summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-08-24fec: Restart PPS after link state changeCsókás Bence3-4/+77
On link state change, the controller gets reset, causing PPS to drop out and the PHC to lose its time and calibration. So we restart it if needed, restoring calibration and time registers. Changes since v2: * Add `fec_ptp_save_state()`/`fec_ptp_restore_state()` * Use `ktime_get_real_ns()` * Use `BIT()` macro Changes since v1: * More ECR #define's * Stop PPS in `fec_ptp_stop()` Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-23Merge tag 'mlx5-fixes-2022-08-22' of ↵Jakub Kicinski10-42/+64
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-08-22 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Unlock on error in mlx5_sriov_enable() net/mlx5e: Fix use after free in mlx5e_fs_init() net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup() net/mlx5: unlock on error path in esw_vfs_changed_event_handler() net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off net/mlx5e: TC, Add missing policer validation net/mlx5e: Fix wrong application of the LRO state net/mlx5: Avoid false positive lockdep warning by adding lock_class_key net/mlx5: Fix cmd error logging for manage pages cmd net/mlx5: Disable irq when locking lag_lock net/mlx5: Eswitch, Fix forwarding decision to uplink net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY net/mlx5e: Properly disable vlan strip on non-UL reps ==================== Link: https://lore.kernel.org/r/20220822195917.216025-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23Merge branch '100GbE' of ↵Jakub Kicinski4-29/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: xsk: reduced queue count fixes Maciej Fijalkowski says: this small series is supposed to fix the issues around AF_XDP usage with reduced queue count on interface. Due to the XDP rings setup, some configurations can result in sockets not seeing traffic flowing. More about this in description of patch 2. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: xsk: use Rx ring's XDP ring when picking NAPI context ice: xsk: prohibit usage of non-balanced queue id ==================== Link: https://lore.kernel.org/r/20220822163257.2382487-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: fix LRO/GRO_HW features in ndo_fix_features callbackVikas Gupta1-4/+1
LRO/GRO_HW should be disabled if there is an attached XDP program. BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be permanently disabled once they are disabled. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: fix NQ resource accounting during vf creation on 57500 chipsVikas Gupta1-1/+1
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: set missing reload flag in devlink featuresVikas Gupta1-0/+1
Add missing devlink_set_features() API for callbacks reload_down and reload_up to function. Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: Use PAGE_SIZE to init buffer when multi buffer XDP is not in usePavan Chebbi2-2/+9
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not sufficient when running single buffer XDP programs doing redirect operations. The stack will complain on missing skb tail room. Fix it by using PAGE_SIZE when calling xdp_init_buff() for single buffer programs. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23net: dsa: microchip: make learning configurable and keep it off while standaloneVladimir Oltean2-1/+45
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Leaving address learning enabled while ports are standalone breaks any kind of communication which involves port B receiving what port A has sent. Notably it breaks the ksz9477 driver used with a (non offloaded, ports act as if standalone) bonding interface in active-backup mode, when the ports are connected together through external switches, for redundancy purposes. This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which unconditionally leave address learning enabled even while ports operate as standalone. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/ Reported-by: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220818164809.3198039-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23net: ipvtap - add __init/__exit annotations to module init/exit funcsMaciej Żenczykowski1-2/+2
Looks to have been left out in an oversight. Cc: Mahesh Bandewar <maheshb@google.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Fixes: 235a9d89da97 ('ipvtap: IP-VLAN based tap driver') Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-22bonding: 3ad: make ad_ticks_per_sec a constJonathan Toppins2-9/+4
The value is only ever set once in bond_3ad_initialize and only ever read otherwise. There seems to be no reason to set the variable via bond_3ad_initialize when setting the global variable will do. Change ad_ticks_per_sec to a const to enforce its read-only usage. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22bonding: 802.3ad: fix no transmission of LACPDUsJonathan Toppins1-22/+16
This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net: moxa: get rid of asymmetry in DMA mapping/unmappingSergei Antonov1-5/+6
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we should unmap it from moxart_mac_stop(). Fixes 2 warnings. 1. During error unwinding in moxart_mac_probe(): "goto init_fail;", then moxart_mac_free_memory() calls dma_unmap_single() with priv->rx_mapping[i] pointers zeroed. WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980 DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes] CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from check_unmap+0x704/0x980 check_unmap from debug_dma_unmap_page+0x8c/0x9c debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218 moxart_mac_probe from platform_probe+0x48/0x88 platform_probe from really_probe+0xc0/0x2e4 2. After commands: ip link set dev eth0 down ip link set dev eth0 up WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec add_dma_entry from dma_map_page_attrs+0x110/0x328 dma_map_page_attrs from moxart_mac_open+0x134/0x320 moxart_mac_open from __dev_open+0x11c/0x1ec __dev_open from __dev_change_flags+0x194/0x22c __dev_change_flags from dev_change_flags+0x14/0x44 dev_change_flags from devinet_ioctl+0x6d4/0x93c devinet_ioctl from inet_ioctl+0x1ac/0x25c v1 -> v2: Extraneous change removed. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()Xiaolei Wang1-4/+4
For some MAC drivers, they set the mac_managed_pm to true in its ->ndo_open() callback. So before the mac_managed_pm is set to true, we still want to leverage the mdio_bus_phy_suspend()/resume() for the phy device suspend and resume. In this case, the phy device is in PHY_READY, and we shouldn't warn about this. It also seems that the check of mac_managed_pm in WARN_ON is redundant since we already check this in the entry of mdio_bus_phy_resume(), so drop it. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net: ipa: don't assume SMEM is page-alignedAlex Elder1-1/+1
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed) and then its virtual address is fetched using qcom_smem_get(). The physical address associated with that region is also fetched. The physical address is adjusted so that it is page-aligned, and an attempt is made to update the size of the region to compensate for any non-zero adjustment. But that adjustment isn't done properly. The physical address is aligned twice, and as a result the size is never actually adjusted. Fix this by *not* aligning the "addr" local variable, and instead making the "phys" local variable be the adjusted "addr" value. Fixes: a0036bb413d5b ("net: ipa: define SMEM memory region for IPA") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net: dsa: microchip: keep compatibility with device tree blobs with no phy-modeVladimir Oltean1-1/+7
DSA has multiple ways of specifying a MAC connection to an internal PHY. One requires a DT description like this: port@0 { reg = <0>; phy-handle = <&internal_phy>; phy-mode = "internal"; }; (which is IMO the recommended approach, as it is the clearest description) but it is also possible to leave the specification as just: port@0 { reg = <0>; } and if the driver implements ds->ops->phy_read and ds->ops->phy_write, the DSA framework "knows" it should create a ds->slave_mii_bus, and it should connect to a non-OF-based internal PHY on this MDIO bus, at an MDIO address equal to the port address. There is also an intermediary way of describing things: port@0 { reg = <0>; phy-handle = <&internal_phy>; }; In case 2, DSA calls phylink_connect_phy() and in case 3, it calls phylink_of_phy_connect(). In both cases, phylink_create() has been called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both cases, PHY_INTERFACE_MODE_NA is translated into phy->interface. It is important to note that phy_device_create() initializes dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the PHY. All this means that in order to maintain compatibility with device tree blobs where the phy-mode property is missing, we need to allow the "gmii" phy-mode and treat it as "internal". Fixes: 2c709e0bdad4 ("net: dsa: microchip: ksz8795: add phylink support") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216320 Reported-by: Craig McQueen <craig@mcqueen.id.au> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20220818143250.2797111-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net/mlx5: Unlock on error in mlx5_sriov_enable()Dan Carpenter1-1/+1
Unlock before returning if mlx5_device_enable_sriov() fails. Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5e: Fix use after free in mlx5e_fs_init()Dan Carpenter1-2/+3
Call mlx5e_fs_vlan_free(fs) before kvfree(fs). Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup()Dan Carpenter1-2/+2
Use the list_for_each_entry_safe() macro to prevent dereferencing "obj" after it has been freed. Fixes: c4dfe704f53f ("net/mlx5e: kTLS, Recycle objects of device-offloaded TLS TX connections") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5: unlock on error path in esw_vfs_changed_event_handler()Dan Carpenter1-1/+3
Unlock before returning on this error path. Fixes: f1bc646c9a06 ("net/mlx5: Use devl_ API in mlx5_esw_offloads_devlink_port_register") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5e: Fix wrong tc flag used when set hw-tc-offload offMaor Dickman1-1/+3
The cited commit reintroduced the ability to set hw-tc-offload in switchdev mode by reusing NIC mode calls without modifying it to support both modes, this can cause an illegal memory access when trying to turn hw-tc-offload off. Fix this by using the right TC_FLAG when checking if tc rules are installed while disabling hw-tc-offload. Fixes: d3cbd4254df8 ("net/mlx5e: Add ndo_set_feature for uplink representor") Signed-off-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5e: TC, Add missing policer validationRoi Dayan1-0/+4
There is a missing policer validation when offloading police action with tc action api. Add it. Fixes: 7d1a5ce46e47 ("net/mlx5e: TC, Support tc action api for police") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5e: Fix wrong application of the LRO stateAya Levin1-8/+0
Driver caches packet merge type in mlx5e_params instance which must be in perfect sync with the netdev_feature's bit. Prior to this patch, in certain conditions (*) LRO state was set in mlx5e_params, while netdev_feature's bit was off. Causing the LRO to be applied on the RQs (HW level). (*) This can happen only on profile init (mlx5e_build_nic_params()), when RQ expect non-linear SKB and PCI is fast enough in comparison to link width. Solution: remove setting of packet merge type from mlx5e_build_nic_params() as netdev features are not updated. Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5: Avoid false positive lockdep warning by adding lock_class_keyMoshe Shemesh1-0/+4
Add a lock_class_key per mlx5 device to avoid a false positive "possible circular locking dependency" warning by lockdep, on flows which lock more than one mlx5 device, such as adding SF. kernel log: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc8+ #2 Not tainted ------------------------------------------------------ kworker/u20:0/8 is trying to acquire lock: ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core] but task is already holding lock: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&notifier->n_head)->rwsem){++++}-{3:3}: down_write+0x90/0x150 blocking_notifier_chain_register+0x53/0xa0 mlx5_sf_table_init+0x369/0x4a0 [mlx5_core] mlx5_init_one+0x261/0x490 [mlx5_core] probe_one+0x430/0x680 [mlx5_core] local_pci_probe+0xd6/0x170 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x7c2/0x1340 worker_thread+0x6f6/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}: __lock_acquire+0x2fc7/0x6720 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 bus_for_each_drv+0x123/0x1a0 __device_attach+0x1a3/0x460 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 __auxiliary_device_add+0x88/0xc0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&notifier->n_head)->rwsem); lock(&dev->intf_state_mutex); lock(&(&notifier->n_head)->rwsem); lock(&dev->intf_state_mutex); *** DEADLOCK *** 4 locks held by kworker/u20:0/8: #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460 stack backtrace: CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? lock_chain_count+0x20/0x20 ? register_lock_class+0x1880/0x1880 __lock_acquire+0x2fc7/0x6720 ? register_lock_class+0x1880/0x1880 ? register_lock_class+0x1880/0x1880 lock_acquire+0x1c1/0x550 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 __mutex_lock+0x12c/0x14b0 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? _raw_read_unlock+0x1f/0x30 ? mutex_lock_io_nested+0x1320/0x1320 ? __ioremap_caller.constprop.0+0x306/0x490 ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core] ? iounmap+0x160/0x160 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 ? auxiliary_match_id+0xe9/0x140 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 ? driver_allows_async_probing+0x140/0x140 bus_for_each_drv+0x123/0x1a0 ? bus_for_each_dev+0x1a0/0x1a0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? trace_hardirqs_on+0x2d/0x100 __device_attach+0x1a3/0x460 ? device_driver_attach+0x1e0/0x1e0 ? kobject_uevent_env+0x22d/0xf10 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 ? dev_set_name+0xab/0xe0 ? __fw_devlink_link_to_suppliers+0x260/0x260 ? memset+0x20/0x40 ? lockdep_init_map_type+0x21a/0x7d0 __auxiliary_device_add+0x88/0xc0 ? auxiliary_device_init+0x86/0xa0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core] ? lock_downgrade+0x6e0/0x6e0 ? lockdep_hardirqs_on_prepare+0x286/0x400 process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5: Fix cmd error logging for manage pages cmdRoy Novich1-3/+6
When the driver unloads, give/reclaim_pages may fail as PF driver in teardown flow, current code will lead to the following kernel log print 'failed reclaiming pages: err 0'. Fix it to get same behavior as before the cited commits, by calling mlx5_cmd_check before handling error state. mlx5_cmd_check will verify if the returned error is an actual error needed to be handled by the driver or not and will return an appropriate value. Fixes: 8d564292a166 ("net/mlx5: Remove redundant error on reclaim pages") Fixes: 4dac2f10ada0 ("net/mlx5: Remove redundant notify fail on give pages") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5: Disable irq when locking lag_lockVlad Buslov1-22/+33
The lag_lock is taken from both process and softirq contexts which results lockdep warning[0] about potential deadlock. However, just disabling softirqs by using *_bh spinlock API is not enough since it will cause warning in some contexts where the lock is obtained with hard irqs disabled. To fix the issue save current irq state, disable them before obtaining the lock an re-enable irqs from saved state after releasing it. [0]: [Sun Aug 7 13:12:29 2022] ================================ [Sun Aug 7 13:12:29 2022] WARNING: inconsistent lock state [Sun Aug 7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted [Sun Aug 7 13:12:29 2022] -------------------------------- [Sun Aug 7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [Sun Aug 7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [Sun Aug 7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at: [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_nic_enable+0x114/0x470 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_resume+0x105/0x160 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_probe+0xac3/0x14f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] auxiliary_bus_probe+0x9d/0xe0 [Sun Aug 7 13:12:29 2022] really_probe+0x1e0/0xaa0 [Sun Aug 7 13:12:29 2022] __driver_probe_device+0x219/0x480 [Sun Aug 7 13:12:29 2022] driver_probe_device+0x49/0x130 [Sun Aug 7 13:12:29 2022] __driver_attach+0x1e4/0x4d0 [Sun Aug 7 13:12:29 2022] bus_for_each_dev+0x11e/0x1a0 [Sun Aug 7 13:12:29 2022] bus_add_driver+0x3f4/0x5a0 [Sun Aug 7 13:12:29 2022] driver_register+0x20f/0x390 [Sun Aug 7 13:12:29 2022] __auxiliary_driver_register+0x14e/0x260 [Sun Aug 7 13:12:29 2022] mlx5e_init+0x38/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb] [Sun Aug 7 13:12:29 2022] do_one_initcall+0xc4/0x400 [Sun Aug 7 13:12:29 2022] do_init_module+0x18a/0x620 [Sun Aug 7 13:12:29 2022] load_module+0x563a/0x7040 [Sun Aug 7 13:12:29 2022] __do_sys_finit_module+0x122/0x1d0 [Sun Aug 7 13:12:29 2022] do_syscall_64+0x3d/0x90 [Sun Aug 7 13:12:29 2022] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [Sun Aug 7 13:12:29 2022] irq event stamp: 3596508 [Sun Aug 7 13:12:29 2022] hardirqs last enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100 [Sun Aug 7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100 [Sun Aug 7 13:12:29 2022] softirqs last enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] other info that might help us debug this: [Sun Aug 7 13:12:29 2022] Possible unsafe locking scenario: [Sun Aug 7 13:12:29 2022] CPU0 [Sun Aug 7 13:12:29 2022] ---- [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] <Interrupt> [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] *** DEADLOCK *** [Sun Aug 7 13:12:29 2022] 4 locks held by swapper/0/0: [Sun Aug 7 13:12:29 2022] #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60 [Sun Aug 7 13:12:29 2022] #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570 [Sun Aug 7 13:12:29 2022] #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0 [Sun Aug 7 13:12:29 2022] stack backtrace: [Sun Aug 7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 [Sun Aug 7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [Sun Aug 7 13:12:29 2022] Call Trace: [Sun Aug 7 13:12:29 2022] <IRQ> [Sun Aug 7 13:12:29 2022] dump_stack_lvl+0x57/0x7d [Sun Aug 7 13:12:29 2022] mark_lock.part.0.cold+0x5f/0x92 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? unwind_next_frame+0x1c4/0x1b50 [Sun Aug 7 13:12:29 2022] ? secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? stack_access_ok+0x1d0/0x1d0 [Sun Aug 7 13:12:29 2022] ? start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] __lock_acquire+0x1260/0x6720 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? mark_lock.part.0+0xed/0x3060 [Sun Aug 7 13:12:29 2022] ? stack_trace_save+0x91/0xc0 [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x400/0x400 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] atomic_notifier_call_chain+0xd7/0x1d0 [Sun Aug 7 13:12:29 2022] br_switchdev_fdb_notify+0xea/0x100 [Sun Aug 7 13:12:29 2022] ? br_switchdev_set_port_flag+0x310/0x310 [Sun Aug 7 13:12:29 2022] fdb_notify+0x11b/0x150 [Sun Aug 7 13:12:29 2022] br_fdb_update+0x34c/0x570 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_fdb_add_local+0x50/0x50 [Sun Aug 7 13:12:29 2022] ? br_allowed_ingress+0x5f/0x1070 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] br_handle_frame_finish+0x786/0x18e0 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? sctp_inet_bind_verify+0x4d/0x190 [Sun Aug 7 13:12:29 2022] ? xlog_unpack_data+0x2e0/0x310 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_hook_thresh+0x227/0x380 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? setup_pre_routing+0x460/0x460 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter] [Sun Aug 7 13:12:29 2022] br_handle_frame+0x8a9/0x1270 [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? bond_handle_frame+0xf9/0xac0 [bonding] [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_core+0x7c0/0x2c70 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? generic_xdp_tx+0x5b0/0x5b0 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_list_core+0x2d7/0x8a0 [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? process_backlog+0x960/0x960 [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x129/0x400 [Sun Aug 7 13:12:29 2022] ? kvm_clock_get_cycles+0x14/0x20 [Sun Aug 7 13:12:29 2022] netif_receive_skb_list_internal+0x5f4/0xd60 [Sun Aug 7 13:12:29 2022] ? do_xdp_generic+0x150/0x150 [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core] [Sun Aug 7 13:12:29 2022] napi_complete_done+0x188/0x710 [Sun Aug 7 13:12:29 2022] mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? __queue_work+0x53c/0xeb0 [Sun Aug 7 13:12:29 2022] __napi_poll+0x9f/0x540 [Sun Aug 7 13:12:29 2022] net_rx_action+0x420/0xb70 [Sun Aug 7 13:12:29 2022] ? napi_threaded_poll+0x470/0x470 [Sun Aug 7 13:12:29 2022] ? __common_interrupt+0x79/0x1a0 [Sun Aug 7 13:12:29 2022] __do_softirq+0x271/0x92c [Sun Aug 7 13:12:29 2022] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] common_interrupt+0x7d/0xa0 [Sun Aug 7 13:12:29 2022] </IRQ> [Sun Aug 7 13:12:29 2022] <TASK> [Sun Aug 7 13:12:29 2022] asm_common_interrupt+0x22/0x40 [Sun Aug 7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60 [Sun Aug 7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00 [Sun Aug 7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242 [Sun Aug 7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc [Sun Aug 7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac [Sun Aug 7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3 [Sun Aug 7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000 [Sun Aug 7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000 [Sun Aug 7 13:12:29 2022] ? default_idle_call+0xcc/0x460 [Sun Aug 7 13:12:29 2022] default_idle_call+0xec/0x460 [Sun Aug 7 13:12:29 2022] do_idle+0x394/0x450 [Sun Aug 7 13:12:29 2022] ? arch_cpu_idle_exit+0x40/0x40 [Sun Aug 7 13:12:29 2022] cpu_startup_entry+0x19/0x20 [Sun Aug 7 13:12:29 2022] rest_init+0x156/0x250 [Sun Aug 7 13:12:29 2022] arch_call_rest_init+0xf/0x15 [Sun Aug 7 13:12:29 2022] start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] </TASK> Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5: Eswitch, Fix forwarding decision to uplinkEli Cohen1-1/+2
Make sure to modify the rule for uplink forwarding only for the case where destination vport number is MLX5_VPORT_UPLINK. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READYEli Cohen1-1/+1
Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered. Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev have valid pointers when MLX5_LAG_FLAG_NDEVS_READY is set. The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and clearing it. Setting it is done wrongly when both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set; clearing it is done right when either of ldev->pf[i].netdev is cleared. Consider the following scenario: 1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer 2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in MLX5_LAG_FLAG_NDEVS_READY is set. 3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev. MLX5_LAG_FLAG_NDEVS_READY remains set. Further execution of mlx5_do_bond() will result in null pointer dereference when calling mlx5_lag_is_multipath() This patch fixes the following call trace actually encountered: [ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8 [ 1293.478756] #PF: supervisor read access in kernel mode [ 1293.481320] #PF: error_code(0x0000) - not-present page [ 1293.483686] PGD 0 P4D 0 [ 1293.484434] Oops: 0000 [#1] SMP PTI [ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1 [ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core] [ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8 [ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202 [ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000 [ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000 [ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c [ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0 [ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858 [ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000 [ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0 [ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 8a66e4585979 ("net/mlx5: Change ownership model for lag") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22net/mlx5e: Properly disable vlan strip on non-UL repsVlad Buslov1-0/+2
When querying mlx5 non-uplink representors capabilities with ethtool rx-vlan-offload is marked as "off [fixed]". However, it is actually always enabled because mlx5e_params->vlan_strip_disable is 0 by default when initializing struct mlx5e_params instance. Fix the issue by explicitly setting the vlan_strip_disable to 'true' for non-uplink representors. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-08-22ice: xsk: use Rx ring's XDP ring when picking NAPI contextMaciej Fijalkowski4-29/+48
Ice driver allocates per cpu XDP queues so that redirect path can safely use smp_processor_id() as an index to the array. At the same time though, XDP rings are used to pick NAPI context to call napi_schedule() or set NAPIF_STATE_MISSED. When user reduces queue count, say to 8, and num_possible_cpus() of underlying platform is 44, then this means queue vectors with correlated NAPI contexts will carry several XDP queues. This in turn can result in a broken behavior where NAPI context of interest will never be scheduled and AF_XDP socket will not process any traffic. To fix this, let us change the way how XDP rings are assigned to Rx rings and use this information later on when setting ice_tx_ring::xsk_pool pointer. For each Rx ring, grab the associated queue vector and walk through Tx ring's linked list. Once we stumble upon XDP ring in it, assign this ring to ice_rx_ring::xdp_ring. Previous [0] approach of fixing this issue was for txonly scenario because of the described grouping of XDP rings across queue vectors. So, relying on Rx ring meant that NAPI context could be scheduled with a queue vector without XDP ring with associated XSK pool. [0]: https://lore.kernel.org/netdev/20220707161128.54215-1-maciej.fijalkowski@intel.com/ Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-22ice: xsk: prohibit usage of non-balanced queue idMaciej Fijalkowski1-0/+6
Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-22nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeoutDuoming Zhou1-0/+1
When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22r8152: fix the RX FIFO settings when suspendingHayes Wang1-0/+10
The RX FIFO would be changed when suspending, so the related settings have to be modified, too. Otherwise, the flow control would work abnormally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333 Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net> Fixes: cdf0b86b250f ("r8152: fix a WOL issue") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22r8152: fix the units of some registers for RTL8156AHayes Wang1-15/+2
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-19Revert "net: macsec: update SCI upon MAC address change."Sabrina Dubroca1-6/+5
This reverts commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823. Commit 6fc498bc8292 states: SCI should be updated, because it contains MAC in its first 6 octets. That's not entirely correct. The SCI can be based on the MAC address, but doesn't have to be. We can also use any 64-bit number as the SCI. When the SCI based on the MAC address, it uses a 16-bit "port number" provided by userspace, which commit 6fc498bc8292 overwrites with 1. In addition, changing the SCI after macsec has been setup can just confuse the receiver. If we configure the RXSC on the peer based on the original SCI, we should keep the same SCI on TX. When the macsec device is being managed by a userspace key negotiation daemon such as wpa_supplicant, commit 6fc498bc8292 would also overwrite the SCI defined by userspace. Fixes: 6fc498bc8292 ("net: macsec: update SCI upon MAC address change.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-19net: dpaa: Fix <1G ethernet on LS1046ARDBSean Anderson1-1/+5
As discussed in commit 73a21fa817f0 ("dpaa_eth: support all modes with rate adapting PHYs"), we must add a workaround for Aquantia phys with in-tree support in order to keep 1G support working. Update this workaround for the AQR113C phy found on revision C LS1046ARDB boards. Fixes: 12cf1b89a668 ("net: phy: Add support for AQR113C EPHY") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220818164029.2063293-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18Merge tag 'net-6.0-rc2' of ↵Linus Torvalds35-452/+1645
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF socket maps get data out of the TCP stack) - tls: rx: react to strparser initialization errors - netfilter: nf_tables: fix scheduling-while-atomic splat - net: fix suspicious RCU usage in bpf_sk_reuseport_detach() Current release - new code bugs: - mlxsw: ptp: fix a couple of races, static checker warnings and error handling Previous releases - regressions: - netfilter: - nf_tables: fix possible module reference underflow in error path - make conntrack helpers deal with BIG TCP (skbs > 64kB) - nfnetlink: re-enable conntrack expectation events - net: fix potential refcount leak in ndisc_router_discovery() Previous releases - always broken: - sched: cls_route: disallow handle of 0 - neigh: fix possible local DoS due to net iface start/stop loop - rtnetlink: fix module refcount leak in rtnetlink_rcv_msg - sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu - virtio_net: fix endian-ness for RSS - dsa: mv88e6060: prevent crash on an unused port - fec: fix timer capture timing in `fec_ptp_enable_pps()` - ocelot: stats: fix races, integer wrapping and reading incorrect registers (the change of register definitions here accounts for bulk of the changed LoC in this PR)" * tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) net: moxa: MAC address reading, generating, validity checking tcp: handle pure FIN case correctly tcp: refactor tcp_read_skb() a bit tcp: fix tcp_cleanup_rbuf() for tcp_read_skb() tcp: fix sock skb accounting in tcp_read_skb() igb: Add lock to avoid data race dt-bindings: Fix incorrect "the the" corrections net: genl: fix error path memory leak in policy dumping stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove() net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run net/mlx5e: Allocate flow steering storage during uplink initialization net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset net: mscc: ocelot: make struct ocelot_stat_layout array indexable net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work net: mscc: ocelot: turn stats_lock into a spinlock net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it ...
2022-08-18net: moxa: MAC address reading, generating, validity checkingSergei Antonov1-6/+7
This device does not remember its MAC address, so add a possibility to get it from the platform. If it fails, generate a random address. This will provide a MAC address early during boot without user space being involved. Also remove extra calls to is_valid_ether_addr(). Made after suggestions by Andrew Lunn: 1) Use eth_hw_addr_random() to assign a random MAC address during probe. 2) Remove is_valid_ether_addr() from moxart_mac_open() 3) Add a call to platform_get_ethdev_address() during probe 4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this v1 -> v2: Handle EPROBE_DEFER returned from platform_get_ethdev_address(). Move MAC reading code to the beginning of the probe function. Signed-off-by: Sergei Antonov <saproj@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> CC: Yang Yingliang <yangyingliang@huawei.com> CC: Pavel Skripkin <paskripkin@gmail.com> CC: Guobin Huang <huangguobin4@huawei.com> CC: Yang Wei <yang.wei9@zte.com.cn> CC: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18igb: Add lock to avoid data raceLin Ma2-1/+13
The commit c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834ce541 ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18Merge branch '100GbE' of ↵Jakub Kicinski6-18/+85
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-17 (ice) This series contains updates to ice driver only. Grzegorz prevents modifications to VLAN 0 when setting VLAN promiscuous as it will already be set. He also ignores -EEXIST error when attempting to set promiscuous and ensures promiscuous mode is properly cleared from the hardware when being removed. Benjamin ignores additional -EEXIST errors when setting promiscuous mode since the existing mode is the desired mode. Sylwester fixes VFs to allow sending of tagged traffic when no VLAN filters exist. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix VF not able to send tagged traffic with no VLAN filters ice: Ignore error message when setting same promiscuous mode ice: Fix clearing of promisc mode with bridge over bond ice: Ignore EEXIST when setting promisc mode ice: Fix double VLAN error when entering promisc mode ==================== Link: https://lore.kernel.org/r/20220817171329.65285-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18stmmac: intel: Add a missing clk_disable_unprepare() call in ↵Christophe JAILLET1-0/+1
intel_eth_pci_remove() Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove paths") removed this clk_disable_unprepare() This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock handling on remove path") which removed this clk_disable_unprepare() because: " While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. " However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver") has updated stmmac_dvr_remove() which do not call clk_disable_unprepare() anymore. So this call should now be called from intel_eth_pci_remove(). Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18tee: add overflow check in register_shm_helper()Jens Wiklander1-0/+3
With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early. Fixes: 033ddf12bcf5 ("tee: add register user memory") Cc: stable@vger.kernel.org Reported-by: Nimish Mishra <neelam.nimish@gmail.com> Reported-by: Anirban Chakraborty <ch.anirban00727@gmail.com> Reported-by: Debdeep Mukhopadhyay <debdeep.mukhopadhyay@gmail.com> Suggested-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-17net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_runLorenzo Bianconi1-1/+1
Fix possible NULL pointer dereference in mtk_xdp_run() if the ebpf program returns XDP_TX and xdp_convert_buff_to_frame routine fails returning NULL. Fixes: 5886d26fd25bb ("net: ethernet: mtk_eth_soc: add xmit XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/627a07d759020356b64473e09f0855960e02db28.1660659112.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net/mlx5e: Allocate flow steering storage during uplink initializationLeon Romanovsky1-8/+17
IPsec code relies on valid priv->fs pointer that is the case in NIC flow, but not correct in uplink. Before commit that mentioned in the Fixes line, that pointer was valid in all flows as it was allocated together with priv struct. In addition, the cleanup representors routine called to that not-initialized priv->fs pointer and its internals which caused NULL deference. So, move FS allocation to be as early as possible. Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ae46fa5bed3c67f937bfdfc0370101278f5422f1.1660639564.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ↵Vladimir Oltean1-27/+26
ocelot->stats Rather than reading the stats64 counters directly from the 32-bit hardware, it's better to rely on the output produced by the periodic ocelot_port_update_stats(). It would be even better to call ocelot_port_update_stats() right from ocelot_get_stats64() to make sure we report the current values rather than the ones from 2 seconds ago. But we need to export ocelot_port_update_stats() from the switch lib towards the switchdev driver for that, and future work will largely undo that. There are more ocelot-based drivers waiting to be introduced, an example of which is the SPI-controlled VSC7512. In that driver's case, it will be impossible to call ocelot_port_update_stats() from ndo_get_stats64 context, since the latter is atomic, and reading the stats over SPI is sleepable. So the compromise taken here, which will also hold going forward, is to report 64-bit counters to stats64, which are not 100% up to date. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offsetVladimir Oltean5-285/+478
With so many counter addresses recently discovered as being wrong, it is desirable to at least have a central database of information, rather than two: one through the SYS_COUNT_* registers (used for ndo_get_stats64), and the other through the offset field of struct ocelot_stat_layout elements (used for ethtool -S). The strategy will be to keep the SYS_COUNT_* definitions as the single source of truth, but for that we need to expand our current definitions to cover all registers. Then we need to convert the ocelot region creation logic, and stats worker, to the read semantics imposed by going through SYS_COUNT_* absolute register addresses, rather than offsets of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been SYS_CNT, by the way). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: make struct ocelot_stat_layout array indexableVladimir Oltean4-298/+1146
The ocelot counters are 32-bit and require periodic reading, every 2 seconds, by ocelot_port_update_stats(), so that wraparounds are detected. Currently, the counters reported by ocelot_get_stats64() come from the 32-bit hardware counters directly, rather than from the 64-bit accumulated ocelot->stats, and this is a problem for their integrity. The strategy is to make ocelot_get_stats64() able to cherry-pick individual stats from ocelot->stats the way in which it currently reads them out from SYS_COUNT_* registers. But currently it can't, because ocelot->stats is an opaque u64 array that's used only to feed data into ethtool -S. To solve that problem, we need to make ocelot->stats indexable, and associate each element with an element of struct ocelot_stat_layout used by ethtool -S. This makes ocelot_stat_layout a fat (and possibly sparse) array, so we need to change the way in which we access it. We no longer need OCELOT_STAT_END as a sentinel, because we know the array's size (OCELOT_NUM_STATS). We just need to skip the array elements that were left unpopulated for the switch revision (ocelot, felix, seville). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_workVladimir Oltean1-0/+4
The 2 methods can run concurrently, and one will change the window of counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is similar to what commit 7fbf6795d127 ("net: mscc: ocelot: fix mutex lock error during ethtool stats read") has done for ethtool -S. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: turn stats_lock into a spinlockVladimir Oltean2-8/+7
ocelot_get_stats64() currently runs unlocked and therefore may collide with ocelot_port_update_stats() which indirectly accesses the same counters. However, ocelot_get_stats64() runs in atomic context, and we cannot simply take the sleepable ocelot->stats_lock mutex. We need to convert it to an atomic spinlock first. Do that as a preparatory change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counterVladimir Oltean1-1/+1
This register, used as part of stats->tx_dropped in ocelot_get_stats64(), has a wrong address. At the address currently given, there is actually the c_tx_green_prio_6 counter. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: mscc: ocelot: fix incorrect ndo_get_stats64 packet countersVladimir Oltean4-28/+38
Reading stats using the SYS_COUNT_* register definitions is only used by ocelot_get_stats64() from the ocelot switchdev driver, however, currently the bucket definitions are incorrect. Separately, on both RX and TX, we have the following problems: - a 256-1023 bucket which actually tracks the 256-511 packets - the 1024-1526 bucket actually tracks the 512-1023 packets - the 1527-max bucket actually tracks the 1024-1526 packets => nobody tracks the packets from the real 1527-max bucket Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS all track the wrong thing. However this doesn't seem to have any consequence, since ocelot_get_stats64() doesn't use these. Even though this problem only manifests itself for the switchdev driver, we cannot split the fix for ocelot and for DSA, since it requires fixing the bucket definitions from enum ocelot_reg, which makes us necessarily adapt the structures from felix and seville as well. Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 15:07:02 +0000