| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Correctable ECC events are not fatal, but as they accumulate, the f/w
can decide that a hard-rest is required. This indication is
propagated to the host using the existing ECC event interface.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Enable the Gaudi2 ASIC code in the pci probe callback of the driver so
the driver will handle Gaudi2 ASICs.
Add the PCI ID to the PCI table and add the ASIC enum value to all
relevant places.
Fixup the device parameters initialization for Gaudi2.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Gaudi2 has new MMU units. A PMMU for device->host accesses, and HMMU
for HBM accesses.
The page tables of both MMUs are located in the host's memory (referred
to in the code as host-resident pgt).
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In Gaudi2 we moved to a different wait for command submission
completion model. Instead of receiving interrupt only on external
queues, we use the device's sync manager to notify us when the
entire command submission finishes.
This enables us to remove the categorization of queues to external
and internal, and treat each queue equally, without the need to parse
and patch any command buffer.
This change also requires refactoring to the IRQ handling of
CS completions.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add the Gaudi2 code to initialize the ASIC's profiler. The profile
receives its initialization values from the user, same as in Gaudi2,
but the code to initialize is in the driver because the configuration
space of the device is not directly exposed to the user.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Use the generic security module to block all registers in the ASIC and
then open only those that are needed to be accessed by the user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As the ASICs become more complex and have many more registers, we need
a better way to configure the security properties.
As a reminder, we have two dedicated mechanisms for security:
Range Registers and Protection bits. Those mechanisms protect sensitive
memory and configuration areas inside the device.
The generic module handles the low-level part of the configuration,
because the configuration mechanism is identical in all ASICs. The
difference is the address ranges and register names.
Any ASIC that use this block should first block all the register
blocks in the ASIC. Then, it should open only the registers that
need to be accessed by the user (This is opposed to Goya and Gaudi,
where we blocked only what should not be accesses by the user).
The module contains several functions, to unblock single register,
multiple registers, entire blocks, ranges, ranges with mask.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There are a couple of device variables that are used for testing
purposes and they are set to fixed values.
Remove the variables that are not relevant anymore and document the
remaining variables.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
New asic properties were added for Gaudi2. We want to initialize
and use them, when relevant, also for Goya and Gaudi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There are a number of new ASIC-specific functions that were added
for Gaudi2. To make the common code work, we need to define empty
implementations of those functions for Goya and Gaudi.
Some functions will return error if called with Goya/Gaudi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add the ASIC-specific code for Gaudi2. Supply (almost) all of the
function callbacks that the driver's common code need to initialize,
finalize and submit workloads to the Gaudi2 ASIC.
It also contains the code to initialize the F/W of the Gaudi2 ASIC
and to receive events from the F/W.
It contains new debugfs entry to dump razwi events. razwi is a case
where the device's engines create a transaction that reaches an
invalid destination.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add the relevant GAUDI2 ASIC registers header files. These files are
generated automatically from a tool maintained by the VLSI engineers.
There are more files which are not upstreamed because only very few
defines from those files are used in the driver. For those files, I
copied the relevant defines into gaudi2_regs.h and gaudi2_masks.h, to
reduce the size of this patch.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Region structure is derived from region type, hence no need to pass
it as an argument.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
PCI bar size is resource_size_t so we should use %pa to make it work
correctly on all architectures.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
in gaudi_scrub_device_mem, replace call to hl_poll_timeout
with a while loop to avoid using dummy variables.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Because in future ASICs the driver will allow the user to set the
page size we need to make sure this data is propagated in all APIs.
In addition, since this is already an ASIC property we no longer need
ASIC function for it.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
free_device_memory() ends with if and else, each has a return statement,
followed by another return statement that can never be reached.
Restructure the function and remove this dead code.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We want to receive an error interrupt in case the watchdog timer
expires on arbitration event in the queues.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We dropped support for page sizes that are not power of 2.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This is a pre-requisite patch for adding tracepoints to the DMA memory
operations (allocation/free) in the driver.
The main purpose is to be able to cross data with the map operations and
determine whether memory violation occurred, for example free DMA
allocation before unmapping it from device memory.
To achieve this the DMA alloc/free code flows were refactored so that a
single DMA tracepoint will catch many flows.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Also beautify code by preferring single line wherever possible.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This fixes a sparse warning of
"cast truncates bits from constant value"
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
packets are defined as LE so we need to convert before assigning
values to them.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
function name in comment didn't match actual function name.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The values in this enum are not used by h/w but are a contract
between userspace and the kernel driver so they must be defined
in the uapi file.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Set a default value for memory scrubbing
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In future ASICs, it would be possible to have a non-idle
device when context is released. We thus need to postpone the
scrubbing. Postpone it to hpriv release if reset is not executed
or to device late init if reset is executed.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In the callback scrub_device_mem, use 'memory_scrub_val'
from debugfs for the scrubbing value.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We use scrub_device_mem only to scrub the entire SRAM and entire
DRAM. Therefore there is no need to send addr and size
args to the callback.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There is no need to do memory scrub when unmapping anymore as it is
an overhead as long as we have a single user at any given time.
Remove that code and change return value of free_phys_pg_pack to void
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
For easier debug, it is desirable to have a simple way
to know whether the device is secured or not, hence we dump this
indication during boot.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There is a rare race condition in CB completion mechanism, that can
occur under a very high pressure of command submissions.
The preconditions for this to happen are:
1. There should be enough command submissions for the pre-allocated
patched CB pool to run out of commands. At this stage we start
allocating new patched CBs as they arrive.
2. CB size has to be exactly (128*n + 104)B for some n, i.e. 24B below
a cache line end.
The flow:
1. Two command buffers being completed on different streams, at the
same time. Denote those CB1 and CB2.
2. Each command buffer is injected with two messages, 16B each - one
for a HBW update of the completion queue, another to raise
interrupt.
3. Assume CB1 updated the completion queue and raise the interrupt.
4. Assume CB2 updated the completion queue but did not raise the
interrupt yet.
5. The host receives the interrupt. It goes over the completion queue
and sees two completions - CB1 and CB2. Release them both.
6. CB2 performs the last command. The problem is that the last command
is split between 2 cache lines. So to read the last 8B of the last
command, it has to access the host again. Problem is - CB2 is
already released. This causes a DMAR error.
The solution to this problem is simply to make sure the last two
commands in the CB are always in the same cache line, using NOP padding.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
kernel test robot:
"warning: variable 'index' is used uninitialized whenever 'if' condition
is false"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
move the field memory_scrub_val from struct hl_dbg_device_entry
to struct hl_device. This is because we want to use
this field also if debugfs is off.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
function name should not be preceded with @
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
kvcalloc is same as kvmalloc_array with GFP_ZERO.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Use %p instead of %llx for printing pointers.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
fence pointer can be NULL in this path, as shown by an earlier check.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Multiple SRAM SERR events are treated as critical events,
and host should be notified about it. Thus, adding is_critical
indication as part of SRAM ECC failure packet.
Signed-off-by: ran shalit <rshalit@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When a device error occurs, user process would like to get some
indication on the error by reading some device HW info. If the
device is unavailable, user process can't perform any HW device
reading.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This asic callback function is not called anymore from the common code.
The asic-specific function itself is called but from within the
asic-specific code.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Device descriptor is accessed before an assignment
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When validating NIC queues, queue offset calculation must be
performed only for NIC queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Driver performs no validity check for the user cq counter offset
used in both wait_for_interrupt and register_for_timestamp APIs.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Once FW raised an event following a MME2 QMAN error, the driver should
have gone to the corresponding status registers, trying to gather more
info on the error, yet it was accidentally accessing MME1 QMAN address
space.
Generally, we have x4 MMEs, while 0 & 2 are marked MASTER, and
1 & 3 are marked SLAVE. The former can be addressed, yet addressing
the latter is considered an access violation, and will result in a
hung system, which is what unintentionally happened above.
Note that this cannot happen in a secured system, since these registers
are protected with range registers.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When sending a packet to FW right after it made reset, we will get
packet timeout. Since it is expected behavior, we don't need to
print an error in such case.
Hence, when driver is in hard reset it will avoid from printing error
messages about packet timeout.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The Driver needs to inform the User process whenever one of its
CS is timed out. The Driver shall recognize the CS timeout and shall
send an eventfd notification, towards user space, whenever a timeout
is expired on a CS.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Device reset event, indicates that the device shall be reset -
after a short delay. In such case, the driver sends a notification
towards the User process. This allows the User process
to be able to take several debug actions for system
diagnostic purposes.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to prepare the driver code for device reset event
notification, change the event handler function flow to call
device reset from one code block.
In addition, the commit fixes an issue that reset was performed
w/o checking the 'hard_reset_on_fw_event' state and w/o setting
the HL_DRV_RESET_DELAY flag.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The info ioctl retrieves information on the last undefined opcode
occurred.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
