summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-05-25nvme: fixup memory leak in nvme_init_identify()Hannes Reinecke1-1/+1
If nvme_get_effects_log() failed the 'id' buffer from the previous nvme_identify_ctrl() call will never be freed. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme: fix KASAN warning when parsing host nqnHannes Reinecke1-1/+1
The host nqn actually is smaller than the space reserved for it, so we should be using strlcpy to keep KASAN happy. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet-loop: use nr_phys_segments when map rq to sglChaitanya Kulkarni1-1/+1
Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check if a command contains data to me mapped. This fixes the case where a struct requests contains LBAs, but no data will actually be send, e.g. the pending Write Zeroes support. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet-fc: increase LS buffer count per fc portJames Smart1-1/+1
Todays limit on concurrent LS's is very small - 4 buffers. With large subsystem counts or large numbers of initiators connecting, the limit may be exceeded. Raise the LS buffer count to 256. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet: add simple file backed ns supportChaitanya Kulkarni6-52/+413
This patch adds simple file backed namespace support for NVMeOF target. The new file io-cmd-file.c is responsible for handling the code for I/O commands when ns is file backed. Also, we introduce mempools based slow path using sync I/Os for file backed ns to ensure forward progress under reclaim. The old block device based implementation is moved to io-cmd-bdev.c and use a "nvmet_bdev_" symbol prefix. The enable/disable calls are also move into the respective files. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> [hch: updated changelog, fixed double req->ns lookup in bdev case] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet: remove duplicate NULL initialization for req->nsChaitanya Kulkarni5-12/+1
Remove the duplicate NULL initialization for req->ns. req->ns is always initialized to NULL in nvmet_req_init(), so there is no need to reset it later on failures unless we have previously assigned a value to it. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet: make a few error messages more genericChaitanya Kulkarni1-2/+2
"nvmet_check_ctrl_status()" is called from admin-cmd.c along with io-cmd.c, make the error message more generic. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-fabrics: allow duplicate connections to the discovery controllerHannes Reinecke2-1/+3
The whole point of the discovery controller is that it can accept multiple connections. Additionally the cmic field is not even defined for the discovery controller identify page. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-fabrics: centralize discovery controller defaultsHannes Reinecke1-4/+4
When connecting to the discovery controller we have certain defaults to observe, so centralize them to avoid inconsistencies due to argument ordering. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-fabrics: remove unnecessary controller subnqn validationJames Smart1-10/+0
After creating the nvme controller, nvmf_create_ctrl() validates the newly created subsysnqn vs the one specified by the options. In general, this is an unnecessary check as the Connect message should implicitly ensure this value matches. With the change to the FC transport to do an asynchronous connect for the first association create, the transport will return to nvmf_create_ctrl() before that first association has been established, thus the subnqn will not yet be set. Remove the unnecessary validation. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-fc: remove setting DNR on exception conditionsJames Smart1-10/+0
Current code will set DNR if the controller is deleting or there is an error during controller init. None of this is necessary. Remove the code that sets DNR Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-rdma: stop admin queue before freeing itJianchao Wang1-4/+6
For any failure after nvme_rdma_start_queue in nvme_rdma_configure_admin_queue, the admin queue will be freed with the NVME_RDMA_Q_LIVE flag still set. Once nvme_rdma_stop_queue is invoked, that will cause a use-after-free. BUG: KASAN: use-after-free in rdma_disconnect+0x1f/0xe0 [rdma_cm] To fix it, call nvme_rdma_stop_queue for all the failed cases after nvme_rdma_start_queue. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-pci: Fix AER reset handlingKeith Busch1-9/+5
The nvme timeout handling doesn't do anything if the pci channel is offline, which is the case when recovering from PCI error event, so it was a bad idea to sync the controller reset in this state. This patch flushes the reset work in the error_resume callback instead when the channel is back to online. This keeps AER handling serialized and can recover from timeouts. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199757 Fixes: cc1d5e749a2e ("nvme/pci: Sync controller reset for AER slot_reset") Reported-by: Alex Gagniuc <mr.nuke.me@gmail.com> Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvme-pci: set nvmeq->cq_vector after alloc cq/sqJianchao Wang1-9/+16
Set cq_vector after alloc cq/sq, otherwise nvme_suspend_queue will invoke free_irq for it and cause a 'Trying to free already-free IRQ xxx' warning if the create CQ/SQ command times out. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Keith Busch <keith.busch@intel.com> [hch: fixed to pass a s16 and clean up the comment] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-23nvme: host: core: fix precedence of ternary operatorIvan Bornyakov1-2/+2
Ternary operator have lower precedence then bitwise or, so 'cdw10' was calculated wrong. Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-05-23nvme: fix lockdep warning in nvme_mpath_clear_current_pathJohannes Thumshirn1-1/+2
When running blktest's nvme/005 with a lockdep enabled kernel the test case fails due to the following lockdep splat in dmesg: ============================= WARNING: suspicious RCU usage 4.17.0-rc5 #881 Not tainted ----------------------------- drivers/nvme/host/nvme.h:457 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by kworker/u32:5/1102: #0: (ptrval) ((wq_completion)"nvme-wq"){+.+.}, at: process_one_work+0x152/0x5c0 #1: (ptrval) ((work_completion)(&ctrl->scan_work)){+.+.}, at: process_one_work+0x152/0x5c0 #2: (ptrval) (&subsys->lock#2){+.+.}, at: nvme_ns_remove+0x43/0x1c0 [nvme_core] The only caller of nvme_mpath_clear_current_path() is nvme_ns_remove() which holds the subsys lock so it's likely a false positive, but when using rcu_access_pointer(), we're telling rcu and lockdep that we're only after the pointer falue. Fixes: 32acab3181c7 ("nvme: implement multipath access to nvme subsystems") Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-05-22block/ndb: add WQ_UNBOUND to the knbd-recv workqueueDan Melnic1-1/+2
Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound to a single CPU that is selected at device creation time. Signed-off-by: Dan Melnic <dmm@fb.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-21nvme-pci: fix race between poll and IRQ completionsJens Axboe1-4/+11
If polling completions are racing with the IRQ triggered by a completion, the IRQ handler will find no work and return IRQ_NONE. This can trigger complaints about spurious interrupts: [ 560.169153] irq 630: nobody cared (try booting with the "irqpoll" option) [ 560.175988] CPU: 40 PID: 0 Comm: swapper/40 Not tainted 4.17.0-rc2+ #65 [ 560.175990] Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.00.01.0010.010920180151 01/09/2018 [ 560.175991] Call Trace: [ 560.175994] <IRQ> [ 560.176005] dump_stack+0x5c/0x7b [ 560.176010] __report_bad_irq+0x30/0xc0 [ 560.176013] note_interrupt+0x235/0x280 [ 560.176020] handle_irq_event_percpu+0x51/0x70 [ 560.176023] handle_irq_event+0x27/0x50 [ 560.176026] handle_edge_irq+0x6d/0x180 [ 560.176031] handle_irq+0xa5/0x110 [ 560.176036] do_IRQ+0x41/0xc0 [ 560.176042] common_interrupt+0xf/0xf [ 560.176043] </IRQ> [ 560.176050] RIP: 0010:cpuidle_enter_state+0x9b/0x2b0 [ 560.176052] RSP: 0018:ffffa0ed4659fe98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 560.176055] RAX: ffff9527beb20a80 RBX: 000000826caee491 RCX: 000000000000001f [ 560.176056] RDX: 000000826caee491 RSI: 00000000335206ee RDI: 0000000000000000 [ 560.176057] RBP: 0000000000000001 R08: 00000000ffffffff R09: 0000000000000008 [ 560.176059] R10: ffffa0ed4659fe78 R11: 0000000000000001 R12: ffff9527beb29358 [ 560.176060] R13: ffffffffa235d4b8 R14: 0000000000000000 R15: 000000826caed593 [ 560.176065] ? cpuidle_enter_state+0x8b/0x2b0 [ 560.176071] do_idle+0x1f4/0x260 [ 560.176075] cpu_startup_entry+0x6f/0x80 [ 560.176080] start_secondary+0x184/0x1d0 [ 560.176085] secondary_startup_64+0xa5/0xb0 [ 560.176088] handlers: [ 560.178387] [<00000000efb612be>] nvme_irq [nvme] [ 560.183019] Disabling IRQ #630 A previous commit removed ->cqe_seen that was handling this case, but we need to handle this a bit differently due to completions now running outside the queue lock. Return IRQ_HANDLED from the IRQ handler, if the completion ring head was moved since we last saw it. Fixes: 5cb525c8315f ("nvme-pci: handle completions outside of the queue lock") Reported-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Tested-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-21Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-4.18/blockJens Axboe5-94/+133
Pull NVMe changes from Keith: "This is just the first nvme pull request for 4.18. There are several fabrics and target patches that I missed, so there will be more to come." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-pci: drop IRQ disabling on submission queue lock nvme-pci: split the nvme queue lock into submission and completion locks nvme-pci: handle completions outside of the queue lock nvme-pci: move ->cq_vector == -1 check outside of ->q_lock nvme-pci: remove cq check after submission nvme-pci: simplify nvme_cqe_valid nvme: mark the result argument to nvme_complete_async_event volatile nvme/pci: Sync controller reset for AER slot_reset nvme/pci: Hold controller reference during async probe nvme: only reconfigure discard if necessary nvme/pci: Use async_schedule for initial reset work nvme: lightnvm: add granby support NVMe: Add Quirk Delay before CHK RDY for Seagate Nytro Flash Storage nvme: change order of qid and cmdid in completion trace nvme: fc: provide a descriptive error
2018-05-18nvme-pci: drop IRQ disabling on submission queue lockJens Axboe1-4/+4
Since we aren't sharing the lock for completions now, we don't have to make it IRQ safe. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-18nvme-pci: split the nvme queue lock into submission and completion locksJens Axboe1-21/+23
This is now feasible. We protect the submission queue ring with ->sq_lock, and the completion side with ->cq_lock. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-18nvme-pci: handle completions outside of the queue lockJens Axboe1-42/+45
Split the completion of events into a two part process: 1) Reap the events inside the queue lock 2) Complete the events outside the queue lock Since we never wrap the queue, we can access it locklessly after we've updated the completion queue head. This patch started off with batching events on the stack, but with this trick we don't have to. Keith Busch <keith.busch@intel.com> came up with that idea. Note that this kills the ->cqe_seen as well. I haven't been able to trigger any ill effects of this. If we do race with polling every so often, it should be rare enough NOT to trigger any issues. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <keith.busch@intel.com> [hch: refactored, restored poll early exit optimization] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-18nvme-pci: move ->cq_vector == -1 check outside of ->q_lockJens Axboe1-5/+13
We only clear it dynamically in nvme_suspend_queue(). When we do, ensure to do a full flush so that any nvme_queue_rq() invocation will see it. Ideally we'd kill this check completely, but we're using it to flush requests on a dying queue. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-18nvme-pci: remove cq check after submissionJens Axboe1-2/+0
We always check the completion queue after submitting, but in my testing this isn't a win even on DRAM/xpoint devices. In some cases it's actually worse. Kill it. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-18nvme-pci: simplify nvme_cqe_validChristoph Hellwig1-6/+6
We always look at the current CQ head and phase, so don't pass these as separate arguments, and rename the function to nvme_cqe_pending. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-18nvme: mark the result argument to nvme_complete_async_event volatileChristoph Hellwig2-2/+2
We'll need that in the PCIe driver soon as we'll read it straight off the CQ. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16nbd: call nbd_bdev_reset instead of bd_set_size on disconnectJosef Bacik1-1/+1
We need to make sure we don't just set the size of the bdev to 0 while it's being used by a file system. We have the appropriate check in nbd_bdev_reset, simply use that helper instead. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16nbd: fix how we set bd_invalidatedJosef Bacik1-4/+3
bd_invalidated is kind of a pain wrt partitions as it really only triggers the partition rescan if it is set after bd_ops->open() runs, so setting it when we reset the device isn't useful. We also sporadically would still have partitions left over in some disconnect cases, so fix this by always setting bd_invalidated on open if there's no configuration or if we've had a disconnect action happen, that way the partition table gets invalidated and rescanned properly. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16nbd: clear_sock on netlink disconnectJosef Bacik1-0/+1
This is what the ioctl based nbd disconnect does as well. Without this the device will just sit there and wait for the connection to go away (or IO to occur) before the device gets torn down. Instead clear everything up on our end so the configuration goes away as quickly as possible. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16nbd: use bd_set_size when updating disk sizeJosef Bacik1-1/+9
When we stopped relying on the bdev everywhere I broke updating the block device size on the fly, which ceph relies on. We can't just do set_capacity, we also have to do bd_set_size so things like parted will notice the device size change. Fixes: 29eaadc ("nbd: stop using the bdev everywhere") cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16nbd: update size when connectedJosef Bacik1-0/+2
I messed up changing the size of an NBD device while it was connected by not actually updating the device or doing the uevent. Fix this by updating everything if we're connected and we change the size. cc: stable@vger.kernel.org Fixes: 639812a ("nbd: don't set the device size until we're connected") Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16nbd: fix nbd device deletionJosef Bacik1-1/+4
This fixes a use after free bug, we shouldn't be doing disk->queue right after we do del_gendisk(disk). Save the queue and do the cleanup after the del_gendisk. Fixes: c6a4759ea0c9 ("nbd: add device refcounting") cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-15Remove jsflash driverJens Axboe3-668/+0
Nobody is using it anymore, and it's been abandoned. Since David is fine with removing it, kill it. Suggested-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: Split out bio_list_copy_data()Kent Overstreet1-1/+1
Found a bug (with ASAN) where we were passing a bio to bio_copy_data() with bi_next not NULL, when it should have been - a driver had left bi_next set to something after calling bio_endio(). Since the normal case is only copying single bios, split out bio_list_copy_data() to avoid more bugs like this in the future. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: Use bioset_init() for fs_bio_setKent Overstreet1-1/+1
Minor optimization - remove a pointer indirection when using fs_bio_set. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: consistently use GFP_NOIO instead of __GFP_NORECLAIMChristoph Hellwig5-5/+6
Same numerical value (for now at least), but a much better documentation of intent. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: pass an explicit gfp_t to get_requestChristoph Hellwig1-4/+0
blk_old_get_request already has it at hand, and in blk_queue_bio, which is the fast path, it is constant. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: sanitize blk_get_request calling conventionsChristoph Hellwig24-35/+32
Switch everyone to blk_get_request_flags, and then rename blk_get_request_flags to blk_get_request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14scsi/osd: remove the gfp argument to osd_start_requestChristoph Hellwig1-13/+11
Always GFP_KERNEL, and keeping it would cause serious complications for the next change. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14memstick: remove unused variablesChristoph Hellwig2-2/+0
Fixes: 7c2d748e8476 ("memstick: don't call blk_queue_bounce_limit") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11ps3disk: handle highmem pagesChristoph Hellwig1-2/+0
The ps3disk driver already kmaps all pages when copying from/to the internal bounce buffer, so it can accept highmem pages just fine. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11jsflash: handle highmem pagesChristoph Hellwig1-2/+4
Just kmap the bio single page payload before processing it. (and yes, now highmem on sparc32 anyway, but kmap_(un)map atomic are nops, so this gives the right example) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11aoe: handle highmem pagesChristoph Hellwig2-2/+2
Use kmap_atomic when copying out of a bio_vec. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11mtd_blkdevs: handle highmem pagesChristoph Hellwig1-6/+14
Just kmap the single payload page before passing it on to the FTL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11memstick: don't call blk_queue_bounce_limitChristoph Hellwig2-10/+0
All in-tree host drivers set up a proper dma mask and use the dma-mapping helpers. This means they will be able to deal with any address that we are throwing at them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11DAC960: don't use block layer bounce buffersChristoph Hellwig2-8/+2
DAC960 just sets the block bounce limit to the dma mask, which means that the iommu or swiotlb already take care of the bounce buffering, and the block bouncing can be removed. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11mtip32xx: don't use block layer bounce buffersChristoph Hellwig1-1/+0
mtip32xx just sets the block bounce limit to the dma mask, which means that the iommu or swiotlb already take care of the bounce buffering, and the block bouncing can be removed. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11nvme/pci: Sync controller reset for AER slot_resetKeith Busch1-2/+9
AER handling expects a successful return from slot_reset means the driver made the device functional again. The nvme driver had been using an asynchronous reset to recover the device, so the device may still be initializing after control is returned to the AER handler. This creates problems for subsequent event handling, causing the initializion to fail. This patch fixes that by syncing the controller reset before returning to the AER driver, and reporting the true state of the reset. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199657 Reported-by: Alex Gagniuc <mr.nuke.me@gmail.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-05-10mtip32xx: Fix an error handling path in 'mtip_pci_probe()'Christophe JAILLET1-1/+1
Branch to the right label in the error handling path in order to keep it logical. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09brd: Mark as non-rotationalSeongJae Park1-0/+4
This commit sets QUEUE_FLAG_NONROT and clears up QUEUE_FLAG_ADD_RANDOM to mark the ramdisks as non-rotational device. Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 16:35:07 +0000