summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-12-10firmware_loader: remove #include <generated/utsrelease.h>Thomas Weißschuh1-2/+0
utsrelease.h is potentially generated on each build. By removing this unused include we can get rid of some spurious recompilations. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-19Merge tag 'scsi-fixes' of ↵Linus Torvalds5-19/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five small fixes, all in drivers. Most of these are error leg freeing issues, with the only really user visible one being the zfcp fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix possible memory leak when device_register() failed scsi: zfcp: Fix double free of FSF request when qdio send fails scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper() scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus() scsi: mpi3mr: Suppress command reply debug prints
2022-11-19Merge tag 'iommu-fixes-v6.1-rc5' of ↵Linus Torvalds2-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Preset accessed bits in Intel VT-d page-directory entries to avoid hardware error - Set supervisor bit only when Intel IOMMU has the SRS capability * tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Set SRE bit only when hardware has SRS cap iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
2022-11-19iommu/vt-d: Set SRE bit only when hardware has SRS capTina Zhang1-2/+3
SRS cap is the hardware cap telling if the hardware IOMMU can support requests seeking supervisor privilege or not. SRE bit in scalable-mode PASID table entry is treated as Reserved(0) for implementation not supporting SRS cap. Checking SRS cap before setting SRE bit can avoid the non-recoverable fault of "Non-zero reserved field set in PASID Table Entry" caused by setting SRE bit while there is no SRS cap support. The fault messages look like below: DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000 [fault reason 0x5a] SM: Non-zero reserved field set in PASID Table Entry Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface") Cc: stable@vger.kernel.org Signed-off-by: Tina Zhang <tina.zhang@intel.com> Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-19iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entriesTina Zhang1-5/+3
The A/D bits are preseted for IOVA over first level(FL) usage for both kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED). Presetting A bit in FL requires to preset the bit in every related paging entries, including the non-leaf ones. Otherwise, hardware may treat this as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might occur with below DMAR fault messages (wrapped for line length) dumped. DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000 [fault reason 0x90] SM: A/D bit update needed in first-level entry when set up in no snoop Fixes: 289b3b005cb9 ("iommu/vt-d: Preset A/D bits for user space DMA usage") Cc: stable@vger.kernel.org Signed-off-by: Tina Zhang <tina.zhang@intel.com> Link: https://lore.kernel.org/r/20221113010324.1094483-1-tina.zhang@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20221116051544.26540-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-18Merge tag 'input-for-v6.1-rc5' of ↵Linus Torvalds6-13/+33
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for 8042 to stop leaking platform device on unload - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we need to reset controller to load config from firmware - a workaround for Acer Switch to avoid interrupt storm from home and power buttons - a workaround for more ASUS ZenBook models to detect keyboard controller - a fix for iforce driver to properly handle communication errors - touchpad on HP Laptop 15-da3001TU switched to RMI mode * tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix leaking of platform device on module removal Input: i8042 - apply probe defer to more ASUS ZenBook models Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[] Input: soc_button_array - add use_low_level_irq module parameter Input: iforce - invert valid length check when fetching device IDs Input: goodix - try resetting the controller when no config is set dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
2022-11-18Input: i8042 - fix leaking of platform device on module removalChen Jun1-4/+0
Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload. Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support") Signed-off-by: Chen Jun <chenjun102@huawei.com> Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-18Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linuxLinus Torvalds6-2/+11
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - Memory leak fix in nvmet (Sagi Grimberg) - Regression fix for block cgroups pinning the wrong blkcg, causing leaks of cgroups and blkcgs (Chris) - UAF fix for drbd setup error handling (Dan) - Fix DMA alignment propagation in DM (Keith) * tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux: dm-log-writes: set dma_alignment limit in io_hints dm-integrity: set dma_alignment limit in io_hints block: make blk_set_default_limits() private dm-crypt: provide dma_alignment limit in io_hints block: make dma_alignment a stacking queue_limit nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 drbd: use after free in drbd_create_device() nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro blk-cgroup: properly pin the parent in blkcg_css_online
2022-11-18Merge tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds37-116/+310
Pull drm fixes from Dave Airlie: "I guess the main question is are things settling down, and I'd say kinda, these are all pretty small fixes, nothing big stands out really, just seems to be quite a few of them. Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits. core: - Fix potential memory leak in drm_dev_init() - Fix potential null-ptr-deref in drm_vblank_destroy_worker() - Revert hiding unregistered connectors from userspace, as it breaks on DP-MST - Add workaround for DP++ dual mode adaptors that don't support i2c subaddressing i915: - Fix uaf with lmem_userfault_list handling amdgpu: - gang submit fixes - Fix a possible memory leak in ganng submit error path - DP tunneling fixes - DCN 3.1 page flip fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - Don't expose degamma on hardware that doesn't support it - BACO fixes for SMU 11.x - BACO fixes for SMU 13.x - Virtual display fix for devices with no display hardware amdkfd: - Memory limit regression fix tegra: - tegra20 GART fix vc4: - Fix error handling in vc4_atomic_commit_tail() lima: - Set lima's clkname corrrectly when regulator is missing panel: - Set bpc for logictechno panels" * tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits) gpu: host1x: Avoid trying to use GART on Tegra20 drm/display: Don't assume dual mode adaptors support i2c sub-addressing drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround drm/amd/pm: enable runpm support over BACO for SMU13.0.7 drm/amd/pm: enable runpm support over BACO for SMU13.0.0 drm/amdgpu: there is no vbios fb on devices with no display hw (v2) drm/amdkfd: Fix a memory limit issue drm/amdgpu: disable BACO support on more cards drm/amd/display: don't enable DRM CRTC degamma property for DCE drm/amd/display: Set max for prefetch lines on dcn32 drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32 drm/amd/display: Fix prefetch calculations for dcn32 drm/amd/display: Fix optc2_configure warning on dcn314 drm/amd/display: Fix calculation for cursor CAB allocation Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL" drm/amd/display: Support parsing VRAM info v3.0 from VBIOS drm/amd/display: Fix invalid DPIA AUX reply causing system hang drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo drm/amd/display: Add HUBP surface flip interrupt handler drm/amd/display: Fix access timeout to DPIA AUX at boot time ...
2022-11-18Merge tag 's390-6.1-5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Fix deadlock in discontiguous saved segments (DCSS) block device driver. When adding a disk and scanning partitions the scan would not break out early without a missed flag. - Avoid using global register variable for current_stack_pointer due to an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken code is generated, which leads to stack corruptions. * tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: avoid using global register for current_stack_pointer s390/dcssblk: fix deadlock when adding a DCSS
2022-11-18Merge tag 'for-6.1/dm-fixes-2' of ↵Linus Torvalds3-8/+18
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix misbehavior if list_versions DM ioctl races with module loading - Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed - Allow DM integrity devices to be activated in read-only mode * tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: clear the journal on suspend dm integrity: flush the journal on suspend dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed dm ioctl: fix misbehavior if list_versions races with module loading
2022-11-19Merge tag 'drm/tegra/for-6.1-rc6' of ↵Dave Airlie2-0/+8
https://gitlab.freedesktop.org/drm/tegra into drm-fixes drm/tegra: Fixes for v6.1-rc6 This contains a single fix that avoids using the GART on Tegra20 because it doesn't work well with the way the Tegra DRM driver tries to use it. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118121614.3511110-1-thierry.reding@gmail.com
2022-11-18Merge tag 'usb-6.1-rc6' of ↵Linus Torvalds11-51/+90
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of USB driver fixes and new device ids for 6.1-rc6. Included in here are: - new usb-serial device ids - dwc3 driver fixes for reported problems - cdns3 driver fixes - new USB device quirks - typec driver fixes - extcon USB typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: option: add u-blox LARA-L6 modem USB: serial: option: add u-blox LARA-R6 00B modem USB: serial: option: remove old LARA-R6 PID USB: serial: option: add Fibocom FM160 0x0111 composition usb: add NO_LPM quirk for Realforce 87U Keyboard usb: cdns3: host: fix endless superspeed hub port reset usb: chipidea: fix deadlock in ci_otg_del_timer usb: dwc3: Do not get extcon device when usb-role-switch is used usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler usb: typec: mux: Enter safe mode only when pins need to be reconfigured extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered Revert "usb: dwc3: disable USB core PHY management" usb: dwc3: gadget: Return -ESHUTDOWN on ep disable USB: bcma: Make GPIO explicitly optional USB: serial: option: add Sierra Wireless EM9191
2022-11-18Merge tag 'staging-6.1-rc6' of ↵Linus Torvalds1-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 6.1-rc6. It resolves a bogus signed character test as pointed out, and fixed by, Jason in the rtl8192e driver It has been in linux-next for a few weeks now with no reported problems" * tag 'staging-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8192e: remove bogus ssid character sign test
2022-11-18Merge tag 'tty-6.1-rc6' of ↵Linus Torvalds6-88/+136
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 6.1-rc6. They all resolve reported problems: - kernel doc build problems with the -rc1 serial driver documentation update - n_gsm reported problems - imx serial driver missing callback - lots of tiny 8250 driver fixes for reported issues. All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c serial: 8250: Flush DMA Rx on RLSI serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake serial: 8250_lpss: Configure DMA also w/o DMA filter serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send Revert "tty: n_gsm: replace kicktimer with delayed_work" Revert "tty: n_gsm: avoid call of sleeping functions from atomic context" serial: imx: Add missing .thaw_noirq hook tty: serial: fsl_lpuart: don't break the on-going transfer when global reset serial: 8250: omap: Flush PM QOS work on remove serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
2022-11-18Merge tag 'char-misc-6.1-rc6' of ↵Linus Torvalds20-72/+108
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.1-rc6 to resolve some reported problems. Included in here are: - iio driver fixes - binder driver fix - nvmem driver fix - vme_vmci information leak fix - parport fix - slimbus configuration fix - coreboot firmware bugfix - speakup build fix and crash fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits) firmware: coreboot: Register bus in module init nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m docs: update mediator contact information in CoC doc slimbus: stream: correct presence rate frequencies nvmem: lan9662-otp: Fix compatible string binder: validate alloc->mm in ->mmap() handler parport_pc: Avoid FIFO port location truncation siox: fix possible memory leak in siox_device_add() misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram() speakup: replace utils' u_char with unsigned char speakup: fix a segfault caused by switching consoles tools: iio: iio_generic_buffer: Fix read size iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler() iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger() iio: adc: mp2629: fix potential array out of bound access iio: adc: mp2629: fix wrong comparison of channel iio: pressure: ms5611: changed hardcoded SPI speed to value limited iio: pressure: ms5611: fixed value compensation bug iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID. ...
2022-11-18Merge tag 'mmc-v6.1-rc5' of ↵Linus Torvalds3-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fixup VDD/VMMC voltage-range negotiation MMC host: - sdhci-pci: Fix memory leak by adding a missing pci_dev_put() - sdhci-pci-o2micro: Fix card detect by tuning the debounce timeout" * tag 'mmc-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put() mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout mmc: core: properly select voltage range without power cycle
2022-11-18dm integrity: clear the journal on suspendMikulas Patocka1-0/+13
There was a problem that a user burned a dm-integrity image on CDROM and could not activate it because it had a non-empty journal. Fix this problem by flushing the journal (done by the previous commit) and clearing the journal (done by this commit). Once the journal is cleared, dm-integrity won't attempt to replay it on the next activation. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18dm integrity: flush the journal on suspendMikulas Patocka1-6/+1
This commit flushes the journal on suspend. It is prerequisite for the next commit that enables activating dm integrity devices in read-only mode. Note that we deliberately didn't flush the journal on suspend, so that the journal replay code would be tested. However, the dm-integrity code is 5 years old now, so that journal replay is well-tested, and we can make this change now. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18dm bufio: Fix missing decrement of no_sleep_enabled if ↵Zhihao Cheng1-0/+2
dm_bufio_client_create failed The 'no_sleep_enabled' should be decreased in error handling path in dm_bufio_client_create() when the DM_BUFIO_CLIENT_NO_SLEEP flag is set, otherwise static_branch_unlikely() will always return true even if no dm_bufio_client instances have DM_BUFIO_CLIENT_NO_SLEEP flag set. Cc: stable@vger.kernel.org Fixes: 3c1c875d0586 ("dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18dm ioctl: fix misbehavior if list_versions races with module loadingMikulas Patocka1-2/+2
__list_versions will first estimate the required space using the "dm_target_iterate(list_version_get_needed, &needed)" call and then will fill the space using the "dm_target_iterate(list_version_get_info, &iter_info)" call. Each of these calls locks the targets using the "down_read(&_lock)" and "up_read(&_lock)" calls, however between the first and second "dm_target_iterate" there is no lock held and the target modules can be loaded at this point, so the second "dm_target_iterate" call may need more space than what was the first "dm_target_iterate" returned. The code tries to handle this overflow (see the beginning of list_version_get_info), however this handling is incorrect. The code sets "param->data_size = param->data_start + needed" and "iter_info.end = (char *)vers+len" - "needed" is the size returned by the first dm_target_iterate call; "len" is the size of the buffer allocated by userspace. "len" may be greater than "needed"; in this case, the code will write up to "len" bytes into the buffer, however param->data_size is set to "needed", so it may write data past the param->data_size value. The ioctl interface copies only up to param->data_size into userspace, thus part of the result will be truncated. Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this guarantees that the second "dm_target_iterate" call will write only up to the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it overflows the "needed" space - in this case, userspace will allocate a larger buffer and retry. Note that there is also a bug in list_version_get_needed - we need to add "strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18Merge tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme into block-6.1Jens Axboe2-0/+6
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - memory leak fix in nvmet (Sagi Grimberg)" * tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme: nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
2022-11-18gpu: host1x: Avoid trying to use GART on Tegra20Robin Murphy2-0/+8
Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with bus") quite some time ago, the GART driver has effectively disabled itself to avoid issues with the GPU driver expecting it to work in ways that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to IOMMU device registration") that bodge no longer works, but really the GPU driver should be responsible for its own behaviour anyway. Make the workaround explicit. Reported-by: Jon Hunter <jonathanh@nvidia.com> Suggested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-11-18Merge tag 'amd-drm-fixes-6.1-2022-11-16' of ↵Dave Airlie26-69/+235
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-11-16: amdgpu: - Fix a possible memory leak in ganng submit error path - DP tunneling fixes - DCN 3.1 page flip fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - Don't expose degamma on hardware that doesn't support it - BACO fixes for SMU 11.x - BACO fixes for SMU 13.x - Virtual display fix for devices with no display hardware amdkfd: - Memory limit regression fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117040416.6100-1-alexander.deucher@amd.com
2022-11-18Merge tag 'drm-intel-fixes-2022-11-17' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix uaf with lmem_userfault_list handling (Matthew Auld) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3X2bNJ/4GR1BAiG@tursulin-desk
2022-11-17Merge tag 'soc-fixes-6.1-3' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of devicetree and code changes for SoC platforms, notably: - DT schema warning fixes for i.MX - Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP - MAINTAINERS updates for Hisilicon and RISC-V, documenting which RISC-V SoC specific patches will now get merged through the SoC tree in the future. - A code fix for at91 suspend, to work around broken hardware - A devicetree fix for lan966x/pcb8291 LED support - Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems like incorrect register sizes and schema warnings. One fix makes the UFS controller work on sc8280xp, and six fixes address the same regulator problem in a variety of platforms" * tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) MAINTAINERS: repair Microchip corei2c driver entry MAINTAINERS: add an entry for StarFive devicetrees MAINTAINERS: generify the Microchip RISC-V entry name MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees MAINTAINERS: git://github.com -> https://github.com for HiSilicon soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR ARM: at91: pm: avoid soft resetting AC DLL ARM: dts: lan966x: Enable sgpio on pcb8291 arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state ARM: dts: at91: sama7g5: fix signal name of pin PB2 arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280 arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers ...
2022-11-18Merge tag 'drm-misc-fixes-2022-11-17' of ↵Dave Airlie9-44/+64
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.1-rc6: - Fix error handling in vc4_atomic_commit_tail() - Set bpc for logictechno panels. - Fix potential memory leak in drm_dev_init() - Fix potential null-ptr-deref in drm_vblank_destroy_worker() - Set lima's clkname corrrectly when regulator is missing. - Small amdgpu fix to gang submission. - Revert hiding unregistered connectors from userspace, as it breaks on DP-MST. - Add workaround for DP++ dual mode adaptors that don't support i2c subaddressing. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c7d02936-c550-199b-6cb7-cbf6cf104e4a@linux.intel.com
2022-11-17Merge tag 'usb-serial-6.1-rc6' of ↵Greg Kroah-Hartman1-2/+17
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.1-rc6 Here are some new modem device ids for 6.1. All have been in linux-next with no reported issues." * tag 'usb-serial-6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add u-blox LARA-L6 modem USB: serial: option: add u-blox LARA-R6 00B modem USB: serial: option: remove old LARA-R6 PID USB: serial: option: add Fibocom FM160 0x0111 composition USB: serial: option: add Sierra Wireless EM9191
2022-11-17scsi: iscsi: Fix possible memory leak when device_register() failedZhou Guanghui1-15/+16
If device_register() returns error, the name allocated by the dev_set_name() need be freed. As described in the comment of device_register(), we should use put_device() to give up the reference in the error path. Fix this by calling put_device(), the name will be freed in the kobject_cleanup(), and this patch modified resources will be released by calling the corresponding callback function in the device_release(). Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com> Link: https://lore.kernel.org/r/20221110033729.1555-1-zhouguanghui1@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: zfcp: Fix double free of FSF request when qdio send failsBenjamin Block1-1/+1
We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache the FSF request ID when sending a new FSF request. This is used in case the sending fails and we need to remove the request from our internal hash table again (so we don't keep an invalid reference and use it when we free the request again). In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32 bit wide), but the rest of the zfcp code (and the firmware specification) handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x ELF ABI]). For one this has the obvious problem that when the ID grows past 32 bit (this can happen reasonably fast) it is truncated to 32 bit when storing it in the cache variable and so doesn't match the original ID anymore. The second less obvious problem is that even when the original ID has not yet grown past 32 bit, as soon as the 32nd bit is set in the original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we cast it back to 'unsigned long'. As the cached variable is of a signed type, the compiler will choose a sign-extending instruction to load the 32 bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the request again all the leading zeros will be flipped to ones to extend the sign and won't match the original ID anymore (this has been observed in practice). If we can't successfully remove the request from the hash table again after 'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify the adapter about new work because the adapter is already gone during e.g. a ChpID toggle) we will end up with a double free. We unconditionally free the request in the calling function when 'zfcp_fsf_req_send()' fails, but because the request is still in the hash table we end up with a stale memory reference, and once the zfcp adapter is either reset during recovery or shutdown we end up freeing the same memory twice. The resulting stack traces vary depending on the kernel and have no direct correlation to the place where the bug occurs. Here are three examples that have been seen in practice: list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:62! monitor event: 0040 ilc:2 [#1] PREEMPT SMP Modules linked in: ... CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded Hardware name: ... Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6 0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8 00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800 00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70 Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336 00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8 #00000003cbeea1f4: af000000 mc 0,0 >00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78 00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48 00000003cbeea204: b9040043 lgr %r4,%r3 00000003cbeea208: b9040051 lgr %r5,%r1 00000003cbeea20c: b9040032 lgr %r3,%r2 Call Trace: [<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140 ([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140) [<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp] [<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp] [<000003ff7ff4a22e>] zfcp_erp_strategy+0x21e/0xca0 [zfcp] [<000003ff7ff4ad34>] zfcp_erp_thread+0x84/0x1a0 [zfcp] [<00000003cb5eece8>] kthread+0x138/0x150 [<00000003cb557f3c>] __ret_from_fork+0x3c/0x60 [<00000003cc4172ea>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000003cc3e9d04>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 Fault in home space mode while using kernel ASCE. AS:0000000063b10007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 10 PID: 0 Comm: swapper/10 Kdump: loaded Hardware name: ... Krnl PSW : 0404d00180000000 000003ff7febaf8e (zfcp_fsf_reqid_check+0x86/0x158 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 5a6f1cfa89c49ac3 00000000aff2c4c8 6b6b6b6b6b6b6b6b 00000000000002a8 0000000000000000 0000000000000055 0000000000000000 00000000a8515800 0700000000000000 00000000a6e14500 00000000aff2c000 000000008003c44c 000000008093c700 0000000000000010 00000380009ebba8 00000380009ebb48 Krnl Code: 000003ff7febaf7e: a7f4003d brc 15,000003ff7febaff8 000003ff7febaf82: e32020000004 lg %r2,0(%r2) #000003ff7febaf88: ec2100388064 cgrj %r2,%r1,8,000003ff7febaff8 >000003ff7febaf8e: e3b020100020 cg %r11,16(%r2) 000003ff7febaf94: a774fff7 brc 7,000003ff7febaf82 000003ff7febaf98: ec280030007c cgij %r2,0,8,000003ff7febaff8 000003ff7febaf9e: e31020080004 lg %r1,8(%r2) 000003ff7febafa4: e33020000004 lg %r3,0(%r2) Call Trace: [<000003ff7febaf8e>] zfcp_fsf_reqid_check+0x86/0x158 [zfcp] [<000003ff7febbdbc>] zfcp_qdio_int_resp+0x6c/0x170 [zfcp] [<000003ff7febbf90>] zfcp_qdio_irq_tasklet+0xd0/0x108 [zfcp] [<0000000061d90a04>] tasklet_action_common.constprop.0+0xdc/0x128 [<000000006292f300>] __do_softirq+0x130/0x3c0 [<0000000061d906c6>] irq_exit_rcu+0xfe/0x118 [<000000006291e818>] do_io_irq+0xc8/0x168 [<000000006292d516>] io_int_handler+0xd6/0x110 [<000000006292d596>] psw_idle_exit+0x0/0xa ([<0000000061d3be50>] arch_cpu_idle+0x40/0xd0) [<000000006292ceea>] default_idle_call+0x52/0xf8 [<0000000061de4fa4>] do_idle+0xd4/0x168 [<0000000061de51fe>] cpu_startup_entry+0x36/0x40 [<0000000061d4faac>] smp_start_secondary+0x12c/0x138 [<000000006292d88e>] restart_int_handler+0x6e/0x90 Last Breaking-Event-Address: [<000003ff7febaf94>] zfcp_fsf_reqid_check+0x8c/0x158 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 523b05d3ae76a000 TEID: 523b05d3ae76a803 Fault in home space mode while using kernel ASCE. AS:0000000077c40007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 3 PID: 453 Comm: kworker/3:1H Kdump: loaded Hardware name: ... Workqueue: kblockd blk_mq_run_work_fn Krnl PSW : 0404d00180000000 0000000076fc0312 (__kmalloc+0xd2/0x398) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: ffffffffffffffff 523b05d3ae76abf6 0000000000000000 0000000000092a20 0000000000000002 00000007e49b5cc0 00000007eda8f000 0000000000092a20 00000007eda8f000 00000003b02856b9 00000000000000a8 523b05d3ae76abf6 00000007dd662000 00000007eda8f000 0000000076fc02b2 000003e0037637a0 Krnl Code: 0000000076fc0302: c004000000d4 brcl 0,76fc04aa 0000000076fc0308: b904001b lgr %r1,%r11 #0000000076fc030c: e3106020001a algf %r1,32(%r6) >0000000076fc0312: e31010000082 xg %r1,0(%r1) 0000000076fc0318: b9040001 lgr %r0,%r1 0000000076fc031c: e30061700082 xg %r0,368(%r6) 0000000076fc0322: ec59000100d9 aghik %r5,%r9,1 0000000076fc0328: e34003b80004 lg %r4,952 Call Trace: [<0000000076fc0312>] __kmalloc+0xd2/0x398 [<0000000076f318f2>] mempool_alloc+0x72/0x1f8 [<000003ff8027c5f8>] zfcp_fsf_req_create.isra.7+0x40/0x268 [zfcp] [<000003ff8027f1bc>] zfcp_fsf_fcp_cmnd+0xac/0x3f0 [zfcp] [<000003ff80280f1a>] zfcp_scsi_queuecommand+0x122/0x1d0 [zfcp] [<000003ff800b4218>] scsi_queue_rq+0x778/0xa10 [scsi_mod] [<00000000771782a0>] __blk_mq_try_issue_directly+0x130/0x208 [<000000007717a124>] blk_mq_request_issue_directly+0x4c/0xa8 [<000003ff801302e2>] dm_mq_queue_rq+0x2ea/0x468 [dm_mod] [<0000000077178c12>] blk_mq_dispatch_rq_list+0x33a/0x818 [<000000007717f064>] __blk_mq_do_dispatch_sched+0x284/0x2f0 [<000000007717f44c>] __blk_mq_sched_dispatch_requests+0x1c4/0x218 [<000000007717fa7a>] blk_mq_sched_dispatch_requests+0x52/0x90 [<0000000077176d74>] __blk_mq_run_hw_queue+0x9c/0xc0 [<0000000076da6d74>] process_one_work+0x274/0x4d0 [<0000000076da7018>] worker_thread+0x48/0x560 [<0000000076daef18>] kthread+0x140/0x160 [<000000007751d144>] ret_from_fork+0x28/0x30 Last Breaking-Event-Address: [<0000000076fc0474>] __kmalloc+0x234/0x398 Kernel panic - not syncing: Fatal exception: panic_on_oops To fix this, simply change the type of the cache variable to 'unsigned long', like the rest of zfcp and also the argument for 'zfcp_reqlist_find_rm()'. This prevents truncation and wrong sign extension and so can successfully remove the request from the hash table. Fixes: e60a6d69f1f8 ("[SCSI] zfcp: Remove function zfcp_reqlist_find_safe") Cc: <stable@vger.kernel.org> #v2.6.34+ Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Link: https://lore.kernel.org/r/979f6e6019d15f91ba56182f1aaf68d61bf37fc6.1668595505.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()Yuan Can1-1/+5
If device_register() fails in sdebug_add_host_helper(), it will goto clean and sdbg_host will be freed, but sdbg_host->host_list will not be removed from sdebug_host_list, then list traversal may cause UAF. Fix it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()Yang Yingliang1-1/+2
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need goto error label in this case. Fixes: 3703b2c5d041 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221115015042.3652261-1-yangyingliang@huawei.com Reviewed-by: Mike Christie <michael.chritie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: mpi3mr: Suppress command reply debug printsShin'ichiro Kawasaki1-1/+2
After it receives command reply, mpi3mr driver checks command result. If the result is not zero, it prints out command information. This debug information is confusing since they are printed even when the non-zero result is expected. "Power-on or device reset occurred" is printed for Test Unit Ready command at drive detection. Inquiry failure for unsupported VPD page header is also printed. They are harmless but look like failures. To avoid the confusion, print the command reply debug information only when the module parameter logging_level has value MPI3_DEBUG_SCSI_ERROR= 64, in same manner as mpt3sas driver. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20221111014449.1649968-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17Merge tag 'net-6.1-rc6' of ↵Linus Torvalds31-156/+303
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Current release - regressions: - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init() Previous releases - regressions: - bridge: fix memory leaks when changing VLAN protocol - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims - dsa: don't leak tagger-owned storage on switch driver unbind - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6 is removed - eth: stmmac: ensure tx function is not running in stmmac_xdp_release() - eth: hns3: fix return value check bug of rx copybreak Previous releases - always broken: - kcm: close race conditions on sk_receive_queue - bpf: fix alignment problem in bpf_prog_test_run_skb() - bpf: fix writing offset in case of fault in strncpy_from_kernel_nofault - eth: macvlan: use built-in RCU list checking - eth: marvell: add sleep time after enabling the loopback bit - eth: octeon_ep: fix potential memory leak in octep_device_setup() Misc: - tcp: configurable source port perturb table size - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)" * tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: use struct_group to copy ip/ipv6 header addresses net: usb: smsc95xx: fix external PHY reset net: usb: qmi_wwan: add Telit 0x103a composition netdevsim: Fix memory leak of nsim_dev->fa_cookie tcp: configurable source port perturb table size l2tp: Serialize access to sk_user_data with sk_callback_lock net: thunderbolt: Fix error handling in tbnet_init() net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() net: dsa: don't leak tagger-owned storage on switch driver unbind net/x25: Fix skb leak in x25_lapb_receive_frame() net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open() bridge: switchdev: Fix memory leaks when changing VLAN protocol net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process net: hns3: fix return value check bug of rx copybreak net: hns3: fix incorrect hw rss hash type of rx packet net: phy: marvell: add sleep time after enabling the loopback bit net: ena: Fix error handling in ena_init() kcm: close race conditions on sk_receive_queue net: ionic: Fix error handling in ionic_init_module() ...
2022-11-17net: usb: smsc95xx: fix external PHY resetAlexandru Tachici1-4/+42
An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: qmi_wwan: add Telit 0x103a compositionEnrico Sau1-0/+1
Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-16dm-log-writes: set dma_alignment limit in io_hintsKeith Busch1-0/+1
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-6-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm-integrity: set dma_alignment limit in io_hintsKeith Busch1-0/+1
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-5-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm-crypt: provide dma_alignment limit in io_hintsKeith Busch1-0/+1
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Link: https://lore.kernel.org/linux-block/20221101001558.648ee024@xps.demsh.org/ Fixes: b1a000d3b8ec5 ("block: relax direct io memory alignment") Reportred-by: Eric Biggers <ebiggers@kernel.org> Reported-by: Dmitrii Tcvetkov <me@demsh.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16Merge tag 'imx-fixes-6.1-2' of ↵Arnd Bergmann1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, 2nd round: - Switch to usb-role-switch for fixing USB device mode on tqma8mqml-mba8mx board, so that Dual Role is fully functional. - A series from Marek Vasut to fix dt-schema warning caused by NAND controller size-cells. - Fix file permission of imx93-pinfunc header. - Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang issue. * tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR Link: https://lore.kernel.org/r/20221116090402.GA1274@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-16netdevsim: Fix memory leak of nsim_dev->fa_cookieWang Yufen1-0/+1
kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Cc: Jiri Pirko <jiri@mellanox.com> Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16Merge tag 'for-linus-6.1-rc6-tag' of ↵Linus Torvalds3-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two trivial cleanups, and three simple fixes" * tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/platform-pci: use define instead of literal number xen/platform-pci: add missing free_irq() in error path xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too xen/pcpu: fix possible memory leak in register_pcpu() x86/xen: Use kstrtobool() instead of strtobool()
2022-11-16Merge tag 'pinctrl-v6.1-4' of ↵Linus Torvalds26-7/+103
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Aere is a hopefully final round of pin control fixes. Nothing special, driver fixes and we caught a potential NULL pointer exception. - Fix a potential NULL dereference in the core! - Fix all pin mux routes in the Rockchop PX30 driver - Fix the UFS pins in the Qualcomm SC8280XP driver - Fix bias disabling in the Mediatek driver - Fix debounce time settings in the Mediatek driver" * tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mediatek: Export debounce time tables pinctrl: mediatek: Fix EINT pins input debounce time configuration pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE pinctrl: qcom: sc8280xp: Rectify UFS reset pins pinctrl: rockchip: list all pins in a possible mux route for PX30
2022-11-16Merge tag 'platform-drivers-x86-v6.1-4' of ↵Linus Torvalds9-8/+124
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this is just a few hw-id additions) - A couple of other hw-id / DMI-quirk additions - A few small bug fixes + 1 build fix * tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops platform/x86: hp-wmi: Ignore Smart Experience App event platform/surface: aggregator_registry: Add support for Surface Laptop 5 platform/surface: aggregator_registry: Add support for Surface Pro 9 platform/surface: aggregator: Do not check for repeated unsequenced packets platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017) platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr() platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type platform/x86/amd: pmc: Add new ACPI ID AMDI0009 platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks
2022-11-16USB: serial: option: add u-blox LARA-L6 modemDavide Tronchin1-0/+8
Add LARA-L6 PIDs for three different USB compositions. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In default mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> [ johan: drop PID defines in favour of comments ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-16USB: serial: option: add u-blox LARA-R6 00B modemDavide Tronchin1-0/+2
The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not implement a QMI interface on port 4, the reservation (RSVD(4)) has been added to meet other companies that implement QMI on that interface. LARA-R6 00B USB composition exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-16USB: serial: option: remove old LARA-R6 PIDDavide Tronchin1-2/+1
Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final product uses a new USB composition with different PID. 0x90fa PID used only by LARA-R6 internal prototypes. Move 0x90fa PID directly in the option_ids array since used by other Qualcomm based modem vendors as pointed out in: https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-16mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()Xiongfeng Wang1-0/+2
pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before amd_probe() returns. There is no problem for the 'smbus_dev == NULL' branch because pci_dev_put() can also handle the NULL input parameter case. Fixes: 659c9bc114a8 ("mmc: sdhci-pci: Build o2micro support in the same module") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-11-16mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce ↵Chevron Li1-0/+7
timeout The SD card is recognized failed sometimes when resume from suspend. Because CD# debounce time too long then card present report wrong. Finally, card is recognized failed. Signed-off-by: Chevron Li <chevron.li@bayhubtech.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-11-16mmc: core: properly select voltage range without power cycleYann Gautier1-1/+7
In mmc_select_voltage(), if there is no full power cycle, the voltage range selected at the end of the function will be on a single range (e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V), the mask shift should be reduced by 1. This issue was triggered by using a specific SD-card (Verbatim Premium 16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes and there is no power cycle. And the card was failing to switch to high-speed mode. When adding the range 3.2V/3.3V for this card with the proposed shift change, the card can switch to high-speed mode. Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-21 20:49:24 +0000