summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-01-10PM-runtime: Fix autosuspend_delay on 32bits archVincent Guittot1-2/+2
Cast autosuspend_delay to u64 to make sure that the full computation of 'expires' or slack will be done in u64, even on 32bits arch. Otherwise, any delay greater than 2^31 nsec can overflow if signed 32bits is used when converting delay from msec to nsec. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10PM-runtime: Fix 'jiffies' in comments after switch to hrtimersLadislav Michl1-2/+5
PM-runtime now uses the hrtimers infrastructure for autosuspend, however comments still reference 'jiffies'. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is setIlya Dryomov1-5/+4
There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-01-10drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclockIvan Mironov1-1/+6
Strict requirement of pixclock to be zero breaks support of SDL 1.2 which contains hardcoded table of supported video modes with non-zero pixclock values[1]. To better understand which pixclock values are considered valid and how driver should handle these values, I briefly examined few existing fbdev drivers and documentation in Documentation/fb/. And it looks like there are no strict rules on that and actual behaviour varies: * some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c); * some treat (pixclock == 0) as invalid value which leads to -EINVAL (clps711x-fb.c); * some pass converted pixclock value to hardware (uvesafb.c); * some are trying to find nearest value from predefined table (vga16fb.c, video_gx.c). Given this, I believe that it should be safe to just ignore this value if changing is not supported. It seems that any portable fbdev application which was not written only for one specific device working under one specific kernel version should not rely on any particular behaviour of pixclock anyway. However, while enabling SDL1 applications to work out of the box when there is no /etc/fb.modes with valid settings, this change affects the video mode choosing logic in SDL. Depending on current screen resolution, contents of /etc/fb.modes and resolution requested by application, this may lead to user-visible difference (not always): image will be displayed in a right way, but it will be aligned to the left instead of center. There is no "right behaviour" here as well, as emulated fbdev, opposing to old fbdev drivers, simply ignores any requsts of video mode changes with resolutions smaller than current. The easiest way to reproduce this problem is to install sdl-sopwith[2], remove /etc/fb.modes file if it exists, and then try to run sopwith from console without X. At least in Fedora 29, sopwith may be simply installed from standard repositories. [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings [2] http://sdl-sopwith.sourceforge.net/ Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Cc: stable@vger.kernel.org Fixes: 79e539453b34e ("DRM: i915: add mode setting support") Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware") Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
2019-01-10drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2Ivan Mironov1-53/+73
SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu <mail@saahriktu.org> Suggested-by: saahriktu <mail@saahriktu.org> Cc: stable@vger.kernel.org Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
2019-01-09loop: drop caches if offset or block_size are changedJaegeuk Kim1-2/+33
If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Reported-by: Martijn Coenen <maco@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09tty/serial: Add RISC-V SBI earlycon supportAnup Patel3-0/+41
In RISC-V, the M-mode runtime firmware provide SBI calls for debug prints. This patch adds earlycon support using RISC-V SBI console calls. To enable it, just pass "earlycon=sbi" in kernel parameters. Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-09drm/amdgpu: disable system memory page tables for nowChristian König1-3/+0
We hit a problem with IOMMU with that. Disable until we have time to debug further. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hangJim Qu1-1/+2
effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu <Jim.Qu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20Tao Zhou1-5/+5
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun.Li <yukun1.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09nvme: don't initlialize ctrl->cntlid twiceAndrey Smirnov1-1/+0
ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQNJames Dingwall3-7/+16
If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: James Dingwall <james@dingwall.me.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: pad fake subsys NQN vid and ssvid with zerosKeith Busch1-1/+1
We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-multipath: zero out ANA log bufferHannes Reinecke1-0/+2
When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-fabrics: unset write/poll queues for discovery controllersSagi Grimberg1-0/+2
Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: don't ask if controller is fabricsSagi Grimberg1-9/+6
For sure we are a fabric driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: remove dead codeSagi Grimberg1-1/+0
We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix out of bounds access in nvme_cqe_pendingHongbo Yao1-1/+3
There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> [hch: slight coding style update] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: rerun irq setup on IO queue init errorsKeith Busch1-14/+36
If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: use the same attributes when freeing host_mem_desc_bufs.Liviu Dudau1-4/+6
When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix the wrong setting of nr_mapsJianchao Wang1-1/+0
We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09Merge tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds1-35/+42
Pull arch/csky bug fixes from Guo Ren: "Here are some fixup patches for 5.0-rc1: - fix compile error with pte_alloc - fix handle_irq_perbit break irq flow - fix CACHEV1 store instruction fast retire - fix module relocation error with 807 & 860 - add csky kernel features to documentation" * tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux: irqchip/csky: fixup handle_irq_perbit break irq csky: fixup compile error with pte_alloc csky: fixup CACHEV1 store instruction fast retire csky: fixup relocation error with 807 & 860 Documentation/features: Add csky kernel features
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret1-2/+2
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.17+ <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09drm/bridge: tc358767: use DP connector if no panel setTomi Valkeinen1-1/+2
tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix output H/V syncsTomi Valkeinen1-1/+5
The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: reject modes which require too much BWTomi Valkeinen1-0/+10
The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix initial DP0/1_SRCCTRL valueTomi Valkeinen1-6/+5
Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix single lane configurationTomi Valkeinen1-2/+8
PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANETomi Valkeinen1-3/+7
DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: add bus flagsTomi Valkeinen1-0/+4
tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com
2019-01-09drm/i915/gvt: Fix workload request allocation before request addZhenyu Wang2-22/+43
In commit 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change"), forgot to handle workload scan path in ELSP handler case which was to optimize scanning earlier instead of in gvt submission thread, so request alloc and add was splitting then which is against right process. This trys to do a partial revert of that commit which still has workload request alloc helper and make sure shadow state population is handled after request alloc for target state buffer. v3: Fix missed workload status setting in request alloc error path v2: Fix dispatch workload err path that should add request after alloc anyway. Fixes: 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change") Cc: Bin Yang <bin.yang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Bin Yang <bin.yang@intel.com> Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-01-08zram: idle writeback fixes and cleanupMinchan Kim2-26/+69
This patch includes some fixes and cleanup for idle-page writeback. 1. writeback_limit interface Now writeback_limit interface is rather conusing. For example, once writeback limit budget is exausted, admin can see 0 from /sys/block/zramX/writeback_limit which is same semantic with disable writeback_limit at this moment. IOW, admin cannot tell that zero came from disable writeback limit or exausted writeback limit. To make the interface clear, let's sepatate enable of writeback limit to another knob - /sys/block/zram0/writeback_limit_enable * before: while true : # to re-enable writeback limit once previous one is used up echo 0 > /sys/block/zram0/writeback_limit echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget * new # To enable writeback limit, from the beginning, admin should # enable it. echo $((200<<20)) > /sys/block/zram0/writeback_limit echo 1 > /sys/block/zram/0/writeback_limit_enable while true : echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget It's much strightforward. 2. fix condition check idle/huge writeback mode check The mode in writeback_store is not bit opeartion any more so no need to use bit operations. Furthermore, current condition check is broken in that it does writeback every pages regardless of huge/idle. 3. clean up idle_store No need to use goto. [minchan@kernel.org: missed spin_lock_init] Link: http://lkml.kernel.org/r/20190103001601.GA255139@google.com Link: http://lkml.kernel.org/r/20181224033529.19450-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Suggested-by: John Dias <joaodias@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: John Dias <joaodias@google.com> Cc: Srinivas Paladugu <srnvs@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08drm/amdgpu: Don't fail resume process if resuming atomic state failsLyude Paul1-3/+2
This is an ugly one unfortunately. Currently, all DRM drivers supporting atomic modesetting will save the state that userspace had set before suspending, then attempt to restore that state on resume. This probably worked very well at one point, like many other things, until DP MST came into the picture. While it's easy to restore state on normal display connectors that were disconnected during suspend regardless of their state post-resume, this can't really be done with MST because of the fact that setting up a downstream sink requires performing sideband transactions between the source and the MST hub, sending out the ACT packets, etc. Because of this, there isn't really a guarantee that we can restore the atomic state we had before suspend once we've resumed. This sucks pretty bad, but so far I haven't run into any compositors that this actually causes serious issues with. Most compositors will notice the hotplug we send afterwards, and then reprobe state. Since nouveau and i915 also don't fail the suspend/resume process due to failing to restore the atomic state, let's make amdgpu match this behavior. Better to resume the GPU properly, then to stop the process half way because of a potentially unavoidable atomic commit failure. Eventually, we'll have a real fix for this problem on the DRM level. But we've got some more important low-hanging fruit to deal with first. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com
2019-01-08drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()Lyude Paul1-9/+23
drm_dp_mst_topology_mgr_resume() returns whether or not it managed to find the topology in question after a suspend resume cycle, and the driver is supposed to check this value and disable MST accordingly if it's gone-in addition to sending a hotplug in order to notify userspace that something changed during suspend. Currently, amdgpu just makes the mistake of ignoring the return code from drm_dp_mst_topology_mgr_resume() which means that if a topology was removed in suspend, amdgpu never notices and assumes it's still connected which leads to all sorts of problems. So, fix this by actually checking the rc from drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the function while we're at it to fix the over-indenting. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com
2019-01-08drm/amdgpu: validate user GEM object sizeYu Zhao1-0/+8
When creating frame buffer, userspace may request to attach to a previously allocated GEM object that is smaller than what GPU requires. Validation must be done to prevent out-of-bound DMA, otherwise it could be exploited to reveal sensitive data. This fix is not done in a common code path because individual driver might have different requirement. Cc: stable@vger.kernel.org # v4.2+ Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amdgpu: validate user pitch alignmentYu Zhao1-0/+10
Userspace may request pitch alignment that is not supported by GPU. Some requests 32, but GPU ignores it and uses default 64 when cpp is 4. If GEM object is allocated based on the smaller alignment, GPU DMA will go out of bound. Cc: stable@vger.kernel.org # v4.2+ Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: drop the unnecessary uclk hard min settingEvan Quan1-7/+0
Since soft min setting is enough. Hard min setting is redundant. Reported-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: avoid possible buffer overflowEvan Quan1-0/+14
Make sure the clock level enforced is within the allowed ranges. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: create pp_od_clk_voltage device file under OD supportEvan Quan1-8/+14
Since pp_od_clk_voltage device file is for OD related sysfs operations. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08drm/amd/powerplay: update OD support flag for SKU with no OD capabilitiesEvan Quan1-0/+3
For those ASICs with no overdrive capabilities, the OD support flag will be reset. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-08vfio/type1: Fix unmap overflow off-by-oneAlex Williamson1-1/+1
The below referenced commit adds a test for integer overflow, but in doing so prevents the unmap ioctl from ever including the last page of the address space. Subtract one to compare to the last address of the unmap to avoid the overflow and wrap-around. Fixes: 71a7d3d78e3c ("vfio/type1: silence integer overflow warning") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291 Cc: stable@vger.kernel.org # v4.15+ Reported-by: Pei Zhang <pezhang@redhat.com> Debugged-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-09irqchip/csky: fixup handle_irq_perbit break irqGuo Ren1-35/+42
The handle_irq_perbit function loop every bit in hwirq local variable. handle_irq_perbit(hwirq) { for_everyt_bit_in(hwirq) { handle_domain_irq() ->irq_exit() ->invoke_softirq() ->__do_softirq() ->local_irq_enable() // Here will cause new interrupt. } } When new interrupt coming at local_irq_enable, it will finish another interrupt handler and pull down the interrupt source. But hwirq is the local variable for handle_irq_perbit(), it can't get new interrupt controller pending reg status. So we need update hwirq with pending reg in every loop. Also change write_relax to writel could prevent stw from fast retire. When local_irq is enabled, intc regs is really set-in. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Lu Baoquan <lu.baoquan@intellif.com>
2019-01-08vfio/pci: set TRACE_INCLUDE_PATH to fix the build errorMasahiro Yamada1-1/+1
drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree building. CC drivers/vfio/pci/vfio_pci_nvlink2.o In file included from drivers/vfio/pci/trace.h:102, from drivers/vfio/pci/vfio_pci_nvlink2.c:29: ./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) ^ compilation terminated. make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1 To fix the build error, let's tell include/trace/define_trace.h the location of drivers/vfio/pci/trace.h Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-08serial: lantiq: Do not swap register read/writesHauke Mehrtens1-17/+19
The ltq_r32() and ltq_w32() macros use the __raw_readl() and __raw_writel() functions which do not swap the value to little endian. On the big endian vrx200 SoC the UART is operated in big endian IO mode, the readl() and write() functions convert the value to little endian first and then the driver does not work any more on this SoC. Currently the vrx200 SoC selects the CONFIG_SWAP_IO_SPACE option, without this option the serial driver would work, but PCI devices do not work any more. This patch makes the driver use the __raw_readl() and __raw_writel() functions which do not swap the endianness. On big endian system it is assumed that the device should be access in big endian IO mode and on a little endian system it would be access in little endian mode. Fixes: 89b8bd2082bb ("serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08PCI: amlogic: Fix build failure due to missing gpio headerCorentin Labbe1-0/+1
Building the driver when GPIOLIB=n is not selected is causing the following compilation failure: drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset': drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(mp->reset_gpio, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe': drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~ devm_gpio_free drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW Add the missing linux/gpio/consumer.h header to fix it. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent() on headersLuis Chamberlain3-3/+3
The last few stragglers coccinelle doesn't pick up are on driver specific header files. Phase those out as well as dma_alloc_coherent() zeroes out the memory as well now too. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain167-937/+902
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08mtd: rawnand: qcom: fix memory corruption that causes panicChristian Lamparter1-10/+10
This patch fixes a memory corruption that occurred in the qcom-nandc driver since it was converted to nand_scan(). On boot, an affected device will panic from a NPE at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 0 | pgd = (ptrval) | [00000000] *pgd=00000000 | Internal error: Oops: 80000005 [#1] SMP ARM | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0 | Hardware name: Generic DT based system | PC is at (null) | LR is at nand_block_isbad+0x90/0xa4 | pc : [<00000000>] lr : [<c0592240>] psr: 80000013 | sp : cf839d40 ip : 00000000 fp : cfae9e20 | r10: cf815810 r9 : 00000000 r8 : 00000000 | r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : cf815810 | r3 : 00000000 r2 : cfae9810 r1 : ffffffff r0 : cf815810 | Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | [<c0592240>] (nand_block_isbad) from [<c0580a94>] | [<c0580a94>] (allocate_partition) from [<c05811e4>] | [<c05811e4>] (add_mtd_partitions) from [<c0581164>] | [<c0581164>] (parse_mtd_partitions) from [<c057def4>] | [<c057def4>] (mtd_device_parse_register) from [<c059d274>] | [<c059d274>] (qcom_nandc_probe) from [<c0567f00>] The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_block_bad() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch restores the old behavior by reallocating the shared bam transaction alloc_bam_transaction() after the chip was identified, but before mtd_device_parse_register() (which is an alias for mtd_device_register() - see panic) gets called. This fixes the corruption and the driver is working again. Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-08cpufreq: check if policy is inactive early in __cpufreq_get()Sudeep Holla1-8/+4
cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-07ACPI/IORT: Fix build when CONFIG_IOMMU_API=nQian Cai1-1/+1
Commit 8097e53eaba2 ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec") changed by mistake the iort_fwspec_iommu_ops() stub definition (compiled in when CONFIG_IOMMU_API=n), that caused the following compilation failure: drivers/acpi/arm64/iort.c:880:1: error: expected identifier or '(' before '{' token { return NULL; } ^ drivers/acpi/arm64/iort.c:879:39: warning: 'iort_fwspec_iommu_ops' used but never defined static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev); ^~~~~~~~~~~~~~~~~~~~~ Fix it. Fixes: 8097e53eaba2 ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec") Signed-off-by: Qian Cai <cai@lca.pw> [lorenzo.pieralisi@arm.com: updated tags and log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-09 01:14:23 +0000