware spinlock devices are needed, e.g., in order to access data that is shared between remote processors, that otherwise have no alternative mechanism to accomplish synchronization and mutual exclusion operations. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Hari Kanigeri <h-kanigeri2@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren7-10/+10
'devel-ti816x' into omap-for-linus
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds5-45/+44
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
2011-02-16m68knommu: fix dereference of port.ttyGreg Ungerer1-15/+14
The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-15Merge branch 'drm-fixes' of ↵Linus Torvalds45-299/+676
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: hopefully fix pll issues for real (v3) drm/radeon/kms: add bounds checking to avivo pll algo drm: fix wrong usages of drm_device in DRM Developer's Guide drm/radeon/kms: fix a few more atombios endian issues drm/radeon/kms: improve 6xx/7xx CS error output drm/radeon/kms: check AA resolve registers on r300 drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300 drm/radeon/kms: use linear aligned for evergreen/ni bo blits drm/radeon/kms: use linear aligned for 6xx/7xx bo blits drm/radeon: fix race between GPU reset and TTM delayed delete thread. drm/radeon/kms: evergreen/ni big endian fixes (v2) drm/radeon/kms: 6xx/7xx big endian fixes drm/radeon/kms: atombios big endian fixes drm/radeon: 6xx/7xx non-kms endian fixes drm/radeon/kms: optimize CS state checking for r100->r500 drm: do not leak kernel addresses via /proc/dri/*/vma drm/radeon/kms: add connector table for mac g5 9600 radeon mkregtable: Add missing fclose() calls drm/radeon/kms: fix interlaced modes on dce4+ drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46 ...
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read
2011-02-15Merge branch 'release' of ↵Linus Torvalds4-31/+54
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Video: Probe for output switch method when searching video devices. ACPI / Wakeup: Enable button GPEs unconditionally during initialization ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)
2011-02-15Merge branch 'iomem' into releaseLen Brown1-7/+18
2011-02-15Merge branch 'fixes' of ↵Linus Torvalds4-115/+102
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits) dmaengine: add slave-dma maintainer dma: ipu_idmac: do not lose valid received data in the irq handler dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg() dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop() dmaengine: imx-sdma: return sdmac->status in sdma_tx_status() dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg() dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg() dmaengine i.MX dma: initialize dma capabilities outside channel loop dmaengine i.MX DMA: do not initialize chan_id field dmaengine i.MX dma: check sg entries for valid addresses and lengths dmaengine i.MX dma: set maximum segment size for our device dmaengine i.MX SDMA: reserve channel 0 by not registering it dmaengine i.MX SDMA: initialize dma capabilities outside channel loop dmaengine i.MX SDMA: do not initialize chan_id field dmaengine i.MX sdma: check sg entries for valid addresses and lengths dmaengine i.MX sdma: set maximum segment size for our device DMA: PL08x: fix channel pausing to timeout rather than lockup DMA: PL08x: fix infinite wait when terminating transfers dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie() dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0 ...
2011-02-15Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, dmi, debug: Log board name (when present) in dmesg/oops output x86, ioapic: Don't warn about non-existing IOAPICs if we have none x86: Fix mwait_usable section mismatch x86: Readd missing irq_to_desc() in fixup_irq() x86: Fix section mismatch in LAPIC initialization
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds7-52/+70
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: matrix_keypad - increase the limit of rows and columns Input: wacom - fix error path in wacom_probe() Input: ads7846 - check proper condition when freeing gpio Revert "Input: do not pass injected events back to the originating handler" Input: sysrq - rework re-inject logic Input: serio - clear pending rescans after sysfs driver rebind Input: rotary_encoder - use proper irqflags Input: wacom_w8001 - report resolution to userland
2011-02-15pci: use security_capable() when checking capablities during config space readChris Wright1-1/+2
This reintroduces commit 47970b1b which was subsequently reverted as f00eaeea. The original change was broken and caused X startup failures and generally made privileged processes incapable of reading device dependent config space. The normal capable() interface returns true on success, but the LSM interface returns 0 on success. This thinko is now fixed in this patch, and has been confirmed to work properly. So, once again...Eric Paris noted that commit de139a3 ("pci: check caps from sysfs file open to read device dependent config space") caused the capability check to bypass security modules and potentially auditing. Rectify this by calling security_capable() when checking the open file's capabilities for config space reads. Reported-by: Eric Paris <eparis@redhat.com> Tested-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: James Morris <jmorris@namei.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Riesen <raa.lkml@gmail.com> Cc: Sedat Dilek <sedat.dilek@googlemail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: James Morris <jmorris@namei.org>
2011-02-15x86, dmi, debug: Log board name (when present) in dmesg/oops outputNaga Chumbalkar1-2/+9
The "Type 2" SMBIOS record that contains Board Name is not strictly required and may be absent in the SMBIOS on some platforms. ( Please note that Type 2 is not listed in Table 3 in Sec 6.2 ("Required Structures and Data") of the SMBIOS v2.7 Specification. ) Use the Manufacturer Name (aka System Vendor) name. Print Board Name only when it is present. Before the fix: (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6 After the fix: (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6 Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: <stable@kernel.org> # .3x - good for debugging, please apply as far back as it applies cleanly LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-15drm/radeon/kms: hopefully fix pll issues for real (v3)Alex Deucher1-14/+8
The problematic boards have a recommended reference divider to be used when spread spectrum is enabled on the laptop panel. Enable the use of the recommended reference divider along with the new pll algo. v2: testing options v3: When using the fixed reference divider with LVDS, prefer min m to max p and use fractional feedback dividers. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28852 https://bugzilla.kernel.org/show_bug.cgi?id=24462 https://bugzilla.kernel.org/show_bug.cgi?id=26552 MacbookPro issues reported by Justin Mattock <justinmattock@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-15drm/radeon/kms: add bounds checking to avivo pll algoAlex Deucher1-0/+10
Prevent divider overflow. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28932 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-15drm/radeon/kms: fix a few more atombios endian issuesAlex Deucher2-7/+7
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14Merge branch 'rtc-for-linus' of ↵Linus Torvalds21-313/+232
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Fix minor compile warning RTC: Convert rtc drivers to use the alarm_irq_enable method RTC: Fix rtc driver ioctl specific shortcutting
2011-02-14Merge branch 'imx' into dmaengine-fixesDan Williams2-39/+63
2011-02-14dma: ipu_idmac: do not lose valid received data in the irq handlerAnatolij Gustschin1-50/+0
Currently when two or more buffers are queued by the camera driver and so the double buffering is enabled in the idmac, we lose one frame comming from CSI since the reporting of arrival of the first frame is deferred by the DMAIC_7_EOF interrupt handler and reporting of the arrival of the last frame is not done at all. So when requesting N frames from the image sensor we actually receive N - 1 frames in user space. The reason for this behaviour is that the DMAIC_7_EOF interrupt handler misleadingly assumes that the CUR_BUF flag is pointing to the buffer used by the IDMAC. Actually it is not the case since the CUR_BUF flag will be flipped by the FSU when the FSU is sending the <TASK>_NEW_FRM_RDY signal when new frame data is delivered by the CSI. When sending this singal, FSU updates the DMA_CUR_BUF and the DMA_BUFx_RDY flags: the DMA_CUR_BUF is flipped, the DMA_BUFx_RDY is cleared, indicating that the frame data is beeing written by the IDMAC to the pointed buffer. DMA_BUFx_RDY is supposed to be set to the ready state again by the MCU, when it has handled the received data. DMAIC_7_CUR_BUF flag won't be flipped here by the IPU, so waiting for this event in the EOF interrupt handler is wrong. Actually there is no spurious interrupt as described in the comments, this is the valid DMAIC_7_EOF interrupt indicating reception of the frame from CSI. The patch removes code that waits for flipping of the DMAIC_7_CUR_BUF flag in the DMAIC_7_EOF interrupt handler. As the comment in the current code denotes, this waiting doesn't help anyway. As a result of this removal the reporting of the first arrived frame is not deferred to the time of arrival of the next frame and the drivers software flag 'ichan->active_buffer' is in sync with DMAIC_7_CUR_BUF flag, so the reception of all requested frames works. This has been verified on the hardware which is triggering the image sensor by the programmable state machine, allowing to obtain exact number of frames. On this hardware we do not tolerate losing frames. This patch also removes resetting the DMA_BUFx_RDY flags of all channels in ipu_disable_channel() since transfers on other DMA channels might be triggered by other running tasks and the buffers should always be ready for data sending or reception. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-02-14Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixesDave Airlie11-99/+229
* 'intel/drm-intel-fixes' of /ssd/git/drm-next: drm/i915: Fix resume regression from 5d1d0cc drm/i915/tv: Use polling rather than interrupt-based hotplug drm/i915: Trigger modesetting if force-audio changes drm/i915/sdvo: If we have an EDID confirm it matches the mode of the connection drm/i915: Disable RC6 on Ironlake drm/i915/lvds: Restore dithering on native modes for gen2/3 drm/i915: Invalidate TLB caches on SNB BLT/BSD rings
2011-02-14drm/radeon/kms: improve 6xx/7xx CS error outputAlex Deucher1-20/+26
Makes debugging CS rejections much easier. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: check AA resolve registers on r300Marek Olšák8-13/+49
This is an important security fix because we allowed arbitrary values to be passed to AARESOLVE_OFFSET. This also puts the right buffer address in the register. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300Marek Olšák5-12/+5
Also move ZB_DEPTHCLEARVALUE to the list of safe regs. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: use linear aligned for evergreen/ni bo blitsAlex Deucher1-2/+2
Not only is linear aligned supposedly more performant, linear general is only supported by the CB in single slice mode. The texture hardware doesn't support linear general, but I think the hw automatically upgrades it to linear aligned. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: use linear aligned for 6xx/7xx bo blitsAlex Deucher1-2/+2
Not only is linear aligned supposedly more performant, linear general is only supported by the CB in single slice mode. The texture hardware doesn't support linear general, but I think the hw automatically upgrades it to linear aligned. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon: fix race between GPU reset and TTM delayed delete thread.Dave Airlie1-0/+4
My evergreen has been in a remote PC for week and reset has never once saved me from certain doom, I finally relocated to the box with a serial cable and noticed an oops when the GPU resets, and the TTM delayed delete thread tries to remove something from the GTT. This stops the delayed delete thread from executing across the GPU reset handler, and woot I can GPU reset now. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: evergreen/ni big endian fixes (v2)Alex Deucher4-10/+40
Based on 6xx/7xx endian fixes from Cédric Cano. v2: fix typo in shader Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: 6xx/7xx big endian fixesCédric Cano6-20/+54
agd5f: minor cleanups Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: atombios big endian fixesCédric Cano3-52/+52
agd5f: additional cleanups/fixes Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon: 6xx/7xx non-kms endian fixesCédric Cano3-9/+34
agd5f: minor cleanups Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: optimize CS state checking for r100->r500Marek Olšák4-12/+77
The colorbuffer, zbuffer, and texture states are checked only once when they get changed. This improves performance in the apps which emit lots of draw packets and few state changes. This drops performance in glxgears by a 1% or so, but glxgears is not a benchmark we care about. The time spent in the kernel when running Torcs dropped from 33% to 23% and the frame rate is higher, which is a good thing. r600 might need something like this as well. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm: do not leak kernel addresses via /proc/dri/*/vmaKees Cook1-4/+5
In the continuing effort to avoid kernel addresses leaking to unprivileged users, this patch switches to %pK for /proc/dri/*/vma. Signed-off-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: add connector table for mac g5 9600Alex Deucher2-0/+48
PPC Mac cards do not provide connector tables in their vbios. Their connector/encoder configurations must be hardcoded in the driver. verified by nyef on #radeon Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14radeon mkregtable: Add missing fclose() callsJesper Juhl1-1/+4
drivers/gpu/drm/radeon/mkregtable.c:parser_auth() almost always remembers to fclose(file) before returning, but it misses two spots. This is not really important since the process will exit shortly after and thus close the file for us, but being explicit prevents static analysis tools from complaining about leaked memory and missing fclose() calls and it also seems to be the prefered style of the existing code to explicitly close the file. So, here's a patch to add the two missing fclose() calls. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: fix interlaced modes on dce4+Alex Deucher2-22/+20
- set scaler table clears the interleave bit, need to reset it in encoder quirks, this was already done for pre-dce4. - remove the interleave settings from set_base() functions this is now handled in the encoder quirks functions, and isn't technically part of the display base setup. - rename evergreen_do_set_base() to dce4_do_set_base() since it's used on both evergreen and NI asics. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28182 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46Dave Airlie1-2/+2
The old code dereferenced a value, the new code just needs to pass the ptr. fixes an oops looking at files in debugfs. cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-13Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-2/+4
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: devicetree-discuss is moderated for non-subscribers MAINTAINERS: Add entry for GPIO subsystem dt: add documentation of ARM dt boot interface dt: Remove obsolete description of powerpc boot interface dt: Move device tree documentation out of powerpc directory spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops
2011-02-13Revert "pci: use security_capable() when checking capablities during config ↵Linus Torvalds1-2/+1
space read" This reverts commit 47970b1b2aa64464bc0a9543e86361a622ae7c03. It turns out it breaks several distributions. Looks like the stricter selinux checks fail due to selinux policies not being set to allow the access - breaking X, but also lspci. So while the change was clearly the RightThing(tm) to do in theory, in practice we have backwards compatibility issues making it not work. Reported-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: David Airlie <airlied@linux.ie> Acked-by: Alex Riesen <raa.lkml@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-12Merge branch 'devicetree/merge' into spi/mergeGrant Likely468-3239/+3266
2011-02-12ACPI / Video: Probe for output switch method when searching video devices.Michael Karcher1-0/+5
This patch reverts one hunk of 677bd810eedce61edf15452491781ff046b92edc "ACPI video: remove output switching control", namely the removal of probing for _DOS/_DOD when searching for video devices. This is needed on some Fujitsu Laptops (at least S7110, P8010) for the ACPI backlight interface to work, as an these machines, neither ROM nor posting methods are available, and after removal of output switching, none of the caps triggers, which prevents the backlight search from being entered. Tested on a Fujitsu Lifebook S7110 and Fujitsu Lifebook P8010. This probably fixes https://bugzilla.kernel.org/show_bug.cgi?id=27312 for the people who have no entry in /sys/class/backlight. This is the complete list of public (starting with "_") methods implemented on the S7110, BIOS rev 1.34: \_SB_.PCI0.GFX0._ADR \_SB_.PCI0.GFX0._DOS \_SB_.PCI0.GFX0._DOD \_SB_.PCI0.GFX0.CRT._ADR \_SB_.PCI0.GFX0.CRT._DCS \_SB_.PCI0.GFX0.CRT._DGS \_SB_.PCI0.GFX0.CRT._DSS \_SB_.PCI0.GFX0.LCD._ADR \_SB_.PCI0.GFX0.LCD._BCL \_SB_.PCI0.GFX0.LCD._BCM \_SB_.PCI0.GFX0.LCD._BQC \_SB_.PCI0.GFX0.LCD._DCS \_SB_.PCI0.GFX0.LCD._DGS \_SB_.PCI0.GFX0.LCD._DSS \_SB_.PCI0.GFX0.LCD._PS0 \_SB_.PCI0.GFX0.LCD._PS3 \_SB_.PCI0.GFX0.TV._ADR \_SB_.PCI0.GFX0.TV._DCS \_SB_.PCI0.GFX0.TV._DGS \_SB_.PCI0.GFX0.TV._DSS \_SB_.PCI0.GFX0.DVI._ADR \_SB_.PCI0.GFX0.DVI._DCS \_SB_.PCI0.GFX0.DVI._DGS \_SB_.PCI0.GFX0.DVI._DSS Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-12ACPI / Wakeup: Enable button GPEs unconditionally during initializationRafael J. Wysocki1-1/+5
Commit 9630bdd (ACPI: Use GPE reference counting to support shared GPEs) introduced a suspend regression where boxes resume immediately after being suspended due to the lid or sleep button wakeup status not being cleared properly. This happens if the GPEs corresponding to those devices are not enabled all the time, which apparently is expected by some BIOSes. To fix this problem, enable button and lid GPEs unconditionally during initialization and keep them enabled all the time, regardless of whether or not the ACPI button driver is used. References: https://bugzilla.kernel.org/show_bug.cgi?id=27372 Reported-and-tested-by: Ferenc Wágner <wferi@niif.hu> Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-12ACPI / ACPICA: Avoid crashing if _PRW is defined for the root objectRafael J. Wysocki1-23/+26
Some ACPI BIOSes define _PRW for the root object which causes acpi_setup_gpe_for_wake() to crash when trying to dereference the bogus device_node pointer. Avoid the crash by checking if wake_device is not the root object before attempting to set up the "implicit notify" mechanism for it. The problem was introduced by commit bba63a296ffab20e08d9e8252d2f0d99 (ACPICA: Implicit notify support) that added the wake_device argument to acpi_setup_gpe_for_wake(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-20/+8
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix DIMMs per DCTs output
2011-02-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2-13/+48
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (emc1403) Fix I2C address range hwmon: (lm63) Consider LM64 temperature offset
2011-02-11Merge branch 'for-linus' of ↵Linus Torvalds4-4/+23
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read security: add cred argument to security_capable() tpm_tis: Use timeouts returned from TPM
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-13 19:11:39 +0000