summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-01-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fix a recent regression in the Ingenic SoCs irqchip driver that floods the syslog" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Get rid of the legacy IRQ domain
2020-01-18Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds2-12/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Three EFI fixes: - Fix a slow-boot-scrolling regression but making sure we use WC for EFI earlycon framebuffer mappings on x86 - Fix a mixed EFI mode boot crash - Disable paging explicitly before entering startup_32() in mixed mode bootup" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efistub: Disable paging at mixed mode entry efi/libstub/random: Initialize pointer variables to zero for mixed mode efi/earlycon: Fix write-combine mapping on x86
2020-01-18Merge tag 's390-5.5-5' of ↵Linus Torvalds7-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix printing misleading Secure-IPL enabled message when it is not. - Fix a race condition between host ap bus and guest ap bus doing device reset in crypto code. - Fix sanity check in CCA cipher key function (CCA AES cipher key support), which fails otherwise. * tag 's390-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/setup: Fix secure ipl message s390/zcrypt: move ap device reset from bus to driver code s390/zcrypt: Fix CCA cipher key gen with clear key value function
2020-01-18Merge tag 'scsi-fixes' of ↵Linus Torvalds3-174/+63
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes in drivers with no impact to core code. The mptfusion fix is enormous because the driver API had to be rethreaded to pass down the necessary iocp pointer, but once that's done a significant chunk of code is deleted. The other two patches are small" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptfusion: Fix double fetch bug in ioctl scsi: storvsc: Correctly set number of hardware queues for IDE disk scsi: fnic: fix invalid stack access
2020-01-18Merge tag 'char-misc-5.5-rc7' of ↵Linus Torvalds2-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small fixes for 5.5-rc7 Included here are: - two lkdtm fixes - coresight build fix - Documentation update for the hw process document All of these have been in linux-next with no reported issues" * tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Add Amazon contact for embargoed hardware issues lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP lkdtm/bugs: Make double-fault test always available coresight: etm4x: Fix unused function warning
2020-01-18Merge tag 'staging-5.5-rc7' of ↵Linus Torvalds6-16/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small staging and iio driver fixes for 5.5-rc7 All of them are for some small reported issues. Nothing major, full details in the shortlog. All have been in linux-next with no reported issues" * tag 'staging-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: ni_routes: allow partial routing information staging: comedi: ni_routes: fix null dereference in ni_find_route_source() iio: light: vcnl4000: Fix scale for vcnl4040 iio: buffer: align the size of scan bytes to size of the largest element iio: chemical: pms7003: fix unmet triggered buffer dependency iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID iio: adc: ad7124: Fix DT channel configuration
2020-01-18Merge tag 'usb-5.5-rc7' of ↵Linus Torvalds9-9/+37
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver and core fixes for 5.5-rc7 There's one fix for hub wakeup issues and a number of small usb-serial driver fixes and device id updates. The hub fix has been in linux-next for a while with no reported issues, and the usb-serial ones have all passed 0-day with no problems" * tag 'usb-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: quatech2: handle unbound ports USB: serial: keyspan: handle unbound ports USB: serial: io_edgeport: add missing active-port sanity check USB: serial: io_edgeport: handle unbound ports on URB completion USB: serial: ch341: handle unbound port at reset_resume USB: serial: suppress driver bind attributes USB: serial: option: add support for Quectel RM500Q in QDL mode usb: core: hub: Improved device recognition on remote wakeup USB: serial: opticon: fix control-message timeouts USB: serial: option: Add support for Quectel RM500Q USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
2020-01-17Merge tag 'usb-serial-5.5-rc7' of ↵Greg Kroah-Hartman8-9/+36
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.5-rc7 Here are a few fixes for issues related to unbound port devices which could lead to NULL-pointer dereferences. Notably the bind attributes for usb-serial (port) drivers are removed as almost none of the drivers can handle individual ports going away once they've been bound. Included are also some new device ids. All but the unbound-port fixes have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: quatech2: handle unbound ports USB: serial: keyspan: handle unbound ports USB: serial: io_edgeport: add missing active-port sanity check USB: serial: io_edgeport: handle unbound ports on URB completion USB: serial: ch341: handle unbound port at reset_resume USB: serial: suppress driver bind attributes USB: serial: option: add support for Quectel RM500Q in QDL mode USB: serial: opticon: fix control-message timeouts USB: serial: option: Add support for Quectel RM500Q USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
2020-01-17USB: serial: quatech2: handle unbound portsJohan Hovold1-0/+6
Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: keyspan: handle unbound portsJohan Hovold1-0/+4
Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: add missing active-port sanity checkJohan Hovold1-5/+7
The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: handle unbound ports on URB completionJohan Hovold1-2/+2
Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: ch341: handle unbound port at reset_resumeJohan Hovold1-1/+5
Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17Merge tag 'gpio-v5.5-4' of ↵Linus Torvalds2-57/+107
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "This reverts the GPIOLIB_IRQCHIP in the ThunderX driver. ThunderX is a piece of Arm-based server chip. I converted the driver to hierarchical gpiochip without access to real silicon and failed miserably since I didn't take MSI's into account. Kevin Hao helpfully stepped in and fixed it properly, let's revert it for v5.5 and put the proper conversion into v5.6" * tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
2020-01-17Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds3-3/+5
Pull block fixes from Jens Axboe: "Three fixes that should go into this release: - The 32-bit segment size fix that I mentioned last week (Ming) - Use uint for the block size (Mikulas) - A null_blk zone write handling fix (Damien)" * tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block: block: fix an integer overflow in logical block size null_blk: Fix zone write handling block: fix get_max_segment_size() overflow on 32bit arch
2020-01-17USB: serial: suppress driver bind attributesJohan Hovold1-0/+3
USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds5-15/+40
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been sitting on these longer than I meant, so the patch count is a bit higher than ideal for this part of the release. There's also some reverts of double-applied patches that brings the diffstat up a bit. With that said, the biggest changes are: - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees. - Move of two device nodes that got applied to the wrong part of the tree on ASpeed G6. - Regulator fix for Beaglebone X15 (adding 12/5V supplies) - Use interrupts for keys on Amlogic SM1 to avoid missed polls In addition to that, there is a collection of smaller DT fixes: - Power supply assignment fixes for i.MX6 - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit - Build fixlets (selects) for davinci/omap2+ - More interrupt number fixes for Stratix10, Amlogic SM1, etc. - ... and more similar fixes across different platforms And some non-DT stuff: - optee fix to register multiple shared pages properly - Clock calculation fixes for MMP3 - Clock fixes for OMAP as well" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL ARM: omap2plus: select RESET_CONTROLLER ARM: davinci: select CONFIG_RESET_CONTROLLER ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: mmp3: Fix the TWSI ranges clk: mmp2: Fix the order of timer mux parents ARM: mmp: do not divide the clock rate arm64: dts: rockchip: Fix IR on Beelink A1 optee: Fix multi page dynamic shm pool alloc ...
2020-01-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds10-41/+38
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Second collection of clk fixes for the next release. This one includes a fix for PM on TI SoCs with sysc devices and fixes a bunch of clks that are stuck always enabled on Qualcomm SDM845 SoCs. Allwinner SoCs get the usual set of fixes too, mostly correcting drivers to have the right bits that match the hardware. There's also a Samsung and Tegra fix in here to mark a clk critical and avoid a double free. And finally there's a fix for critical clks that silences a big warning splat about trying to enable a clk that couldn't even be prepared" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: dra7-atl: Remove pm_runtime_irq_safe() clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock clk: Don't try to enable critical clocks if prepare failed clk: tegra: Fix double-free in tegra_clk_init() clk: samsung: exynos5420: Keep top G3D clocks enabled clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
2020-01-16Merge tag 'pm-5.5-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a coding mistake in the teo cpuidle governor causing data to be written beyond the last array element (Ikjoon Jang)" * tag 'pm-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: teo: Fix intervals[] array indexing bug
2020-01-16Merge tag 'tag-chrome-platform-fixes-for-v5.5-rc7' of ↵Linus Torvalds1-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "One fix in the wilco_ec keyboard backlight driver to allow the EC driver to continue loading in the absence of a backlight module" * tag 'tag-chrome-platform-fixes-for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: wilco_ec: Fix keyboard backlight probing
2020-01-16USB: serial: option: add support for Quectel RM500Q in QDL modeReinhard Speyerer1-0/+2
Add support for Quectel RM500Q in QDL mode. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 0.00 S: Manufacturer=Qualcomm CDMA Technologies MSM S: Product=QUSB_BULK_SN:xxxxxxxx S: SerialNumber=xxxxxxxx C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is assumed that the ZLP flag required for other Qualcomm-based 5G devices also applies to Quectel RM500Q. Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-15block: fix an integer overflow in logical block sizeMikulas Patocka2-2/+2
Logical block size has type unsigned short. That means that it can be at most 32768. However, there are architectures that can run with 64k pages (for example arm64) and on these architectures, it may be possible to create block devices with 64k block size. For exmaple (run this on an architecture with 64k pages): Mount will fail with this error because it tries to read the superblock using 2-sector access: device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536 EXT4-fs (dm-0): unable to read superblock This patch changes the logical block size from unsigned short to unsigned int to avoid the overflow. Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-15scsi: mptfusion: Fix double fetch bug in ioctlDan Carpenter1-163/+50
Tom Hatskevich reported that we look up "iocp" then, in the called functions we do a second copy_from_user() and look it up again. The problem that could cause is: drivers/message/fusion/mptctl.c 674 /* All of these commands require an interrupt or 675 * are unknown/illegal. 676 */ 677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) ^^^^ We take this lock. 678 return ret; 679 680 if (cmd == MPTFWDOWNLOAD) 681 ret = mptctl_fw_download(arg); ^^^ Then the user memory changes and we look up "iocp" again but a different one so now we are holding the incorrect lock and have a race condition. 682 else if (cmd == MPTCOMMAND) 683 ret = mptctl_mpt_command(arg); The security impact of this bug is not as bad as it could have been because these operations are all privileged and root already has enormous destructive power. But it's still worth fixing. This patch passes the "iocp" pointer to the functions to avoid the second lookup. That deletes 100 lines of code from the driver so it's a nice clean up as well. Link: https://lore.kernel.org/r/20200114123414.GA7957@kadam Reported-by: Tom Hatskevich <tom2001tom.23@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: storvsc: Correctly set number of hardware queues for IDE diskLong Li1-1/+3
Commit 0ed881027690 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue") introduced a regression for disks attached to IDE. For these disks the host VSP only offers one VMBUS channel. Setting multiple queues can overload the VMBUS channel and result in performance drop for high queue depth workload on system with large number of CPUs. Fix it by leaving the number of hardware queues to 1 (default value) for IDE disks. Fixes: 0ed881027690 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue") Link: https://lore.kernel.org/r/1578960516-108228-1-git-send-email-longli@linuxonhyperv.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: fnic: fix invalid stack accessArnd Bergmann1-10/+10
gcc -O3 warns that some local variables are not properly initialized: drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify': drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized] vdev->args[0] = *a0; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr': drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here u64 a0, a1; ^~ Apparently the code relies on the local variables occupying adjacent memory locations in the same order, but this is of course not guaranteed. Use an array of two u64 variables where needed to make it work correctly. I suspect there is also an endianness bug here, but have not digged in deep enough to be sure. Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA") Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15Fix built-in early-load Intel microcode alignmentJari Ruusu1-1/+1
Intel Software Developer's Manual, volume 3, chapter 9.11.6 says: "Note that the microcode update must be aligned on a 16-byte boundary and the size of the microcode update must be 1-KByte granular" When early-load Intel microcode is loaded from initramfs, userspace tool 'iucode_tool' has already 16-byte aligned those microcode bits in that initramfs image. Image that was created something like this: iucode_tool --write-earlyfw=FOO.cpio microcode-files... However, when early-load Intel microcode is loaded from built-in firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that 16-byte alignment is not guaranteed. Fix this by forcing all built-in firmware BLOBs to 16-byte alignment. [ If we end up having other firmware with much bigger alignment requirements, we might need to introduce some method for the firmware to specify it, this is the minimal "just increase the alignment a bit to account for this one special case" patch - Linus ] Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-15Merge tag 'platform-drivers-x86-v5.5-3' of ↵Linus Torvalds6-25/+35
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: - Fix keyboard brightness control for ASUS laptops - Better handling parameters of GPD pocket fan module to avoid thermal shock - Add IDs to PMC platform driver to support Intel Comet Lake - Fix potential dead lock in Mellanox TM FIFO driver and ABI documentation * tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86: Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0 platform/x86: intel_pmc_core: update Comet Lake platform driver platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits platform/x86: GPD pocket fan: Use default values when wrong modparams are given platform/mellanox: fix potential deadlock in the tmfifo driver platform/x86: intel-ips: Use the correct style for SPDX License Identifier
2020-01-15Merge branch 'linus' of ↵Linus Torvalds3-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a build problem for the hisilicon driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon/sec2 - Use atomics instead of __sync
2020-01-15null_blk: Fix zone write handlingDamien Le Moal1-1/+3
null_zone_write() only allows writing empty and implicitly opened zones. Writing to closed and explicitly opened zones must also be allowed and the zone condition must be transitioned to implicit open if the zone is not explicitly opened already. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-15staging: comedi: ni_routes: allow partial routing informationIan Abbott1-6/+3
This patch fixes a regression on setting up asynchronous commands to use external trigger sources when board-specific routing information is missing. `ni_find_device_routes()` (called via `ni_assign_device_routes()`) finds the table of register values for the device family and the set of valid routes for the specific board. If both are found, `tables->route_values` is set to point to the table of register values for the device family and `tables->valid_routes` is set to point to the list of valid routes for the specific board. If either is not found, both `tables->route_values` and `tables->valid_routes` are left set at their initial null values (initialized by `ni_assign_device_routes()`) and the function returns `-ENODATA`. Returning an error results in some routing functionality being disabled. Unfortunately, leaving `table->route_values` set to `NULL` also breaks the setting up of asynchronous commands that are configured to use external trigger sources. Calls to `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` while checking the asynchronous command set-up would result in a null pointer dereference if `table->route_values` is `NULL`. The null pointer dereference is fixed in another patch, but it now results in failure to set up the asynchronous command. That is a regression from the behavior prior to commit 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") and commit 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Change `ni_find_device_routes()` to set `tables->route_values` and/or `tables->valid_routes` to valid information even if the other one can only be set to `NULL` due to missing information. The function will still return an error in that case. This should result in `tables->valid_routes` being valid for all currently supported device families even if the board-specific routing information is missing. That should be enough to fix the regression on setting up asynchronous commands to use external triggers for boards with missing routing information. Fixes: 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") Fixes: 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Cc: <stable@vger.kernel.org> # 4.20+ Cc: Spencer E. Olson <olsonse@umich.edu> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200114182532.132058-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15staging: comedi: ni_routes: fix null dereference in ni_find_route_source()Ian Abbott1-0/+3
In `ni_find_route_source()`, `tables->route_values` gets dereferenced. However it is possible that `tables->route_values` is `NULL`, leading to a null pointer dereference. `tables->route_values` will be `NULL` if the call to `ni_assign_device_routes()` during board initialization returned an error due to missing device family routing information or missing board-specific routing information. For example, there is currently no board-specific routing information provided for the PCIe-6251 board and several other boards, so those are affected by this bug. The bug is triggered when `ni_find_route_source()` is called via `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` when checking the arguments for setting up asynchronous commands. Fix it by returning `-EINVAL` if `tables->route_values` is `NULL`. Even with this fix, setting up asynchronous commands to use external trigger sources for boards with missing routing information will still fail gracefully. Since `ni_find_route_source()` only depends on the device family routing information, it would be better if that was made available even if the board-specific routing information is missing. That will be addressed by another patch. Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information") Cc: <stable@vger.kernel.org> # 4.20+ Cc: Spencer E. Olson <olsonse@umich.edu> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200114182532.132058-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: core: hub: Improved device recognition on remote wakeupKeiya Nobuta1-0/+1
If hub_activate() is called before D+ has stabilized after remote wakeup, the following situation might occur: __ ___________________ / \ / D+ __/ \__/ Hub _______________________________ | ^ ^ ^ | | | | Host _____v__|___|___________|______ | | | | | | | \-- Interrupt Transfer (*3) | | \-- ClearPortFeature (*2) | \-- GetPortStatus (*1) \-- Host detects remote wakeup - D+ goes high, Host starts running by remote wakeup - D+ is not stable, goes low - Host requests GetPortStatus at (*1) and gets the following hub status: - Current Connect Status bit is 0 - Connect Status Change bit is 1 - D+ stabilizes, goes high - Host requests ClearPortFeature and thus Connect Status Change bit is cleared at (*2) - After waiting 100 ms, Host starts the Interrupt Transfer at (*3) - Since the Connect Status Change bit is 0, Hub returns NAK. In this case, port_event() is not called in hub_event() and Host cannot recognize device. To solve this issue, flag change_bits even if only Connect Status Change bit is 1 when got in the first GetPortStatus. This issue occurs rarely because it only if D+ changes during a very short time between GetPortStatus and ClearPortFeature. However, it is fatal if it occurs in embedded system. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200109051448.28150-1-nobuta.keiya@fujitsu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"Kevin Hao2-57/+107
This reverts commit a7fc89f9d5fcc10a5474cfe555f5a9e5df8b0f1f because there are some bugs in this commit, and we don't have a simple way to fix these bugs. So revert this commit to make the thunderx gpio work on the stable kernel at least. We will switch to GPIOLIB_IRQCHIP for thunderx gpio by following patches. Fixes: a7fc89f9d5fc ("gpio: thunderx: Switch to GPIOLIB_IRQCHIP") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20200114082821.14015-2-haokexin@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes in the upper drivers (so both fairly core), one in enclosures, which fixes replugging a device into an enclosure slot and one in the disk driver which fixes revalidating a drive with protection information (PI) to make it a non-PI drive ... previously we were still remembering the old PI state. Both fixed issues are quite rare in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: enclosure: Fix stale device oops with hot replug scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
2020-01-14lkdtm/bugs: fix build error in lkdtm_UNSET_SMEPBrendan Higgins1-1/+1
When building ARCH=um with CONFIG_UML_X86=y and CONFIG_64BIT=y we get the build errors: drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_UNSET_SMEP’: drivers/misc/lkdtm/bugs.c:288:8: error: implicit declaration of function ‘native_read_cr4’ [-Werror=implicit-function-declaration] cr4 = native_read_cr4(); ^~~~~~~~~~~~~~~ drivers/misc/lkdtm/bugs.c:290:13: error: ‘X86_CR4_SMEP’ undeclared (first use in this function); did you mean ‘X86_FEATURE_SMEP’? if ((cr4 & X86_CR4_SMEP) != X86_CR4_SMEP) { ^~~~~~~~~~~~ X86_FEATURE_SMEP drivers/misc/lkdtm/bugs.c:290:13: note: each undeclared identifier is reported only once for each function it appears in drivers/misc/lkdtm/bugs.c:297:2: error: implicit declaration of function ‘native_write_cr4’; did you mean ‘direct_write_cr4’? [-Werror=implicit-function-declaration] native_write_cr4(cr4); ^~~~~~~~~~~~~~~~ direct_write_cr4 So specify that this block of code should only build when CONFIG_X86_64=y *AND* CONFIG_UML is unset. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20191213003522.66450-1-brendanhiggins@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14lkdtm/bugs: Make double-fault test always availableKees Cook1-4/+6
Adjust the DOUBLE_FAULT test to always be available (so test harnesses don't have to make exceptions more missing tests), and for the arch-specific tests to "XFAIL" so that test harnesses can reason about expected vs unexpected failures. Fixes: b09511c253e5 ("lkdtm: Add a DOUBLE_FAULT crash type on x86") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/202001021226.751D3F869D@keescook Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14coresight: etm4x: Fix unused function warningArnd Bergmann1-7/+6
Some of the newly added code in the etm4x driver is inside of an #ifdef, and some other code is outside of it, leading to a harmless warning when CONFIG_CPU_PM is disabled: drivers/hwtracing/coresight/coresight-etm4x.c:68:13: error: 'etm4_os_lock' defined but not used [-Werror=unused-function] static void etm4_os_lock(struct etmv4_drvdata *drvdata) ^~~~~~~~~~~~ To avoid the warning and simplify the the #ifdef checks, use IS_ENABLED() instead, so the compiler can drop the unused functions without complaining. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Fixed capital 'f' in title] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191213223107.1484-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14USB: serial: opticon: fix control-message timeoutsJohan Hovold1-1/+1
The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable <stable@vger.kernel.org> # 2.6.39 Cc: Martin Jansen <martin.jansen@opticon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-13Merge tag 'Intel-CVE-2019-14615' from bundle by Akeem Abodunrin.Linus Torvalds1-0/+8
Merge Intel Gen9 graphics fix from Akeem Abodunrin: "Insufficient control flow in certain data structures for some Intel Processors with Intel Processor Graphics may allow an unauthenticated user to potentially enable information disclosure via local access This provides mitigation for Gen9 hardware. Note that Gen8 is not impacted due to a previously implemented workaround. The mitigation involves using an existing hardware feature to forcibly clear down all EU state at each context switch" * tag 'Intel-CVE-2019-14615' of emailed bundle from Akeem G Abodunrin <akeem.g.abodunrin@intel.com>: drm/i915/gen9: Clear residual context state on context switch
2020-01-13Merge tag 'sunxi-clk-fixes-for-5.5' of ↵Stephen Boyd5-37/+12
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clk fixes from Maxime Ripard: Our usual set of fixes for Allwinner, to fix the number of reported clocks on the v3s, fixing the external clock on the R40, and some fixes for the AR100 co-processor clocks. * tag 'sunxi-clk-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
2020-01-13irqchip/ingenic: Get rid of the legacy IRQ domainPaul Cercueil1-4/+2
Get rid of the legacy IRQ domain and hardcoded IRQ base, since all the Ingenic drivers and platform code have been updated to use devicetree. This also fixes the kernel being flooded with messages like: irq: interrupt-controller@10001000 didn't like hwirq-0x0 to VIRQ8 mapping (rc=-19) Fixes: 8bc7464b5140 ("irqchip: ingenic: Alloc generic chips from IRQ domain"). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200113163329.34282-2-paul@crapouillou.net
2020-01-13USB: serial: option: Add support for Quectel RM500QKristian Evensen1-0/+4
RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. Unlike other recent Quectel modems, it is possible to identify the diagnostic interface (bInterfaceProtocol is unique). Thus, there is no need to check for the number of endpoints or reserve interfaces. The interface number is still dynamic though, so matching on interface number is not possible and two entries have to be added to the table. Output from usb-devices with all interfaces enabled (order is diag, nmea, at_port, modem, rmnet and adb): Bus 004 Device 007: ID 2c7c:0800 Quectel Wireless Solutions Co., Ltd. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd. idProduct 0x0800 bcdDevice 4.14 iManufacturer 1 Quectel iProduct 2 LTE-A Module iSerial 3 40046d60 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 328 bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 DIAG_SER_RMNET bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 224mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 CDEV Serial Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 6 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 42 bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 1 micro seconds bU2DevExitLat 500 micro seconds ** UNRECOGNIZED: 14 10 0a 00 01 00 00 00 00 11 00 00 30 40 0a 00 b0 40 0a 00 Device Status: 0x0000 (Bus Powered) Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-13USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xxJerónimo Borque1-0/+2
Add device-ids for the Motorola Solutions TETRA radios MTP3xxx series and MTP85xx series $ lsusb -vd 0cad: Bus 001 Device 009: ID 0cad:9015 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9015 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Bus 001 Device 010: ID 0cad:9013 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9013 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-13iio: light: vcnl4000: Fix scale for vcnl4040Guido Günther1-1/+2
According to the data sheet the ambient sensor's scale is 0.12 lux/step (not 0.024 lux/step as used by vcnl4200) when the integration time is 80ms. The integration time is currently hardcoded in the driver to that value. See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: buffer: align the size of scan bytes to size of the largest elementLars Möllendorf1-1/+5
Previous versions of `iio_compute_scan_bytes` only aligned each element to its own length (i.e. its own natural alignment). Because multiple consecutive sets of scan elements are buffered this does not work in case the computed scan bytes do not align with the natural alignment of the first scan element in the set. This commit fixes this by aligning the scan bytes to the natural alignment of the largest scan element in the set. Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars Möllendorf <lars.moellendorf@plating.de> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: chemical: pms7003: fix unmet triggered buffer dependencyTomasz Duszynski1-0/+1
IIO triggered buffer depends on IIO buffer which is missing from Kconfig file. This should go unnoticed most of the time because there's a chance something else has already enabled buffers. In some rare cases though one might experience kbuild warnings about unmet direct dependencies and build failures due to missing symbols. Fix this by selecting IIO_BUFFER explicitly. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_IDStephan Gerhold1-1/+2
At the moment, attempting to probe a device with ST_LSM6DS3_ID (e.g. using the st,lsm6ds3 compatible) fails with: st_lsm6dsx_i2c 1-006b: unsupported whoami [69] ... even though 0x69 is the whoami listed for ST_LSM6DS3_ID. This happens because st_lsm6dsx_check_whoami() also attempts to match unspecified (zero-initialized) entries in the "id" array. ST_LSM6DS3_ID = 0 will therefore match any entry in st_lsm6dsx_sensor_settings (here: the first), because none of them actually have all 12 entries listed in the "id" array. Avoid this by additionally checking if "name" is set, which is only set for valid entries in the "id" array. Note: Although the problem was introduced earlier it did not surface until commit 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings. Fixes: d068e4a0f921 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings") Cc: <stable@vger.kernel.org> # 5.4 Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: adc: ad7124: Fix DT channel configurationAlexandru Tachici1-7/+5
This patch fixes device tree channel configuration. ad7124 driver reads channels configuration from the device tree. It expects to find channel specifications as child nodes. Before this patch ad7124 driver assumed that the child nodes are parsed by for_each_available_child_of_node in the order 0,1,2,3... This is wrong and the real order of the children can be seen by running: dtc -I fs /sys/firmware/devicetree/base on the machine. For example, running this on an rpi 3B+ yields the real children order: 4,2,0,7,5,3,1,6 Before this patch the driver assigned the channel configuration like this: - 0 <- 4 - 1 <- 2 - 2 <- 0 ........ For example, the symptoms can be observed by connecting the 4th channel to a 1V tension and then reading the in_voltage0-voltage19_raw sysfs (multiplied of course by the scale) one would see that channel 0 measures 1V and channel 4 measures only noise. Now the driver uses the reg property of each child in order to correctly identify to which channel the parsed configuration belongs to. Fixes b3af341bbd966: ("iio: adc: Add ad7124 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13cpuidle: teo: Fix intervals[] array indexing bugIkjoon Jang1-1/+1
Fix a simple bug in rotating array index. Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems") Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0Jian-Hong Pan1-7/+1
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to brightness 0. According to ASUS' information, the brightness should be 0x80 ~ 0x83. This patch fixes it by following the logic. Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support") Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-23 03:49:53 +0000