summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-22ppp: avoid loop in xmit recursion detection codeGuillaume Nault1-12/+14
We already detect situations where a PPP channel sends packets back to its upper PPP device. While this is enough to avoid deadlocking on xmit locks, this doesn't prevent packets from looping between the channel and the unit. The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq before checking for xmit recursion. Therefore, __ppp_xmit_process() might dequeue a packet from ppp->file.xq and send it on the channel which, in turn, loops it back on the unit. Then ppp_start_xmit() queues the packet back to ppp->file.xq and __ppp_xmit_process() picks it up and sends it again through the channel. Therefore, the packet will loop between __ppp_xmit_process() and ppp_start_xmit() until some other part of the xmit path drops it. For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops the packet after a few iterations. But PPTP reallocates the headroom if necessary, letting the loop run and exhaust the machine resources (as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109). Fix this by letting __ppp_xmit_process() enqueue the skb to ppp->file.xq, so that we can check for recursion before adding it to the queue. Now ppp_xmit_process() can drop the packet when recursion is detected. __ppp_channel_push() is a bit special. It calls __ppp_xmit_process() without having any actual packet to send. This is used by ppp_output_wakeup() to re-enable transmission on the parent unit (for implementations like ppp_async.c, where the .start_xmit() function might not consume the skb, leaving it in ppp->xmit_pending and disabling transmission). Therefore, __ppp_xmit_process() needs to handle the case where skb is NULL, dequeuing as many packets as possible from ppp->file.xq. Reported-by: xu heng <xuheng333@zoho.com> Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: driver version bumpIgor Russkikh1-1/+1
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Implement pci shutdown callbackIgor Russkikh3-0/+36
We should close link and all NIC operations during shutdown. On some systems graceful reboot never closes NIC interface on its own, but only indicates pci device shutdown. Without explicit handler, NIC rx rings continued to transfer DMA data into prepared buffers while CPU rebooted already. That caused memory corruptions on soft reboot. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Allow live mac address changesIgor Russkikh1-0/+2
There is nothing prevents us from changing MAC on the running interface. Allow this with ndev priv flag. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Add tx clean budget and valid budget handling logicIgor Russkikh4-9/+13
We should report to napi full budget only when we have more job to do. Before this fix, on any tx queue cleanup we forced napi to do poll again. Thats a waste of cpu resources and caused storming with napi polls when there was at least one tx on each interrupt. With this fix we report full budget only when there is more job on TX to do. Or, as before, when rx budget was fully consumed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Change inefficient wait loop on fw data readsIgor Russkikh2-15/+28
B1 hardware changes behavior of mailbox interface, it has busy bit always raised. Data ready condition should be detected by increment of address register. Old code has empty `for` loop, and that caused cpu overloads on B1 hardware. aq_nic_service_timer_cb consumed ~100ms because of that. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Fix a regression with reset on old firmwareIgor Russkikh1-0/+4
FW 1.5.58 and below needs a fixed delay even after 0x18 register is filled. Otherwise, setting MPI_INIT state too fast causes traffic hang. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Fix hardware reset when SPI may rarely hangupIgor Russkikh1-5/+15
Under some circumstances (notably using thunderbolt interface) SPI on chip reset may be in active transaction. Here we forcibly cleanup SPI to prevent possible hangups. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: on channel error, reject further cmd requestsJulian Wiedmann1-0/+1
When the IRQ handler determines that one of the cmd IO channels has failed and schedules recovery, block any further cmd requests from being submitted. The request would inevitably stall, and prevent the recovery from making progress until the request times out. This sort of error was observed after Live Guest Relocation, where the pending IO on the READ channel intentionally gets terminated to kick-start recovery. Simultaneously the guest executed SIOCETHTOOL, triggering qeth to issue a QUERY CARD INFO command. The command then stalled in the inoperabel WRITE channel. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: lock read device while queueing next bufferJulian Wiedmann1-3/+13
For calling ccw_device_start(), issue_next_read() needs to hold the device's ccwlock. This is satisfied for the IRQ handler path (where qeth_irq() gets called under the ccwlock), but we need explicit locking for the initial call by the MPC initialization. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: when thread completes, wake up all waitersJulian Wiedmann1-1/+1
qeth_wait_for_threads() is potentially called by multiple users, make sure to notify all of them after qeth_clear_thread_running_bit() adjusted the thread_running_mask. With no timeout, callers would otherwise stall. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: free netdevice when removing a cardJulian Wiedmann3-4/+2
On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows: qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev) Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all. Note that free_netdev() takes care of the netif_napi_del() for us too. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: micrel: Use the general dummy stubs for MMD register accessKevin Hao1-21/+2
The new general dummy stubs for MMD register access were introduced. Use that for the codes reuse. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211bKevin Hao1-0/+2
The Ethernet on mpc8315erdb is broken since commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). The reason is that even though the rtl8211b doesn't support the MMD extended registers access, it does return some random values if we trying to access the MMD register via indirect method. This makes it seem that the EEE is supported by this phy device. And the subsequent writing to the MMD registers does cause the phy malfunction. So use the dummy stubs for the MMD register access to fix this issue. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: Add general dummy stubs for MMD register accessKevin Hao1-0/+17
For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22drm: udl: Properly check framebuffer mmap offsetsGreg Kroah-Hartman1-2/+7
The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values. Reported-by: Eyal Itkin <eyalit@checkpoint.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
2018-03-22dmaengine: stm32-dmamux: fix a potential buffer overflowPierre-Yves MORDRET1-3/+6
The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-21Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"Alex Williamson1-3/+0
This reverts commit 2170dd04316e0754cbbfa4892a25aead39d225f7 The intent of commit 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") was to disallow the user from seeing that the device supports INTx if the platform is incapable of enabling it. The detection of this case however incorrectly includes devices which natively do not support INTx, such as SR-IOV VFs, and further discussions reveal gaps even for the target use case. Reported-by: Arjun Vynipadath <arjun@chelsio.com> Fixes: 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-22Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-36/+48
into drm-fixes A few more fixes for 4.16. Mostly for displays: - A fix for DP handling on radeon - Fix banding on eDP panels - Fix HBR audio - Fix for disabling VGA mode on Raven that leads to a corrupt or blank display on some platforms * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amd/display: Add one to EDID's audio channel count when passing to DC drm/amd/display: We shouldn't set format_default on plane as atomic driver drm/amd/display: Fix FMT truncation programming drm/amd/display: Allow truncation to 10 bits drm/amd/display: fix dereferencing possible ERR_PTR() drm/amd/display: Refine disable VGA drm/amdgpu: Use atomic function to disable crtcs with dc enabled drm/radeon: Don't turn off DP sink when disconnected
2018-03-21libnvdimm, nfit: fix persistence domain reportingDan Williams2-7/+13
The persistence domain is a point in the platform where once writes reach that destination the platform claims it will make them persistent relative to power loss. In the ACPI NFIT this is currently communicated as 2 bits in the "NFIT - Platform Capabilities Structure". The bits comprise a hierarchy, i.e. bit0 "CPU Cache Flush to NVDIMM Durability on Power Loss Capable" implies bit1 "Memory Controller Flush to NVDIMM Durability on Power Loss Capable". Commit 96c3a239054a "libnvdimm: expose platform persistence attr..." shows the persistence domain as flags, but it's really an enumerated hierarchy. Fix this newly introduced user ABI to show the closest available persistence domain before userspace develops dependencies on seeing, or needing to develop code to tolerate, the raw NFIT flags communicated through the libnvdimm-generic region attribute. Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21qede: fix spelling mistake: "registeration" -> "registration"Colin Ian King2-3/+3
Trivial fix to spelling mistakes in DP_ERR error message text and comments Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21bnx2x: fix spelling mistake: "registeration" -> "registration"Colin Ian King1-1/+1
Trivial fix to spelling mistake in BNX2X_ERR error message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21libnvdimm, region: hide persistence_domain when unknownDan Williams1-0/+7
Similar to other region attributes, do not emit the persistence_domain attribute if its contents are empty. Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...") Cc: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21drm/i915: Specify which engines to reset following semaphore/event lockupsChris Wilson1-2/+2
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk (cherry picked from commit ca98317b89428e6ac17be0938b467ed78654dd56) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-21ath9k_htc: use non-QoS NDP for AP probingJohannes Berg1-0/+1
When switching mac80211 to use QoS NDP, it turned out that ath9k_htc is somehow broken by this, e.g. see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060. Fix this by using the new mac80211 flag to go back to the old, incorrect, behaviour for this driver. Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") Reported-by: Ben Caradoc-Davies <ben@transient.nz> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-21mac80211_hwsim: Set wmediumd for new radiosAndrew Zaborowski1-0/+1
Set the wmediumd to the net's wmediumd when the radio gets created. Radios created after HWSIM_CMD_REGISTER don't currently get their data->wmediumd set and the userspace would need to reconnect to netlink to be able to call HWSIM_CMD_REGISTER again. Alternatively I think data->netgroup and data->wmedium could be replaced with a pointer to hwsim_net. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-21mmc: sdhci-acpi: Fix IRQ 0Adrian Hunter1-1/+1
Zero is a valid IRQ number and is being used on some CHT tablets. Stop treating it as an error. Reported-by: Luke Ross <luke@lukeross.name> Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq") Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-21drm/vmwgfx: Fix a destoy-while-held mutex problem.Thomas Hellstrom4-16/+34
When validating legacy surfaces, the backup bo might be destroyed at surface validate time. However, the kms resource validation code may have the bo reserved, so we will destroy a locked mutex. While there shouldn't be any other users of that mutex when it is destroyed, it causes a lock leak and thus throws a lockdep error. Fix this by having the kms resource validation code hold a reference to the bo while we have it reserved. We do this by introducing a validation context which might come in handy when the kms code is extended to validate multiple resources or buffers. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-21drm/vmwgfx: Fix black screen and device errors when running without fbdevThomas Hellstrom4-1/+25
When we are running without fbdev, transitioning from the login screen to X or gnome-shell/wayland will cause a vt switch and the driver will disable svga mode, losing all modesetting resources. However, the kms atomic state does not reflect that and may think that a crtc is still turned on, which will cause device errors when we try to bind an fb to the crtc, and the screen will remain black. Fix this by turning off all kms resources before disabling svga mode. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-21drm: Reject getfb for multi-plane framebuffersDaniel Stone1-0/+7
getfb can only return a single plane, so reject attempts to use it with multi-plane framebuffers. Signed-off-by: Daniel Stone <daniels@collabora.com> Reported-by: Daniel van Vugt <daniel.van.vugt@canonical.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 308e5bcbdb10 ("drm: add an fb creation ioctl that takes a pixel format v5") Cc: stable@vger.kernel.org # v3.3+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105518 Link: https://patchwork.freedesktop.org/patch/msgid/20180320225839.30905-1-daniels@collabora.com
2018-03-21mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0Jagdish Gediya1-5/+1
Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0Jagdish Gediya1-13/+10
Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nand: fsl_ifc: Fix nand waitfunc return valueJagdish Gediya1-2/+3
As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21drm/amd/display: Add one to EDID's audio channel count when passing to DCHarry Wentland1-1/+1
DC takes channel count to mean the actual count. cea_sad's channels represent it as number of channels - 1. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-21drm/amd/display: We shouldn't set format_default on plane as atomic driverHarry Wentland1-2/+0
This is still a leftover from early atomic brinup days. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-21drm/amd/display: Fix FMT truncation programmingMikita Lipski1-2/+2
Switch the order of parameters being set for depth and mode of truncation, as it previously was not correct Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/display: Allow truncation to 10 bitsMikita Lipski1-3/+2
The truncation isn't being programmed if the truncation depth is set to 2, it causes an issue with dce11.2 asic using 6bit eDP panel. It required to truncate 12:10 in order to perform spatial dither 10:6. This change will allow 12:10 truncation to be enabled. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21Merge tag 'drm/tegra/for-4.16-rc7-fixes' of ↵Dave Airlie4-7/+20
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.16-rc7 This contains two small fixes for the alpha blending support that was merged into v4.16-rc1 and a fix for connector reference leaks caused by the fact that display pipelines are no longer automatically disabled if the framebuffer is removed. Furthermore this contains a fix for a crash on IOMMU detach at driver unbind time and a regulator enable/disable unbalance fix. * tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Shutdown on driver unbind drm/tegra: dsi: Don't disable regulator on ->exit() drm/tegra: dc: Detach IOMMU group from domain only once drm/tegra: plane: Correct legacy blending drm/tegra: plane: Fix RGB565 format on older Tegra
2018-03-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds10-44/+81
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A late collection of fixes for regressions seen this release cycle. Normally I send this earlier than now but real life got in the way. Things are back to normal now. There's the normal set of SoC driver fixes: i.MX boot warning, TI display clks, allwinner clk ops being wrong (fun), driver probe badness on error paths, correctness fix for the new aspeed driver, and even a fix for a race condition in the bcm2835 clk driver. At the core framework level we also got some fixes for the clk phase API caching at the wrong time, better handling of the enabled state of orphan clks, and a fix for a newly introduced bug in how we handle rate calculations for pass-through clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: bcm2835: Protect sections updating shared registers clk: bcm2835: Fix ana->maskX definitions clk: aspeed: Prevent reset if clock is enabled clk: aspeed: Fix is_enabled for certain clocks clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe() clk: hisilicon: hi3660:Fix potential NULL dereference in hi3660_stub_clk_probe() clk: fix determine rate error with pass-through clock clk: migrate the count of orphaned clocks at init clk: update cached phase to respect the fact when setting phase clk: ti: am43xx: add set-rate-parent support for display clkctrl clock clk: ti: am33xx: add set-rate-parent support for display clkctrl clock clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53 clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
2018-03-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds10-47/+88
Pull rdma fixes from Jason Gunthorpe: "Not much exciting here, almost entirely syzkaller fixes. This is going to be on ongoing theme for some time, I think. Both Google and Mellanox are now running syzkaller on different parts of the user API. Summary: - Many bug fixes related to syzkaller from Leon Romanovsky. These are still for the mlx driver and ucma interface. - Fix a situation with port reuse for iWarp, discovered during scale-up testing - Bug fixes for the profile and restrack patches accepted during this merge window - Compile warning cleanups from Arnd, this is apparently the last warning to make 32 bit builds quiet" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/ucma: Ensure that CM_ID exists prior to access it RDMA/verbs: Remove restrack entry from XRCD structure RDMA/ucma: Fix use-after-free access in ucma_close RDMA/ucma: Check AF family prior resolving address infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks infiniband: qplib_fp: fix pointer cast IB/mlx5: Fix cleanup order on unload RDMA/ucma: Don't allow join attempts for unsupported AF family RDMA/ucma: Fix access to non-initialized CM_ID object RDMA/core: Do not use invalid destination in determining port reuse RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory IB/mlx5: Fix integer overflows in mlx5_ib_create_srq IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
2018-03-20Merge tag 'scsi-fixes' of ↵Linus Torvalds2-21/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - one driver patch (qla2xxx) which fixes a problem caused by an existing regression fix (FCP discovery is failing) - one generic fix to a longstanding bug in libsas that causes I/O eventually to hang to the device in the face of ATA error recovery. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery scsi: libsas: defer ata device eh commands to libata
2018-03-20RDMA/ucma: Ensure that CM_ID exists prior to access itLeon Romanovsky1-6/+9
Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-20Merge tag 'linux-can-fixes-for-4.16-20180319' of ↵David S. Miller1-3/+2
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-19 this is a pull reqeust of one patch for net/master. The patch is by Andri Yngvason and fixes a potential use-after-free bug in the cc770 driver introduced in the previous pull-request. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20net: gemini: fix memory leakIgor Pylypiv1-0/+1
cppcheck report: [drivers/net/ethernet/cortina/gemini.c:543]: (error) Memory leak: skb_tab Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20net: ethernet: arc: Fix a potential memory leak if an optional regulator is ↵Christophe JAILLET1-2/+4
deferred If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again. Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20vmxnet3: remove unused flag "rxcsum" from struct vmxnet3_adapterIgor Pylypiv1-2/+0
Signed-off-by: Igor Pylypiv <ipylypiv@silver-peak.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20Merge branch 'for-upstream' of ↵David S. Miller2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== Here are a few more important Bluetooth driver fixes for the 4.16 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET1-1/+2
If we can not get the HDMI DDC clock, we still need to free some resources before returning. Fixes: 939d749ad664 ("drm/sun4i: hdmi: Add support for controller hardware variants") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/5e0084af4ad57e9eea3bca5bd8e2e95970cd6714.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-20drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET1-1/+2
If we can not allocate the HDMI encoder regmap, we still need to free some resources before returning. Fixes: 4b1c924b1fc1 ("drm/sun4i: hdmi: create a regmap for later use") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/14c42391e1b562c7495bda6ad6fa1d24ec8dc052.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-19net: phy: relax error checking when creating sysfs link netdev->phydevGrygorii Strashko1-4/+11
Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per one netdevice, as result such drivers will produce warning during system boot and fail to connect second phy to netdevice when PHYLIB framework will try to create sysfs link netdev->phydev for second PHY in phy_attach_direct(), because sysfs link with the same name has been created already for the first PHY. As result, second CPSW external port will became unusable. Fix it by relaxing error checking when PHYLIB framework is creating sysfs link netdev->phydev in phy_attach_direct(), suppressing warning by using sysfs_create_link_nowarn() and adding error message instead. After this change links (phy->netdev and netdev->phy) creation failure is not fatal any more and system can continue working, which fixes TI CPSW issue. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>