| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Two touchpad/trackstick combos are currently not behaving properly.
They define a mouse emulation collection, as per Win8 requirements,
but also define a separate mouse collection for the trackstick.
The way the kernel currently treat the collections is that it
merges both in one device. However, given that the first mouse
collection already defines X,Y and left, right buttons, when
mapping the events from the second mouse collection, hid-multitouch
sees that these events are already mapped, and simply ignores them.
To be able to report events from the tracktick, add a new quirked
class for it, and manually add the 2 devices we know about.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207235
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Wacom driver functional and regression fixes from Jason Gerecke
- race condition fix in usbhid, found by syzbot and fixed by Alan Stern
- a few device-specific quirks and ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock
HID: mcp2221: add gpiolib dependency
HID: i2c-hid: reset Synaptics SYNA2393 on resume
HID: wacom: Report 2nd-gen Intuos Pro S center button status over BT
HID: usbhid: Fix race between usbhid_close() and usbhid_stop()
Revert "HID: wacom: generic: read the number of expected touches on a per collection basis"
HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead
HID: alps: Add AUI1657 device ID
HID: logitech: Add support for Logitech G11 extra keys
HID: multitouch: add eGalaxTouch P80H84 support
HID: wacom: Read HID_DG_CONTACTMAX directly for non-generic devices
|
|
Pull virtio fixes from Michael Tsirkin:
"A couple of bug fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: vsock: kick send_pkt worker once device is started
virtio-blk: handle block_device_operations callbacks after hot unplug
|
|
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a memory leak when dev_iommu gets freed and a sub-pointer does
not
- Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
driver
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix AMD IOMMU interrupt remapping when x2apic is enabled
- Fix error path in the QCOM IOMMU driver probe function
* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Fix local_base status check
iommu: Properly export iommu_group_get_for_dev()
iommu/vt-d: Use right Kconfig option name
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
iommu/mediatek: Fix MTK_IOMMU dependencies
iommu: Fix the memory leak in dev_iommu_free()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- prevent the intel_pstate driver from printing excessive diagnostic
messages in some cases (Chris Wilson)
- make the hibernation restore kernel freeze kernel threads as well as
user space tasks (Dexuan Cui)
- fix the ACPI device PM disagnostic messages to include the correct
power state name (Kai-Heng Feng).
* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: ACPI: Output correct message on target power state
PM: hibernate: Freeze kernel threads in software_resume()
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
* pm-sleep:
PM: hibernate: Freeze kernel threads in software_resume()
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Core:
- Documentation typo fixes
- fix the channel indexes
- dmatest: fixes for process hang and iterations
Drivers:
- hisilicon: build error fix without PCI_MSI
- ti-k3: deadlock fix
- uniphier-xdmac: fix for reg region
- pch: fix data race
- tegra: fix clock state"
* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dmatest: Fix process hang when reading 'wait' parameter
dmaengine: dmatest: Fix iteration non-stop logic
dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
dmaengine: fix channel index enumeration
dmaengine: mmp_tdma: Reset channel error on release
dmaengine: mmp_tdma: Do not ignore slave config validation errors
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
dt-bindings: dma: uniphier-xdmac: switch to single reg region
include/linux/dmaengine: Typos fixes in API documentation
dmaengine: xilinx_dma: Add missing check for empty list
dmaengine: ti: k3-psil: fix deadlock on error path
dmaengine: hisilicon: Fix build error without PCI_MSI
|
|
Ning Bo reported an abnormal 2-second gap when booting Kata container [1].
The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of
connecting from the client side. The vhost vsock client tries to connect
an initializing virtio vsock server.
The abnormal flow looks like:
host-userspace vhost vsock guest vsock
============== =========== ============
connect() --------> vhost_transport_send_pkt_work() initializing
| vq->private_data==NULL
| will not be queued
V
schedule_timeout(2s)
vhost_vsock_start() <--------- device ready
set vq->private_data
wait for 2s and failed
connect() again vq->private_data!=NULL recv connecting pkt
Details:
1. Host userspace sends a connect pkt, at that time, guest vsock is under
initializing, hence the vhost_vsock_start has not been called. So
vq->private_data==NULL, and the pkt is not been queued to send to guest
2. Then it sleeps for 2s
3. After guest vsock finishes initializing, vq->private_data is set
4. When host userspace wakes up after 2s, send connecting pkt again,
everything is fine.
As suggested by Stefano Garzarella, this fixes it by additional kicking the
send_pkt worker in vhost_vsock_start once the virtio device is started. This
makes the pending pkt sent again.
After this patch, kata-runtime (with vsock enabled) boot time is reduced
from 3s to 1s on a ThunderX2 arm64 server.
[1] https://github.com/kata-containers/runtime/issues/1917
Reported-by: Ning Bo <n.b@live.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
A userspace process holding a file descriptor to a virtio_blk device can
still invoke block_device_operations after hot unplug. This leads to a
use-after-free accessing vblk->vdev in virtblk_getgeo() when
ioctl(HDIO_GETGEO) is invoked:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
PGD 800000003a92f067 PUD 3a930067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246
RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
[<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
[<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
[<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
[<ffffffff8d488771>] block_ioctl+0x41/0x50
[<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
[<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0
A related problem is that virtblk_remove() leaks the vd_index_ida index
when something still holds a reference to vblk->disk during hot unplug.
This causes virtio-blk device names to be lost (vda, vdb, etc).
Fix these issues by protecting vblk->vdev with a mutex and reference
counting vblk so the vd_index_ida index can be removed in all cases.
Fixes: 48e4043d4529 ("virtio: add virtio disk geometry feature")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Pull VFIO fixes from Alex Williamson:
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
- Fix a potential math overflow (Yan Zhao)
- Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
vfio: checking of validity of user vaddr in vfio_dma_rw
|
|
Pull block fixes from Jens Axboe:
"A few fixes for this release:
- NVMe pull request from Christoph, with a single fix for a double
free in the namespace error handling.
- Kill the bd_openers check in blk_drop_partitions(), fixing a
regression in this merge window (Christoph)"
* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes, and two reverts because the original patches
revealed underlying problems which the Tegra guys are now working on"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Avoid i2c interrupt status clear race condition.
i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
Revert "i2c: tegra: Synchronize DMA before termination"
i2c: iproc: generate stop event for slave writes
|
|
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes for graphics. Nothing to extreme bunch of
amdgpu fixes, i915 and qxl fixes, along with some misc ones.
All seems to be progressing normally.
core:
- EDID off by one DTD fix
- DP mst write return code fix
dma-buf:
- fix SET_NAME ioctl uapi
- doc fixes
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
- (uapi) Add additional DCC tiling flags for navi1x
i915:
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is
valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
qxl:
- use after gree fix
- fix lost kunmap
- release leak fix
virtio:
- context destruction fix"
* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
dma-buf: fix documentation build warnings
drm/qxl: qxl_release use after free
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/i915: Use proper fault mask in interrupt postinstall too
drm/amd/display: Use cursor locking to prevent flip delays
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
drm/amd/display: fix rn soc bb update
drm/amd/display: check if REFCLK_CNTL register is present
drm/amdgpu: bump version for invalidate L2 before SDMA IBs
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
drm/amdgpu: add tiling flags from Mesa
drm/amd/powerplay: avoid using pm_en before it is initialized revised
Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/virtio: only destroy created contexts
drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
drm/i915/gt: Check cacheline is valid before acquiring
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four minor fixes: three in drivers and one in the core.
The core one allows an additional state change that fixes a regression
introduced by an update to the aacraid driver in the previous merge
window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target/iblock: fix WRITE SAME zeroing
scsi: qla2xxx: check UNLOADING before posting async work
scsi: qla2xxx: set UNLOADING before waiting for session deletion
scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK
|
|
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In commit a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev(). That export should
also be _GPL like the others.
Fixes: a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The CONFIG_ prefix should be added in the code.
Fixes: 046182525db61 ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode")
Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.
Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.
Fixes: 3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.7-2020-04-29:
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV
- SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
UAPI:
- Add additional DCC tiling flags for navi1x
Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4697
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429212008.4306-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430140042.GA270140@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A few resources-related fixes for qxl, some doc build warnings and ioctl
fixes for dma-buf, an off-by-one fix in edid, and a return code fix in
DP-MST
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153201.wx6of2b2gsoip7bk@gilmour.lan
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Document DM integrity allow_discard feature that was added during 5.7
merge window.
- Fix potential for DM writecache data corruption during DM table
reloads.
- Fix DM verity's FEC support's hash block number calculation in
verity_fec_decode().
- Fix bio-based DM multipath crash due to use of stale copy of
MPATHF_QUEUE_IO flag state in __map_bio().
* tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
dm verity fec: fix hash block number in verity_fec_decode
dm writecache: fix data corruption when reloading the target
dm integrity: document allow_discard option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- meson-mx-sdio: Fix support for HW busy detection
- sdhci-msm: Fix support for HW busy detection
- cqhci: Fix polling loop by converting to readx_poll_timeout()
- sdhci-xenon: Fix annoying 1.8V regulator warning
- sdhci-pci: Fix eMMC driver strength for BYT-based controllers
* tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers
mmc: sdhci-xenon: fix annoying 1.8V regulator warning
mmc: sdhci-msm: Enable host capabilities pertains to R1b response
mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop
mmc: meson-mx-sdio: remove the broken ->card_busy() op
mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY
mmc: core: make mmc_interrupt_hpi() static
|
|
Fix documentation warnings in dma-buf.[hc]:
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach'
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach'
../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
|
|
In AST2600 there have a slow peripheral bus between CPU and i2c
controller. Therefore GIC i2c interrupt status clear have delay timing,
when CPU issue write clear i2c controller interrupt status. To avoid
this issue, the driver need have read after write clear at i2c ISR.
Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[wsa: added Fixes tag]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The problem is that we dereference "privdata->pci_dev" when we print
the error messages in amd_mp2_pci_init():
dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n");
^^^^^^^^^^^^^^^^^
Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Without gpiolib, this driver fails to link:
arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe':
hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data'
arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get':
hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data'
Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.
More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.html
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The state of the center button was not reported to userspace for the
2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling
code not being updated to support its reduced number of buttons. This
patch uses the actual number of buttons present on the tablet to
assemble a button state bitmap.
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112
Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes.
Specifically:
- fix linker argument to allow linking with lld
- build fix for configurations without a frame pointer
- a handful of build fixes related the SBI 0.1 vs 0.2 split
- remove STRICT_KERNEL_RWX for !MMU, which isn't useful"
* tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU
riscv: sbi: Fix undefined reference to sbi_shutdown
tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI
riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export
riscv: fix vdso build with lld
RISC-V: stacktrace: Declare sp_in_global outside ifdef
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a bunch of bugs detected by KASAN in the caam driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix the address of the last entry of S/G
crypto: caam - fix use-after-free KASAN issue for RSA algorithms
crypto: caam - fix use-after-free KASAN issue for HASH algorithms
crypto: caam - fix use-after-free KASAN issue for AEAD algorithms
crypto: caam - fix use-after-free KASAN issue for SKCIPHER algorithms
|
|
The syzbot fuzzer discovered a bad race between in the usbhid driver
between usbhid_stop() and usbhid_close(). In particular,
usbhid_stop() does:
usb_free_urb(usbhid->urbin);
...
usbhid->urbin = NULL; /* don't mess up next start */
and usbhid_close() does:
usb_kill_urb(usbhid->urbin);
with no mutual exclusion. If the two routines happen to run
concurrently so that usb_kill_urb() is called in between the
usb_free_urb() and the NULL assignment, it will access the
deallocated urb structure -- a use-after-free bug.
This patch adds a mutex to the usbhid private structure and uses it to
enforce mutual exclusion of the usbhid_start(), usbhid_stop(),
usbhid_open() and usbhid_close() callbacks.
Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
configurations, its presence makes arch/powerpc/kvm/Makefile to select
modules which do not build in such configuration.
The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
#define _PAGE_EXEC 0x00001 /* execute permission */
In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
from arch/powerpc/include/asm/book3s/pgtable.h:8,
from arch/powerpc/include/asm/pgtable.h:18,
from include/linux/mm.h:95,
from arch/powerpc/include/asm/io.h:29,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from arch/powerpc/include/asm/hardirq.h:6,
from include/linux/hardirq.h:9,
from include/linux/kvm_host.h:7,
from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
#define _PAGE_EXEC 0x200 /* software: exec allowed */
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200414142630.21153-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config):
drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap':
dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot'
IOMMU_DMA must not be selected, unless HAS_DMA=y.
Hence fix this by making MTK_IOMMU depend on HAS_DMA.
While at it, remove the dependency on ARM || ARM64, as that is already
implied by the dependency on ARCH_MEDIATEK.
Fixes: e93a1695d7fb5513 ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200410143047.19691-1-geert@linux-m68k.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In iommu_probe_device(), we would invoke dev_iommu_free() to free the
dev->iommu after the ->add_device() returns failure. But after commit
72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu"), we also
need to free the iommu_fwspec before the dev->iommu is freed. This fixes
the following memory leak reported by kmemleak:
unreferenced object 0xffff000bc836c700 (size 128):
comm "swapper/0", pid 1, jiffies 4294896304 (age 782.120s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 d8 cd 9b ff 0b 00 ff ff ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000df34077b>] kmem_cache_alloc_trace+0x244/0x4b0
[<000000000e560ac0>] iommu_fwspec_init+0x7c/0xb0
[<0000000075eda275>] of_iommu_xlate+0x80/0xe8
[<00000000728d6bf9>] of_pci_iommu_init+0xb0/0xb8
[<00000000d001fe6f>] pci_for_each_dma_alias+0x48/0x190
[<000000006db6bbce>] of_iommu_configure+0x1ac/0x1d0
[<00000000634745f8>] of_dma_configure+0xdc/0x220
[<000000002cbc8ba0>] pci_dma_configure+0x50/0x78
[<00000000cdf6e193>] really_probe+0x8c/0x340
[<00000000fddddc46>] driver_probe_device+0x60/0xf8
[<0000000061bcdb51>] __device_attach_driver+0x8c/0xd0
[<000000009b9ff58e>] bus_for_each_drv+0x80/0xd0
[<000000004b9c8aa3>] __device_attach+0xec/0x148
[<00000000a5c13bf3>] device_attach+0x1c/0x28
[<000000005071e151>] pci_bus_add_device+0x58/0xd0
[<000000002d4f87d1>] pci_bus_add_devices+0x40/0x90
Fixes: 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20200402143749.40500-1-haokexin@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
qxl_release should not be accesses after qxl_push_*_ring_release() calls:
userspace driver can process submitted command quickly, move qxl_release
into release_ring, generate interrupt and trigger garbage collector.
It can lead to crashes in qxl driver or trigger memory corruption
in some kmalloc-192 slab object
Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() +
qxl_push_{cursor,command}_ring_release() calls to close that race window.
cc: stable@vger.kernel.org
Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
v2: removed TODO reminder
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When adding devices that don't have a scsi_dh on a BIO based multipath,
I was able to consistently hit the warning below and lock-up the system.
The problem is that __map_bio reads the flag before it potentially being
modified by choose_pgpath, and ends up using the older value.
The WARN_ON below is not trivially linked to the issue. It goes like
this: The activate_path delayed_work is not initialized for non-scsi_dh
devices, but we always set MPATHF_QUEUE_IO, asking for initialization.
That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath.
Nevertheless, only for BIO-based mpath, we cache the flag before calling
choose_pgpath, and use the older version when deciding if we should
initialize the path. Therefore, we end up trying to initialize the
paths, and calling the non-initialized activate_path work.
[ 82.437100] ------------[ cut here ]------------
[ 82.437659] WARNING: CPU: 3 PID: 602 at kernel/workqueue.c:1624
__queue_delayed_work+0x71/0x90
[ 82.438436] Modules linked in:
[ 82.438911] CPU: 3 PID: 602 Comm: systemd-udevd Not tainted 5.6.0-rc6+ #339
[ 82.439680] RIP: 0010:__queue_delayed_work+0x71/0x90
[ 82.440287] Code: c1 48 89 4a 50 81 ff 00 02 00 00 75 2a 4c 89 cf e9
94 d6 07 00 e9 7f e9 ff ff 0f 0b eb c7 0f 0b 48 81 7a 58 40 74 a8 94 74
a7 <0f> 0b 48 83 7a 48 00 74 a5 0f 0b eb a1 89 fe 4c 89 cf e9 c8 c4 07
[ 82.441719] RSP: 0018:ffffb738803977c0 EFLAGS: 00010007
[ 82.442121] RAX: ffffa086389f9740 RBX: 0000000000000002 RCX: 0000000000000000
[ 82.442718] RDX: ffffa086350dd930 RSI: ffffa0863d76f600 RDI: 0000000000000200
[ 82.443484] RBP: 0000000000000200 R08: 0000000000000000 R09: ffffa086350dd970
[ 82.444128] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa086350dd930
[ 82.444773] R13: ffffa0863d76f600 R14: 0000000000000000 R15: ffffa08636738008
[ 82.445427] FS: 00007f6abfe9dd40(0000) GS:ffffa0863dd80000(0000) knlGS:00000
[ 82.446040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 82.446478] CR2: 0000557d288db4e8 CR3: 0000000078b36000 CR4: 00000000000006e0
[ 82.447104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 82.447561] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 82.448012] Call Trace:
[ 82.448164] queue_delayed_work_on+0x6d/0x80
[ 82.448472] __pg_init_all_paths+0x7b/0xf0
[ 82.448714] pg_init_all_paths+0x26/0x40
[ 82.448980] __multipath_map_bio.isra.0+0x84/0x210
[ 82.449267] __map_bio+0x3c/0x1f0
[ 82.449468] __split_and_process_non_flush+0x14a/0x1b0
[ 82.449775] __split_and_process_bio+0xde/0x340
[ 82.450045] ? dm_get_live_table+0x5/0xb0
[ 82.450278] dm_process_bio+0x98/0x290
[ 82.450518] dm_make_request+0x54/0x120
[ 82.450778] generic_make_request+0xd2/0x3e0
[ 82.451038] ? submit_bio+0x3c/0x150
[ 82.451278] submit_bio+0x3c/0x150
[ 82.451492] mpage_readpages+0x129/0x160
[ 82.451756] ? bdev_evict_inode+0x1d0/0x1d0
[ 82.452033] read_pages+0x72/0x170
[ 82.452260] __do_page_cache_readahead+0x1ba/0x1d0
[ 82.452624] force_page_cache_readahead+0x96/0x110
[ 82.452903] generic_file_read_iter+0x84f/0xae0
[ 82.453192] ? __seccomp_filter+0x7c/0x670
[ 82.453547] new_sync_read+0x10e/0x190
[ 82.453883] vfs_read+0x9d/0x150
[ 82.454172] ksys_read+0x65/0xe0
[ 82.454466] do_syscall_64+0x4e/0x210
[ 82.454828] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
[ 82.462501] ---[ end trace bb39975e9cf45daa ]---
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The IRQ postinstall handling had open-coded pipe fault mask selection
that never got updated for gen11. Switch it to use
gen8_de_pipe_fault_mask() to ensure we don't miss updates for new
platforms.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: d506a65d56fd ("drm/i915: Catch GTT fault errors for gen11+ planes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424231423.4065231-1-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 869129ee0c624a78c74e50b51635e183196cd2c6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[Why]
Current locking scheme for cursor can result in a flip missing
its vsync, deferring it for one or more vsyncs. Result is a
potential for stuttering when cursor is moved.
[How]
Use cursor update lock so that flips are not blocked while cursor
is being programmed.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.
[HOW]
Update the value in dcn21_resource to match the spreadsheet.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Fixes the following scenario:
- Flip has been prepared sometime during the frame, update pending
- Cursor update happens right when VUPDATE would happen
- OPTC lock acquired, VUPDATE is blocked until next frame
- Flip is delayed potentially infinitely
With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can
observe nearly *13* frames of delay for some flips on Navi.
[How]
Apply the Raven workaround generically. When close enough to VUPDATE
block cursor updates from occurring from the dc_stream_set_cursor_*
helpers.
This could perhaps be a little smarter by checking if there were
pending updates or flips earlier in the frame on the HUBP side before
applying the delay, but this should be fine for now.
This fixes the kms_cursor_legacy test.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently RN SOC bounding box update assumes we will get at least
2 clock states from SMU. This isn't always true and because of special
casing on first clock state we end up with low disp, dpp, dsc and phy
clocks.
This change removes the special casing allowing the first state to
acquire correct clocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check before programming the register since it isn't present on
all IPs using this code.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A couple of regressions were found in rc1, as well as another set of
races and bugs:
- A regression where RDMA_CM_EVENT_REJECTED was lost in some cases
- Bad error handling in the CM, uverbs, rvt, siw and i40iw
- Kernel stack memory leak to user space in mlx4
- Missing data in a uapi query for mlx5
- Three races found by syzkaller in the ib core code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix race between destroy and release FD object
IB/rdmavt: Always return ERR_PTR from rvt_create_mmap_info()
RDMA/core: Fix overwriting of uobj in case of error
RDMA/core: Prevent mixed use of FDs between shared ufiles
RDMA/uverbs: Fix a race with disassociate and exit_mmap()
RDMA/mlx5: Set GRH fields in query QP on RoCE
RDMA/siw: Fix potential siw_mem refcnt leak in siw_fastreg_mr()
RDMA/mlx4: Initialize ib_spec on the stack
RDMA/cm: Fix an error check in cm_alloc_id_priv()
RDMA/cm: Fix missing RDMA_CM_EVENT_REJECTED event after receiving REJ message
i40iw: fix null pointer dereference on a null wqe pointer
|
|
This fixes GPU hangs due to cache coherency issues.
Bump the driver version. Split out from the original patch.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes GPU hangs due to cache coherency issues.
v2: Split the version bump to a separate patch
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
hwmgr->pm_en is initialized at hwmgr_hw_init.
during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)
pm_en is used in the above two cases while it has not yet been initialized
So avoid using pm_en in the above two functions for V320 passthrough.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit c5207876232649ca5e5ddd6f966d2da75ffded8f.
The commit being reverted changed the wrong place, it should have
changed in func get_asic_baco_capability.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
