| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When i2c client unregisters, synchronize irq before setting
iproc_i2c->slave to NULL.
(1) disable_irq()
(2) Mask event enable bits in control reg
(3) Erase slave address (avoid further writes to rx fifo)
(4) Flush tx and rx FIFOs
(5) Clear pending event (interrupt) bits in status reg
(6) enable_irq()
(7) Set client pointer to NULL
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000318
[ 371.020421] pc : bcm_iproc_i2c_isr+0x530/0x11f0
[ 371.025098] lr : __handle_irq_event_percpu+0x6c/0x170
[ 371.030309] sp : ffff800010003e40
[ 371.033727] x29: ffff800010003e40 x28: 0000000000000060
[ 371.039206] x27: ffff800010ca9de0 x26: ffff800010f895df
[ 371.044686] x25: ffff800010f18888 x24: ffff0008f7ff3600
[ 371.050165] x23: 0000000000000003 x22: 0000000001600000
[ 371.055645] x21: ffff800010f18888 x20: 0000000001600000
[ 371.061124] x19: ffff0008f726f080 x18: 0000000000000000
[ 371.066603] x17: 0000000000000000 x16: 0000000000000000
[ 371.072082] x15: 0000000000000000 x14: 0000000000000000
[ 371.077561] x13: 0000000000000000 x12: 0000000000000001
[ 371.083040] x11: 0000000000000000 x10: 0000000000000040
[ 371.088519] x9 : ffff800010f317c8 x8 : ffff800010f317c0
[ 371.093999] x7 : ffff0008f805b3b0 x6 : 0000000000000000
[ 371.099478] x5 : ffff0008f7ff36a4 x4 : ffff8008ee43d000
[ 371.104957] x3 : 0000000000000000 x2 : ffff8000107d64c0
[ 371.110436] x1 : 00000000c00000af x0 : 0000000000000000
[ 371.115916] Call trace:
[ 371.118439] bcm_iproc_i2c_isr+0x530/0x11f0
[ 371.122754] __handle_irq_event_percpu+0x6c/0x170
[ 371.127606] handle_irq_event_percpu+0x34/0x88
[ 371.132189] handle_irq_event+0x40/0x120
[ 371.136234] handle_fasteoi_irq+0xcc/0x1a0
[ 371.140459] generic_handle_irq+0x24/0x38
[ 371.144594] __handle_domain_irq+0x60/0xb8
[ 371.148820] gic_handle_irq+0xc0/0x158
[ 371.152687] el1_irq+0xb8/0x140
[ 371.155927] arch_cpu_idle+0x10/0x18
[ 371.159615] do_idle+0x204/0x290
[ 371.162943] cpu_startup_entry+0x24/0x60
[ 371.166990] rest_init+0xb0/0xbc
[ 371.170322] arch_call_rest_init+0xc/0x14
[ 371.174458] start_kernel+0x404/0x430
Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Drivers using legacy power management .suspen()/.resume() callbacks
have to manage PCI states and device's PM states themselves. They also
need to take care of standard configuration registers.
Switch to generic power management framework using a single
"struct dev_pm_ops" variable to take the unnecessary load from the driver.
This also avoids the need for the driver to directly call most of the PCI
helper functions and device power state control functions, as through
the generic framework PCI Core takes care of the necessary operations,
and drivers are required to do only device-specific jobs.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The driver calls pci_enable_wake(...., false) in pch_i2c_suspend() as well
as pch_i2c_resume(). Either it should enable-wake the device in .suspend()
or should not invoke pci_enable_wake() at all.
Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
.suspend() and .resume().
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The struct i2c_spec_values have it's members documented but is
missing the starting '@', which leads to warings like:
drivers/i2c/busses/i2c-mt65xx.c:267: warning: Function parameter or member 'min_low_ns' not described in 'i2c_spec_values'
We also delete min_high_ns member as it is not used in the code.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add i2c compatible for MT8192. Compare to MT8183 i2c controller,
MT8192 support more then 8GB DMA mode.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Newer MTK chip support more than 8GB of dram. Replace support_33bits
with more general dma_max_support and remove mtk_i2c_set_4g_mode.
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
With the apdma remove hand-shake signal, it need to keep i2c and
apdma in sync manually.
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add SMBus PCI ID on Intel Tiger Lake PCH-H.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add support for SMBus controller on Intel Emmitsburg PCH. This is the
same IP as used in Cannon Lake and derivatives.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
[wsa: shortened commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Make the Microchip at91 driver the first to use the generic GPIO bus
recovery support from the I2C core and discard the driver implementation.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Even if I2C bus GPIO recovery is optional, devm_gpiod_get() can return
-EPROBE_DEFER, so we should at least treat that. This ends up with
i2c_register_adapter() to be able to return -EPROBE_DEFER.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Multiple I2C bus drivers use similar bindings to obtain information needed
for I2C recovery. For example, for platforms using device-tree, the
properties look something like this:
&i2c {
...
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c_default>;
pinctrl-1 = <&pinctrl_i2c_gpio>;
sda-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pio 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
...
}
For this reason, we can add this common initialization in the core. This
way, other I2C bus drivers will be able to support GPIO recovery just by
providing a pointer to platform's pinctrl and calling i2c_recover_bus()
when SDA is stuck low.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
[wsa: inverted one logic for better readability, minor update to kdoc]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Due to the lockless design of the driver, it is theoretically possible
to access a NULL pointer, if a slave interrupt was running while we were
unregistering the slave. To make this rock solid, disable the interrupt
for a short time while we are clearing the interrupt_enable register.
This patch is purely based on code inspection. The OOPS is super-hard to
trigger because clearing SAR (the address) makes interrupts even more
unlikely to happen as well. While here, reinit SCR to SDBS because this
bit should always be set according to documentation. There is no effect,
though, because the interface is disabled.
Fixes: 7b814d852af6 ("i2c: rcar: avoid race when unregistering slave client")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
|
|
VI I2C is on host1x bus so APB DMA can't be used for Tegra210 VI
I2C and there are no tx and rx dma channels for VI I2C.
So, avoid attempt of requesting DMA channels.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
VI I2C is on host1x bus and is part of VE power domain.
During suspend/resume VE power domain goes through power off/on.
So, controller reset followed by i2c re-initialization is required
after the domain power up.
This patch fixes it.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
tegra_i2c_runtime_resume does not disable prior enabled clocks
properly.
This patch fixes it.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
clk_enable/disable/prepare/unprepare
clk_enable, clk_disable, clk_prepare, and clk_unprepare APIs have
implementation for checking clk pointer not NULL and clock consumers
can safely call these APIs without NULL pointer check.
So, this patch cleans up Tegra i2c driver to remove explicit checks
before these APIs.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Tegra VI I2C is part of VE power domain and typically used for
camera usecases.
VE power domain is not always on and is non-IRQ safe. So, IRQ safe
device cannot be attached to a non-IRQ safe domain as it prevents
powering off the PM domain and generic power domain driver will warn.
Current driver marks all I2C devices as IRQ safe and VI I2C device
does not require IRQ safe as it will not be used for atomic transfers.
This patch has fix to make VI I2C as non-IRQ safe.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Let's rather use its physical parent device to give proper namings and
connections in debugfs.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver fixes for 5.8-rc7
They include:
- habanalabs fixes
- tiny fpga driver fixes
- /dev/mem fixup from previous changes
- interconnect driver fixes
- binder fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: msm8916: Fix buswidth of pcnoc_s nodes
interconnect: Do not skip aggregation for disabled paths
/dev/mem: Add missing memory barriers for devmem_inode
binder: Don't use mmput() from shrinker function.
habanalabs: prevent possible out-of-bounds array access
fpga: dfl: fix bug in port reset handshake
fpga: dfl: pci: reduce the scope of variable 'ret'
habanalabs: set 4s timeout for message to device CPU
habanalabs: set clock gating per engine
habanalabs: block WREG_BULK packet on PDMA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master
Pull driver core fix from Greg KH:
"A single driver core fix for 5.8-rc7. It resolves a problem found in
the previous fix for this code made in 5.8-rc6. Hopefully this is all
now cleared up, as this seems to be the last of the reported issues in
this area, and was tested on the problem hardware.
This patch has been in linux-next with no reported problems"
* tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Avoid NULL pointer dereference in device_get_next_child_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master
Pull staging driver fixes from Greg KH:
"Five small staging driver fixes for 5.8-rc7 to resolve some reported
problems:
- four comedi driver fixes for problems found with them
- a syzbot-found fix for the wlang-ng driver that resolves a much
reported problem.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wlan-ng: properly check endpoint types
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty and serial and fbcon fixes for 5.8-rc7 to
resolve some reported issues.
The fbcon fix is in here as it was simpler to take it this way (and it
was acked by the maintainer) as it was related to the vt console fix
as well, both of which resolve syzbot-found issues in the console
handling code.
The other serial driver fixes are for small issues reported in the -rc
releases.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
serial: 8250_mtk: Fix high-speed baud rates clamping
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
serial: tegra: drop bogus NULL tty-port checks
serial: tegra: fix CREAD handling for PIO
tty: xilinx_uartps: Really fix id assignment
vt: Reject zero-sized screen buffer size.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master
Pull USB fixes from Greg KH:
"Three small USB XHCI driver fixes for 5.8-rc7.
They all resolve some minor issues that have been reported on some
different platforms.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: tegra: Fix allocation for the FPCI context
usb: xhci: Fix ASM2142/ASM3142 DMA addressing
usb: xhci-mtk: fix the failure of bandwidth allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master
Pull SCSI fix from James Bottomley:
"Small core patch to fix a corner case bug: we forgot to run the queues
to handle starvation in the error exit from the scsi_queue_rq routine,
which can lead to hangs on error conditions"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Run queue in case of I/O resource contention failure
|
|
When the SSR interrupt is activated, it will detect every STOP condition
on the bus, not only the ones after we have been addressed. So, enable
this interrupt only after we have been addressed, and disable it
otherwise.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fix from Ingo Molnar:
"Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"
* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
|
|
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
|
|
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master
Pull PCI fixes from Bjorn Helgaas:
- Reject invalid IRQ 0 command line argument for virtio_mmio because
IRQ 0 now generates warnings (Bjorn Helgaas)
- Revert "PCI/PM: Assume ports without DLL Link Active train links in
100 ms", which broke nouveau (Bjorn Helgaas)
* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
virtio-mmio: Reject invalid IRQ 0 command line argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.8
Second set of fixes for v5.8, and hopefully also the last. Three
important regressions fixed.
ath9k
* fix a regression which broke support for all ath9k usb devices
ath10k
* fix a regression which broke support for all QCA4019 AHB devices
iwlwifi
* fix a regression which broke support for some Killer Wireless-AC 1550 cards
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into master
Pull iommu fix from Joerg Roedel:
"Fix a NULL-ptr dereference in the QCOM IOMMU driver"
* tag 'iommu-fix-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Use domain rather than dev as tlb cookie
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma into master
Pull rdma fixes from Jason Gunthorpe:
"One merge window regression, some corruption bugs in HNS and a few
more syzkaller fixes:
- Two long standing syzkaller races
- Fix incorrect HW configuration in HNS
- Restore accidentally dropped locking in IB CM
- Fix ODP prefetch bug added in the big rework several versions ago"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Prevent prefetch from racing with implicit destruction
RDMA/cm: Protect access to remote_sidr_table
RDMA/core: Fix race in rdma_alloc_commit_uobject()
RDMA/hns: Fix wrong PBL offset when VA is not aligned to PAGE_SIZE
RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC
RDMA/mlx5: Use xa_lock_irq when access to SRQ table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm into master
Pull device mapper fix from Mike Snitzer:
"A stable fix for DM integrity target's integrity recalculation that
gets skipped when resuming a device. This is a fix for a previous
stable@ fix"
* tag 'for-5.8/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix integrity recalculation that is improperly skipped
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into master
Pull i2c fixes from Wolfram Sang:
"Again some driver bugfixes and some documentation fixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-qcom-geni: Fix DMA transfer race
i2c: rcar: always clear ICSAR to avoid side effects
MAINTAINERS: i2c: at91: handover maintenance to Codrin Ciubotariu
i2c: drop duplicated word in the header file
i2c: cadence: Clear HOLD bit at correct time in Rx path
Revert "i2c: cadence: Fix the hold bit setting"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc into master
Pull MMC fix from Ulf Hansson:
"Fix clock divider calculation in the ASPEED SDHCI controller"
* tag 'mmc-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-aspeed: Fix clock divider calculation
|
|
into master
Pull drm fixes from Dave Airlie:
"Quiet fixes, I may have a single regression fix follow up to this for
nouveau, but it might be next week, Ben was testing it a bit more .
Otherwise two amdgpu fixes, one lima and one sun4i:
amdgpu:
- Fix crash when overclocking VegaM
- Fix possible crash when editing dpm levels
sun4i:
- Fix inverted HPD result; fixes an earlier fix
lima:
- fix timeout during reset"
* tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
drm/amd/powerplay: fix a crash when overclocking Vega M
drm/lima: fix wait pp reset timeout
drm: sun4i: hdmi: Fix inverted HPD result
|
|
This manually reverts commit d1d84bb95364ed604015c2b788caaf3dbca0262f.
The only user has gone two years ago with commit 589edb56b424 ("ACPI /
scan: Create platform device for INT33FE ACPI nodes") and no new user
has showed up. Remove and hope we will never need it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Ports should be defined in the devicetree if they are to be enabled on
the system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d
With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.
Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
geneve_nl2info() sets 'df' conditionally, so we have to
initialize it by copying the value from existing geneve
device in geneve_changelink().
Fixes: 56c09de347e4 ("geneve: allow changing DF behavior after creation")
Reported-by: syzbot+7ebc2e088af5e4c0c9fa@syzkaller.appspotmail.com
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Very similar to commit 544f287b8495
("bonding: check error value of register_netdevice() immediately"),
we should immediately check the return value of register_netdevice()
before doing anything else.
Fixes: 005db31d5f5f ("bonding: set carrier off for devices created through netlink")
Reported-and-tested-by: syzbot+bbc3a11c4da63c1b74d6@syzkaller.appspotmail.com
Cc: Beniamino Galvani <bgalvani@redhat.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I have KASAN enabled on my kernel and I start stressing the
touchscreen my system tends to hang. The touchscreen is one of the
only things that does a lot of big i2c transfers and ends up hitting
the DMA paths in the geni i2c driver. It appears that KASAN adds
enough delay in my system to tickle a race condition in the DMA setup
code.
When the system hangs, I found that it was running the geni_i2c_irq()
over and over again. It had these:
m_stat = 0x04000080
rx_st = 0x30000011
dm_tx_st = 0x00000000
dm_rx_st = 0x00000000
dma = 0x00000001
Notably we're in DMA mode but are getting M_RX_IRQ_EN and
M_RX_FIFO_WATERMARK_EN over and over again.
Putting some traces in geni_i2c_rx_one_msg() showed that when we
failed we were getting to the start of geni_i2c_rx_one_msg() but were
never executing geni_se_rx_dma_prep().
I believe that the problem here is that we are starting the geni
command before we run geni_se_rx_dma_prep(). If a transfer makes it
far enough before we do that then we get into the state I have
observed. Let's change the order, which seems to work fine.
Although problems were seen on the RX path, code inspection suggests
that the TX should be changed too. Change it as well.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On R-Car Gen2, we get a timeout when reading from the address set in
ICSAR, even though the slave interface is disabled. Clearing it fixes
this situation. Note that Gen3 is not affected.
To reproduce: bind and undbind an I2C slave on some bus, run
'i2cdetect' on that bus.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended
device during destroy") broke integrity recalculation.
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad366b ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
