summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24i2c: algo: Use generic definitions for bus frequenciesAndy Shevchenko1-3/+3
Since we have generic definitions for bus frequencies, let's use them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: stm32f7: switch to I²C generic property parsingAndy Shevchenko1-31/+26
Switch to the new generic functions: i2c_parse_fw_timings(). While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()Andy Shevchenko1-9/+9
Move i2c_parse_fw_timings() to rcar_i2c_clock_calculate() to consolidate timings calls in one place. While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: core: Allow override timing properties with 0Andy Shevchenko2-14/+18
Some drivers may allow to override properties with 0 value when defaults are not in use, thus, replace memset() with corresponding per property update. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: core: Provide generic definitions for bus frequenciesAndy Shevchenko2-5/+5
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core. The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines. Note, the name of modes are chosen to follow well established naming scheme [1]. These definitions will also help to avoid typos in the numbers that may lead to subtle errors. [1]: https://en.wikipedia.org/wiki/I%C2%B2C#Differences_between_modes Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24Merge tag 'at24-updates-for-v5.7' of ↵Wolfram Sang1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.7 at24 updates for v5.7 - add a new ACPI ID for 24c1024
2020-03-22i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi1-3/+3
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: imx: remove duplicate print after platform_get_irq()Tang Bin1-3/+1
We don't need dev_err() message because when something goes wrong, platform_get_irq() has print an error message itself, so we should remove duplicate dev_err(). Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Fix spelling typos in the commentsAndy Shevchenko5-8/+8
Fix spelling typos in the comments with help of `codespell`. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Discard i2c_dw_read_comp_param() functionSerge Semin2-7/+0
There is no code left in the kernel which would be using the function. So just remove it. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Detect the FIFO size in the common codeSerge Semin5-24/+27
The problem with detecting the FIFO depth in the platform driver is that in order to implement this we have to access the controller IC_COMP_PARAM_1 register. Currently it's done before the i2c_dw_set_reg_access() method execution, which is errors prone since the method determines the registers endianness and access mode and we can't use dw_readl/dw_writel accessors before this information is retrieved. We also can't move the i2c_dw_set_reg_access() function invocation to after the master/slave probe functions call (when endianness and access mode are determined), since the FIFO depth information is used by them for initializations. So in order to fix the problem we have no choice but to move the FIFO size detection methods to the common code and call it at the probe stage. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-20i2c: dev: Fix the race between the release of i2c_dev and cdevKevin Hao1-22/+26
The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d7fda to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Drop of_platform.h includeStephen Boyd1-1/+0
This driver doesn't call any DT platform functions like of_platform_*(). Remove the include as it isn't used. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Grow a dev pointer to simplify codeStephen Boyd1-31/+26
Some lines are long here. Use a struct dev pointer to shorten lines and simplify code. The clk_get() call can fail because of EPROBE_DEFER problems too, so just remove the error print message because it isn't useful. Finally, platform_get_irq() already prints an error so just remove that error message. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Let firmware specify irq trigger flagsStephen Boyd1-2/+2
We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables should take care of this for us. Just use 0 instead so that we use the flags from the firmware. Also, remove specify dev_name() for the irq name so that we can get better information in /proc/interrupts about which device is generating interrupts. Cc: Alok Chauhan <alokc@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: stm32f7: do not backup read-only PECR registerAlain Volmat1-4/+0
The PECR register provides received packet computed PEC value.  It makes no sense restoring its value after a reset, and anyway, as read-only register it cannot be restored. Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: smbus: remove outdated references to irq level triggersWolfram Sang1-5/+0
IRQ levels are now handled within the IRQ core. Remove the forgotten references from the documentation. Fixes: 9b9f2b8bc2ac ("i2c: i2c-smbus: Use threaded irq for smbalert") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: convert SMBus alert setup function to return an ERRPTRWolfram Sang5-24/+32
Only few drivers use this call, so drivers and I2C core are converted at once with this patch. By simply using i2c_new_client_device() instead of i2c_new_device(), we easily can return an ERRPTR for this function as well. To make out of tree users aware that something changed, the function is renamed to i2c_new_smbus_alert_device(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: stm32f7: add a new st, stm32mp15-i2c compatibleAlain Volmat1-6/+33
Add a new stm32mp15 specific compatible to handle FastMode+ registers handling which is different on the stm32mp15 compared to the stm32f7 or stm32h7. Indeed, on the stm32mp15, the FastMode+ set and clear registers are separated while on the other platforms (F7 or H7) the control is done in a unique register. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: stm32f7: disable/restore Fast Mode Plus bits in low power modesAlain Volmat1-13/+39
Defer the initial enabling of the Fast Mode Plus bits after the stm32f7_i2c_setup_timing call in probe function in order to avoid enabling them if speed is downgraded. Clear & restore the Fast Mode Plus bits in the suspend/resume handlers of the driver. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: brcmstb: Support BCM2711 HDMI BSC controllersMaxime Ripard1-0/+33
The HDMI blocks in the BCM2771 have an i2c controller to retrieve the EDID. This block is split into two parts, the BSC and the AUTO_I2C, lying in two separate register areas. The AUTO_I2C block has a mailbox-like interface and will take away the BSC control from the CPU if enabled. However, the BSC is the actually the same controller than the one supported by the brcmstb driver, and the AUTO_I2C doesn't really bring any immediate benefit. Let's use the BSC then, but let's also tie the AUTO_I2C registers with a separate compatible so that we can enable AUTO_I2C if needed in the future. The AUTO_I2C is enabled by default at boot though, so we first need to release the BSC from the AUTO_I2C control. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-i2c@vger.kernel.org Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: omap: use devm_platform_ioremap_resource()chenqiwu1-3/+1
Use a new API devm_platform_ioremap_resource() to simplify code. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Tested-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: use kobj_to_dev() APIchenqiwu1-2/+2
Use kobj_to_dev() API instead of container_of(). Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: powermac: correct comment about custom handlingWolfram Sang1-8/+7
The comment had some flaws which are now fixed: - the prefix is 'MAC' not 'AAPL' - no kernel coding style and too short length - 'we do' instead of 'we to' Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-26i2c: dev: keep sorting of includesWolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-26i2c: stm32f7: allow controller to be wakeup-sourceAlain Volmat1-21/+86
Allow the i2c-stm32f7 controller to become a wakeup-source of the system. In such case, when a slave is registered to the I2C controller, receiving a I2C message targeting that registered slave address wakes up the suspended system. In order to be able to wake-up, the I2C controller DT node must have the property wakeup-source defined and a slave must be registered. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-26i2c: imx: implement master_xfer_atomic callbackStefan Lengfeld1-41/+105
Rework the read and write code paths in the driver to support operation in atomic contexts. To achieve this, the driver must not rely on IRQs and not call schedule(), e.g. via a sleep routine, in these cases. With this patch the driver supports normal operation, DMA transfers and now the polling mode or also called sleep-free or IRQ-less operation. It makes the code not simpler or easier to read, but atomic I2C transfers are needed on some hardware configurations, e.g. to trigger reboots on an external PMIC chip. Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu> [m.felsch@pengutronix.de: integrate https://patchwork.ozlabs.org/patch/1085943/ review feedback] [m.felsch@pengutronix.de: adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Lengfeld <contact@stefanchrist.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-26i2c: at91: implement i2c bus recoveryKamel Bouhara2-0/+82
Implement i2c bus recovery when slaves devices might hold SDA low. In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses until the slave release SDA. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-22Merge tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-blockLinus Torvalds3-2/+16
Pull block fixes from Jens Axboe: "Just a set of NVMe fixes via Keith" * tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block: nvme-multipath: Fix memory leak with ana_log_buf nvme: Fix uninitialized-variable warning nvme-pci: Use single IRQ vector for old Apple models nvme/pci: Add sleep quirk for Samsung and Toshiba drives
2020-02-22Merge tag 'scsi-fixes' of ↵Linus Torvalds4-16/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four non-core fixes. Two are reverts of target fixes which turned out to have unwanted side effects, one is a revert of an RDMA fix with the same problem and the final one fixes an incorrect warning about memory allocation failures in megaraid_sas (the driver actually reduces the allocation size until it succeeds)" Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session" scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout" scsi: megaraid_sas: silence a warning scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
2020-02-22Merge tag 'hwmon-for-v5.6-rc3' of ↵Linus Torvalds2-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix crash in w83627ehf driver seen with W83627DHG-P - Fix lockdep splat in acpi_power_meter driver - Fix xdpe12284 documentation Sphinx warnings * tag 'hwmon-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Fix crash seen with W83627DHG-P hwmon: (acpi_power_meter) Fix lockdep splat Documentation/hwmon: fix xdpe12284 Sphinx warnings
2020-02-22Merge tag 's390-5.6-4' of ↵Linus Torvalds8-37/+39
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. * tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: fill SBALEs with absolute addresses s390/qdio: fill SL with absolute addresses s390: remove obsolete ieee_emulation_warnings s390: make 'install' not depend on vmlinux s390/kaslr: Fix casts in get_random s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range s390/pkey/zcrypt: spelling s/crytp/crypt/ s390/cio: use kobj_to_dev() API s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST s390/cio: cio_ignore_proc_seq_next should increase position index
2020-02-21Merge tag 'for-linus-5.6-rc3-tag' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two small fixes for Xen: - a fix to avoid warnings with new gcc - a fix for incorrectly disabled interrupts when calling _cond_resched()" * tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Enable interrupts when calling _cond_resched() x86/xen: Distribute switch variables for initialization
2020-02-21Merge tag 'linux-watchdog-5.6-rc3' of ↵Linus Torvalds2-7/+14
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt needs RESET_CONTROLLER to build - da9062 driver fixes: - fix power management ops - do not ping the hw during stop() - add dependency on I2C * tag 'linux-watchdog-5.6-rc3' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: Add dependency on I2C watchdog: da9062: fix power management ops watchdog: da9062: do not ping the hw during stop() watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
2020-02-21Merge tag 'char-misc-5.6-rc3' of ↵Linus Torvalds3-3/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.6-rc3. Also included in here are some updates for some documentation files that I seem to be maintaining these days. The driver fixes are: - small fixes for the habanalabs driver - fsi driver bugfix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Swap out the ambassador for Canonical habanalabs: patched cb equals user cb in device memset habanalabs: do not halt CoreSight during hard reset habanalabs: halt the engines before hard-reset MAINTAINERS: remove unnecessary ':' characters fsi: aspeed: add unspecified HAS_IOMEM dependency COPYING: state that all contributions really are covered by this file Documentation/process: Change Microsoft contact for embargoed hardware issues embargoed-hardware-issues: drop Amazon contact as the email address now bounces Documentation/process: Add Arm contact for embargoed HW issues
2020-02-21Merge tag 'staging-5.6-rc3' of ↵Linus Torvalds11-1530/+56
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.6-rc3, along with the removal of an unused/unneeded driver as well. The android vsoc driver is not needed anymore by anyone, so it was removed. The other driver fixes are: - ashmem bugfixes - greybus audio driver bugfix - wireless driver bugfixes and tiny cleanups to error paths All of these have been in linux-next for a while now with no reported issues" * tag 'staging-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: Remove unneeded goto statements staging: rtl8188eu: Remove some unneeded goto statements staging: rtl8723bs: Fix potential overuse of kernel memory staging: rtl8188eu: Fix potential overuse of kernel memory staging: rtl8723bs: Fix potential security hole staging: rtl8188eu: Fix potential security hole staging: greybus: use after free in gb_audio_manager_remove_all() staging: android: Delete the 'vsoc' driver staging: rtl8723bs: fix copy of overlapping memory staging: android: ashmem: Disallow ashmem memory from being remapped staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.
2020-02-21Merge tag 'tty-5.6-rc3' of ↵Linus Torvalds15-51/+102
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 5.6-rc3 that resolve a bunch of reported issues. They are: - vt selection and ioctl fixes - serdev bugfix - atmel serial driver fixes - qcom serial driver fixes - other minor serial driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: selection, close sel_buffer race vt: selection, handle pending signals in paste_selection serial: cpm_uart: call cpm_muram_init before registering console tty: serial: qcom_geni_serial: Fix RX cancel command failure serial: 8250: Check UPF_IRQ_SHARED in advance tty: serial: imx: setup the correct sg entry for tx dma vt: vt_ioctl: fix race in VT_RESIZEX vt: fix scrollback flushing on background consoles tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode serdev: ttyport: restore client ops on deregistration serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
2020-02-21Merge tag 'usb-5.6-rc3' of ↵Linus Torvalds23-122/+306
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt fixes from Greg KH: "Here are a number of small USB driver fixes for 5.6-rc3. Included in here are: - MAINTAINER file updates - USB gadget driver fixes - usb core quirk additions and fixes for regressions - xhci driver fixes - usb serial driver id additions and fixes - thunderbolt bugfix Thunderbolt patches come in through here now that USB4 is really thunderbolt. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits) USB: misc: iowarrior: add support for the 100 device thunderbolt: Prevent crash if non-active NVMem file is read usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format USB: misc: iowarrior: add support for the 28 and 28L devices USB: misc: iowarrior: add support for 2 OEMed devices USB: Fix novation SourceControl XL after suspend xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2 Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables" MAINTAINERS: Sort entries in database for THUNDERBOLT usb: dwc3: debug: fix string position formatting mixup with ret and len usb: gadget: serial: fix Tx stall after buffer overflow usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows usb: dwc2: Fix in ISOC request length checking usb: gadget: composite: Support more than 500mA MaxPower usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus usb: gadget: u_audio: Fix high-speed max packet size usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields USB: core: clean up endpoint-descriptor parsing USB: quirks: blacklist duplicate ep on Sound Devices USBPre2 ...
2020-02-21Merge tag 'drm-fixes-2020-02-21' of git://anongit.freedesktop.org/drm/drmLinus Torvalds48-241/+480
Pull drm fixes from Dave Airlie: "Varied fixes for rc3. i915 is the largest, they are seeing some ACPI problems with their CI which hopefully get solved soon [1]. msm has a bunch of fixes for new hw added in the merge, a bunch of amdgpu fixes, and nouveau adds support for some new firmwares for turing tu11x GPUs that were just released into linux-firmware by nvidia, they operate the same as the ones we already have for tu10x so should be fine to hook up. Otherwise it's just misc fixes for panfrost and sun4i. core: - Allow only one rotation argument, and allow zero rotation in video cmdline. i915: - Workaround missing Display Stream Compression (DSC) state readout by forcing modeset when its enabled at probe - Fix EHL port clock voltage level requirements - Fix queuing retire workers on the virtual engine - Fix use of partially initialized waiters - Stop using drm_pci_alloc/drm_pci/free - Fix rewind of RING_TAIL by forcing a context reload - Fix locking on resetting ring->head - Propagate our bug filing URL change to stable kernels panfrost: - Small compiler warning fix for panfrost. - Fix when using performance counters in panfrost when using per fd address space. sun4xi: - Fix dt binding nouveau: - tu11x modesetting fix - ACR/GR firmware support for tu11x (fw is public now) msm: - fix UBWC on GPU and display side for sc7180 - fix DSI suspend/resume issue encountered on sc7180 - fix some breakage on so called "linux-android" devices (fallout from sc7180/a618 support, not seen earlier due to bootloader/firmware differences) - couple other misc fixes amdgpu: - HDCP fixes - xclk fix for raven - GFXOFF fixes" [1] The Intel suspend testing should now be fixed by commit 63fb9623427f ("ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()") * tag 'drm-fixes-2020-02-21' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amdgpu/display: clean up hdcp workqueue handling drm/amdgpu: add is_raven_kicker judgement for raven1 drm/i915/gt: Avoid resetting ring->head outside of its timeline mutex drm/i915/execlists: Always force a context reload when rewinding RING_TAIL drm/i915: Wean off drm_pci_alloc/drm_pci_free drm/i915/gt: Protect defer_request() from new waiters drm/i915/gt: Prevent queuing retire workers on the virtual engine drm/i915/dsc: force full modeset whenever DSC is enabled at probe drm/i915/ehl: Update port clock voltage level requirements drm/i915: Update drm/i915 bug filing URL MAINTAINERS: Update drm/i915 bug filing URL drm/i915: Initialise basic fence before acquiring seqno drm/i915/gem: Require per-engine reset support for non-persistent contexts drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets drm/nouveau/gr/tu11x: initial support drm/nouveau/acr/tu11x: initial support drm/amdgpu/gfx10: disable gfxoff when reading rlc clock drm/amdgpu/gfx9: disable gfxoff when reading rlc clock drm/amdgpu/soc15: fix xclk for raven drm/amd/powerplay: always refetch the enabled features status on dpm enablement ...
2020-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds50-253/+542
Pull networking fixes from David Miller: 1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from Cong Wang. 2) Fix deadlock in xsk by publishing global consumer pointers when NAPI is finished, from Magnus Karlsson. 3) Set table field properly to RT_TABLE_COMPAT when necessary, from Jethro Beekman. 4) NLA_STRING attributes are not necessary NULL terminated, deal wiht that in IFLA_ALT_IFNAME. From Eric Dumazet. 5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov. 6) Handle mtu==0 devices properly in wireguard, from Jason A. Donenfeld. 7) Fix several lockdep warnings in bonding, from Taehee Yoo. 8) Fix cls_flower port blocking, from Jason Baron. 9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen. 10) Fix RDMA race in qede driver, from Michal Kalderon. 11) Fix several false lockdep warnings by adding conditions to list_for_each_entry_rcu(), from Madhuparna Bhowmik. 12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen. 13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song. 14) Hey, variables declared in switch statement before any case statements are not initialized. I learn something every day. Get rids of this stuff in several parts of the networking, from Kees Cook. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs. bnxt_en: Improve device shutdown method. net: netlink: cap max groups which will be considered in netlink_bind() net: thunderx: workaround BGX TX Underflow issue ionic: fix fw_status read net: disable BRIDGE_NETFILTER by default net: macb: Properly handle phylink on at91rm9200 s390/qeth: fix off-by-one in RX copybreak check s390/qeth: don't warn for napi with 0 budget s390/qeth: vnicc Fix EOPNOTSUPP precedence openvswitch: Distribute switch variables for initialization net: ip6_gre: Distribute switch variables for initialization net: core: Distribute switch variables for initialization udp: rehash on disconnect net/tls: Fix to avoid gettig invalid tls record bpf: Fix a potential deadlock with bpf_map_do_batch bpf: Do not grab the bucket spinlock by default on htab batch ops ice: Wait for VF to be reset/ready before configuration ice: Don't tell the OS that link is going down ice: Don't reject odd values of usecs set by user ...
2020-02-21ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()Rafael J. Wysocki2-0/+52
Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") overlooked the fact that fixed events can wake up the system too and broke RTC wakeup from suspend-to-idle as a result. Fix this issue by checking the fixed events in acpi_s2idle_wake() in addition to checking wakeup GPEs and break out of the suspend-to-idle loop if the status bits of any enabled fixed events are set then. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21hwmon: (w83627ehf) Fix crash seen with W83627DHG-PGuenter Roeck1-1/+6
Loading the driver on a system with W83627DHG-P crashes as follows. w83627ehf: Found W83627DHG-P chip at 0x290 BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 604 Comm: sensors Not tainted 5.6.0-rc2-00055-gca7e1fd1026c #29 Hardware name: /D425KT, BIOS MWPNT10N.86A.0132.2013.0726.1534 07/26/2013 RIP: 0010:w83627ehf_read_string+0x27/0x70 [w83627ehf] Code: [... ] RSP: 0018:ffffb95980657df8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff96caaa7f5218 RCX: 0000000000000000 RDX: 0000000000000015 RSI: 0000000000000001 RDI: ffff96caa736ec08 RBP: 0000000000000000 R08: ffffb95980657e20 R09: 0000000000000001 R10: ffff96caaa635cc0 R11: 0000000000000000 R12: ffff96caa9f7cf00 R13: ffff96caa9ec3d00 R14: ffff96caa9ec3d28 R15: ffff96caa9ec3d40 FS: 00007fbc7c4e2740(0000) GS:ffff96caabc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000129d58000 CR4: 00000000000006f0 Call Trace: ? cp_new_stat+0x12d/0x160 hwmon_attr_show_string+0x37/0x70 [hwmon] dev_attr_show+0x14/0x50 sysfs_kf_seq_show+0xb5/0x1b0 seq_read+0xcf/0x460 vfs_read+0x9b/0x150 ksys_read+0x5f/0xe0 do_syscall_64+0x48/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... Temperature labels are not always present. Adjust sysfs attribute visibility accordingly. Reported-by: Meelis Roos <mroos@linux.ee> Suggested-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org> Cc: Meelis Roos <mroos@linux.ee> Cc: Dr. David Alan Gilbert <linux@treblig.org> Fixes: 266cd5835947 ("hwmon: (w83627ehf) convert to with_info interface") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-21nvme-multipath: Fix memory leak with ana_log_bufLogan Gunthorpe1-0/+1
kmemleak reports a memory leak with the ana_log_buf allocated by nvme_mpath_init(): unreferenced object 0xffff888120e94000 (size 8208): comm "nvme", pid 6884, jiffies 4295020435 (age 78786.312s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e2360188>] kmalloc_order+0x97/0xc0 [<0000000079b18dd4>] kmalloc_order_trace+0x24/0x100 [<00000000f50c0406>] __kmalloc+0x24c/0x2d0 [<00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0 [<000000005802589e>] nvme_init_identify+0x75f/0x1600 [<0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280 [<00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710 [<00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9 [<000000004199f8d0>] __vfs_write+0x50/0xa0 [<0000000065466fef>] vfs_write+0xf3/0x280 [<00000000b0db9a8b>] ksys_write+0xc6/0x160 [<0000000082156b91>] __x64_sys_write+0x43/0x50 [<00000000c34fbb6d>] do_syscall_64+0x77/0x2f0 [<00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe nvme_mpath_init() is called by nvme_init_identify() which is called in multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This means nvme_mpath_init() may be called multiple times before nvme_mpath_uninit() (which is only called on nvme_free_ctrl()). When nvme_mpath_init() is called multiple times, it overwrites the ana_log_buf pointer with a new allocation, thus leaking the previous allocation. To fix this, free ana_log_buf before allocating a new one. Fixes: 0d0b660f214dc490 ("nvme: add ANA support") Cc: <stable@vger.kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-02-21Merge tag 'drm-intel-fixes-2020-02-20' of ↵Dave Airlie18-107/+167
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc3: - Workaround missing Display Stream Compression (DSC) state readout by forcing modeset when its enabled at probe - Fix EHL port clock voltage level requirements - Fix queuing retire workers on the virtual engine - Fix use of partially initialized waiters - Stop using drm_pci_alloc/drm_pci/free - Fix rewind of RING_TAIL by forcing a context reload - Fix locking on resetting ring->head - Propagate our bug filing URL change to stable kernels Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2sxtsrd.fsf@intel.com
2020-02-21Merge tag 'drm-misc-fixes-2020-02-20' of ↵Dave Airlie9-21/+40
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.6-rc3: - Fix dt binding for sunxi. - Allow only 1 rotation argument, and allow 0 rotation in video cmdline. - Small compiler warning fix for panfrost. - Fix when using performance counters in panfrost when using per fd address space. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f5a6370d-9898-6c72-43e4-5bb56a99b6f2@linux.intel.com
2020-02-20bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.Vasundhara Volam1-0/+8
If crashed kernel does not shutdown the NIC properly, PCIe FLR is required in the kdump kernel in order to initialize all the functions properly. Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20bnxt_en: Improve device shutdown method.Vasundhara Volam1-2/+2
Especially when bnxt_shutdown() is called during kexec, we need to disable MSIX and disable Bus Master to completely quiesce the device. Make these 2 calls unconditionally in the shutdown method. Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: thunderx: workaround BGX TX Underflow issueTim Harvey2-3/+68
While it is not yet understood why a TX underflow can easily occur for SGMII interfaces resulting in a TX wedge. It has been found that disabling/re-enabling the LMAC resolves the issue. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Robert Jones <rjones@gateworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20ionic: fix fw_status readShannon Nelson2-4/+8
The fw_status field is only 8 bits, so fix the read. Also, we only want to look at the one status bit, to allow for future use of the other bits, and watch for a bad PCI read. Fixes: 97ca486592c0 ("ionic: add heartbeat check") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: macb: Properly handle phylink on at91rm9200Alexandre Belloni2-28/+33
at91ether_init was handling the phy mode and speed but since the switch to phylink, the NCFGR register got overwritten by macb_mac_config(). The issue is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared but never restored as they conflict with the PAE, GBE and PCSSEL bits. Add new capability to differentiate between EMAC and the other versions of the IP and use it to set and avoid clearing the relevant bits. Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC doesn't use any rings/bufffers/queues. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 18:28:16 +0000