summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas452-2976/+5111
Conflicts: drivers/nvme/host/pci.c
2016-08-01Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', ↵Bjorn Helgaas7-35/+1064
'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next * pci/host-aardvark: arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller * pci/host-altera: PCI: altera: Poll for link up status after retraining the link PCI: altera: Check link status before retrain link PCI: altera: Reorder read/write functions * pci/host-dra7xx: PCI: dra7xx: Fix return value in case of error * pci/host-hv: PCI: hv: Fix interrupt cleanup path PCI: hv: Handle all pending messages in hv_pci_onchannelcallback() PCI: hv: Don't leak buffer in hv_pci_onchannelcallback() * pci/host-vmd: x86/PCI: VMD: Separate MSI and MSI-X vector sharing x86/PCI: VMD: Use x86_vector_domain as parent domain x86/PCI: VMD: Use lock save/restore in interrupt enable path x86/PCI: VMD: Initialize list item in IRQ disable x86/PCI: VMD: Select device dma ops to override * pci/host-xilinx: PCI: xilinx: Fix return value in case of error Manually apply changes from pci/demodularize-hosts and pci/host-request-windows to drivers/pci/host/pci-aardvark.c
2016-08-01Merge branch 'pci/host-tegra' into nextBjorn Helgaas1-30/+25
* pci/host-tegra: PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values PCI: tegra: Program PADS_REFCLK_CFG* always, not just on legacy SoCs PCI: tegra: Stop setting pcibios_min_mem PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one PCI: tegra: Use lower-case hex consistently for register definitions Conflicts: drivers/pci/host/pci-tegra.c Drop stray pci_ioremap_io() per Thierry Reding <treding@nvidia.com>; removal tested by Jon Hunter <jonathanh@nvidia.com>.
2016-08-01Merge branches 'pci/demodularize-hosts' and 'pci/host-request-windows' into nextBjorn Helgaas24-263/+481
* pci/demodularize-hosts: PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller PCI: generic: Select IRQ_DOMAIN * pci/host-request-windows: PCI: versatile: Simplify host bridge window iteration PCI: versatile: Request host bridge window resources with core function PCI: tegra: Request host bridge window resources with core function PCI: tegra: Remove top-level resource from hierarchy PCI: rcar: Simplify host bridge window iteration PCI: rcar: Request host bridge window resources with core function PCI: rcar Gen2: Request host bridge window resources PCI: rcar: Drop gen2 dummy I/O port region ARM: Make PCI I/O space optional PCI: mvebu: Request host bridge window resources with core function PCI: generic: Simplify host bridge window iteration PCI: generic: Request host bridge window resources with core function PCI: altera: Simplify host bridge window iteration PCI: altera: Request host bridge window resources with core function PCI: xilinx-nwl: Use dev_printk() when possible PCI: xilinx-nwl: Request host bridge window resources PCI: xilinx-nwl: Free bridge resource list on failure PCI: xilinx: Request host bridge window resources PCI: xilinx: Free bridge resource list on failure PCI: xgene: Request host bridge window resources PCI: xgene: Free bridge resource list on failure PCI: iproc: Request host bridge window resources PCI: designware: Simplify host bridge window iteration PCI: designware: Request host bridge window resources PCI: designware: Free bridge resource list on failure PCI: Add devm_request_pci_bus_resources()
2016-08-01Merge branch 'pci/resource' into nextBjorn Helgaas13-90/+162
* pci/resource: unicore32/PCI: Remove pci=firmware command line parameter handling ARM/PCI: Remove arch-specific pcibios_enable_device() ARM64/PCI: Remove arch-specific pcibios_enable_device() MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: Add generic pci_bus_claim_resources() alx: Use pci_(request|release)_mem_regions ethernet/intel: Use pci_(request|release)_mem_regions GenWQE: Use pci_(request|release)_mem_regions lpfc: Use pci_(request|release)_mem_regions NVMe: Use pci_(request|release)_mem_regions PCI: Add helpers to request/release memory and I/O regions PCI: Extending pci=resource_alignment to specify device/vendor IDs sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus() microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() PCI: Unify pci_resource_to_user() declarations microblaze/PCI: Remove useless __pci_mmap_set_pgprot() powerpc/pci: Remove __pci_mmap_set_pgprot() PCI: Ignore write combining when mapping I/O port space
2016-08-01Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas19-51/+334
'pci/pm' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-08-01PCI: xgene: Make explicitly non-modularPaul Gortmaker1-6/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_XGENE drivers/pci/host/Kconfig: bool "X-Gene PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tanmay Inamdar <tinamdar@apm.com>
2016-08-01PCI: thunder-pem: Make explicitly non-modularPaul Gortmaker1-6/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_HOST_THUNDER_PEM drivers/pci/host/Kconfig: bool "Cavium Thunder PCIe controller to off-chip devices" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: David Daney <david.daney@cavium.com>
2016-08-01PCI: thunder-ecam: Make explicitly non-modularPaul Gortmaker1-6/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_HOST_THUNDER_ECAM drivers/pci/host/Kconfig: bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: David Daney <david.daney@cavium.com>
2016-08-01PCI: tegra: Make explicitly non-modularPaul Gortmaker1-7/+4
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_TEGRA drivers/pci/host/Kconfig: bool "NVIDIA Tegra PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-tegra@vger.kernel.org
2016-08-01PCI: rcar-gen2: Make explicitly non-modularPaul Gortmaker1-9/+3
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_RCAR_GEN2 drivers/pci/host/Kconfig: bool "Renesas R-Car Gen2 Internal PCI controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog, remove "Module" from author comment] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Phil Edworthy <phil.edworthy@renesas.com> CC: Valentine Barshak <valentine.barshak@cogentembedded.com>
2016-08-01PCI: rcar: Make explicitly non-modularPaul Gortmaker1-7/+4
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_RCAR_GEN2_PCIE drivers/pci/host/Kconfig: bool "Renesas R-Car PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog, remove "Module" from author comment] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Phil Edworthy <phil.edworthy@renesas.com>
2016-08-01PCI: mvebu: Make explicitly non-modularPaul Gortmaker1-7/+4
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_MVEBU drivers/pci/host/Kconfig: bool "Marvell EBU PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog, remove "Module" from author comment] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Jason Cooper <jason@lakedaemon.net>
2016-08-01PCI: layerscape: Make explicitly non-modularPaul Gortmaker1-8/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_LAYERSCAPE drivers/pci/host/Kconfig: bool "Freescale Layerscape PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Minghuan Lian <minghuan.Lian@freescale.com> CC: Mingkai Hu <mingkai.hu@freescale.com> CC: Roy Zang <tie-fei.zang@freescale.com>
2016-08-01PCI: keystone: Make explicitly non-modularPaul Gortmaker1-8/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_KEYSTONE drivers/pci/host/Kconfig: bool "TI Keystone PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-By: Murali Karicheri <m-karicheri2@ti.com>
2016-08-01PCI: hisi: Make explicitly non-modularPaul Gortmaker1-11/+2
This code is not being built as a module by anyone: host/Kconfig:config PCI_HISI host/Kconfig: bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Zhou Wang <wangzhou1@hisilicon.com> CC: Dacai Zhu <zhudacai@hisilicon.com> CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
2016-08-01PCI: generic: Make explicitly non-modularPaul Gortmaker1-8/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_HOST_GENERIC drivers/pci/host/Kconfig: bool "Generic PCI host controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com>
2016-08-01PCI: designware-plat: Make it explicitly non-modularPaul Gortmaker1-8/+2
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCIE_DW_PLAT drivers/pci/host/Kconfig: bool "Platform bus based DesignWare PCIe Controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joao Pinto <jpinto@synopsys.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Pratyush Anand <pratyush.anand@gmail.com>
2016-08-01PCI: artpec6: Make explicitly non-modularPaul Gortmaker1-8/+4
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCIE_ARTPEC6 drivers/pci/host/Kconfig: bool "Axis ARTPEC-6 PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog, add "Author" comment] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Niklas Cassel <niklas.cassel@axis.com> CC: Jesper Nilsson <jesper.nilsson@axis.com>
2016-08-01PCI: armada8k: Make explicitly non-modularPaul Gortmaker1-9/+5
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCIE_ARMADA_8K drivers/pci/host/Kconfig: bool "Marvell Armada-8K PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-01Merge branches 'pci/host-artpec' and 'pci/host-generic' into ↵Bjorn Helgaas3-0/+296
pci/demodularize-hosts * pci/host-artpec: PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller * pci/host-generic: PCI: generic: Select IRQ_DOMAIN
2016-07-29PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependencyArnd Bergmann1-0/+1
The DesignWare PCIe driver requires MSI support, so we get a warning for the artpec6 glue driver if that is not enabled: warning: (PCIE_ARTPEC6) selects PCIE_DW which has unmet direct dependencies (PCI && PCI_MSI_IRQ_DOMAIN) Add the same dependency that all other such drivers have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Cassel <niklas.cassel@axis.com>
2016-07-29PCI: Add ACS quirk for Solarflare SFC9220Edward Cree1-0/+1
The Solarflare SFC9220 apparently lacks an ACS capability, but does not perform peer-to-peer between functions. Add a quirk so we know about this isolation. [bhelgaas: changelog] Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-26PCI: aardvark: Add Aardvark PCI host controller driverThomas Petazzoni3-0/+1022
Add a driver for the Aardvark PCIe controller used on the Marvell Armada 3700 ARM64 SoC. Based on work done by Hezi Shahmoon <hezi.shahmoon@marvell.com> and Marcin Wojtas <mw@semihalf.com>. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-26PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC valuesStephen Warren1-13/+8
The value that should be programmed into the PADS_REFCLK register varies per SoC. Fix the Tegra PCIe driver to program the correct values. Future SoCs will require different values in cfg0/1, so the two values are stored separately in the per-SoC data structures. For reference, the values are all documented in NV bug 1771116 comment 20. The ASIC team has validated all these values, except for the Tegra20 value which is simply left unchanged in this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thierry Reding <treding@nvidia.com>
2016-07-26PCI: tegra: Program PADS_REFCLK_CFG* always, not just on legacy SoCsStephen Warren1-6/+9
tegra_pcie_phy_power_on() calls tegra_pcie_phy_enable() only for legacy SoCs. However, part of tegra_pcie_phy_enable() needs to happen in all cases. Move that code up one level into tegra_pcie_phy_power_on(). [bhelgaas: changelog] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-25PCI: tegra: Stop setting pcibios_min_memThierry Reding1-2/+0
pcibios_min_mem only exists on 32-bit ARM, so using it in pci-tegra.c prevents the driver from being used on other arches. In __pci_assign_resource(), we clip the available area based on PCIBIOS_MIN_MEM. On 32-bit ARM, this is pcibios_min_mem, with a default value of 0x01000000. For Tegra, we discover the space available for PCI resource allocation from the device tree, and the lowest address that will ever be available is 0x12000000 (on Tegra124). The Tegra windows are always higher than the default pcibios_min_mem, so the __pci_assign_resource() has no effect, so there's no need to adjust pcibios_min_mem here. [bhelgaas: changelog] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific oneThierry Reding1-1/+1
Use the pci_remap_iospace() function provided by the PCI core, rather than the 32-bit ARM-specific pci_ioremap_io(). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: tegra: Use lower-case hex consistently for register definitionsThierry Reding1-11/+11
Most of the register definitions use lowercase hexadecimal values, with a few exceptions using uppercase. Convert the latter to be more in line with the former. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: Allow additional bus numbers for hotplug bridgesKeith Busch2-0/+17
A user may hot add a switch requiring more than one bus to enumerate. This previously required a system reboot if BIOS did not sufficiently pad the bus resource, which they frequently don't do. Add a kernel parameter so a user can specify the minimum number of bus numbers to reserve for a hotplug bridge's subordinate buses so rebooting won't be necessary. The default is 1, which is equivalent to previous behavior. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: Remove DPC tristate module optionKeith Busch1-4/+1
Change the Downstream Port Containment config type from tristate to bool. The driver doesn't automatically load based on any rules, so it needs to be built-in in order to bind to devices it needs to drive. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: Bind DPC to Root Ports as well as Downstream PortsKeith Busch1-1/+1
PCIe port type values are not flags, so OR'ing them is not correct. Previously the result was equivalent to PCIe Downstream Ports, so we were missing binding to DPC-capable Root Ports. Change the type to 'any' so we can bind to both port types. While this will cause the code to check Upstream Ports, the driver won't claim them since they are not DPC-capable. Reported-by: Alexander Antonov <alexanderx.v.antonov@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-07-25PCI: hv: Fix interrupt cleanup pathCathy Avery1-6/+8
SR-IOV disabled from the host causes a memory leak. pci-hyperv usually first receives a PCI_EJECT notification and then proceeds to delete the hpdev list entry in hv_eject_device_work(). Later in hv_msi_free() since the device is no longer on the device list hpdev is NULL and hv_msi_free returns without freeing int_desc as part of hv_int_desc_free(). Signed-off-by: Cathy Avery <cavery@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jake Oshins <jakeo@microsoft.com>
2016-07-25PCI: dra7xx: Fix return value in case of errorChristophe JAILLET1-2/+2
In dra7xx_pcie_init_irq_domain(), the pattern used to check and return error is: if (!var) { dev_err(...); return PTR_ERR(var); } So the returned value in case of error is always 0, which means 'success'. Change it to return -ENODEV instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-25PCI: xilinx: Fix return value in case of errorChristophe JAILLET1-3/+3
In xilinx_pcie_init_irq_domain(), the pattern used to check and return error is: if (!var) { dev_err(...); return PTR_ERR(var); } So the returned value in case of error is always 0, which means 'success'. Change it to return -ENODEV instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
2016-07-22PCI: altera: Poll for link up status after retraining the linkLey Foon Tan1-1/+11
Some PCIe devices take a long time to reach link up state after retrain. Poll for link up status after retraining the link. This is to make sure the link is up before we access configuration space. [bhelgaas: changelog] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-22PCI: altera: Check link status before retrain linkLey Foon Tan1-0/+4
Check the link status before retraining. If the link is not up, don't bother trying to retrain it. [bhelgaas: split code move to separate patch, changelog] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-22PCI: altera: Reorder read/write functionsBjorn Helgaas1-16/+16
Move cra_writel(), cra_readl(), and altera_pcie_link_is_up() so a future patch can use them in altera_pcie_retrain(). No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-21PCI: Spread interrupt vectors in pci_alloc_irq_vectors()Christoph Hellwig1-45/+89
Set the affinity_mask in the PCI device before allocating vectors so that the affinity can be propagated through the MSI descriptor structures to the core IRQ code. To facilitate this, new __pci_enable_msi_range() and __pci_enable_msix_range() helpers are factored out of their not prefixed variants which assigning the new IRQ affinity mask in the PCI device so that the low-level interrupt code can perform the interrupt affinity assignment and do node-local allocations. A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that this function can also be used by drivers that don't wish to use the automatic affinity assignment. [bhelgaas: omit "else" after "return" consistently] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Provide sensible IRQ vector alloc/free routinesChristoph Hellwig1-0/+89
Add a function to allocate and free a range of interrupt vectors, using MSI-X, MSI or legacy vectors (in that order) based on the capabilities of the underlying device and PCIe complex. Additionally a new helper is provided to get the Linux IRQ number for given device-relative vector so that the drivers don't need to allocate their own arrays to keep track of the vectors for the multi vector MSI-X case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Make the "entries" argument to pci_enable_msix() optionalChristoph Hellwig1-14/+16
The "entries" argument isn't needed if the list of entries does not contain any holes. Make it optional so that we can avoid the need to allocate a msix_entry structure for this (common) case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Switch msix_program_entries() to use pci_msix_desc_addr()Christoph Hellwig1-4/+2
Instead of relying on the msix_entry structure for the vector number, read it from the msi_desc. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Add pci_msix_desc_addr() helperChristoph Hellwig1-8/+9
Add a pci_msix_desc_addr() helper to factor out the calculation of the base address for a given MSI-X vector. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-19PCI: Add DMA alias quirk for Adaptec 3805Alex Williamson1-0/+3
Add a DMA alias quirk for the Adaptec 3805, just like the 3405 quirk added in commit d3d2ab43ddae ("PCI: Add DMA alias quirk for Adaptec 3405"). Link: https://www.redhat.com/archives/vfio-users/2016-July/msg00046.html Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-19PCI: Include <asm/dma.h> for isa_dma_bridge_buggyBen Dooks1-0/+1
At least on arm, <asm/dma.h> does not get included when building drivers/pci/pci.o. This causes the following build warning which can be fixed by including <asm/dma.h>: drivers/pci/pci.c:37:5: warning: symbol 'isa_dma_bridge_buggy' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-02Merge tag 'drm-fixes-for-v4.7-rc6' of ↵Linus Torvalds11-72/+156
git://people.freedesktop.org/~airlied/linux Pull drm fixes frlm Dave Airlie: "Just some AMD and Intel fixes, the AMD ones are further production Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID changes and a couple of other fixes. Still a bit Internet challenged here, hopefully end of next week will solve it" * tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fix missing unlock on error in i915_ppgtt_info() drm/amd/powerplay: workaround for UVD clock issue drm/amdgpu: add ACLK_CNTL setting for polaris10 drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. drm/i915: Removing PCI IDs that are no longer listed as Kabylake. drm/i915: Add more Kabylake PCI IDs. drm/i915: Avoid early timeout during AUX transfers drm/i915/hsw: Avoid early timeout during LCPLL disable/restore drm/i915/lpt: Avoid early timeout during FDI PHY reset drm/i915/bxt: Avoid early timeout during PLL enable drm/i915: Refresh cached DP port register value on resume drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation drm/amd/powerplay: disable FFC. drm/amd/powerplay: add some definition for FFC feature on polaris.
2016-07-02Merge tag 'spi-fix-v4.7-rc5' of ↵Linus Torvalds4-6/+38
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small driver-specific fixes for SPI, all in the normal important if you hit them category especially the rockchip driver fix which addresses a race which has been exposed more frequently with some recent performance improvements" * tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sunxi: fix transfer timeout spi: sun4i: fix FIFO limit spi: rockchip: Signal unfinished DMA transfers spi: spi-ti-qspi: Suspend the queue before removing the device
2016-07-02Merge tag 'regulator-fix-v4.7-rc5' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two small fixes for the regulator subsystem - one fixing a crash with one of the devices supported by the max77620 driver, another fixing startup for the anatop regulator when it starts up with the regulator in bypass mode" * tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max77620: check for valid regulator info regulator: anatop: allow regulator to be in bypass mode
2016-07-02Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-17/+11
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A small fix for the newly added oxnas clk driver and a handful of rockchip clk driver fixes for newly added rk3399 support" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Fix return value check in oxnas_stdclk_probe() clk: rockchip: release io resource when failing to init clk on rk3399 clk: rockchip: fix cpuclk registration error handling clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src clk: rockchip: mark rk3399 GIC clocks as critical clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
2016-07-02Merge tag 'drm-intel-fixes-2016-06-30' of ↵Dave Airlie4-16/+18
git://anongit.freedesktop.org/drm-intel into drm-fixes here's a batch of i915 fixes for 4.7. * tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix missing unlock on error in i915_ppgtt_info() drm/i915: Removing PCI IDs that are no longer listed as Kabylake. drm/i915: Add more Kabylake PCI IDs. drm/i915: Avoid early timeout during AUX transfers drm/i915/hsw: Avoid early timeout during LCPLL disable/restore drm/i915/lpt: Avoid early timeout during FDI PHY reset drm/i915/bxt: Avoid early timeout during PLL enable drm/i915: Refresh cached DP port register value on resume
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 04:12:55 +0000