summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-09-20gpu/drm/exynos: Convert drm_atomic_helper_suspend/resume()Souptick Joarder4-52/+2
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). exynos_drm_fbdev_suspend/resume can be removed as drm_mode_config_helper_suspend/resume has implement the same in generic way. Remove suspend_state from exynos_drm_private struct as it is no more useful. Signed-off-by: Ajit Negi <ajitn.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: enable out_bridge in exynos_dsi_enableMaciej Purski1-15/+23
As the out bridge will not be enabled directly by the framework, it should be enabled by DSI. exynos_dsi_enable() should handle a case, when there is an out_bridge connected as a DSI peripheral. Changed in v5: - fixed error path in exynos_dsi_enable Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: move connector creation to attach callbackMaciej Purski1-21/+32
The current implementation assumes that the only possible peripheral device for DSIM is a panel. Using an output bridge child device should also be possible. If an output bridge is available, don't create a new connector. Instead, call drm_bridge_attach() and set encoder's bridge to NULL in order to avoid an out bridge from being visible by the framework, as the DSI bus needs control on enabling its child output bridge. Such sequence is required by Toshiba TC358764 bridge, which is a DSI peripheral bridge device. changed in v5: - detach bridge in mipi_dsi detach callback Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Manually merged due to merge conflict. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: rename bridge_node to in_bridge_nodeMaciej Purski1-8/+8
Driver uses bridge_node to refer to bridge on input side of DSI. Since we want to add support for bridges on output side lets add "in" prefix to avoid confusion with out bridges. Changes in v5: - replace mic_ prefix with in_ Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsuung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20Merge tag 'du-next-20180914' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie32-245/+247
R-Car DU changes for v4.20 The pull request mostly contains updates to the R-Car DU driver, notably support for interlaced modes on Gen3 hardware, support for the LVDS output on R8A77980, and a set of miscellaneous bug fixes. There are also two SPDX conversion patches for the drm shmobile and panel-lvds drivers, as well as an update to MAINTAINERS to add Kieran Bingham as a co-maintainer for the DU driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/3273568.LdoAI77IYW@avalon
2018-09-20Merge tag 'drm-misc-next-2018-09-19' of ↵Dave Airlie36-124/+171
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - None Cross-subsystem Changes: - None Core Changes: - Allow drivers to disable features with per-device granularity (Ville) - Use EOPNOTSUPP when iface/feature is unsupported instead of EINVAL/errno soup (Chris) - Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn) - add quirk for LG LP140WF6-SPM1 eDP panel (Shawn) Driver Changes: - i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville) - sun4i: add support for R40 HDMI PHY (Icenowy) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
2018-09-19drm: add LG eDP panel to quirk databaseLee, Shawn C1-0/+2
The N value was computed by kernel driver that based on synchronous clock mode. But only specific N value (0x8000) would be acceptable for LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode. With the other N value, Tcon will enter BITS mode and display black screen. Add this panel into quirk database and give particular N value when calculate M/N divider. v2: no update v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com
2018-09-19drm: Change limited M/N quirk to constant N quirk.Lee, Shawn C5-24/+22
Some DP dongles in particular seem to be fussy about too large link M/N values. Set specific value for N divider can resolve this issue per dongle vendor's comment. So configure N as constant value (0x8000) to instead of reduce M/N formula when specific DP dongle connected. v2: add more comments for issue description and fix typo. v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
2018-09-19drm: Add support for device_id based detection.Lee, Shawn C1-1/+14
DP quirk list just compare sink or branch device's OUI so far. That means particular vendor's products will be applied specific change. This change would confirm device_id the same or not. Then driver can implement some changes for branch/sink device that really need additional WA. v2: use sizeof instead of hard coded '6' v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-2-git-send-email-shawn.c.lee@intel.com
2018-09-19drm/virtio: add dma sync for dma mapped virtio gpu framebuffer pagesJiandi An3-7/+26
With virtio gpu ttm-pages being dma mapped, dma sync is needed when swiotlb is used as bounce buffers, before TRANSFER_TO_HOST_2D/3D commands are sent. Signed-off-by: Jiandi An <jiandi.an@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180919070931.91168-1-jiandi.an@amd.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-19drm/sun4i: add support for R40 HDMI PHYIcenowy Zheng1-0/+12
The R40 SoC has a HDMI PHY that is possible to mux two video PLLs. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-4-icenowy@aosc.io
2018-09-15drm: rcar-du: Remove packed VYUY supportKieran Bingham1-2/+0
The Gen3 VSP used by the DU for display does not support the packed VYUY pixel format. Gen2 VSP hardware is able to process this format, but DU + VSP operation isn't enabled on Gen2, and VYUY isn't a strategic format, so it can be ignored. Remove the format from the capabilities of the DU driver. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3Laurent Pinchart1-12/+23
The framebuffer pitch and alignment constraints reflect the limitations of the Gen2 DU hardware. On Gen3, the DU has no memory interface and thus doesn't impose any constraint. The limitations come instead from the VSP that has a limit of 65535 bytes for the pitch and no alignment constraint. Update the checks accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Add support for missing pixel formatsKoji Matsuoka1-0/+32
This patch supports pixel format of RGB332, ARGB4444, XRGB4444, BGR888, RGB888, BGRA8888, BGRX8888 and YVYU. VYUY pixel format is not supported by H/W specification. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Reordered formats with RGB first] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Update Gen3 output limitationsKieran Bingham1-2/+12
The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The limits on the RPF and WPF in this pipeline are 8190x8190. Update the supported maximum sizes accordingly. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: lvds: add R8A77980 supportSergei Shtylyov1-0/+1
Add support for the R-Car V3H (R8A77980) SoC to the LVDS encoder driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Write ESCR and OTAR as CRTC registersJacopo Mondi2-7/+6
The ESCR and OTAR registers exist in each DU channel, but at different offsets for odd and even channels. This led to usage of the group register access API to write them, with offsets macros named ESCR/OTAR and ESCR2/OTAR2 for the first and second ESCR/OTAR register in the group respectively. The names are confusing as it suggests that the ESCR/OTAR registers for DU0 and DU2 are taken into account, especially with writes performed to the group register access API. Rename the offsets to ESCR/OTAR02 and ESCR/OTAR13, and use the CRTC register access API to clarify the code. The offsets values are updated accordingly. Cosmetic patch, no functional changes intended. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Squashed ESCR and OTAR changes in a single commit] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Rename and document dpll_ch fieldJacopo Mondi3-5/+6
Document and re-name the 'dpll_ch' field to a more precise 'dpll_mask' for consistency with the 'channels_mask' field defined in 'struct rcar_du_device_info'. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Improve non-DPLL clock selectionJacopo Mondi1-31/+54
DU channels not equipped with a DPLL use an SoC internal (provided by the CPG) or external clock source combined with a DU internal divider to generate the desired output dot clock frequency. The current clock selection procedure does not fully exploit the ability of external clock sources to generate the exact dot clock frequency by themselves, but relies instead on tuning the internal DU clock divider only, resulting in a less precise clock generation process. When possible, and desirable, ask the external clock source for the exact output dot clock frequency, and select the clock source that produces the frequency closest to the desired output dot clock. This patch specifically targets platforms (like Salvator-X[S] and ULCBs) where the DU's input dotclock.in is generated by the versaclock VC5 clock source, which is capable of generating the exact rate the DU needs as pixel clock output. This patch fixes higher resolution modes which requires an high pixel clock output currently not working on non-HDMI DU channel (such as 1920x1080@60Hz on the VGA output). Fixes: 1b30dbde8596 ("drm: rcar-du: Add support for external pixel clock") Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> [Factor out code to a helper function] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-15drm: rcar-du: Rework clock configuration based on hardware limitsLaurent Pinchart1-61/+73
The DU channels that have a display PLL (DPLL) can only use external clock sources, and don't have an internal clock divider (with the exception of H3 ES1.x where the post-divider is present and needs to be used as a workaround for a DPLL silicon issue). Rework the clock configuration to take this into account, avoiding selection of non-existing clock sources or usage of a missing post-divider. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-14drm: Differentiate the lack of an interface from invalid parameterChris Wilson23-80/+82
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
2018-09-14drm: rcar-du: Add interlaced feature flagKieran Bingham3-11/+36
Upcoming implementations of the R-Car DU have removed support for interlaced display pipelines. Provide a means to determine this based on the feature flags of the hardware configuration structs. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-14drm: rcar-du: Refactor Feature and Quirk definitionsKieran Bingham1-4/+4
These flags are represented by bit fields. To make this clear, utilise the BIT() macro. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-14drm: rcar-du: Support interlaced video output through vsp1Kieran Bingham2-0/+2
Use the newly exposed VSP1 interface to enable interlaced frame support through the VSP1 LIF pipelines. The DSMR register is updated to set the ODEV flag on interlaced pipelines, thus defining an interlaced stream as having the ODD field located in the second half (BOTTOM) of the frame buffer. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-09-14drm: rcar-du: Convert to SPDX identifiersKuninori Morimoto18-83/+18
Kconfig doesn't have license line, thus, it is GPL-2.0 as default. rcar_du_regs.h, rcar_lvds_regs.h are GPL-2.0, and all other files are GPL-2.0+ as original license. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-09-14drm: panel-lvds: convert to SPDX identifiersKuninori Morimoto1-5/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-09-14drm: shmobile: convert to SPDX identifiersKuninori Morimoto12-55/+12
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-09-14udmabuf: fix error code in map_udmabuf()Dan Carpenter1-1/+3
We accidentally forgot to set "ret" on this error path so it means we return NULL instead of an error pointer. The caller checks for NULL and changes it to an error pointer so it doesn't cause an issue at run time. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180914065615.GA12043@mwanda Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-14Merge tag 'drm-misc-next-2018-09-13' of ↵Dave Airlie61-2162/+2106
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - Add host endian variants for the most common formats (Gerd) - Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd) - clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel) Cross-subsystem Changes: Core Changes: - fix drm_mode_addfb() on big endian machines (Gerd) - add timeline point to syncobj find+replace (Chunming) - more drmP.h removal effort (Daniel) - split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel) Driver Changes: - bochs: Convert open-coded portions to use helpers (Peter) - vkms: Add cursor support (Haneen) - udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd) - qxl: Convert to use fbdev helper (Peter) Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
2018-09-13drm/amdgpu: Use per-device driver_features to disable atomicVille Syrjälä1-8/+4
Disable atomic on a per-device basis instead of for all devices. Made possible by the new device.driver_features thing. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Suggested-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180913163147.27900-2-ville.syrjala@linux.intel.com Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-13drm/i915: Clear DRIVER_ATOMIC on a per-device basisVille Syrjälä1-4/+4
Currently we're clearing DRIVER_ATOMIC in driver.driver_features for older platforms. This will not work correctly should we ever have a system with and old and new GPU in it. While that is not possible currently let's make the code more correct and use the per-device driver_features instead. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-09-13drm: Introduce per-device driver_featuresVille Syrjälä1-0/+3
We wish to control certain driver_features flags on a per-device basis while still sharing a single drm_driver instance across all the devices. To that end introduce device.driver_features. By default it will be set to ~0 to not impose any limits beyond driver.driver_features. Drivers can then clear specific flags in the per-device bitmask to limit the capabilities of the device. An alternative approach would be to copy the driver_features from the driver into the device in drm_dev_init(), however that would require verifying that no driver is currently changing driver.driver_features after drm_dev_init(). Hence the ~0 apporach was easier. Ideally we'd also make drm_driver const but there is plenty of code left that wants to mutate it (eg. various vfunc assignments). We'll need to fix all that up before we can make it const. And while at it fix up the type of the feature flag passed to drm_core_check_feature(). v2: Streamline the && vs. & (Chris) s/int/u32/ in drm_core_check_feature() args Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2018-09-13drm: bridge: document bridge attach/detach imbalancePeter Rosin1-0/+4
Since commit 4a878c03d562 ("drm: bridge: Detach bridge from encoder at encoder cleanup time"), it is generally no longer correct to detach bridges from encoders manually. Document that. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-3-peda@axentia.se
2018-09-13drm/bridge: analogix_dp: Downgrade "Link Training" messages to dev_dbgMarc Zyngier1-2/+2
The Analogix DP bridge driver is pretty verbose, and outputs things like [ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success [ 619.429233] rockchip-dp ff970000.edp: Link Training success! each time the display gets unblanked. While it is good to know that the device is behaving correctly, users already know that because they can see some video output. Let's keep these messages for cases where we need to actually debug the driver (we have dynamic debug to enable them at runtime if need be), and let's keep the kernel quiet otherwise. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180805172857.2517-1-marc.zyngier@arm.com
2018-09-12drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=mMaxime Ripard1-3/+11
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in a link error, as we try to access a symbol from the sun8i_tcon_top.ko module: ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! This solves the problem by adding a silent symbol for the tcon_top module, building it as a separate module in exactly the cases that we need it, but in a way that it is reachable by the other modules. Fixes: cf77d79b4e29 ("drm/sun4i: tcon: Add another way for matching mixers with tcon") Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Matt Hart <matthew.hart@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
2018-09-12qxl: refactor to use drm_fb_helper_fbdev_setupPeter Wu4-276/+60
Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-12udmabuf: use sizeof(variable) instead of sizeof(type)Gerd Hoffmann1-3/+3
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-13-kraxel@redhat.com
2018-09-12udmabuf: drop WARN_ON() check.Gerd Hoffmann1-3/+0
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-12-kraxel@redhat.com
2018-09-12udmabuf: use ENOTTY for invalid ioctlsGerd Hoffmann1-1/+1
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-11-kraxel@redhat.com
2018-09-12udmabuf: use EBADFD in case we didn't got a memfdGerd Hoffmann1-2/+5
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-10-kraxel@redhat.com
2018-09-12udmabuf: improve udmabuf_create error handlingGerd Hoffmann1-13/+12
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-9-kraxel@redhat.com
2018-09-12udmabuf: rework limitsGerd Hoffmann1-2/+8
Create variable for the list length limit. Serves as documentation, also allows to make it a module parameter if needed. Also add a total size limit. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-8-kraxel@redhat.com
2018-09-12udmabuf: add MEMFD_CREATE dependencyGerd Hoffmann1-0/+1
udmabuf builds without it, but if userspace can not create memfd handles in the first place it is rather pointless to include it, except for test builds. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-7-kraxel@redhat.com
2018-09-12udmabuf: constify udmabuf_create argsGerd Hoffmann1-2/+2
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-6-kraxel@redhat.com
2018-09-12udmabuf: constify udmabuf_opsGerd Hoffmann1-1/+1
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-5-kraxel@redhat.com
2018-09-12udmabuf: use pgoff_t for pagecountGerd Hoffmann1-1/+1
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-4-kraxel@redhat.com
2018-09-12udmabuf: improve map_udmabuf error handlingGerd Hoffmann1-11/+10
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-3-kraxel@redhat.com
2018-09-12udmabuf: sort headers, drop uapi/ path prefixGerd Hoffmann1-9/+8
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-2-kraxel@redhat.com
2018-09-11drm/vkms: Add kerneldoc entryHaneen Mohammed1-0/+9
Add an initial kerneldoc entry for vkms with a todo list. Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> [danvet: Keep the todo.rst entry to point at the vkms docs instead.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180907174136.GA2648@haneenDRM
2018-09-11drm/vkms: Enable/Disable cursor support with module optionHaneen Mohammed3-5/+14
Cursor support is not complete yet. Add module option 'enable_cursor' to enable/disable cursor support which is used for testing currently. Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/b47f44f518d3c9858f1469193f1136e0c490060b.1536210181.git.hamohammed.sa@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-28 03:02:08 +0000