summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-07-08mlxsw: core_acl_flex_keys: Split MAC and IP address flex key elementsJiri Pirko4-62/+96
Since in Spectrum-2, MACs are split and IP addresses are split as well, in order to use the same elements for Spectrum and Spectrum-2 split them now. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08mlxsw: spectrum_acl: Ignore always-zeroed bits in tp->prioJiri Pirko1-1/+1
The lowest 16 bits of tp->prio are always zero, so ignore them with a shift. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08mlxsw: reg: Introduce Flex2 key type for PTAR registerJiri Pirko2-5/+15
Introduce Flex2 key type for PTAR register which is used in Spectrum-2. Also, extend mlxsw_reg_ptar_pack() to set the value according to the caller. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08mlxsw: spectrum: Change name of mlxsw_sp_afk_blocks to mlxsw_sp1_afk_blocksJiri Pirko2-4/+4
This is specific for Spectrum as Spectrum-2 has completely different key blocks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08isdn/capi: fix defined but not used warningsRandy Dunlap2-3/+5
Fix build warnings in drivers/isdn/capi/ when CONFIG_PROC_FS is not enabled by marking the unused functions as __maybe_unused. ../drivers/isdn/capi/capi.c:1324:12: warning: 'capi20_proc_show' defined but not used [-Wunused-function] ../drivers/isdn/capi/capi.c:1347:12: warning: 'capi20ncci_proc_show' defined but not used [-Wunused-function] ../drivers/isdn/capi/capidrv.c:2454:12: warning: 'capidrv_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: isdn4linux@listserv.isdn4linux.de (subscribers-only) Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08connector: fix defined but not used warningRandy Dunlap1-1/+2
Fix a build warning in connector.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/connector/connector.c:242:12: warning: 'cn_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07drivers: net: lmc: remove redundant variable next_rxColin Ian King1-2/+0
Variable next_rx is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'next_rx' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: ethernet: ti: cpsw: allow PTP 224.0.0.107 to be timestampedIvan Khoronzhuk1-1/+2
Tested on AM572x with cpsw v1.15 for PTP sync and delay_req messages. It doesn't work on cpsw v1.12, so added only for cpsw v > 1.15. Command for testing: ptp4l -P -4 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg where ptp.cfg: [global] tx_timestamp_timeout 20 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: ethernet: ti: cpsw: use BIT macroIvan Khoronzhuk1-17/+17
It's needed to avoid checkpatch warnings for farther changes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07stmmac: fix signed 64-bit divisionArnd Bergmann1-6/+4
I link error on 32-bit ARM points to yet another arithmetic bug: drivers/net/ethernet/stmicro/stmmac/stmmac_tc.o: In function `tc_setup_cbs': stmmac_tc.c:(.text+0x148): undefined reference to `__aeabi_uldivmod' stmmac_tc.c:(.text+0x1fc): undefined reference to `__aeabi_uldivmod' stmmac_tc.c:(.text+0x308): undefined reference to `__aeabi_uldivmod' stmmac_tc.c:(.text+0x320): undefined reference to `__aeabi_uldivmod' stmmac_tc.c:(.text+0x33c): undefined reference to `__aeabi_uldivmod' drivers/net/ethernet/stmicro/stmmac/stmmac_tc.o:stmmac_tc.c:(.text+0x3a4): more undefined references to `__aeabi_uldivmod' follow I observe that the last change to add the 'ul' prefix was incorrect, as it did not turn the result of the multiplication into a 64-bit expression on 32-bit architectures. Further, it seems that the do_div() macro gets confused by the fact that we pass a signed variable rather than unsigned into it. This changes the code to instead use the div_s64() helper that is meant for signed division, along with changing the constant suffix to 'll' to actually make it a 64-bit argument everywhere, fixing both of the issues I pointed out. I'm not completely convinced that this makes the code correct, but I'm fairly sure that we have two problems less than before. Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC") Fixes: c18a9c096683 ("net: stmmac_tc: use 64-bit arithmetic instead of 32-bit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07farsync: remove redundant variable txq_lengthColin Ian King1-2/+0
Variable txq_length is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'txq_length' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07vxlan: fix default fdb entry netlink notify ordering during netdev createRoopa Prabhu1-8/+21
Problem: In vxlan_newlink, a default fdb entry is added before register_netdev. The default fdb creation function also notifies user-space of the fdb entry on the vxlan device which user-space does not know about yet. (RTM_NEWNEIGH goes before RTM_NEWLINK for the same ifindex). This patch fixes the user-space netlink notification ordering issue with the following changes: - decouple fdb notify from fdb create. - Move fdb notify after register_netdev. - Call rtnl_configure_link in vxlan newlink handler to notify userspace about the newlink before fdb notify and hence avoiding the user-space race. Fixes: afbd8bae9c79 ("vxlan: add implicit fdb entry for default destination") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07vxlan: make netlink notify in vxlan_fdb_destroy optionalRoopa Prabhu1-6/+8
Add a new option do_notify to vxlan_fdb_destroy to make sending netlink notify optional. Used by a later patch. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07vxlan: add new fdb alloc and create helpersRoopa Prabhu1-29/+62
- Add new vxlan_fdb_alloc helper - rename existing vxlan_fdb_create into vxlan_fdb_update: because it really creates or updates an existing fdb entry - move new fdb creation into a separate vxlan_fdb_create Main motivation for this change is to introduce the ability to decouple vxlan fdb creation and notify, used in a later patch. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07mlxsw: spectrum_router: avoid uninitialized variable accessArnd Bergmann1-4/+2
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, gcc correctly points out that the 'vid' variable is uninitialized whenever br_vlan_get_pvid returns an error: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_rif_vlan_fid_get': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6881:6: error: 'vid' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the condition check to always return -EINVAL here, which I guess is what the author intended here. Fixes: e6f1960ae6c7 ("mlxsw: spectrum_router: Allocate FID according to PVID") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Prevent sending command during global or core resetHuazhong Tan3-1/+6
According to hardware's description, driver should not send command to IMP while hardware doing global or core reset. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Remove the warning when clear reset causePeng Li1-2/+0
Only the core/global/IMP reset need clear cause, other type does not need do it. The warning may be treated as error as it is normal. This patch removes the warning. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix get_vector ops in hclgevf_main moduleYunsheng Lin1-1/+10
The hclgevf_free_vector function expects the caller to pass the vector_id to it, and hclgevf_put_vector pass vector to it now, which will cause vector allocation problem. This patch fixes it by converting vector into vector_id before calling hclgevf_free_vector. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix warning bug when doing lp selftestYunsheng Lin1-0/+2
The napi_alloc_skb is excepted to be called under the non-preemptible code path when it is called by hns3_clean_rx_ring during loopback selftest, otherwise the below warning will be logged: [ 92.420780] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/1873 <SNIP> [ 92.463202] check_preemption_disabled+0xf8/0x100 [ 92.467893] debug_smp_processor_id+0x1c/0x28 [ 92.472239] __napi_alloc_skb+0x30/0x130 [ 92.476158] hns3_clean_rx_ring+0x118/0x5f0 [hns3] [ 92.480941] hns3_self_test+0x32c/0x4d0 [hns3] [ 92.485375] ethtool_self_test+0xdc/0x1e8 [ 92.489372] dev_ethtool+0x1020/0x1da8 [ 92.493109] dev_ioctl+0x188/0x3a0 [ 92.496499] sock_do_ioctl+0xf4/0x208 [ 92.500148] sock_ioctl+0x228/0x3e8 [ 92.503626] do_vfs_ioctl+0xc4/0x880 [ 92.507189] SyS_ioctl+0x94/0xa8 [ 92.510404] el0_svc_naked+0x30/0x34 This patch fix it by disabling preemption when calling hns3_clean_rx_ring during loopback selftest. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Add configure for mac minimal frame sizeJian Shen2-1/+3
When change the mtu, the minimal frame size of mac will be set to zero, it is incorrect. This patch fixes it by set it to the default value. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for mailbox message truncated problemFuyun Liang1-1/+2
The payload of mailbox message is 16 byte and the value of HCLGE_MBX_MAX_ARQ_MSG_SIZE is 8. A message truncated problem will happen when mailbox message is converted to ARQ message. This patch replaces HCLGE_MBX_MAX_ARQ_MSG_SIZE with the size of ARQ message in hclgevf_mbx_handler to fix this problem. Fixes: b11a0bb231f3 ("net: hns3: Add mailbox support to VF driver") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for l4 checksum offload bugYunsheng Lin1-3/+3
Hardware only support tcp/udp/sctp l4 checksum offload, but the driver currently tell hardware to do l4 checksum offlad when l3 is IPv4 or IPv6, which may cause checksumm error. This patch fixes it by only enabling the l4 offload when l4 is tcp/udp/sctp. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for waterline not setting correctlyYunsheng Lin1-16/+6
The HCLGE_RX_PRIV_EN_B is used to tell the firmware whether to update the specific waterline value, if the is not set, the firmware will ignore the value. This patch fixes by setting the HCLGE_RX_PRIV_EN_B even if the updated value is zero. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for mac pause not disable in pfc modeYunsheng Lin1-2/+7
When pfc pause mode is enable, the mac pause mode need to be disabled, otherwise the pfc pause packet will not be sent when congestion happens. This patch fixes by disabling the mac pause when pfc pause is enabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix tc setup when netdev is first upYunsheng Lin1-47/+31
Currently, tc related configuration is not setup when the netdev is first up, which cause the stack only using tc 0 problem. This patch fixes it by setting the tc related configuration using the info from NCL_CONFIG when netdev is first up. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07liquidio: fix kernel panic when NIC firmware is older than 1.7.2Rick Farrington2-2/+33
Pre-1.7.2 NIC firmware does not support (and does not respond to) the "get speed" command which is sent by the 1.7.2 driver (for CN23XX-225 cards only) during modprobe. Due to a bug in older firmware (with respect to unknown commands), this unsupported command causes a cascade of errors that ends in a kernel panic. Fix it by making the sending of the "get speed" command conditional on the firmware version. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05cxgb4: Fix the condition to check if the card is T5Ganesh Goudar1-1/+1
Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d452923ae6 ("cxgb4: clean up init_one") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: sun: remove redundant variables adv and lpa and mii_readsColin Ian King1-16/+0
Variables adv and lpa are being assigned but are never used hence they are redundant and can be removed. Also remove the unncessary mii_reads too. Cleans up clang warnings: warning: variable 'lpa' set but not used [-Wunused-but-set-variable] warning: variable 'adv' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: sfc: Make subdir logic consistent with other vendorsGeert Uytterhoeven2-2/+3
Both SFC and SFC_FALCON depend on NET_VENDOR_SOLARFLARE, hence use the latter to decide whether to descend into the sfc subdirectory. Move the rule to descend into sfc/falcon to the sfc subdirectory. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: Add missing VENDOR to Cadence and Packet Engines symbolsGeert Uytterhoeven3-8/+8
The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: Make NET_VENDOR_AURORA default to yesGeert Uytterhoeven1-0/+1
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel build. Hence NET_VENDOR_AURORA should default to yes, like other NET_VENDOR_* options. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qlogic: netxen: remove various redundant variablesColin Ian King2-11/+3
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05bnxt_en: Add bnxt_en initial params table and register it.Vasundhara Volam4-11/+147
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05mlx4: Add support for devlink reload and load driverinit valuesMoshe Shemesh3-3/+55
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05mlx4: Add mlx4 initial parameters table and register itMoshe Shemesh1-2/+106
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net/hamradio/6pack: remove redundant variable channelColin Ian King1-4/+1
Variable channel is being assigned but is never used hence it is redundant and can be removed. Cleans up two clang warnings: warning: variable 'channel' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05fjes: use currently unused variable my_epid and max_epidColin Ian King1-4/+4
Variables my_epid and max_epid are currently assigned and not being used - however, I suspect they were intended to be used in the for-loops to reduce the dereferencing of hw. Replace hw->my_epid and hw->max_epid with these variables. Cleans up clang warnings: warning: variable 'my_epid' set but not used [-Wunused-but-set-variable] variable 'max_epid' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: tehuti: remove redundant pointer skbColin Ian King1-2/+0
Pointer skb is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'skb' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: socionext: remove redundant pointer ndevColin Ian King1-2/+0
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: aquantia: Make some functions staticWei Yongjun1-3/+3
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:525:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:536:5: warning: symbol 'hw_atl_utils_mpi_set_state' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: dsa: vsc73xx: Make some functions staticWei Yongjun1-4/+5
Fixes the following sparse warnings: drivers/net/dsa/vitesse-vsc73xx.c:1054:6: warning: symbol 'vsc73xx_get_strings' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1113:5: warning: symbol 'vsc73xx_get_sset_count' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1122:6: warning: symbol 'vsc73xx_get_ethtool_stats' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: dsa: fix spelling mistake "waitting" -> "waiting"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_err error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05r8169: fix runtime suspendHeiner Kallweit1-8/+1
When runtime-suspending we configure WoL w/o touching saved_wolopts. If saved_wolopts == 0 we would power down the PHY in this case what's wrong. Therefore we have to check the actual chip WoL settings here. Fixes: 433f9d0ddcc6 ("r8169: improve saved_wolopts handling") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05cxgb4: Add support to read actual provisioned resourcesCasey Leedom4-35/+206
In highly constrained resources environments (like the 124VF T5 and 248VF T6 configurations), PF4 may not have very many resources at all and we need to adapt to whatever we've been allocated, this patch adds support to get the provisioned resources. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04epic100: remove redundant variable 'irq'Colin Ian King1-2/+0
Variable 'irq' is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'irq' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04sfc: remove redundant variable old_vlanColin Ian King1-2/+1
Variable old_vlan is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'old_vlan' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04qed: remove redundant pointer 'name'Colin Ian King1-2/+0
Pointer 'name' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'name' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04ethernet: micrel: remove redundant pointer 'info'Colin Ian King1-3/+0
Pointer 'info' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'info' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: hinic: remove redundant pointer pfhwdevColin Ian King1-3/+0
Pointer pfhwdev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'pfhwdev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: hns3: remove redundant variable 'protocol'Colin Ian King1-2/+0
Variable 'protocol' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'protocol' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 22:37:58 +0000