summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-06-23net: qede: fix PTP initialization on recoveryAlexander Lobakin3-20/+15
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix excessive QM ILT lines consumptionAlexander Lobakin1-1/+1
This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix NVMe login fails over VFsAlexander Lobakin1-5/+18
25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: stop adding events on an already destroyed workqueueAlexander Lobakin1-1/+2
Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix async event callbacks unregisteringAlexander Lobakin3-5/+7
qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: device: avoid circular netns referencesJason A. Donenfeld4-45/+55
Before, we took a reference to the creating netns if the new netns was different. This caused issues with circular references, with two wireguard interfaces swapping namespaces. The solution is to rather not take any extra references at all, but instead simply invalidate the creating netns pointer when that netns is deleted. In order to prevent this from happening again, this commit improves the rough object leak tracking by allowing it to account for created and destroyed interfaces, aside from just peers and keys. That then makes it possible to check for the object leak when having two interfaces take a reference to each others' namespaces. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: noise: do not assign initiation time in if conditionFrank Werner-Krippendorf1-2/+2
Fixes an error condition reported by checkpatch.pl which caused by assigning a variable in an if condition in wg_noise_handshake_consume_ initiation(). Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22usbnet: smsc95xx: Fix use-after-free after removalTuomas Tynkkynen1-1/+1
Syzbot reports an use-after-free in workqueue context: BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline] smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644 process_one_work+0x777/0xf90 kernel/workqueue.c:2274 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420 kthread+0x2df/0x300 kernel/kthread.c:255 It looks like that smsc95xx_unbind() is freeing the structures that are still in use by the concurrently running workqueue callback. Thus switch to using cancel_delayed_work_sync() to ensure the work callback really is no longer active. Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22mlxsw: spectrum: Do not rely on machine endiannessIdo Schimmel4-9/+7
The second commit cited below performed a cast of 'u32 buffsize' to '(u16 *)' when calling mlxsw_sp_port_headroom_8x_adjust(): mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, (u16 *) &buffsize); Colin noted that this will behave differently on big endian architectures compared to little endian architectures. Fix this by following Colin's suggestion and have the function accept and return 'u32' instead of passing the current size by reference. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Fixes: 60833d54d56c ("mlxsw: spectrum: Adjust headroom buffers for 8x ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Colin Ian King <colin.king@canonical.com> Suggested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22net: phy: smsc: fix printing too many logsDejin Zheng1-4/+7
Commit 7ae7ad2f11ef47 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") will print a lot of logs as follows when Ethernet cable is not connected: [ 4.473105] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: lan87xx_read_status failed: -110 When wait 640 ms for check ENERGYON bit, the timeout should not be regarded as an actual error and an error message also should not be printed. due to a hardware bug in LAN87XX device, it leads to unstable detection of plugging in Ethernet cable when LAN87xx is in Energy Detect Power-Down mode. the workaround for it involves, when the link is down, and at each read_status() call: - disable EDPD mode, forcing the PHY out of low-power mode - waiting 640ms to see if we have any energy detected from the media - re-enable entry to EDPD mode This is presumably enough to allow the PHY to notice that a cable is connected, and resume normal operations to negotiate with the partner. The problem is that when no media is detected, the 640ms wait times out and this commit was modified to prints an error message. it is an inappropriate conversion by used phy_read_poll_timeout() to introduce this bug. so fix this issue by use read_poll_timeout() to replace phy_read_poll_timeout(). Fixes: 7ae7ad2f11ef47 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") Reported-by: Kevin Groeneveld <kgroeneveld@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22IB/mad: Fix use after free when destroying MAD agentShay Drory1-1/+1
Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-22RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udataLeon Romanovsky1-1/+1
Don't deref udata if it is NULL BUG: kernel NULL pointer dereference, address: 0000000000000030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 SMP PTI CPU: 2 PID: 1592 Comm: python3 Not tainted 5.7.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:create_qp+0x39e/0xae0 [mlx5_ib] Code: c0 0d 00 00 bf 10 01 00 00 e8 be a9 e4 e0 48 85 c0 49 89 c2 0f 84 0c 07 00 00 41 8b 85 74 63 01 00 0f c8 a9 00 00 00 10 74 0a <41> 8b 46 30 0f c8 41 89 42 14 41 8b 52 18 41 0f b6 4a 1c 0f ca 89 RSP: 0018:ffffc9000067f8b0 EFLAGS: 00010206 RAX: 0000000010170000 RBX: ffff888441313000 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000000000 RDI: ffff88845b1d4400 RBP: ffffc9000067fa60 R08: 0000000000000200 R09: ffff88845b1d4200 R10: ffff88845b1d4200 R11: ffff888441313000 R12: ffffc9000067f950 R13: ffff88846ac00140 R14: 0000000000000000 R15: ffff88846c2bc000 FS: 00007faa1a3c0540(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000446dca003 CR4: 0000000000760ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 mlx5_ib_create_qp+0x897/0xfa0 [mlx5_ib] ib_create_qp+0x9e/0x300 [ib_core] create_qp+0x92d/0xb20 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ? release_resource+0x30/0x30 ib_uverbs_create_qp+0xc4/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc8/0xf0 [ib_uverbs] ib_uverbs_run_method+0x223/0x770 [ib_uverbs] ? track_pfn_remap+0xa7/0x100 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? remap_pfn_range+0x358/0x490 ib_uverbs_cmd_verbs.isra.6+0x19b/0x370 [ib_uverbs] ? rdma_umap_priv_init+0x82/0xe0 [ib_core] ? vm_mmap_pgoff+0xec/0x120 ib_uverbs_ioctl+0xc0/0x120 [ib_uverbs] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200621115959.60126-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-22RDMA/counter: Query a counter before releaseMark Zhang1-1/+3
Query a dynamically-allocated counter before release it, to update it's hwcounters and log all of them into history data. Otherwise all values of these hwcounters will be lost. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-22Merge tag 'spi-fix-v5.8-rc2' of ↵Linus Torvalds5-44/+64
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "Quite a lot of fixes here for no single reason. There's a collection of the usual sort of device specific fixes and also a bunch of people have been working on spidev and the userspace test program spidev_test so they've got an unusually large collection of small fixes" * tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: fix a potential use-after-free in spidev_release() spi: spidev: fix a race between spidev_release and spidev_remove spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER spi: uapi: spidev: Use TABs for alignment spi: spi-fsl-dspi: Free DMA memory with matching function spi: tools: Add macro definitions to fix build errors spi: tools: Make default_tx/rx and input_tx static spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a spi: rspi: Use requested instead of maximum bit rate spi: spidev_test: Use %u to format unsigned numbers spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
2020-06-22Merge tag 'regulator-fix-v5.8-rc2' of ↵Linus Torvalds4-24/+41
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "This has a fix for the refactoring out of the pickable ranges functionality, plus the removal of a BROKEN dependency on mt6358 now that the dependencies were merged in -rc1 and a couple of device specific fixes" * tag 'regulator-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: mt6358: Remove BROKEN dependency regualtor: pfuze100: correct sw1a/sw2 on pfuze3000 regulator: Fix pickable ranges mapping regulator: da9063: fix LDO9 suspend and warning.
2020-06-22Merge tag 'regmap-fix-v5.8-rc2' of ↵Linus Torvalds1-56/+50
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A few small fixes, none of which are likely to have any substantial impact here - the most substantial one is a fix for a long standing memory leak on devices that use register patching which will only have an impact if the device is removed and re-added" * tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix memory leak from regmap_register_patch regmap: fix the kerneldoc for regmap_test_bits() regmap: fix alignment issue
2020-06-22tools/virtio: Add --resetEugenio Pérez2-0/+58
Currently, it only removes and add backend, but it will reset vq position in future commits. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-5-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22virtio-mem: add memory via add_memory_driver_managed()David Hildenbrand1-3/+22
Virtio-mem managed memory is always detected and added by the virtio-mem driver, never using something like the firmware-provided memory map. This is the case after an ordinary system reboot, and has to be guaranteed after kexec. Especially, virtio-mem added memory resources can contain inaccessible parts ("unblocked memory blocks"), blindly forwarding them to a kexec kernel is dangerous, as unplugged memory will get accessed (esp. written). Let's use the new way of adding special driver-managed memory introduced in commit 7b7b27214bba ("mm/memory_hotplug: introduce add_memory_driver_managed()"). This will result in no entries in /sys/firmware/memmap ("raw firmware- provided memory map"), the memory resource will be flagged IORESOURCE_MEM_DRIVER_MANAGED (esp., kexec_file_load() will not place kexec images on this memory), and it is exposed as "System RAM (virtio_mem)" in /proc/iomem, so esp. kexec-tools can properly handle it. Example /proc/iomem before this change: [...] 140000000-333ffffff : virtio0 140000000-147ffffff : System RAM 334000000-533ffffff : virtio1 338000000-33fffffff : System RAM 340000000-347ffffff : System RAM 348000000-34fffffff : System RAM [...] Example /proc/iomem after this change: [...] 140000000-333ffffff : virtio0 140000000-147ffffff : System RAM (virtio_mem) 334000000-533ffffff : virtio1 338000000-33fffffff : System RAM (virtio_mem) 340000000-347ffffff : System RAM (virtio_mem) 348000000-34fffffff : System RAM (virtio_mem) [...] Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: teawater <teawaterz@linux.alibaba.com> Fixes: 5f1f79bbc9e26 ("virtio-mem: Paravirtualized memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200611093518.5737-1-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
2020-06-22virtio-mem: silence a static checker warningDan Carpenter1-1/+1
Smatch complains that "rc" can be uninitialized if we hit the "break;" statement on the first iteration through the loop. I suspect that this can't happen in real life, but returning a zero literal is cleaner and silence the static checker warning. Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200610085911.GC5439@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()Dan Carpenter1-1/+1
The "vma->vm_pgoff" variable is an unsigned long so if it's larger than INT_MAX then "index" can be negative leading to an underflow. Fix this by changing the type of "index" to "unsigned long". Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200610085852.GB5439@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22vdpa: fix typos in the comments for __vdpa_alloc_device()Jason Wang1-1/+1
Fix two typos in the comments for __vdpa_alloc_device(). Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200527060528.9100-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-21Merge tag 'pinctrl-v5.8-2' of ↵Linus Torvalds6-23/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some early fixes collected during the first week after the merge window, all pretty self-evident, with the details below. The revert is the crucial thing. - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated twice without a unique irqchip struct - Use the noirq variants of the suspend and resume callbacks in the Tegra driver - Clean up the errorpath on the MCP23s08 driver - Revert the use of devm_of_iomap() in the Freescale driver as it was regressing the platform - Add some missing pins in the Qualcomm IPQ6018 driver - Fix a simple documentation bug in the pinctrl-single driver" * tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: fix function name in documentation pinctrl: qcom: ipq6018 Add missing pins in qpic pin group Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings pinctrl: tegra: Use noirq suspend/resume callbacks pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
2020-06-21Merge branch 'linus' of ↵Linus Torvalds8-25/+39
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - NULL dereference in octeontx - PM reference imbalance in ks-sa - deadlock in crypto manager - memory leak in drbg - missing socket limit check on receive SG list size in algif_skcipher - typos in caam - warnings in ccp and hisilicon * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - always try to free Jitter RNG instance crypto: marvell/octeontx - Fix a potential NULL dereference crypto: algboss - don't wait during notifier callback crypto: caam - fix typos crypto: ccp - Fix sparse warnings in sev-dev crypto: hisilicon - Cap block size at 2^31 crypto: algif_skcipher - Cap recv SG list at ctx->used hwrng: ks-sa - Fix runtime PM imbalance on error
2020-06-20Merge tag 'scsi-fixes' of ↵Linus Torvalds9-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error
2020-06-20Merge branch 'i2c/for-current' of ↵Linus Torvalds4-38/+8
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules
2020-06-20r8169: fix firmware not resetting tp->ocp_baseHeiner Kallweit1-1/+4
Typically the firmware takes care that tp->ocp_base is reset to its default value. That's not the case (at least) for RTL8117. As a result subsequent PHY access reads/writes the wrong page and the link is broken. Fix this be resetting tp->ocp_base explicitly. Fixes: 229c1e0dfd3d ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: Aaron Ma <mapengyu@gmail.com> Tested-by: Aaron Ma <mapengyu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20ibmvnic: continue to init in CRQ reset returns H_CLOSEDDany Madden1-2/+7
Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20ionic: tame the watchdog timer on reconfigShannon Nelson1-7/+8
Even with moving netif_tx_disable() to an earlier point when taking down the queues for a reconfiguration, we still end up with the occasional netdev watchdog Tx Timeout complaint. The old method of using netif_trans_update() works fine for queue 0, but has no effect on the remaining queues. Using netif_device_detach() allows us to signal to the watchdog to ignore us for the moment. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20pinctrl: single: fix function name in documentationDrew Fustini1-1/+1
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge tag 'libnvdimm-for-5.8-rc2' of ↵Linus Torvalds1-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "A feature (papr_scm health retrieval) and a fix (sysfs attribute visibility) for v5.8. Vaibhav explains in the merge commit below why missing v5.8 would be painful and I agreed to try a -rc2 pull because only cosmetics kept this out of -rc1 and his initial versions were posted in more than enough time for v5.8 consideration: 'These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months' Summary: - Fix the visibility of the region 'align' attribute. The new unit tests for region alignment handling caught a corner case where the alignment cannot be specified if the region is converted from static to dynamic provisioning at runtime. - Add support for device health retrieval for the persistent memory supported by the papr_scm driver. This includes both the standard sysfs "health flags" that the nfit persistent memory driver publishes and a mechanism for the ndctl tool to retrieve a health-command payload" * tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/region: always show the 'align' attribute powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl() powerpc/papr_scm: Fetch nvdimm health information from PHYP seq_buf: Export seq_buf_printf powerpc: Document details on H_SCM_HEALTH hcall
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan1-1/+2
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource ↵Haibo Chen1-4/+3
leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge tag 's390-5.8-2' of ↵Linus Torvalds5-94/+47
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update
2020-06-19ibmveth: Fix max MTU limitThomas Falcon1-1/+1
The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: flow_offload: fix flow_indr_dev_unregister pathwenxu5-11/+11
If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path. Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19flow_offload: use flow_indr_block_cb_alloc/remove functionwenxu4-22/+40
Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove function and remove the __flow_block_indr_binding. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19geneve: allow changing DF behavior after creationSabrina Dubroca1-0/+1
Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19enetc: Fix HW_VLAN_CTAG_TX|RX togglingClaudiu Manoil3-16/+34
VLAN tag insertion/extraction offload is correctly activated at probe time but deactivation of this feature (i.e. via ethtool) is broken. Toggling works only for Tx/Rx ring 0 of a PF, and is ignored for the other rings, including the VF rings. To fix this, the existing VLAN offload toggling code was extended to all the rings assigned to a netdevice, instead of the default ring 0 (likely a leftover from the early validation days of this feature). And the code was moved to the common set_features() function to fix toggling for the VF driver too. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: macb: undo operations in case of failureClaudiu Beznea1-2/+4
Undo previously done operation in case macb_phylink_connect() fails. Since macb_reset_hw() is the 1st undo operation the napi_exit label was renamed to reset_hw. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: phy: Check harder for errors in get_phy_id()Florian Fainelli1-2/+4
Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19of: of_mdio: Correct loop scanning logicFlorian Fainelli1-2/+7
Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-15/+36
Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce
2020-06-19Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-13/+18
Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases
2020-06-19net: ethernet: oki-semi: pch_gbe: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "Triger" --> "Trigger" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: ethernet: neterion: vxge: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds28-429/+828
Pull drm fixes from Dave Airlie: "Just i915 and amd here. i915 has some workaround movement so they get applied at the right times, and a timeslicing fix, along with some display fixes. AMD has a few display floating point fix and a devcgroup fix for amdkfd. i915: - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix" * tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amdgpu: fix documentation around busy_percentage drm/amdgpu/pm: update comment to clarify Overdrive interfaces drm/amdkfd: Use correct major in devcgroup check drm/i915/display: Fix the encoder type check drm/i915/icl+: Fix hotplug interrupt disabling after storm detection drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move snb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workarounds drm/i915/icl: Disable DIP on MST ports with the transcoder clock still on drm/i915/gt: Incrementally check for rewinding drm/i915/tc: fix the reset of ln0 drm/i915/gt: Prevent timeslicing into unpreemptable requests drm/i915/selftests: Restore to default heartbeat drm/i915: work around false-positive maybe-uninitialized warning drm/i915/pmu: avoid an maybe-uninitialized warning drm/i915/gt: Incorporate the virtual engine into timeslicing drm/amd/display: Rework dsc to isolate FPU operations ...
2020-06-19Merge tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds1-1/+3
Pull ceph fixes from Ilya Dryomov: "An important follow-up for replica reads support that went into -rc1 and two target_copy() fixups" * tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client: libceph: don't omit used_replica in target_copy() libceph: don't omit recovery_deletes in target_copy() libceph: move away from global osd_req_flags
2020-06-19RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()Fan Guo1-0/+1
If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com Signed-off-by: Fan Guo <guofan5@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-19i2c: smbus: Fix spelling mistake in the commentsKeyur Patel1-1/+1
Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel <iamkeyur96@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19i2c: remove deprecated i2c_new_device APIWolfram Sang1-25/+0
All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 21:29:41 +0000