summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18phy: phy-can-transceiver: Skip warning if no "max-bitrate"Geert Uytterhoeven1-2/+3
According to the DT bindings, the "max-bitrate" property is optional. However, when it is not present, a warning is printed. Fix this by adding a missing check for -EINVAL. Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: freescale: imx8m-pcie: Add one missing error returnRichard Zhu1-1/+1
There should be one error return when fail to fetch the perst reset. Add the missing error return. Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"Marijn Suijten1-13/+0
This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156. This commit introduced an init sequence from downstream DT [1] in the driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for this sequence: /* * The macro is used to define an initialization sequence. Each tuple * is meant to program 'value' into phy register at 'offset' with 'delay' * in us followed. */ Instead of corresponding to offsets into the phy register, the sequence read by the downstream driver [2] is passed into ulpi_write [3] which crafts the address-value pair into a new value and writes it into the same register at USB_ULPI_VIEWPORT [4]. In other words, this init sequence is programmed into the hardware in a totally different way than downstream and is unlikely to achieve the desired result, if the hsphy is working at all. An alternative method needs to be found to write these init values at the desired location. Fortunately mdm9607 did not land upstream yet [5] and should have its compatible revised to use the generic one, instead of a compatible that writes wrong data to the wrong registers. [1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585 [2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183 [3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468 [4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418 [5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/ Reported-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in ↵Shang XiaoJing1-1/+3
rockchip_usb2phy_power_on() The clk_disable_unprepare() should be called in the error handling of rockchip_usb2phy_power_on(). Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: renesas: r8a779f0-eth-serdes: Fix register settingYoshihiro Shimoda1-1/+1
Fix register setting which is typo in r8a779f0_eth_serdes_chan_setting(). Fixes: 742859441d44 ("phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221226064216.3895421-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()Shang XiaoJing1-0/+3
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-11phy: ti: fix Kconfig warning and operator precedenceRandy Dunlap1-2/+2
Fix Kconfig depends operator precedence to prevent a Kconfig warning: WARNING: unmet direct dependencies detected for MUX_MMIO Depends on [n]: MULTIPLEXER [=m] && OF [=n] Selected by [m]: - PHY_AM654_SERDES [=m] && (OF [=n] && ARCH_K3 || COMPILE_TEST [=y]) && COMMON_CLK [=y] Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-phy@lists.infradead.org Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230110062529.22668-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)44-66/+66
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-23Merge tag 'spi-fix-v6.2-rc1' of ↵Linus Torvalds1-3/+16
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One driver specific change here which handles the case where a SPI device for some reason tries to change the bus speed during a message on fsl_spi hardware, this should be very unusual" * tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl_spi: Don't change speed while chipselect is active
2022-12-23Merge tag 'regulator-fix-v6.2-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two core fixes here, one for a long standing race which some Qualcomm systems have started triggering with their UFS driver and another fixing a problem with supply lookup introduced by the fixes for devm related use after free issues that were introduced in this merge window" * tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: fix deadlock on regulator enable regulator: core: Fix resolve supply lookup issue
2022-12-23Merge tag 'hardening-v6.2-rc1-fixes' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening fixes from Kees Cook: - Fix CFI failure with KASAN (Sami Tolvanen) - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko) - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan Chancellor) - Ignore "contents" argument in LoadPin's LSM hook handling - Fix paste-o in /sys/kernel/warn_count API docs - Use READ_ONCE() consistently for oops/warn limit reading * tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: cfi: Fix CFI failure with KASAN exit: Use READ_ONCE() for all oops/warn limit reads security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 lkdtm: cfi: Make PAC test work with GCC 7 and 8 docs: Fix path paste-o for /sys/kernel/warn_count LoadPin: Ignore the "contents" argument of the LSM hooks
2022-12-23Merge tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds47-372/+647
Pull drm fixes from Dave Airlie: "Holiday fixes! Two batches from amd, and one group of i915 changes. amdgpu: - Spelling fix - BO pin fix - Properly handle polaris 10/11 overlap asics - GMC9 fix - SR-IOV suspend fix - DCN 3.1.4 fix - KFD userptr locking fix - SMU13.x fixes - GDS/GWS/OA handling fix - Reserved VMID handling fixes - FRU EEPROM fix - BO validation fixes - Avoid large variable on the stack - S0ix fixes - SMU 13.x fixes - VCN fix - Add missing fence reference amdkfd: - Fix init vm error handling - Fix double release of compute pasid i915 - Documentation fixes - OA-perf related fix - VLV/CHV HDMI/DP audio fix - Display DDI/Transcoder fix - Migrate fixes" * tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependency drm/amdgpu: enable VCN DPG for GC IP v11.0.4 drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0 drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34 drm/amdgpu: skip MES for S0ix as well since it's part of GFX drm/amd/pm: avoid large variable on kernel stack drm/amdkfd: Fix double release compute pasid drm/amdkfd: Fix kfd_process_device_init_vm error handling drm/amd/pm: update SMU13.0.0 reported maximum shader clock drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings drm/amd/pm: enable GPO dynamic control support for SMU13.0.7 drm/amd/pm: enable GPO dynamic control support for SMU13.0.0 drm/amdgpu: revert "generally allow over-commit during BO allocation" drm/amdgpu: Remove unnecessary domain argument drm/amdgpu: Fix size validation for non-exclusive domains (v4) drm/amdgpu: Check if fru_addr is not NULL (v2) drm/i915/ttm: consider CCS for backup objects drm/i915/migrate: fix corner case in CCS aux copying drm/amdgpu: rework reserved VMID handling ...
2022-12-22Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds8-10/+168
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and small updates. The only things of note is a qla2xxx fix for crash on hotplug and timeout and the addition of a user exposed abstraction layer for persistent reservation error return handling (which necessitates the conversion of nvme.c as well as SCSI)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix crash when I/O abort times out nvme: Convert NVMe errors to PR errors scsi: sd: Convert SCSI errors to PR errors scsi: core: Rename status_byte to sg_status_byte block: Add error codes for common PR failures scsi: sd: sd_zbc: Trace zone append emulation scsi: libfc: Include the correct header
2022-12-21Merge tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linuxLinus Torvalds1-16/+12
Pull block fixes from Jens Axboe: - Various fixes for BFQ (Yu, Yuwei) - Fix for loop command line parsing (Isaac) - No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade anymore (me) - blk-iocost enum fix for newer gcc (Jiri) - UAF fix for queue release (Ming) - blk-iolatency error handling memory leak fix (Tejun) * tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux: block: don't clear REQ_ALLOC_CACHE for non-polled requests block: fix use-after-free of q->q_usage_counter block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED blk-iolatency: Fix memory leak on add_disk() failures loop: Fix the max_loop commandline argument treatment when it is set to 0 block/blk-iocost (gcc13): keep large values in a new enum block, bfq: replace 0/1 with false/true in bic apis block, bfq: don't return bfqg from __bfq_bic_change_cgroup() block, bfq: fix possible uaf for 'bfqq->bic'
2022-12-21drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependencyChristian König1-0/+2
That function consumes the reference. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reported-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aab9cf7b6954 ("drm/amdgpu: use scheduler dependencies for VM updates") Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-21drm/amdgpu: enable VCN DPG for GC IP v11.0.4Saleemkhan Jamadar1-0/+1
Enable VCN Dynamic Power Gating control for GC IP v11.0.4. Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1
2022-12-21Merge tag 'for-linus-2022122101' of ↵Linus Torvalds13-7/+58
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - Four potential NULL pointers dereferences (Bastien Nocera, Enrik Berkhan, Jiasheng Jiang and Roderick Colenbrander) - Allow Wacom devices in bootloader mode to be flashed (Jason Gerecke) - Some assorted devices quirks (José Expósito and Terry Junge) * tag 'for-linus-2022122101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: sony: Fix unused function warning HID: plantronics: Additional PIDs for double volume key presses quirk HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint HID: Ignore HP Envy x360 eu0009nv stylus battery HID: wacom: Ensure bootloader PID is usable in hidraw mode HID: amd_sfh: Add missing check for dma_alloc_coherent HID: playstation: fix free of uninialized pointer for DS4 in Bluetooth. HID: mcp2221: don't connect hidraw HID: logitech-hidpp: Guard FF init code against non-USB devices
2022-12-21Merge tag 'media/v6.2-2' of ↵Linus Torvalds8-16/+17
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - A regression at V4L2 core breaking string controls - Build warning fixes on sun6i drivers when building with clang * tag 'media/v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: sun6i-isp: params: Unregister pending buffer on cleanup media: sun6i-isp: params: Fix incorrect indentation media: sun6i-isp: capture: Fix uninitialized variable use media: sun6i-isp: proc: Declare subdev ops as static media: sun6i-isp: proc: Error out on invalid port to fix warning media: sun6i-isp: proc: Fix return code handling in stream off path media: sun8i-a83t-mipi-csi2: Clarify return code handling in stream off path media: sun6i-mipi-csi2: Clarify return code handling in stream off path media: sun6i-csi: capture: Remove useless ret initialization media: sun6i-csi: bridge: Error out on invalid port to fix warning media: v4l2-ctrls-api.c: add back dropped ctrl->is_new = 1
2022-12-21Merge tag 'pwm/for-6.2-rc1' of ↵Linus Torvalds38-217/+285
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various changes across the board, mostly improvements and cleanups" * tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits) pwm: pca9685: Convert to i2c's .probe_new() pwm: sun4i: Propagate errors in .get_state() to the caller pwm: Handle .get_state() failures pwm: sprd: Propagate errors in .get_state() to the caller pwm: rockchip: Propagate errors in .get_state() to the caller pwm: mtk-disp: Propagate errors in .get_state() to the caller pwm: imx27: Propagate errors in .get_state() to the caller pwm: cros-ec: Propagate errors in .get_state() to the caller pwm: crc: Propagate errors in .get_state() to the caller leds: qcom-lpg: Propagate errors in .get_state() to the caller drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller pwm/tracing: Also record trace events for failed API calls pwm: Make .get_state() callback return an error code pwm: pxa: Enable for MMP platform pwm: pxa: Add reference manual link and limitations pwm: pxa: Use abrupt shutdown mode pwm: pxa: Remove clk enable/disable from pxa_pwm_config pwm: pxa: Set duty cycle to 0 when disabling PWM pwm: pxa: Remove pxa_pwm_enable/disable pwm: mediatek: Add support for MT7986 ...
2022-12-21Merge tag 'rproc-v6.2' of ↵Linus Torvalds10-20/+1510
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled" * tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits) remoteproc: core: Do pm_relax when in RPROC_OFFLINE state remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() remoteproc: qcom_q6v5_pas: detach power domains on remove remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() remoteproc: sysmon: Make QMI message rules const drivers: remoteproc: Add Xilinx r5 remoteproc driver firmware: xilinx: Add RPU configuration APIs firmware: xilinx: Add shutdown/wakeup APIs firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. arm64: dts: xilinx: zynqmp: Add RPU subsystem device node dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings remoteproc: core: Use device_match_of_node() remoteproc: imx_rproc: Correct i.MX93 DRAM mapping remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP remoteproc: imx_rproc: Request mbox channel later remoteproc: imx_rproc: Support i.MX8QM remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP ...
2022-12-21Merge tag 'mailbox-v6.2' of ↵Linus Torvalds7-57/+118
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: enable sc8280xp, sm8550 and sm4250 support - ti: default to ARCH_K3 for msg manager - mediatek: - add mt8188 and mt8186 support - request irq only after got ready - zynq-ipi: fix error handling after device_register - mpfs: check sys-con status - rockchip: simplify by using device_get_match_data * tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550 mailbox: mtk-cmdq: Do not request irq until we are ready mailbox: zynq-ipi: fix error handling while device_register() fails mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying mailbox: arm_mhuv2: Fix return value check in mhuv2_probe() dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name dt-bindings: mailbox: add GCE header file for mt8188 mailbox: mpfs: read the system controller's status mailbox: mtk-cmdq: add MT8186 support mailbox: mtk-cmdq: add gce ddr enable support flow mailbox: mtk-cmdq: add gce software ddr enable private data mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number mailbox: rockchip: Use device_get_match_data() to simplify the code dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
2022-12-21Merge tag 'backlight-next-6.2' of ↵Linus Torvalds9-25/+21
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight update from Lee Jones: "Convert a bunch of I2C class drivers over to .probe_new()" * tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa: Convert to i2c's .probe_new() backlight: lv5207lp: Convert to i2c's .probe_new() backlight: lp855x: Convert to i2c's .probe_new() backlight: lm3639: Convert to i2c's .probe_new() backlight: lm3630a: Convert to i2c's .probe_new() backlight: bd6107: Convert to i2c's .probe_new() backlight: arcxcnn: Convert to i2c's .probe_new() backlight: adp8870: Convert to i2c's .probe_new() backlight: adp8860: Convert to i2c's .probe_new()
2022-12-21Merge tag 'mfd-next-6.2' of ↵Linus Torvalds120-2191/+985
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Ampere Computing SMpro - Add support for TI TPS65219 PMIC New Functionality: - Add support for multiple devices of the same type; rk808 Fix-ups: - Convert a bunch of I2C class drivers over to .probe_new() - Remove superfluous includes; mc13xxx-*, palmas, timberdale - Use correct includes for GPIO handling; madera-core - Convert to GPIOD; twl6040 - Remove unused platform data handling; twl6040 - Device Tree changes; many - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld - Add support for modules; palmas - Enable COMPILE_TEST support; intel_soc_pmic* - Trivial: spelling / whitespace fixes; mc13xxx-spi - Replace old PM helpers with new ones; many - Convert deprecated mask_invert usage to unmask_base; many - Use devm_*() calls; qcom_rpm - MAINTAINER fix-ups - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc, stm32-lptimer, qcom_rpm, rohm-* Bug Fixes: - Add bounds / error checking; mt6360-core - No sleeping inside critical sections; axp20x - Fix missing dependencies; ROHM_BD957XMUF - Repair error paths; qcom-pm8008" * tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits) dt-bindings: mfd: da9062: Correct file name for watchdog mfd: pm8008: Fix return value check in pm8008_probe() mfd: rohm: Use dev_err_probe() mfd: Drop obsolete dependencies on COMPILE_TEST dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource() mfd: rohm-bd9576: Convert to i2c's .probe_new() mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource() dt-bindings: Fix maintainer email for a few ROHM ICs mfd: palmas: Use device_get_match_data() to simplify the code Input: Add tps65219 interrupt driven powerbutton mfd: tps65219: Add driver for TI TPS65219 PMIC mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ mfd: wcd934x: Convert irq chip to config regs mfd: tps65090: Replace irqchip mask_invert with unmask_base mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base mfd: stpmic1: Fix swapped mask/unmask in irq chip mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base ...
2022-12-21Merge tag 'net-6.2-rc1' of ↵Linus Torvalds32-138/+339
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter and can. Current release - regressions: - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func - rxrpc: - fix security setting propagation - fix null-deref in rxrpc_unuse_local() - fix switched parameters in peer tracing Current release - new code bugs: - rxrpc: - fix I/O thread startup getting skipped - fix locking issues in rxrpc_put_peer_locked() - fix I/O thread stop - fix uninitialised variable in rxperf server - fix the return value of rxrpc_new_incoming_call() - microchip: vcap: fix initialization of value and mask - nfp: fix unaligned io read of capabilities word Previous releases - regressions: - stop in-kernel socket users from corrupting socket's task_frag - stream: purge sk_error_queue in sk_stream_kill_queues() - openvswitch: fix flow lookup to use unmasked key - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port() - devlink: - hold region lock when flushing snapshots - protect devlink dump by the instance lock Previous releases - always broken: - bpf: - prevent leak of lsm program after failed attach - resolve fext program type when checking map compatibility - skbuff: account for tail adjustment during pull operations - macsec: fix net device access prior to holding a lock - bonding: switch back when high prio link up - netfilter: flowtable: really fix NAT IPv6 offload - enetc: avoid buffer leaks on xdp_do_redirect() failure - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg() - dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq" * tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) net: fec: check the return value of build_skb() net: simplify sk_page_frag Treewide: Stop corrupting socket's task_frag net: Introduce sk_use_task_frag in struct sock. mctp: Remove device type check at unregister net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len can: flexcan: avoid unbalanced pm_runtime_enable warning Documentation: devlink: add missing toc entry for etas_es58x devlink doc mctp: serial: Fix starting value for frame check sequence nfp: fix unaligned io read of capabilities word net: stream: purge sk_error_queue in sk_stream_kill_queues() myri10ge: Fix an error handling path in myri10ge_probe() net: microchip: vcap: Fix initialization of value and mask rxrpc: Fix the return value of rxrpc_new_incoming_call() rxrpc: rxperf: Fix uninitialised variable rxrpc: Fix I/O thread stop rxrpc: Fix switched parameters in peer tracing rxrpc: Fix locking issues in rxrpc_put_peer_locked() rxrpc: Fix I/O thread startup getting skipped ...
2022-12-21Merge tag 'random-6.2-rc1-for-linus' of ↵Linus Torvalds4-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "Two remaining changes that are now possible after you merged a few other trees: - #include <asm/archrandom.h> can be removed from random.h now, making the direct use of the arch_random_* API more of a private implementation detail between the archs and random.c, rather than something for general consumers. - Two additional uses of prandom_u32_max() snuck in during the initial phase of pulls, so these have been converted to get_random_u32_below(), and now the deprecated prandom_u32_max() alias -- which was just a wrapper around get_random_u32_below() -- can be removed. In addition, there is one fix: - Check efi_rt_services_supported() before attempting to use an EFI runtime function. This affected EFI systems that disable runtime services yet still boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as well systems where EFI runtime services have been forcibly disabled, such as on PREEMPT_RT. On those machines, a very early and hard to diagnose crash would happen, preventing boot" * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove prandom_u32_max() efi: random: fix NULL-deref when refreshing seed random: do not include <asm/archrandom.h> from random.h
2022-12-20net: fec: check the return value of build_skb()Wei Fang1-0/+8
The build_skb might return a null pointer but there is no check on the return value in the fec_enet_rx_queue(). So a null pointer dereference might occur. To avoid this, we check the return value of build_skb. If the return value is a null pointer, the driver will recycle the page and update the statistic of ndev. Then jump to rx_processing_done to clear the status flags of the BD so that the hardware can recycle the BD. Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-20drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0Tim Huang1-1/+2
MES is part of gfxoff and MES suspend and resume are skipped for S0i3. But the mes_self_test call path is still in the amdgpu_device_ip_late_init. it's should also be skipped for s0ix as no hardware re-initialization happened. Besides, mes_self_test will free the BO that triggers a lot of warning messages while in the suspend state. [ 81.656085] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:425 amdgpu_bo_free_kernel+0xfc/0x110 [amdgpu] [ 81.679435] Call Trace: [ 81.679726] <TASK> [ 81.679981] amdgpu_mes_remove_hw_queue+0x17a/0x230 [amdgpu] [ 81.680857] amdgpu_mes_self_test+0x390/0x430 [amdgpu] [ 81.681665] mes_v11_0_late_init+0x37/0x50 [amdgpu] [ 81.682423] amdgpu_device_ip_late_init+0x53/0x280 [amdgpu] [ 81.683257] amdgpu_device_resume+0xae/0x2a0 [amdgpu] [ 81.684043] amdgpu_pmops_resume+0x37/0x70 [amdgpu] [ 81.684818] pci_pm_resume+0x5c/0xa0 [ 81.685247] ? pci_pm_thaw+0x90/0x90 [ 81.685658] dpm_run_callback+0x4e/0x160 [ 81.686110] device_resume+0xad/0x210 [ 81.686529] async_resume+0x1e/0x40 [ 81.686931] async_run_entry_fn+0x33/0x120 [ 81.687405] process_one_work+0x21d/0x3f0 [ 81.687869] worker_thread+0x4a/0x3c0 [ 81.688293] ? process_one_work+0x3f0/0x3f0 [ 81.688777] kthread+0xff/0x130 [ 81.689157] ? kthread_complete_and_exit+0x20/0x20 [ 81.689707] ret_from_fork+0x22/0x30 [ 81.690118] </TASK> [ 81.690380] ---[ end trace 0000000000000000 ]--- v2: make the comment clean and use adev->in_s0ix instead of adev->suspend Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1
2022-12-20drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asicsEvan Quan2-6/+28
For SMU 13.0.0 and 13.0.7, the output from PMFW is in percent. Driver need to convert that into correct PMW(255) based. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1
2022-12-20drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34Evan Quan3-1/+4
To fit the latest PMFW and suppress the warning emerged on driver loading. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1
2022-12-20drm/amdgpu: skip MES for S0ix as well since it's part of GFXAlex Deucher1-2/+3
It's also part of gfxoff. Cc: stable@vger.kernel.org # 6.0, 6.1 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-20drm/amd/pm: avoid large variable on kernel stackArnd Bergmann1-5/+16
The activity_monitor_external[] array is too big to fit on the kernel stack, resulting in this warning with clang: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_7_ppt.c:1438:12: error: stack frame size (1040) exceeds limit (1024) in 'smu_v13_0_7_get_power_profile_mode' [-Werror,-Wframe-larger-than] Use dynamic allocation instead. It should also be possible to have single element here instead of the array, but this seems easier. v2: fix up argument to sizeof() (Alex) Fixes: 334682ae8151 ("drm/amd/pm: enable workload type change on smu_v13_0_7") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-20drm/amdkfd: Fix double release compute pasidPhilip Yang3-15/+40
If kfd_process_device_init_vm returns failure after vm is converted to compute vm and vm->pasid set to compute pasid, KFD will not take pdd->drm_file reference. As a result, drm close file handler maybe called to release the compute pasid before KFD process destroy worker to release the same pasid and set vm->pasid to zero, this generates below WARNING backtrace and NULL pointer access. Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step of kfd_process_device_init_vm, to ensure vm pasid is the original pasid if acquiring vm failed or is the compute pasid with pdd->drm_file reference taken to avoid double release same pasid. amdgpu: Failed to create process VM object ida_free called for id=32770 which is not allocated. WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140 RIP: 0010:ida_free+0x96/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:ida_free+0x76/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-20drm/amdkfd: Fix kfd_process_device_init_vm error handlingPhilip Yang1-6/+6
Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-20Merge tag 'devicetree-for-6.2-2' of ↵Linus Torvalds1-20/+20
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: "This is mostly a treewide clean-up from Krzysztof. There's also a couple of fixes and things that fell thru the cracks. I must say this has been a nice merge window without bindings dumped in at the last minute introducing warnings. Summary: - Treewide dropping of redundant 'binding' or 'schema' from schema titles. This will be followed up with a automated check to catch these. - Re-sort vendor-prefies - Convert GPIO based watchdog to schema - Handle all the variations for clocks, resets, power domains in i.MX PCIe binding - Document missing 'power-domains' property in mxsfb - Fix error with path references in Tegra XUSB example - Honor CONFIG_CMDLINE* even without /chosen node" * tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: drop redundant part of title (manual) dt-bindings: clock: drop redundant part of title dt-bindings: drop redundant part of title (beginning) dt-bindings: drop redundant part of title (end, part three) dt-bindings: drop redundant part of title (end, part two) dt-bindings: drop redundant part of title (end) dt-bindings: clock: st,stm32mp1-rcc: add proper title dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title dt-bindings: drop redundant part of title of shared bindings dt-bindings: watchdog: gpio: Convert bindings to YAML dt-bindings: imx6q-pcie: Handle more resets on legacy platforms dt-bindings: imx6q-pcie: Handle various PD configurations dt-bindings: imx6q-pcie: Handle various clock configurations dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property dt-bindings: vendor-prefixes: sort entries alphabetically dt-bindings: usb: tegra-xusb: Remove path references of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
2022-12-20Merge tag 'parisc-for-6.2-1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "There is one noteable patch, which allows the parisc kernel to use the same MADV_xxx constants as the other architectures going forward. With that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on others) which is different. To prevent an ABI breakage, a wrapper is included which translates old MADV values to the new ones, so existing userspace isn't affected. Reason for that patch is, that some applications wrongly used the standard MADV_xxx values even on some non-x86 platforms and as such those programs failed to run correctly on parisc (examples are qemu-user, tor browser and boringssl). Then the kgdb console and the LED code received some fixes, and some 0-day warnings are now gone. Finally, the very last compile warning which was visible during a kernel build is now fixed too (in the vDSO code). The majority of the patches are tagged for stable series and in summary this patchset is quite small and drops more code than it adds: Fixes: - Fix potential null-ptr-deref in start_task() - Fix kgdb console on serial port - Add missing FORCE prerequisites in Makefile - Drop PMD_SHIFT from calculation in pgtable.h Enhancements: - Implement a wrapper to align madvise() MADV_* constants with other architectures - If machine supports running MPE/XL, show the MPE model string Cleanups: - Drop duplicate kgdb console code - Indenting fixes in setup_cmdline()" * tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Show MPE/iX model string at bootup parisc: Add missing FORCE prerequisites in Makefile parisc: Move pdc_result struct to firmware.c parisc: Drop locking in pdc console code parisc: Drop duplicate kgdb_pdc console parisc: Fix locking in pdc_iodc_print() firmware call parisc: Drop PMD_SHIFT from calculation in pgtable.h parisc: Align parisc MADV_XXX constants with all other architectures parisc: led: Fix potential null-ptr-deref in start_task() parisc: Fix inconsistent indenting in setup_cmdline()
2022-12-20HID: sony: Fix unused function warningJosé Expósito1-0/+2
Compiling this driver without setting "CONFIG_SONY_FF" generates the following warning: drivers/hid/hid-sony.c:2358:20: warning: unused function 'sony_send_output_report' [-Wunused-function] static inline void sony_send_output_report(struct sony_sc *sc) ^ 1 warning generated. Add the missing preprocessor check to fix it. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: plantronics: Additional PIDs for double volume key presses quirkTerry Junge2-0/+12
I no longer work for Plantronics (aka Poly, aka HP) and do not have access to the headsets in order to test. However, as noted by Maxim, the other 32xx models that share the same base code set as the 3220 would need the same quirk. This patch adds the PIDs for the rest of the Blackwire 32XX product family that require the quirk. Plantronics Blackwire 3210 Series (047f:c055) Plantronics Blackwire 3215 Series (047f:c057) Plantronics Blackwire 3225 Series (047f:c058) Quote from previous patch by Maxim Mikityanskiy Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. End quote Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpointJosé Expósito1-0/+4
The HID descriptor of this device contains two mouse collections, one for mouse emulation and the other for the trackpoint. Both collections get merged and, because the first one defines X and Y, the movemenent events reported by the trackpoint collection are ignored. Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able to receive its reports. This fix is similar to/based on commit 40d5bb87377a ("HID: multitouch: enable multi-input as a quirk for some devices"). Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825 Reported-by: Akito <the@akito.ooo> Tested-by: Akito <the@akito.ooo> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: Ignore HP Envy x360 eu0009nv stylus batteryJosé Expósito2-0/+3
Battery status is reported for the HP Envy x360 eu0009nv stylus even though it does not have battery. Prevent it from always reporting the battery as low (1%). Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823 Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com> Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: wacom: Ensure bootloader PID is usable in hidraw modeJason Gerecke3-0/+13
Some Wacom devices have a special "bootloader" mode that is used for firmware flashing. When operating in this mode, the device cannot be used for input, and the HID descriptor is not able to be processed by the driver. The driver generates an "Unknown device_type" warning and then returns an error code from wacom_probe(). This is a problem because userspace still needs to be able to interact with the device via hidraw to perform the firmware flash. This commit adds a non-generic device definition for 056a:0094 which is used when devices are in "bootloader" mode. It marks the devices with a special BOOTLOADER type that is recognized by wacom_probe() and wacom_raw_event(). When we see this type we ensure a hidraw device is created and otherwise keep our hands off so that userspace is in full control. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: amd_sfh: Add missing check for dma_alloc_coherentJiasheng Jiang1-0/+4
Add check for the return value of the dma_alloc_coherent since it may return NULL pointer if allocation fails. Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20221220024921.21992-1-jiasheng@iscas.ac.cn
2022-12-20Merge tag 'drm-intel-next-fixes-2022-12-15' of ↵Dave Airlie10-88/+96
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Documentation fixe (Matt, Miaoqian) - OA-perf related fix (Umesh) - VLV/CHV HDMI/DP audio fix (Ville) - Display DDI/Transcoder fix (Khaled) - Migrate fixes (Chris, Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y5uFYOJ/1jgf2eSE@intel.com
2022-12-20efi: random: fix NULL-deref when refreshing seedJohan Hovold1-1/+3
Do not try to refresh the RNG seed in case the firmware does not support setting variables. This is specifically needed to prevent a NULL-pointer dereference on the Lenovo X13s with some firmware revisions, or more generally, whenever the runtime services have been disabled (e.g. efi=noruntime or with PREEMPT_RT). Fixes: e7b813b32a42 ("efi: random: refresh non-volatile random seed when RNG is initialized") Reported-by: Steev Klimaszewski <steev@kali.org> Reported-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-20random: do not include <asm/archrandom.h> from random.hJason A. Donenfeld3-0/+3
The <asm/archrandom.h> header is a random.c private detail, not something to be called by other code. As such, don't make it automatically available by way of random.h. Cc: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-19Merge tag 'linux-can-fixes-for-6.2-20221219' of ↵Jakub Kicinski2-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-12-19 The first patch is by Vincent Mailhol and adds the etas_es58x devlink documentation to the index. Haibo Chen's patch for the flexcan driver fixes a unbalanced pm_runtime_enable warning. The last patch is by me, targets the kvaser_usb driver and fixes an error occurring with gcc-13. * tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len can: flexcan: avoid unbalanced pm_runtime_enable warning Documentation: devlink: add missing toc entry for etas_es58x devlink doc ==================== Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-19Treewide: Stop corrupting socket's task_fragBenjamin Coddington5-0/+7
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the GFP_NOIO flag on sk_allocation which the networking system uses to decide when it is safe to use current->task_frag. The results of this are unexpected corruption in task_frag when SUNRPC is involved in memory reclaim. The corruption can be seen in crashes, but the root cause is often difficult to ascertain as a crashing machine's stack trace will have no evidence of being near NFS or SUNRPC code. I believe this problem to be much more pervasive than reports to the community may indicate. Fix this by having kernel users of sockets that may corrupt task_frag due to reclaim set sk_use_task_frag = false. Preemptively correcting this situation for users that still set sk_allocation allows them to convert to memalloc_nofs_save/restore without the same unexpected corruptions that are sure to follow, unlikely to show up in testing, and difficult to bisect. CC: Philipp Reisner <philipp.reisner@linbit.com> CC: Lars Ellenberg <lars.ellenberg@linbit.com> CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> CC: Jens Axboe <axboe@kernel.dk> CC: Josef Bacik <josef@toxicpanda.com> CC: Keith Busch <kbusch@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Sagi Grimberg <sagi@grimberg.me> CC: Lee Duncan <lduncan@suse.com> CC: Chris Leech <cleech@redhat.com> CC: Mike Christie <michael.christie@oracle.com> CC: "James E.J. Bottomley" <jejb@linux.ibm.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Valentina Manea <valentina.manea.m@gmail.com> CC: Shuah Khan <shuah@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: David Howells <dhowells@redhat.com> CC: Marc Dionne <marc.dionne@auristor.com> CC: Steve French <sfrench@samba.org> CC: Christine Caulfield <ccaulfie@redhat.com> CC: David Teigland <teigland@redhat.com> CC: Mark Fasheh <mark@fasheh.com> CC: Joel Becker <jlbec@evilplan.org> CC: Joseph Qi <joseph.qi@linux.alibaba.com> CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Latchesar Ionkov <lucho@ionkov.net> CC: Dominique Martinet <asmadeus@codewreck.org> CC: Ilya Dryomov <idryomov@gmail.com> CC: Xiubo Li <xiubli@redhat.com> CC: Chuck Lever <chuck.lever@oracle.com> CC: Jeff Layton <jlayton@kernel.org> CC: Trond Myklebust <trond.myklebust@hammerspace.com> CC: Anna Schumaker <anna@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-19net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irqArun Ramadoss1-2/+1
KSZ swithes used interrupts for detecting the phy link up and down. During registering the interrupt handler, it used IRQF_TRIGGER_FALLING flag. But this flag has to be retrieved from device tree instead of hard coding in the driver, so removing the flag. Fixes: ff319a644829 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common") Reported-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-19Merge tag 'soc-fixes-6.2-1' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a couple of build fixes from randconfig testing, plus a set of Mediatek SoC specific fixes, all trivial" * tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: tegra: fix CPU_BIG_ENDIAN dependencies ARM: disallow pre-ARMv5 builds with ld.lld ARM: pxa: fix building with clang MAINTAINERS: add related dts to IXP4xx ARM: dts: spear: drop 0x from unit address arm64: dts: mt8183: Fix Mali GPU clock arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon soc: mediatek: pm-domains: Fix the power glitch issue
2022-12-19Merge tag 'kbuild-v6.2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support zstd-compressed debug info - Allow W=1 builds to detect objects shared among multiple modules - Add srcrpm-pkg target to generate a source RPM package - Make the -s option detection work for future GNU Make versions - Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y - Allow W=1 builds to detect -Wundef warnings in any preprocessed files - Raise the minimum supported version of binutils to 2.25 - Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used - Use $(file ...) to read a file if GNU Make >= 4.2 is used - Print error if GNU Make older than 3.82 is used - Allow modpost to detect section mismatches with Clang LTO - Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y * tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) buildtar: fix tarballs with EFI_ZBOOT enabled modpost: Include '.text.*' in TEXT_SECTIONS padata: Mark padata_work_init() as __ref kbuild: ensure Make >= 3.82 is used kbuild: refactor the prerequisites of the modpost rule kbuild: change module.order to list *.o instead of *.ko kbuild: use .NOTINTERMEDIATE for future GNU Make versions kconfig: refactor Makefile to reduce process forks kbuild: add read-file macro kbuild: do not sort after reading modules.order kbuild: add test-{ge,gt,le,lt} macros Documentation: raise minimum supported version of binutils to 2.25 kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS kbuild: Port silent mode detection to future gnu make. init/version.c: remove #include <generated/utsrelease.h> firmware_loader: remove #include <generated/utsrelease.h> modpost: Mark uuid_le type to be suitable only for MEI kbuild: add ability to make source rpm buildable using koji kbuild: warn objects shared among multiple modules ...
2022-12-19Merge tag 'v6.1-soc-fixes' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes PM domains: enable isolation before resetting power * tag 'v6.1-soc-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: pm-domains: Fix the power glitch issue Link: https://lore.kernel.org/r/29c8b913-53cf-096f-fe44-832ceaeac116@suse.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 13:09:54 +0000