summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-06-29mmc: dw_mmc: change the array of slotsJaehoon Chung2-15/+10
It doesn't need to use the array of slots anymore. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-29mmc: dw_mmc: remove the loop about finding slotsJaehoon Chung1-79/+36
dwmmc controller has used the only one slot. It doesn't need to check the other slots. Remove the loop about finding slots. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-29mmc: dw_mmc: deprecated the "num-slots" propertyJaehoon Chung1-13/+8
dwmmc controller is supporting only one slot per a IP. Even though DWMMC IP is provided the multiple slot, but there is no usage in real world. In mmc subsystem, not allow the multiple slot concept. Then "num-slots" property is deprecated. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.comi> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-29mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DTShawn Lin1-18/+30
Currently we unconditionally do tuning for each degree, which costs 900ms for each boot and resume. May someone argue that this is a question of accuracy VS time. But I would say it's a trick of how we need to do decision for our boards. If we don't care the time we spend at all, we could definitely do tuning for each degree. But when we need to improve the user experience, for instance, speed up resuming from S3, we should also have the right to do that. This patch add parsing "rockchip,desired-num-phases", for folks to specify the number of doing tuning. If not specified, 360 will be used as before. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: renesas-sdhi: improve checkpatch cleannessSimon Horman3-33/+37
Trivial updates to improve checkpatch cleanness. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: improve checkpatch cleannessSimon Horman4-43/+50
Trivial updates to improve checkpatch cleanness. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllersAdrian Hunter1-1/+1
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: slot-gpio: Add support to enable irq wake on cd_irqAdrian Hunter2-1/+6
Add host capability MMC_CAP_CD_WAKE to enable irq wake on the card detect irq. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: Remove MMC_CAP2_HC_ERASE_SZUlf Hansson4-13/+3
The MMC_CAP2_HC_ERASE_SZ is used only by a few mmc host drivers. Its intent is to enable eMMC's high-capacity erase size, as to improve the behaviour of the erase operations. We should strive to avoid software configuration options that aren't necessary, but instead deploy common behaviours. For these reasons, let's remove the capability bit for MMC_CAP2_HC_ERASE_SZ and make it the default behaviour. Note that this change doesn't affect eMMCs supporting trim/discard, because these commands operates on sectors and takes precedence over erase commands. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: for data errors, take response of stop cmd into accountWolfram Sang1-2/+3
Some errors are flagged only with the next command after a multiblock transfer, e.g. ECC error. So, when checking for data transfer errors, we check the result from the stop command as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: check also R1 response for stop commandsWolfram Sang1-1/+10
To detect errors like ECC errors, we must parse the R1 response bits. Introduce a helper function to also set the error value of a command when R1 error bits are set. Add ECC error to list of flags checked. Use the new helper for the stop command to call mmc_blk_recovery when detecting ECC errors which are only flagged on the next command after multiblock. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: Clarify code for sending CSDUlf Hansson1-5/+10
To make the code more consistent and to increase readability, add an mmc_spi_send_csd() function, which gets called from mmc_send_csd() in case of SPI mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() insteadUlf Hansson1-19/+1
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Re-factor code for sending CIDUlf Hansson4-12/+12
Instead of having the caller to check for SPI mode, let's leave that to internals of mmc_send_cid(). In this way the code gets cleaner and it becomes clear what is specific to SPI and non-SPI mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Remove redundant code in mmc_send_cid()Ulf Hansson1-7/+0
The mmc_send_cid() is never called using non SPI mode. Thus, let's remove the redundant code dealing with this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Make mmc_can_reset() staticUlf Hansson2-3/+1
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Move mmc_flush_cache() from core.c to mmc_ops.cUlf Hansson2-21/+21
The mmc_flush_cache() is a eMMC specific function, let's move it to mmc_ops.c to make that clear. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Move mmc_interrupt_hpi() from core.c to mmc_ops.cUlf Hansson3-66/+65
The mmc_interrupt_hpi() is a eMMC specific function, let's move it to mmc_ops.c to make that clear. The move also enables us to make mmc_send_hpi_cmd() static, so let's do that change as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Move mmc bkops functions from core.c to mmc_ops.cUlf Hansson3-119/+113
The mmc_start_bkops(), mmc_stop_bkops() and mmc_read_bkops_status() functions are all specific to eMMCs. To make this clear, let's move them from from core.c to mmc_ops.c and take the opportunity to make mmc_read_bkops_status() static. While moving them, get rid of MMC_BKOPS_MAX_TIMEOUT (4 min) and use the common default timeout MMC_OPS_TIMEOUT_MS (10 min) instead, as there is no need to have specific default timeout for bkops. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Don't export some eMMC specific functions from core.cUlf Hansson1-4/+0
The mmc_start|stop_bkops(), mmc_read_bkops_status() and mmc_interrupt_hpi() functions are all used from within the mmc core module, thus there are no need to use EXPORT_SYMBOL() for them, so let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: host: omap_hsmmc: use mmc_regulator_get_supply() to get regulatorsKishon Vijay Abraham I1-20/+14
In preparation for using the generic mmc binding for io regulator ("vqmmc"), use mmc_regulator_get_supply() to get vmmc and vqmmc regulators. Only if "vqmmc" regulator isn't found, fallback to use "vmmc_aux" regulator. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: host: omap_hsmmc: Do not initialize MMC regulators to NULL on errorKishon Vijay Abraham I1-12/+9
Do not initialize MMC regulators to NULL on error in omap_hsmmc driver similar to what is done in mmc_regulator_get_supply(). This is in preparation for using mmc_regulator_get_supply() to get MMC regulators. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdio: Keep card runtime resumed while adding function devicesAdrian Hunter1-1/+12
Drivers core will runtime suspend a device with no driver. That means the SDIO card will be runtime suspended as soon as it is added. It is then runtime resumed to add each function. That is entirely pointless, so add pm runtime get/put to keep the SDIO card runtime resumed until the function devices have been added. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdio: Tidy error path in mmc_attach_sdio()Adrian Hunter1-7/+6
The error path deletes the device by calling mmc_sdio_remove() which must be called without the host claimed. Simplify the error path so it does just that and add a comment about why we don't disable runtime PM. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-pci: Add support for Intel CNPAdrian Hunter2-1/+48
Add PCI ids and enhanced strobe support for Intel CNP. This is combined with GLK due to the pending CMDQ support which they both share. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio, renesas-sdhi: update Renesas related copyrightsSimon Horman5-6/+14
Update copyrights to reflect work by Wolfram Sang and myself since last year. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: use EXPORT_SYMBOL_GPLSimon Horman1-10/+10
Use EXPORT_SYMBOL_GPL rather than the non _GPL variant as there seems to be no reason not to. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-acpi: Remove unneeded acpi_bus_get_status() callHans de Goede1-3/+0
The acpi-subsys already calls acpi_bus_get_status() and checks that device->status.present is set before even registering the platform_device so out probe function will never get called if device->status.present is false and there is no need for this check. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: make sure SDIO gets reinitialized after resumeWolfram Sang1-7/+10
To achieve that, we set the registers in the generic HW reset routine which gets called at both, init and resume. We also make sure to move SDIO initialization before reset gets called in probe(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-pci: Use macros in pci_ids definitionMatthias Kraemer2-549/+112
This patch applies customized PCI_DEVICE_ macros to specify the pci_ids instead of open-coding them within the sdhci-pci driver. By introducing device specific macros the pci_ids table becomes much shorter and easier to comprehend than it would be possible using the generic version of the PCI_DEVICE_ macros. Signed-off-by: Matthias Kraemer <matthiasmartinsson@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-esdhc-imx: Remove the ENGcm07207 workaroundBenoît Thébaudeau1-12/+4
The SDHCI_QUIRK_NO_MULTIBLOCK quirk was used as a workaround for the ENGcm07207 erratum. However, it caused excruciatingly slow SD transfers (300 kB/s on average), and this erratum actually does not imply that multiple-block transfers are not supported, so this was overkill. The suggested workaround for this erratum is to set SYSCTL.RSTA, but the simple DAT line software reset (which resets the DMA circuit among others) triggered by sdhci_finish_data() in case of errors seems to be sufficient. Indeed, generating errors in a controlled manner on i.MX25 using the FEVT register right in the middle of read data transfers without this quirk shows that nothing is written to the buffer by the eSDHC past CMD12, and no extra Auto CMD12 is sent with AC12EN set, so the data transfers on AHB are properly aborted. For write data transfers, neither extra data nor extra Auto CMD12 is sent, as expected. Moreover, after intensive stress tests on i.MX25, removing SDHCI_QUIRK_NO_MULTIBLOCK seems to be safe. SDHCI_QUIRK_BROKEN_ADMA has nothing to do with ENGcm07207, so set ESDHC_FLAG_ERR004536 for the devices that had ESDHC_FLAG_ENGCM07207 set in order to continue getting SDHCI_QUIRK_BROKEN_ADMA. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-esdhc-imx: Allow all supported prescaler valuesBenoît Thébaudeau1-11/+7
On i.MX, SYSCTL.SDCLKFS may always be set to 0 in order to make the SD clock frequency prescaler divide by 1 in SDR mode, even with the eSDHC. The previous minimum prescaler value of 2 in SDR mode with the eSDHC was a code remnant from PowerPC, which actually has this limitation on earlier revisions. In DDR mode, the prescaler can divide by up to 512. The maximum SD clock frequency in High Speed mode is 50 MHz. On i.MX25, this change makes it possible to get 48 MHz from the USB PLL (240 MHz / 5 / 1) instead of only 40 MHz from the USB PLL (240 MHz / 3 / 2) or 33.25 MHz from the AHB clock (133 MHz / 2 / 2). Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-esdhc-imx: Fix DAT line software resetBenoît Thébaudeau1-21/+38
On i.MX25, the eSDHC DAT line software reset (SYSCTL.RSTD) unexpectedly clears at least the data transfer width (PROCTL.DTW), which then results in data CRC errors. This behavior is not documented, but it has actually been observed. Consequently, the DAT line software resets triggered by sdhci.c in case of errors caused unrecoverable errors. Fix this by making sure that the DAT line software reset does not alter the Host Control register. This behavior being undocumented, it may also be present on other i.MX SoCs, so apply this fix for the whole i.MX family. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDRBenoît Thébaudeau1-0/+1
The eSDHC can only DMA from 32-bit-aligned addresses. This fixes the following test cases of mmc_test: 11: Badly aligned write 12: Badly aligned read 13: Badly aligned multi-block write 14: Badly aligned multi-block read Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-esdhc-imx: Fix some English mistakes and typosBenoît Thébaudeau1-24/+25
Fix various English mistakes and typos in comments and in printed strings. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: mediatek: Fixed size in dma_free_coherentPhong LE1-1/+1
The dma gpd dma_free_coherent call size in invalid. Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: bcm2835: fix potential null pointer dereferencesGustavo A. R. Silva1-3/+9
Null check at line 1165: if (mrq->cmd), implies that mrq->cmd might be NULL. Add null checks before dereferencing pointer mrq->cmd in order to avoid any potential NULL pointer dereference. Addresses-Coverity-ID: 1408740 Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: use proper name for the R-Car SoCWolfram Sang1-1/+1
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: Use device_property_read instead of of_property_readDavid Woods1-37/+35
Using the device_property interfaces allows mmc drivers to work on platforms which run on either device tree or ACPI. Signed-off-by: David Woods <dwoods@mellanox.com> Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: stable@vger.linux.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: dw_mmc: Use device_property_read instead of of_property_readDavid Woods1-12/+12
Using the device_property interfaces allows the dw_mmc driver to work on platforms which run on either device tree or ACPI. Signed-off-by: David Woods <dwoods@mellanox.com> Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: stable@vger.linux.org Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhci-esdhc-imx: Check the return value from clk_prepare_enable()Fabio Estevam1-13/+41
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: fix semicolon.cocci warningsWu Fengguang1-1/+1
drivers/mmc/core/block.c:1929:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: Use __mmc_send_status() and drop get_card_status()Ulf Hansson3-21/+12
The only reason to why the mmc block device driver needs to implements its own version of how to get the status of the card, is that it needs to specify a different amount of retries. Therefore add a new exported function which allows the caller to specify the number of retries and convert everybody to use it, as this simplifies the code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20mmc: block: Move boot partition locking into a driver opLinus Walleij2-24/+33
This moves the boot partition lock command (issued from sysfs) into a custom block layer request, just like the ioctl()s, getting rid of yet another instance of mmc_get_card(). Since we now have two operations issuing special DRV_OP's, we rename the result variable ->drv_op_result. Tested by locking the boot partition from userspace: > cd /sys/devices/platform/soc/80114000.sdi4_per2/mmc_host/mmc3/ mmc3:0001/block/mmcblk3/mmcblk3boot0 > echo 1 > ro_lock_until_next_power_on [ 178.645324] mmcblk3boot1: Locking boot partition ro until next power on [ 178.652221] mmcblk3boot0: Locking boot partition ro until next power on Also tested this with a huge dd job in the background: it is now possible to lock the boot partitions on the card even under heavy I/O. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: Move DRV OP issue functionLinus Walleij1-37/+37
We will need to access static functions above the pure block layer operations in the file, so move the driver operations issue function down so we can see all non-blocklayer symbols. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: Tag DRV_OPs with a driver operation typeLinus Walleij2-13/+33
We will expand the DRV_OP usage, so we need to know which operation we're performing. Tag the operations with an enum:ed type and rename the function so it is clear that it deals with any command and put a switch statement in it. Currently only ioctls are supported. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: remove req back pointerLinus Walleij3-13/+16
Just as we can use blk_mq_rq_from_pdu() to get the per-request tag we can use blk_mq_rq_to_pdu() to get a request from a tag. Introduce a static inline helper so we are on the clear what is happening. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdhi: add CMD23 support to R-Car Gen2 & Gen3Wolfram Sang1-2/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: add CMD23 supportWolfram Sang1-13/+28
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: move finish_request function further downWolfram Sang1-38/+38
Plain code move with no changes. Needed for refactoring. Also, looks nicer if request and finish_request are next to each other. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-14 19:11:25 +0000