| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If kvzalloc() fails then return -ENOMEM. Don't return success.
Fixes: 3b20949cb21b ("net/mlx5e: Add MACsec RX steering rules")
Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When having multiple dests with termination tables and second one
or afterwards fails the driver reverts usage of term tables but
doesn't reset the assignment in attr->dests[num_vport_dests].termtbl
which case a use-after-free when releasing the rule.
Fix by resetting the assignment of termtbl to null.
Fixes: 10caabdaad5a ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If sscanf() return 0, outlen is uninitialized and used in kzalloc(),
this is unexpected. We should return -EINVAL if the string is invalid.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If creating bond first and then enabling sriov in switchdev mode,
will hit the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:778:(pid 25543): CREATE_LAG(0x840) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x7d49cb), err(-22)
The reason is because the offending patch removes eswitch mode
none. In vf lag, the checking of eswitch mode none is replaced
by checking if sriov is enabled. But when driver enables sriov,
it triggers the bond workqueue task first and then setting sriov
number in pci_enable_sriov(). So the check fails.
Fix it by checking if sriov is enabled using eswitch internal
counter that is set before triggering the bond workqueue task.
Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit removes eswitch mode none. But when disabling
sriov in legacy mode or changing from switchdev to legacy mode
without sriov enabled, the legacy fdb table is not destroyed.
It is not the right behavior. Destroy legacy fdb table in above
two caes.
Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Smatch warns this:
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_table.c:81
mlx5dr_table_set_miss_action() error: uninitialized symbol 'ret'.
Initializing ret with -EOPNOTSUPP and fix missing action case.
Fixes: 7838e1725394 ("net/mlx5: DR, Expose steering table functionality")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The ACPI buffer memory (buffer.pointer) should be freed as the
buffer is not used after acpi_evaluate_object(), free it to
prevent memory leak.
Fixes: 13e920d93e37 ("net: wwan: t7xx: Add core components")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669119580-28977-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20221122055449.31247-1-jiasheng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the blamed commit, a rudimentary reallocation procedure for RX buffer
descriptors was implemented, for the situation when their format changes
between normal (no PTP) and extended (PTP).
enetc_hwtstamp_set() calls enetc_close() and enetc_open() in a sequence,
and this sequence loses information which was previously configured in
the TX BDR Mode Register, specifically via the enetc_set_bdr_prio() call.
The TX ring priority is configured by tc-mqprio and tc-taprio, and
affects important things for TSN such as the TX time of packets. The
issue manifests itself most visibly by the fact that isochron --txtime
reports premature packet transmissions when PTP is first enabled on an
enetc interface.
Save the TX ring priority in a new field in struct enetc_bdr (occupies a
2 byte hole on arm64) in order to make this survive a ring reconfiguration.
Fixes: 434cebabd3a2 ("enetc: Add dynamic allocation of extended Rx BD rings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221122130936.1704151-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
prestera_port_create()
If prestera_port_sfp_bind() fails, unregister_netdev() should be called
in error handling path.
Compile tested only.
Fixes: 52323ef75414 ("net: marvell: prestera: add phylink support")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/1669115432-36841-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seems intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.
To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as validation checks are
moved ahead of memory allocation.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Error path does not free previously allocated memory. Add devm_kfree() to
the failure path.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so
e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will
resend the skb. But the skb is already freed, which will cause UAF bug
when the upper layer resends the skb.
Remove the harmful free.
Fixes: 5e5d49422dfb ("e100: Release skb when DMA mapping is failed in e100_xmit_prepare")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The iavf_init_module() won't destroy workqueue when pci_register_driver()
failed. Call destroy_workqueue() when pci_register_driver() failed to
prevent the resource leak.
Similar to the handling of u132_hcd_init in commit f276e002793c
("usb: u132-hcd: fix resource leak")
Fixes: 2803b16c10ea ("i40e/i40evf: Use private workqueue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A problem about modprobe fm10k failed is triggered with the following log
given:
Intel(R) Ethernet Switch Host Interface Driver
Copyright(c) 2013 - 2019 Intel Corporation.
debugfs: Directory 'fm10k' with parent '/' already present!
The reason is that fm10k_init_module() returns fm10k_register_pci_driver()
directly without checking its return value, if fm10k_register_pci_driver()
failed, it returns without removing debugfs and destroy workqueue,
resulting the debugfs of fm10k can never be created later and leaks the
workqueue.
fm10k_init_module()
alloc_workqueue()
fm10k_dbg_init() # create debugfs
fm10k_register_pci_driver()
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without remove debugfs and destroy workqueue
Fix by remove debugfs and destroy workqueue when
fm10k_register_pci_driver() returns error.
Fixes: 7461fd913afe ("fm10k: Add support for debugfs")
Fixes: b382bb1b3e2d ("fm10k: use separate workqueue for fm10k driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
i40e_init_module() won't free the debugfs directory created by
i40e_dbg_init() when pci_register_driver() failed. Add fail path to
call i40e_dbg_exit() to remove the debugfs entries to prevent the bug.
i40e: Intel(R) Ethernet Connection XL710 Network Driver
i40e: Copyright (c) 2013 - 2019 Intel Corporation.
debugfs: Directory 'i40e' with parent '/' already present!
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ixgbevf_init_module() won't destroy the workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed. Add
destroy_workqueue() in fail path to prevent the resource leak.
Similar to the handling of u132_hcd_init in commit f276e002793c
("usb: u132-hcd: fix resource leak")
Fixes: 40a13e2493c9 ("ixgbevf: Use a private workqueue to avoid certain possible hangs")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ZLP for DisplayLink ethernet devices was enabled in 6.0:
266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices").
The related driver_info should be the "same as cdc_ncm_info, but with
FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast
traffic was missing in the new cdc_ncm_zlp_info.
usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with:
e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast
traffic")
Without this hook, multicast, and then IPv6 SLAAC, is broken.
Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices")
Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add RmNet support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dm9051_loop_rx() returns without release skb when dm9051_stop_mrcmd()
returns error, free the skb to avoid this leak.
Fixes: 2dc95a4d30ed ("net: Add dm9051 driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.
This patch adds freeing dev and info after com20020_config()
fails to fix this bug.
Compile tested only.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix possible race condition in macsec extended packet number update routine
net/mlx5e: Fix MACsec update SecY
net/mlx5e: Fix MACsec SA initialization routine
net/mlx5e: Remove leftovers from old XSK queues enumeration
net/mlx5e: Offload rule only when all encaps are valid
net/mlx5e: Fix missing alignment in size of MTT/KLM entries
net/mlx5: Fix sync reset event handler error flow
net/mlx5: E-Switch, Set correctly vport destination
net/mlx5: Lag, avoid lockdep warnings
net/mlx5: Fix handling of entry refcount when command is not issued to FW
net/mlx5: cmdif, Print info on any firmware cmd failure to tracepoint
net/mlx5: SF: Fix probing active SFs during driver probe phase
net/mlx5: Fix FW tracer timestamp calculation
net/mlx5: Do not query pci info while pci disabled
====================
Link: https://lore.kernel.org/r/20221122022559.89459-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_ppe_init(), when dmam_alloc_coherent() or devm_kzalloc() failed,
the rhashtable ppe->l2_flows isn't destroyed. Fix it.
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() or
register_netdev() failed, have the same problem. Fix it.
Fixes: 33fc42de3327 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() failed,
mtk_mdio_cleanup() isn't called. Fix it.
Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fail to dma_map_single() in mtk_rx_alloc(), it returns directly.
But the memory allocated for local variable data is not freed, and
local variabel data has not been attached to ring->data[i] yet, so the
memory allocated for local variable data will not be freed outside
mtk_rx_alloc() too. Thus memory leak would occur in this scenario.
Add skb_free_frag(data) when dma_map_single() failed.
Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Link: https://lore.kernel.org/r/20221120035405.1464341-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If PTP synchronisation is done every second, then sporadic the interval
is higher than one second:
ptp4l[696.582]: master offset -17 s2 freq -1891 path delay 573
ptp4l[697.582]: master offset -22 s2 freq -1901 path delay 573
ptp4l[699.368]: master offset -1 s2 freq -1887 path delay 573
^^^^^^^ Should be 698.582!
This problem is caused by rotten packets, which are received after
polling but before interrupts are enabled again. This can be fixed by
checking for pending work and rescheduling if necessary after interrupts
has been enabled again.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 4581dd480c9e ("net: octeontx2-pf: mcs: consider MACSEC setting")
has already added "depends on MACSEC || !MACSEC", so remove it.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221119133616.3583538-1-zhengbin13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.
Fixes: b56e9670ffa4 ("bnx2x: Prepare device and initialize VF database")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __ef100_hard_start_xmit() returns NETDEV_TX_OK without freeing skb
in error handling case, add dev_kfree_skb_any() to fix it.
Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668671409-10909-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().
Fixes: d38a648d2d6c ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 1229b33973c7 ("ice: Add low latency Tx timestamp read") refactored
PTP timestamping logic to use a threaded IRQ instead of a separate kthread.
This implementation introduced ice_misc_intr_thread_fn and redefined the
ice_ptp_process_ts function interface to return a value of whether or not
the timestamp processing was complete.
ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts
and convert it into either IRQ_HANDLED if there were no more timestamps to
be processed, or IRQ_WAKE_THREAD if the thread should continue processing.
This is not correct, as the kernel does not re-schedule threaded IRQ
functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ
function.
This results in the ice_ptp_process_ts function (and in turn the
ice_ptp_tx_tstamp function) from only being called exactly once per
interrupt.
If an application sends a burst of Tx timestamps without waiting for a
response, the interrupt will trigger for the first timestamp. However,
later timestamps may not have arrived yet. This can result in dropped or
discarded timestamps. Worse, on E822 hardware this results in the interrupt
logic getting stuck such that no future interrupts will be triggered. The
result is complete loss of Tx timestamp functionality.
Fix this by modifying the ice_misc_intr_thread_fn to perform its own
polling of the ice_ptp_process_ts function. We sleep for a few microseconds
between attempts to avoid wasting significant CPU time. The value was
chosen to allow time for the Tx timestamps to complete without wasting so
much time that we overrun application wait budgets in the worst case.
The ice_ptp_process_ts function also currently returns false in the event
that the Tx tracker is not initialized. This would result in the threaded
IRQ handler never exiting if it gets started while the tracker is not
initialized.
Fix the function to appropriately return true when the tracker is not
initialized.
Note that this will not reproduce with default ptp4l behavior, as the
program always synchronously waits for a timestamp response before sending
another timestamp request.
Reported-by: Siddaraju DH <siddaraju.dh@intel.com>
Fixes: 1229b33973c7 ("ice: Add low latency Tx timestamp read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-18 (iavf)
Ivan Vecera resolves issues related to reset by adding back call to
netif_tx_stop_all_queues() and adding calls to dev_close() to ensure
device is properly closed during reset.
Stefan Assmann removes waiting for setting of MAC address as this breaks
ARP.
Slawomir adds setting of __IAVF_IN_REMOVE_TASK bit to prevent deadlock
between remove and shutdown.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix race condition between iavf_shutdown and iavf_remove
iavf: remove INITIAL_MAC_SET to allow gARP to work properly
iavf: Do not restart Tx queues after reset task failure
iavf: Fix a crash during reset task
====================
Link: https://lore.kernel.org/r/20221118222439.1565245-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the ccr read error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
update routine
Currenty extended packet number (EPN) update routine is accessing
macsec object without holding the general macsec lock hence facing
a possible race condition when an EPN update occurs while updating
or deleting the SA.
Fix by holding the general macsec lock before accessing the object.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently updating SecY destroys and re-creates RX SA objects,
the re-created RX SA objects are not identical to the destroyed
objects and it disagree on the encryption enabled property which
holds the value false after recreation, this value is not
supported with offload which leads to no traffic after an update.
Fix by recreating an identical objects.
Fixes: 5a39816a75e5 ("net/mlx5e: Add MACsec offload SecY support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently as part of MACsec SA initialization routine
extended packet number (EPN) object attribute is always
being set without checking if EPN is actually enabled,
the above could lead to a NULL dereference.
Fix by adding such a check.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before the cited commit, for N channels, a dedicated set of N queues was
created to support XSK, in indices [N, 2N-1], doubling the number of
queues.
In addition, changing the number of channels was prohibited, as it would
shift the indices.
Remove these two leftovers, as we moved XSK to a new queueing scheme,
starting from index 0.
Fixes: 3db4c85cde7a ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit adds a for loop to support multiple encapsulations.
But it only checks if the last encap is valid.
Fix it by setting slow path flag when one of the encap is invalid.
Fixes: f493f15534ec ("net/mlx5e: Move flow attr reformat action bit to per dest flags")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the cited patch, an alignment required by the HW spec was mistakenly
dropped. Bring it back to fix error completions like the below:
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x40b, ci 0x0, qn 0x104f, opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 86 00 68 02 25 00 10 4f 00 00 bb d2
WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 192
00000000: 00 00 00 25 00 10 4f 0c 00 00 00 00 00 18 2e 00
00000010: 90 00 00 00 00 02 00 00 00 00 00 00 20 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000080: 08 00 00 00 48 6a 00 02 08 00 00 00 0e 10 00 02
00000090: 08 00 00 00 0c db 00 02 08 00 00 00 0e 82 00 02
000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes: 9f123f740428 ("net/mlx5e: Improve MTT/KSM alignment")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When sync reset now event handling fails on mlx5_pci_link_toggle() then
no reset was done. However, since mlx5_cmd_fast_teardown_hca() was
already done, the firmware function is closed and the driver is left
without firmware functionality.
Fix it by setting device error state and reopen the firmware resources.
Reopening is done by the thread that was called for devlink reload
fw_activate as it already holds the devlink lock.
Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit moved from using reformat_id integer to packet_reformat
pointer which introduced the possibility to null pointer dereference.
When setting packet reformat flag and pkt_reformat pointer must
exists so checking MLX5_ESW_DEST_ENCAP is not enough, we need
to make sure the pkt_reformat is valid and check for MLX5_ESW_DEST_ENCAP_VALID.
If the dest encap valid flag does not exists then pkt_reformat can be
either invalid address or null.
Also, to make sure we don't try to access invalid pkt_reformat set it to
null when invalidated and invalidate it before calling add flow code as
its logically more correct and to be safe.
Fixes: 2b688ea5efde ("net/mlx5: Add flow steering actions to fs_cmd shim layer")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ldev->lock is used to serialize lag change operations. Since multiport
eswtich functionality was added, we now change the mode dynamically.
However, acquiring ldev->lock is not allowed as it could possibly lead
to a deadlock as reported by the lockdep mechanism.
[ 836.154963] WARNING: possible circular locking dependency detected
[ 836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted
[ 836.156549] ------------------------------------------------------
[ 836.157418] handler1/12198 is trying to acquire lock:
[ 836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.159575]
[ 836.159575] but task is already holding lock:
[ 836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 836.161669] which lock already depends on the new lock.
[ 836.162905]
[ 836.162905] the existing dependency chain (in reverse order) is:
[ 836.164008] -> #3 (&block->cb_lock){++++}-{3:3}:
[ 836.164946] down_write+0x25/0x60
[ 836.165548] tcf_block_get_ext+0x1c6/0x5d0
[ 836.166253] ingress_init+0x74/0xa0 [sch_ingress]
[ 836.167028] qdisc_create.constprop.0+0x130/0x5e0
[ 836.167805] tc_modify_qdisc+0x481/0x9f0
[ 836.168490] rtnetlink_rcv_msg+0x16e/0x5a0
[ 836.169189] netlink_rcv_skb+0x4e/0xf0
[ 836.169861] netlink_unicast+0x190/0x250
[ 836.170543] netlink_sendmsg+0x243/0x4b0
[ 836.171226] sock_sendmsg+0x33/0x40
[ 836.171860] ____sys_sendmsg+0x1d1/0x1f0
[ 836.172535] ___sys_sendmsg+0xab/0xf0
[ 836.173183] __sys_sendmsg+0x51/0x90
[ 836.173836] do_syscall_64+0x3d/0x90
[ 836.174471] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.175282]
[ 836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}:
[ 836.176190] __mutex_lock+0x6b/0xf80
[ 836.176830] register_netdevice_notifier+0x21/0x120
[ 836.177631] rtnetlink_init+0x2d/0x1e9
[ 836.178289] netlink_proto_init+0x163/0x179
[ 836.178994] do_one_initcall+0x63/0x300
[ 836.179672] kernel_init_freeable+0x2cb/0x31b
[ 836.180403] kernel_init+0x17/0x140
[ 836.181035] ret_from_fork+0x1f/0x30
[ 836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}:
[ 836.182628] down_write+0x25/0x60
[ 836.183235] unregister_netdevice_notifier+0x1c/0xb0
[ 836.184029] mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib]
[ 836.184855] __mlx5_ib_remove+0x35/0x60 [mlx5_ib]
[ 836.185637] mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core]
[ 836.186698] auxiliary_bus_remove+0x18/0x30
[ 836.187409] device_release_driver_internal+0x1f6/0x270
[ 836.188253] bus_remove_device+0xef/0x160
[ 836.188939] device_del+0x18b/0x3f0
[ 836.189562] mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core]
[ 836.190516] mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core]
[ 836.191414] mlx5_do_bond_work+0x441/0x620 [mlx5_core]
[ 836.192278] process_one_work+0x25c/0x590
[ 836.192963] worker_thread+0x4f/0x3d0
[ 836.193609] kthread+0xcb/0xf0
[ 836.194189] ret_from_fork+0x1f/0x30
[ 836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}:
[ 836.195734] __lock_acquire+0x15b8/0x2a10
[ 836.196426] lock_acquire+0xce/0x2d0
[ 836.197057] __mutex_lock+0x6b/0xf80
[ 836.197708] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.198575] tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[ 836.199467] parse_tc_actions+0x168/0x5a0 [mlx5_core]
[ 836.200340] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[ 836.201241] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[ 836.202187] tc_setup_cb_add+0xd7/0x200
[ 836.202856] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 836.203739] fl_change+0xbbe/0x1730 [cls_flower]
[ 836.204501] tc_new_tfilter+0x407/0xd90
[ 836.205168] rtnetlink_rcv_msg+0x406/0x5a0
[ 836.205877] netlink_rcv_skb+0x4e/0xf0
[ 836.206535] netlink_unicast+0x190/0x250
[ 836.207217] netlink_sendmsg+0x243/0x4b0
[ 836.207915] sock_sendmsg+0x33/0x40
[ 836.208538] ____sys_sendmsg+0x1d1/0x1f0
[ 836.209219] ___sys_sendmsg+0xab/0xf0
[ 836.209878] __sys_sendmsg+0x51/0x90
[ 836.210510] do_syscall_64+0x3d/0x90
[ 836.211137] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.211954] other info that might help us debug this:
[ 836.213174] Chain exists of:
[ 836.213174] &ldev->lock --> rtnl_mutex --> &block->cb_lock
836.214650] Possible unsafe locking scenario:
[ 836.214650]
[ 836.215574] CPU0 CPU1
[ 836.216255] ---- ----
[ 836.216943] lock(&block->cb_lock);
[ 836.217518] lock(rtnl_mutex);
[ 836.218348] lock(&block->cb_lock);
[ 836.219212] lock(&ldev->lock);
[ 836.219758]
[ 836.219758] *** DEADLOCK ***
[ 836.219758]
[ 836.220747] 2 locks held by handler1/12198:
[ 836.221390] #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 836.222646] #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[ 836.224063] stack backtrace:
[ 836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1
[ 836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 836.227476] Call Trace:
[ 836.227929] <TASK>
[ 836.228332] dump_stack_lvl+0x57/0x7d
[ 836.228924] check_noncircular+0x104/0x120
[ 836.229562] __lock_acquire+0x15b8/0x2a10
[ 836.230201] lock_acquire+0xce/0x2d0
[ 836.230776] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.231614] ? find_held_lock+0x2b/0x80
[ 836.232221] __mutex_lock+0x6b/0xf80
[ 836.232799] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.233636] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.234451] ? xa_load+0xc3/0x190
[ 836.234995] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.235803] tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[ 836.236636] ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core]
[ 836.237550] parse_tc_actions+0x168/0x5a0 [mlx5_core]
[ 836.238364] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[ 836.239202] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[ 836.240076] ? lock_acquire+0xce/0x2d0
[ 836.240668] ? tc_setup_cb_add+0x5b/0x200
[ 836.241294] tc_setup_cb_add+0xd7/0x200
[ 836.241917] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 836.242709] fl_change+0xbbe/0x1730 [cls_flower]
[ 836.243408] tc_new_tfilter+0x407/0xd90
[ 836.244043] ? tc_del_tfilter+0x880/0x880
[ 836.244672] rtnetlink_rcv_msg+0x406/0x5a0
[ 836.245310] ? netlink_deliver_tap+0x7a/0x4b0
[ 836.245991] ? if_nlmsg_stats_size+0x2b0/0x2b0
[ 836.246675] netlink_rcv_skb+0x4e/0xf0
[ 836.258046] netlink_unicast+0x190/0x250
[ 836.258669] netlink_sendmsg+0x243/0x4b0
[ 836.259288] sock_sendmsg+0x33/0x40
[ 836.259857] ____sys_sendmsg+0x1d1/0x1f0
[ 836.260473] ___sys_sendmsg+0xab/0xf0
[ 836.261064] ? lock_acquire+0xce/0x2d0
[ 836.261669] ? find_held_lock+0x2b/0x80
[ 836.262272] ? __fget_files+0xb9/0x190
[ 836.262871] ? __fget_files+0xd3/0x190
[ 836.263462] __sys_sendmsg+0x51/0x90
[ 836.264064] do_syscall_64+0x3d/0x90
[ 836.264652] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.265425] RIP: 0033:0x7fdbe5e2677d
[ 836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee
ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48
[ 836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d
[ 836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c
[ 836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000
[ 836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860
[ 836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640
[ 836.274521] </TASK>
To avoid using mode holding ldev->lock in the configure flow, we queue a
work to the lag workqueue and cease wait on a completion object.
In addition, we remove the lock from mlx5_lag_do_mirred() since it is
not really protecting anything.
It should be noted that an actual deadlock has not been observed.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case command interface is down, or the command is not allowed, driver
did not increment the entry refcount, but might have decrement as part
of forced completion handling.
Fix that by always increment and decrement the refcount to make it
symmetric for all flows.
Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reported-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
While moving to new CMD API (quiet API), some pre-existing flows may call the new API
function that in case of error, returns the error instead of printing it as previously done.
For such flows we bring back the print but to tracepoint this time for sys admins to
have the ability to check for errors especially for commands using the new quiet API.
Tracepoint output example:
devlink-1333 [001] ..... 822.746922: mlx5_cmd: ACCESS_REG(0x805) op_mod(0x0) failed, status bad resource(0x5), syndrome (0xb06e1f), err(-22)
Fixes: f23519e542e5 ("net/mlx5: cmdif, Add new api for command execution")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When SF devices and SF port representors are located on different
functions, unloading and reloading of SF parent driver doesn't recreate
the existing SF present in the device.
Fix it by querying SFs and probe active SFs during driver probe phase.
Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix a bug in calculation of FW tracer timestamp. Decreasing one in the
calculation should effect only bits 52_7 and not effect bits 6_0 of the
timestamp, otherwise bits 6_0 are always set in this calculation.
Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The driver should not interact with PCI while PCI is disabled. Trying to
do so may result in being unable to get vital signs during PCI reset,
driver gets timed out and fails to recover.
Fixes: fad1783a6d66 ("net/mlx5: Print more info on pci error handlers")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This code accidentally uses the RX macro twice instead of the RX and TX.
Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
