| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a number of bugs in the caam driver:
- device creation fails after release
- error-path NULL-pointer dereference
- spurious hardware error in RNG deinstantiation"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix RNG deinstantiation error checking
crypto: caam - fix invalid dereference in caam_rsa_init_tfm()
crypto: caam - fix JR platform device subsequent (re)creations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver rfixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 4.11-rc6.
Nothing big here, just iio fixes for reported issues, and an ashmem
fix for a very old bug that has been reported by a number of Android
vendors"
* tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
iio: hid-sensor-attributes: Fix sensor property setting failure.
iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
iio: st_pressure: initialize lps22hb bootime
iio: bmg160: reset chip when probing
iio: cros_ec_sensors: Fix return value to get raw and calibbias data.
|
|
Pull block fixes from Jens Axboe:
"Here's a pull request for 4.11-rc, fixing a set of issues mostly
centered around the new scheduling framework. These have been brewing
for a while, but split up into what we absolutely need in 4.11, and
what we can defer until 4.12. These are well tested, on both single
queue and multiqueue setups, and with and without shared tags. They
fix several hangs that have happened in testing.
This is obviously larger than I would have preferred at this point in
time, but I don't think we can shave much off this and still get the
desired results.
In detail, this pull request contains:
- a set of five fixes for NVMe, mostly from Christoph and one from
Roland.
- a series from Bart, fixing issues with dm-mq and SCSI shared tags
and scheduling. Note that one of those patches commit messages may
read like an optimization, but it is in fact an important fix for
queue restarts in particular.
- a series from Omar, most importantly fixing a hang with multiple
hardware queues when we fail to get a driver tag. Another important
fix in there is for resizing hardware queues, which nbd does when
handling multiple sockets for one connection.
- fixing an imbalance in putting the ctx for hctx request allocations
from Minchan"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: Restart a single queue if tag sets are shared
dm rq: Avoid that request processing stalls sporadically
scsi: Avoid that SCSI queues get stuck
blk-mq: Introduce blk_mq_delay_run_hw_queue()
blk-mq: remap queues when adding/removing hardware queues
blk-mq-sched: fix crash in switch error path
blk-mq-sched: set up scheduler tags when bringing up new queues
blk-mq-sched: refactor scheduler initialization
blk-mq: use the right hctx when getting a driver tag fails
nvmet: fix byte swap in nvmet_parse_io_cmd
nvmet: fix byte swap in nvmet_execute_write_zeroes
nvmet: add missing byte swap in nvmet_get_smart_log
nvme: add missing byte swap in nvme_setup_discard
nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
block: do not put mq context in blk_mq_alloc_request_hctx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"This late fix for pin control is hopefully the last I send this cycle.
The problem was detected early in the v4.11 release cycle and there
has been some back and forth on how to solve it. Sadly the proper fix
arrives late, but at least not too late.
An issue was detected with pin control on the Freescale i.MX after the
refactorings for more general group and function handling.
We now have the proper fix for this"
* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()
|
|
vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.
Comment From Greg Hackmann:
ashmem_llseek() passes the llseek() call through to the backing
shmem file. 91360b02ab48 ("ashmem: use vfs_llseek()") changed
this from directly calling the file's llseek() op into a VFS
layer call. This also adds a check for the FMODE_LSEEK bit, so
without that bit ashmem_llseek() now always fails with -ESPIPE.
Fixes: 91360b02ab48 ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Cc: stable <stable@vger.kernel.org> # 3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix ThunderX legacy firmware resources
- fix ARTPEC-6 and DesignWare platform driver NULL pointer dereferences
- fix HiSilicon link error
* tag 'pci-v4.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix dw_pcie_ops NULL pointer dereference
PCI: dwc: Select PCI_HOST_COMMON for hisi
PCI: thunder-pem: Fix legacy firmware PEM-specific resources
|
|
While running the srp-test software I noticed that request
processing stalls sporadically at the beginning of a test, namely
when mkfs is run against a dm-mpath device. Every time when that
happened the following command was sufficient to resume request
processing:
echo run >/sys/kernel/debug/block/dm-0/state
This patch avoids that such request processing stalls occur. The
test I ran is as follows:
while srp-test/run_tests -d -r 30 -t 02-mq; do :; done
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
driver that implements that function is responsible for rerunning the
hardware queue once requests can be queued again successfully.
commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped
queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq()
for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions
that are intended to rerun a busy queue such that these examine all
hardware queues instead of only stopped queues.
Since no other functions than scsi_internal_device_block() and
scsi_internal_device_unblock() should ever stop or restart a SCSI
queue, change the blk_mq_delay_queue() call into a
blk_mq_delay_run_hw_queue() call.
Fixes: commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped queues")
Fixes: commit 7e79dadce222 ("blk-mq: stop hardware queue in blk_mq_delay_queue()")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- two stable fixes for the verity target's FEC support
- a stable fix for raid target's raid1 support (when no bitmap is used)
- a 4.11 cache metadata v2 format fix to properly test blocks are clean
* tag 'dm-4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity fec: fix bufio leaks
dm raid: fix NULL pointer dereference for raid1 without bitmap
dm cache metadata: fix metadata2 format's blocks_are_clean_separate_dirty
dm verity fec: limit error correction recursion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes a core device enumeration code change made in 4.10, in
order to address a reported issue, that went too far.
Specifics:
- Refine the check for the existence of _HID in find_child_checks()
so that it doesn't trigger for device objects with device IDs made
up by the kernel (Rafael Wysocki)"
* tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Prefer devices without _HID for _ADR matching
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fix from Juergen Gross:
"A fix for error path cleanup in the xenbus handler"
* tag 'for-linus-4.11b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: remove transaction holder from list before freeing
|
|
* acpi-scan-fixes:
ACPI / scan: Prefer devices without _HID for _ADR matching
|
|
Recent pinctrl changes to allow dynamic allocation of pins exposed one
more issue with the pinctrl pins claimed early by the controller itself.
This caused a regression for IMX6 pinctrl hogs.
Before enabling the pin controller driver we need to wait until it has
been properly initialized, then claim the hogs, and only then enable it.
To fix the regression, split the code into pinctrl_claim_hogs() and
pinctrl_enable(). And then let's require that pinctrl_enable() is always
called by the pin controller driver when ready after calling
pinctrl_register_and_init().
Depends-on: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed
work for hogs")
Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for
managing groups")
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull networking fixes from David Miller:
1) Reject invalid updates to netfilter expectation policies, from Pablo
Neira Ayuso.
2) Fix memory leak in nfnl_cthelper, from Jeffy Chen.
3) Don't do stupid things if we get a neigh_probe() on a neigh entry
whose ops lack a solicit method. From Eric Dumazet.
4) Don't transmit packets in r8152 driver when the carrier is off, from
Hayes Wang.
5) Fix ipv6 packet type detection in aquantia driver, from Pavel
Belous.
6) Don't write uninitialized data into hw registers in bna driver, from
Arnd Bergmann.
7) Fix locking in ping_unhash(), from Eric Dumazet.
8) Make BPF verifier range checks able to understand certain sequences
emitted by LLVM, from Alexei Starovoitov.
9) Fix use after free in ipconfig, from Mark Rutland.
10) Fix refcount leak on force commit in openvswitch, from Jarno
Rajahalme.
11) Fix various overflow checks in AF_PACKET, from Andrey Konovalov.
12) Fix endianness bug in be2net driver, from Suresh Reddy.
13) Don't forget to wake TX queues when processing a timeout, from
Grygorii Strashko.
14) ARP header on-stack storage is wrong in flow dissector, from Simon
Horman.
15) Lost retransmit and reordering SNMP stats in TCP can be
underreported. From Yuchung Cheng.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits)
nfp: fix potential use after free on xdp prog
tcp: fix reordering SNMP under-counting
tcp: fix lost retransmit SNMP under-counting
sctp: get sock from transport in sctp_transport_update_pmtu
net: ethernet: ti: cpsw: fix race condition during open()
l2tp: fix PPP pseudo-wire auto-loading
bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_*
l2tp: take reference on sessions being dumped
tcp: minimize false-positives on TCP/GRO check
sctp: check for dst and pathmtu update in sctp_packet_config
flow dissector: correct size of storage for ARP
net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
l2tp: take a reference on sessions used in genetlink handlers
l2tp: hold session while sending creation notifications
l2tp: fix duplicate session creation
l2tp: ensure session can't get removed during pppol2tp_session_ioctl()
l2tp: fix race in l2tp_recv_common()
sctp: use right in and out stream cnt
bpf: add various verifier test cases for self-tests
bpf, verifier: fix rejection of unaligned access checks for map_value_adj
...
|
|
We should unregister the net_device first, before we give back
our reference on xdp_prog. Otherwise xdp_prog may be freed
before .ndo_stop() disabled the datapath. Found by code inspection.
Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RNG instantiation was previously fixed by
commit 62743a4145bb9 ("crypto: caam - fix RNG init descriptor ret. code checking")
while deinstantiation was not addressed.
Since the descriptors used are similar, in the sense that they both end
with a JUMP HALT command, checking for errors should be similar too,
i.e. status code 7000_0000h should be considered successful.
Cc: <stable@vger.kernel.org> # 3.13+
Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case caam_jr_alloc() fails, ctx->dev carries the error code,
thus accessing it with dev_err() is incorrect.
Cc: <stable@vger.kernel.org> # 4.8+
Fixes: 8c419778ab57e ("crypto: caam - add support for RSA algorithm")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The way Job Ring platform devices are created and released does not
allow for multiple create-release cycles.
JR0 Platform device creation error
JR0 Platform device creation error
caam 2100000.caam: no queues configured, terminating
caam: probe of 2100000.caam failed with error -12
The reason is that platform devices are created for each job ring:
for_each_available_child_of_node(nprop, np)
if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
ctrlpriv->jrpdev[ring] =
of_platform_device_create(np, NULL, dev);
which sets OF_POPULATED on the device node, but then it cleans these up:
/* Remove platform devices for JobRs */
for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
if (ctrlpriv->jrpdev[ring])
of_device_unregister(ctrlpriv->jrpdev[ring]);
}
which leaves OF_POPULATED set.
Use of_platform_populate / of_platform_depopulate instead.
This allows for a bit of driver clean-up, jrpdev is no longer needed.
Logic changes a bit too:
-exit in case of_platform_populate fails, since currently even QI backend
depends on JR; true, we no longer support the case when "some" of the JR
DT nodes are incorrect
-when cleaning up, caam_remove() would also depopulate RTIC in case
it would have been populated somewhere else - not the case for now
Cc: <stable@vger.kernel.org>
Fixes: 313ea293e9c4d ("crypto: caam - Add Platform driver for Job Ring")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull late GPIO fixes from Linus Walleij:
"Some late coming ACPI fixes for GPIO.
We're dealing with ACPI issues here. The first is related to wake IRQs
on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
is about proper probe deferral when reading _CRS properties.
For my untrained eye it seems there was some quarrel between the BIOS
and the kernel about who is supposed to deal with wakeups from GPIO
lines"
* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.11
iwlwifi
* an RCU fix
* a fix for a potential out-of-bounds access crash
* a fix for IBSS which has been broken since DQA was enabled
rtlwifi
* fix scheduling while atomic regression
brcmfmac
* fix use-after-free bug found by KASAN
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TI's cpsw driver handles both OF and non-OF case for phy
connect. Unfortunately of_phy_connect() returns NULL on
error while phy_connect() returns ERR_PTR().
To handle this, cpsw_slave_open() overrides the return value
from phy_connect() to make it NULL or error.
This leaves a small window, where cpsw_adjust_link() may be
invoked for a slave while slave->phy pointer is temporarily
set to -ENODEV (or some other error) before it is finally set
to NULL.
_cpsw_adjust_link() only handles the NULL case, and an oops
results when ERR_PTR() is seen by it.
Note that cpsw_adjust_link() checks PHY status for each
slave whenever it is invoked. It can so happen that even
though phy_connect() for a given slave returns error,
_cpsw_adjust_link() is still called for that slave because
the link status of another slave changed.
Fix this by using a temporary pointer to store return value
of {of_}phy_connect() and do a one-time write to slave->phy.
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reported-by: Yan Liu <yan-liu@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is just mostly stuff that missed rc5, from vmwgfx and msm
drivers"
* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
drm/vmwgfx: Remove getparam error message
drm/ttm: Avoid calling drm_ht_remove from atomic context
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: Type-check lookups of fence objects
|
|
Trival fix, rename HW_INTERRUT_ASSERT_SET_* to HW_INTERRUPT_ASSERT_SET_*
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After allocation the item is being placed on the list right away.
Consequently it needs to be taken off the list before freeing in the
case xenbus_dev_request_and_reply() failed, as in that case the
callback (xenbus_dev_queue_reply()) is not being called (and if it
was called, it should do both).
Fixes: 5584ea250ae44f929feb4c7bd3877d1c5edbf813
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Fix a crash from dereferencing a NULL dw_pcie_ops pointer. For example,
on ARTPEC-6:
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = c0204000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-next-20170321 #1
Hardware name: Axis ARTPEC-6 Platform
task: db098000 task.stack: db096000
PC is at dw_pcie_writel_dbi+0x2c/0xd0
Prior to 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into
host-only and core structures"), every driver had a struct pcie_host_ops
with function pointers, typically used as:
if (pp->ops->readl_rc)
return pp->ops->readl_rc(...);
442ec4c04d12 split struct pcie_host_ops into two pieces: struct
dw_pcie_host_ops and struct dw_pcie_ops, so the above became:
if (pci->ops->readl_dbi)
return pci->ops->readl_dbi(...);
But pcie-artpec6.c and pcie-designware-plat.c don't need the dw_pcie_ops
pointers and didn't supply a pci->ops struct, which leads to NULL pointer
dereferences.
Supply an empty struct dw_pcie_ops to avoid the NULL pointer dereferences.
[bhelgaas: changelog]
Fixes: 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
|
|
git://people.freedesktop.org/~robclark/linux into drm-fixes
misc msm fixes.
* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
|
|
Without PCI_HOST_COMMON support enabled, we get a link error:
drivers/pci/dwc/built-in.o: In function `hisi_pcie_map_bus':
pcie-hisi.c:(.text+0x8860): undefined reference to `pci_ecam_map_bus'
drivers/pci/dwc/built-in.o: In function `hisi_pcie_almost_ecam_probe':
pcie-hisi.c:(.text+0x88b4): undefined reference to `pci_host_common_probe'
Add an explicit 'select', as the other users have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
|
|
SZ_16M PEM resource size includes PEM-specific register and its children
resources. Reservation of the whole SZ_16M range leads to child device
driver failure when pcieport driver is requesting resources:
pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed
So we cannot reserve full 16M here and instead we want to reserve
PEM-specific register only which is SZ_64K.
At the end increase PEM resource to SZ_16M since this is what
thunder_pem_init() call expects for proper initialization.
Fixes: 9abb27c7594a ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller")
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.10+
|
|
We should be detaching the MMU before destroying the address
space. To do this cleanly, the detach has to happen in
adreno_gpu_cleanup() because it needs access to structs
in adreno_gpu.c. Plus it is better symmetry to have
the attach and detach at the same code level.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
4 macros already defined in hdmi.h,
which is not required to redefine in hdmi_audio.c
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
'SSPP_MAX + 1' is the max number of hwpipes that can be present on a
MDP5 platform. Recently, 2 new cursor hwpipes were added, which
caused overflows in arrays that used SSPP_MAX to represent the number
of elements. Update the SSPP_MAX value to incorporate the extra
hwpipes.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.
Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.
Fixes: b62aa70a98c5 (drm/msm/dsi: Move PHY operations out of host)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Zero sized buffer objects tend to make various bits of the GEM
infrastructure complain:
WARNING: CPU: 1 PID: 2323 at drivers/gpu/drm/drm_mm.c:389 drm_mm_insert_node_generic+0x258/0x2f0
Modules linked in:
CPU: 1 PID: 2323 Comm: drm-api-test Tainted: G W 4.9.0-rc4-00906-g693af44 #213
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
task: ffff8000d7353400 task.stack: ffff8000d7720000
PC is at drm_mm_insert_node_generic+0x258/0x2f0
LR is at drm_vma_offset_add+0x4c/0x70
Zero sized buffers serve no appreciable value to the user so disallow
them at create time.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Instead of checking for a5xx_gpu->gpmu_iova during destroy we
accidently check a5xx_gpu->gpmu_bo.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The newly added a5xx support fails to build when debugfs is diabled:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'?
This adds a missing #ifdef.
Fixes: b5f103ab98c7 ("drm/msm: gpu: Add A5XX target support")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
Set of vmwgfx fixes
* 'vmwgfx-fixes-4.11' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
drm/vmwgfx: Remove getparam error message
drm/ttm: Avoid calling drm_ht_remove from atomic context
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: Type-check lookups of fence objects
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes, two of them for stable:
- avoid initrd corruptions in the kernel decompressor
- prevent inconsistent dumps if the boot CPU does not have address
zero
- fix the new pkey interface added with the merge window for 4.11
- a fix for a fix, another issue with user copy zero padding"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uaccess: get_user() should zero on failure (again)
s390/pkey: Fix wrong handling of secure key with old MKVP
s390/smp: fix ipl from cpu with non-zero address
s390/decompressor: fix initrd corruption caused by bss clear
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
4th set of IIO fixes for the 4.12 cycle.
core
- fix IIO_VAL_FRACTIONAL_LOG2 handling for negative values.
bmg160
- reset chip on probe to avoid a failure on some systems
cros_ec
- return type correctly when reading raw and calibbias data.
hid-sensor-accel
- fix a duplicate scan index error due to wrong number of channels
for gravity sensor.
hid-sensors
- ensure a get_feature is always done before the first set feature to
avoid issues with wrong cached values.
st-pressure
- initalize lps22hb boot time to avoid giving stale data.
|
|
In case, if TX watchdog is fired some or all netdev TX queues will be
stopped and as part of recovery it is required not only to drain and
reinitailize CPSW TX channeles, but also wake up stoppted TX queues what
doesn't happen now and netdevice will stop transmiting data until
reopenned.
Hence, add netif_tx_wake_all_queues() call in .ndo_tx_timeout() to complete
recovery and restore TX path.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A couple of minor fixes for 4.11:
- array bound fix for __get_unmap_pool()
- cyclic period splitting for bcm2835"
* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
dmaengine: bcm2835: Fix cyclic DMA period splitting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"This update provides:
- make the scheduler clock switch to unstable mode smooth so the
timestamps stay at microseconds granularity instead of switching to
tick granularity.
- unbreak perf test tsc by taking the new offset into account which
was added in order to proveide better sched clock continuity
- switching sched clock to unstable mode runs all clock related
computations which affect the sched clock output itself from a work
queue. In case of preemption sched clock uses half updated data and
provides wrong timestamps. Keep the math in the protected context
and delegate only the static key switch to workqueue context.
- remove a duplicate header include"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Remove duplicate #include <linux/sched/debug.h> line
sched/clock: Fix broken stable to unstable transfer
sched/clock, x86/perf: Fix "perf test tsc"
sched/clock: Fix clear_sched_clock_stable() preempt wobbly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Thomas Gleixner:
"Downgrade the missing ESRT header printk to warning level and remove a
useless error printk which just generates noise for no value"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/esrt: Cleanup bad memory map log messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the new CLKEVT_OF infrastructure"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vmlinux.lds: Add __clkevt_of_table to kernel
clockevents: Fix syntax error in clkevt-of macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two small fixlets:
- select a required Kconfig to make the MVEBU driver compile
- add the missing MIPS local GIC interrupts which prevent drivers to
probe successfully"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix Local compare interrupt
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
|
|
When system bootup without get sensor property, set sensor
property will be fail.
If no get_feature operation done before set_feature, the sensor
properties will all be the initialized value, which is not the
same with sensor real properties. When set sensor property it will
write back to sensor the changed perperty data combines with other
sensor properties data, it is not right and may be dangerous.
In order to get all sensor properties, choose to read one of the sensor
properties(no matter read any sensor peroperty, driver will get all
the peroperties and return the requested one).
Fixes: 73c6768b710a ("iio: hid-sensors: Common attribute and trigger")
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
When both accel_3d and gravity sensor are present, iio_device_register()
fails with "Duplicate scan index" error.
The reason for this is setting of indio_dev->num_channels based on
accel_3d channel for both gravity and accel-3d sensor. But number of
channels are not same, so for gravity it is pointing to some invalid
memory and getting scan_index to compare which may match.
To fix this issue, set the indio_dev->num_channels correctly based on
the sensor type.
Fixes: 0e377f3b9ae9 ('iio: Add gravity sensor support')
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fix formatting of negative values of type IIO_VAL_FRACTIONAL_LOG2 by
switching from do_div(), which can't handle negative numbers, to
div_s64_rem(). Also use shift_right for shifting, which is safe with
negative values.
Signed-off-by: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This patch initializes the bootime in struct st_sensor_settings for
lps22hb sensor. Without this, sensor channels read from sysfs always
report stale values.
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
