| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Vishal Verma:
- Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver
where accounting for poison blocks to be cleared was off by one,
causing a failure to clear the the last badblock in an nvdimm region.
* tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Fix badblocks clear off-by-one error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar)"
* tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some issues in cpufreq drivers and some issues in devfreq:
- Fix error code path issues related PROBE_DEFER handling in devfreq
(Christian Marangi)
- Revert an editing accident in SPDX-License line in the devfreq
passive governor (Lukas Bulwahn)
- Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
devfreq driver (Miaoqian Lin)
- Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He)
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd)
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
Regno)
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"
* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: passive: revert an editing accident in SPDX-License line
PM / devfreq: Fix kernel warning with cpufreq passive register fail
PM / devfreq: Rework freq_table to be local to devfreq struct
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
PM / devfreq: Mute warning on governor PROBE_DEFER
PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
|
|
Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the
following one:
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su).
* pm-cpufreq:
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix error handling in ibmaem driver initialization
- Fix bad data reported by occ driver after setting power cap
- Fix typos in pmbus/ucd9200 driver comments
* tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
hwmon: (pmbus/ucd9200) fix typos in comments
hwmon: (occ) Prevent power cap command overwriting poll response
|
|
If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.
Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix purgatory build process so bin2c tool does not get built
unnecessarily and the Makefile is more consistent with other
architectures.
- Return earlier simple design of arch_get_random_seed_long|int() and
arch_get_random_long|int() callbacks as result of changes in generic
RNG code.
- Fix minor comment typos and spelling mistakes.
* tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: Fix spelling mistake
s390/sclp: Fix typo in comments
s390/archrandom: simplify back to earlier design and initialize earlier
s390/purgatory: remove duplicated build rule of kexec-purgatory.o
s390/purgatory: hard-code obj-y in Makefile
s390: remove unneeded 'select BUILD_BIN2C'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Three fixes for invalid memory accesses discovered by using KASAN
while running the lvm2 testsuite's dm-raid tests. Includes changes to
MD's raid5.c given the dependency dm-raid has on the MD code"
* tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm raid: fix KASAN warning in raid5_add_disks
dm raid: fix KASAN warning in raid5_remove_disk
dm raid: fix accesses beyond end of raid member array
|
|
Pull block fixes from Jens Axboe:
- Fix for batch getting of tags in sbitmap (wuchi)
- NVMe pull request via Christoph:
- More quirks (Lamarque Vieira Souza, Pablo Greco)
- Fix a fabrics disconnect regression (Ruozhu Li)
- Fix a nvmet-tcp data_digest calculation regression (Sagi
Grimberg)
- Fix nvme-tcp send failure handling (Sagi Grimberg)
- Fix a regression with nvmet-loop and passthrough controllers
(Alan Adamson)
* tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1
nvmet: add a clear_ids attribute for passthru targets
nvme: fix regression when disconnect a recovering ctrl
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
nvme-tcp: always fail a request when sending it failed
nvmet-tcp: fix regression in data_digest calculation
lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One simple driver fix for a dma overrun"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Limit max hw sectors for v3 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
- Fix a compilation warning with some versions of gcc/sparse when
compiling the pata_cs5535 driver, from John.
* tag 'ata-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_cs5535: Fix W=1 warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small fixes
- Initialize a spinlock in the stm32 reset code
- Add dt bindings to the clk maintainer filepattern"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
MAINTAINERS: add include/dt-bindings/clock to COMMON CLK FRAMEWORK
clk: stm32: rcc_reset: Fix missing spin_lock_init()
|
|
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
|
|
Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].
It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.
So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.
Fixes: 7d4b564d6add ("net: dsa: felix: support psfp filter on vsc9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.
Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.
Fixes: a8fc8cb5692a ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding/deleting mdb entries on other net_devices, eg., tap
interfaces, it should not crash.
Fixes: 3bacfccdcb2d ("net: sparx5: Add mdb handlers")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add RaptorLake to the list of processor models supported by the Intel
TCC cooling driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the repeated word 'and' from comments
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220622142713.14187-1-jiangjian@cdjrlc.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:
- qedr not setting the QP timeout properly toward userspace
- Memory leak on error path in ib_cm
- Divide by 0 in RDMA interrupt moderation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/cm: Fix memory leak in ib_cm_insert_listen
RDMA/qedr: Fix reporting QP timeout attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that breaks the ccp driver"
* tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix device IRQ counting by using platform_irq_count()
|
|
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.
We should use devm_add_action_or_reset() instead of devm_add_action().
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.
A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.
Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.
Fixes: dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list")
Fixes: a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch corrects packet receiving in ax88179_rx_fixup.
- problem observed:
ifconfig shows allways a lot of 'RX Errors' while packets
are received normally.
This occurs because ax88179_rx_fixup does not recognise properly
the usb urb received.
The packets are normally processed and at the end, the code exits
with 'return 0', generating RX Errors.
(pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
another packet there)
This is a usb urb received by "tcpdump -i usbmon2 -X" on a
little-endian CPU:
0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
^ packet 1 start (pkt_len = 0x05ec)
^^^^ IP alignment pseudo header
^ ethernet packet start
last byte ethernet packet v
padding (8-bytes aligned) vvvv vvvv
0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811
0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 2
0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
...
0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
...
0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
...
0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
...
0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 7
0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
0x2130: f032 e093 7489 0740 3008 ec05 0000 0080
====1==== ====2====
hdr_off ^
pkt_len = 0x05ec ^^^^
AX_RXHDR_*=0x00830 ^^^^ ^
pkt_len = 0 ^^^^
AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^
0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080
0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080
0x2160: 3008 5803 0000 0080 3008 c800 0000 0080
===11==== ===12==== ===13==== ===14====
0x2170: 0000 0000 0e00 3821
^^^^ ^^^^ rx_hdr
^^^^ pkt_cnt=14
^^^^ hdr_off=0x2138
^^^^ ^^^^ padding
The dump shows that pkt_cnt is the number of entrys in the
per-packet metadata. It is "2 * packet count".
Each packet have two entrys. The first have a valid
value (pkt_len and AX_RXHDR_*) and the second have a
dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
Why exists dummy-header for each packet?!?
My guess is that this was done probably to align the
entry for each packet to 64-bits and maintain compatibility
with old firmware.
There is also a padding (0x00000000) before the rx_hdr to
align the end of rx_hdr to 64-bit.
Note that packets have a alignment of 64-bits (8-bytes).
This patch assumes that the dummy-header and the last
padding are optional. So it preserves semantics and
recognises the same valid packets as the current code.
This patch was made using only the dumpfile information and
tested with only one device:
0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Fixes: 57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup")
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target. By default, loop targets will set clear_ids to
true.
This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.
Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"),
resolve case, when there is several aggregation groups in the same bond.
bond_3ad_unbind_slave will invalidate (clear) aggregator when
__agg_active_ports return zero. So, ad_clear_agg can be executed even, when
num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for,
previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave
will not update slave ports list, because lag_ports==NULL. So, here we
got slave ports, pointing to freed aggregator memory.
Fix with checking actual number of ports in group (as was before
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ),
before ad_clear_agg().
The KASAN logs are as follows:
[ 767.617392] ==================================================================
[ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470
[ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767
[ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15
[ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT)
[ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler
[ 767.666468] Call trace:
[ 767.668930] dump_backtrace+0x0/0x2d0
[ 767.672625] show_stack+0x24/0x30
[ 767.675965] dump_stack_lvl+0x68/0x84
[ 767.679659] print_address_description.constprop.0+0x74/0x2b8
[ 767.685451] kasan_report+0x1f0/0x260
[ 767.689148] __asan_load2+0x94/0xd0
[ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470
Fixes: 0622cab0341c ("bonding: fix 802.3ad aggregator reselection")
Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of asix_ax88772a_link_change_notify() workaround, we run soft
reset which will automatically clear MII_ADVERTISE configuration. The
PHYlib framework do not know about changed configuration state of the
PHY, so we need use phy_init_hw() to reinit PHY configuration.
Fixes: dde258469257 ("net: usb/phy: asix: add support for ax88772A/C PHYs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:
They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase. Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().
Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended: Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.
Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended. Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source. (Those conditions are
identical to mdio_bus_phy_may_suspend().) Postpone handling of the
interrupt until the PHY has resumed.
Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion. That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.
Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.
The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.
Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
usbnet provides some helper functions that are also used in
the context of reset() operations. During a reset the other
drivers on a device are unable to operate. As that can be block
drivers, a driver for another interface cannot use paging
in its memory allocations without risking a deadlock.
Use GFP_NOIO in the helpers.
Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.19-2022-06-29:
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629192220.5870-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.19-rc5:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/871qv7rblv.fsf@intel.com
|
|
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
There's a KASAN warning in raid5_remove_disk when running the LVM
testsuite. We fix this warning by verifying that the "number" variable is
within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
x86_64 allmodconfig build with W=1 gives these warnings:
drivers/ata/pata_cs5535.c: In function ‘cs5535_set_piomode’:
drivers/ata/pata_cs5535.c:93:11: error: variable ‘dummy’ set but not
used [-Werror=unused-but-set-variable]
u32 reg, dummy;
^~~~~
drivers/ata/pata_cs5535.c: In function ‘cs5535_set_dmamode’:
drivers/ata/pata_cs5535.c:132:11: error: variable ‘dummy’ set but not
used [-Werror=unused-but-set-variable]
u32 reg, dummy;
^~~~~
cc1: all warnings being treated as errors
Mark variables 'dummy' as "maybe unused" as they are only ever written
in rdmsr() calls.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Drop the redundant word 'the' in the comments following
/*
* Set PHASE registers on all pages to 0xff to ensure that phase
* specific commands will apply to all phases of a given page (rail).
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
* for the [the - DROP] phases of the rail.
*/
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622063231.20612-1-jiangjian@cdjrlc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently, the response to the power cap command overwrites the
first eight bytes of the poll response, since the commands use
the same buffer. This means that user's get the wrong data between
the time of sending the power cap and the next poll response update.
Fix this by specifying a different buffer for the power cap command
response.
Fixes: 5b5513b88002 ("hwmon: Add On-Chip Controller (OCC) hwmon driver")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628203029.51747-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit 26984d9d581e ("PM / devfreq: passive: Keep cpufreq_policy for
possible cpus") reworked governor_passive.c, and accidently added a
tab in the first line, i.e., the SPDX-License-Identifier line.
The checkpatch script warns with the SPDX_LICENSE_TAG warning, and hence
pointed this issue out while investigating checkpatch warnings.
Revert this editing accident. No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Remove cpufreq_passive_unregister_notifier from
cpufreq_passive_register_notifier in case of error as devfreq core
already call unregister on GOV_START fail.
This fix the kernel always printing a WARN on governor PROBE_DEFER as
cpufreq_passive_unregister_notifier is called two times and return
error on the second call as the cpufreq is already unregistered.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
On a devfreq PROBE_DEFER, the freq_table in the driver profile struct,
is never reset and may be leaved in an undefined state.
This comes from the fact that we store the freq_table in the driver
profile struct that is commonly defined as static and not reset on
PROBE_DEFER.
We currently skip the reinit of the freq_table if we found
it's already defined since a driver may declare his own freq_table.
This logic is flawed in the case devfreq core generate a freq_table, set
it in the profile struct and then PROBE_DEFER, freeing the freq_table.
In this case devfreq will found a NOT NULL freq_table that has been
freed, skip the freq_table generation and probe the driver based on the
wrong table.
To fix this and correctly handle PROBE_DEFER, use a local freq_table and
max_state in the devfreq struct and never modify the freq_table present
in the profile struct if it does provide it.
Fixes: 0ec09ac2cebe ("PM / devfreq: Set the freq_table of devfreq device")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
This function only calls of_node_put() in normal path,
missing it in error paths.
Add missing of_node_put() to avoid refcount leak.
Fixes: f262f28c1470 ("PM / devfreq: event: Add devfreq_event class")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
HZ macros has been centralized in units.h since [1]. Use it to avoid
duplicated definition.
[1] commit e2c77032fcbe ("units: add the HZ macros")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
With the passive governor, the cpu based scaling can PROBE_DEFER due to
the fact that CPU policy are not ready.
The cpufreq passive unregister notifier is called both from the
GOV_START errors and for the GOV_STOP and assume the notifier is
successfully registred every time. With GOV_START failing it's wrong to
loop over each possible CPU since the register path has failed for
some CPU policy not ready. Change the logic and unregister the notifer
based on the current allocated parent_cpu_data list to correctly handle
errors and the governor unregister path.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Don't print warning when a governor PROBE_DEFER as it's not a real
GOV_START fail.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The cpufreq passive register notifier can PROBE_DEFER and the devfreq
struct is freed and then reallocaed on probe retry.
The current logic assume that the code can't PROBE_DEFER so the devfreq
struct in the this variable in devfreq_passive_data is assumed to be
(if already set) always correct.
This cause kernel panic as the code try to access the wrong address.
To correctly handle this, update the this variable in
devfreq_passive_data to the devfreq reallocated struct.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This reverts commit 92020e81ddbeac351ea4a19bcf01743f32b9c800.
This causes stuttering and timeouts with DMCUB for some users
so revert it until we understand why and safely enable it
to save power.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1887
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: stable@vger.kernel.org
|
|
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1
When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.
v2:fix indentation
v3:change subject and fix indentation
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use the correct adev variable for the drm_fb_helper in
amdgpu_device_gpu_recover(). Noticed by inspection.
Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes
- panasonic-laptop: missing hotkey presses regression fix
- some hardware-id additions
- some other small fixes
* tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: Ignore Sanitization Mode event
platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
platform/x86: thinkpad-acpi: profile capabilities as integer
platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
platform/x86: panasonic-laptop: don't report duplicate brightness key-presses
platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"
platform/x86: panasonic-laptop: sort includes alphabetically
platform/x86: panasonic-laptop: de-obfuscate button codes
ACPI: video: Change how we determine if brightness key-presses are handled
platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter
platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver
|
