| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.
This patch adds freeing dev and info after com20020_config()
fails to fix this bug.
Compile tested only.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix possible race condition in macsec extended packet number update routine
net/mlx5e: Fix MACsec update SecY
net/mlx5e: Fix MACsec SA initialization routine
net/mlx5e: Remove leftovers from old XSK queues enumeration
net/mlx5e: Offload rule only when all encaps are valid
net/mlx5e: Fix missing alignment in size of MTT/KLM entries
net/mlx5: Fix sync reset event handler error flow
net/mlx5: E-Switch, Set correctly vport destination
net/mlx5: Lag, avoid lockdep warnings
net/mlx5: Fix handling of entry refcount when command is not issued to FW
net/mlx5: cmdif, Print info on any firmware cmd failure to tracepoint
net/mlx5: SF: Fix probing active SFs during driver probe phase
net/mlx5: Fix FW tracer timestamp calculation
net/mlx5: Do not query pci info while pci disabled
====================
Link: https://lore.kernel.org/r/20221122022559.89459-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_ppe_init(), when dmam_alloc_coherent() or devm_kzalloc() failed,
the rhashtable ppe->l2_flows isn't destroyed. Fix it.
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() or
register_netdev() failed, have the same problem. Fix it.
Fixes: 33fc42de3327 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() failed,
mtk_mdio_cleanup() isn't called. Fix it.
Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fail to dma_map_single() in mtk_rx_alloc(), it returns directly.
But the memory allocated for local variable data is not freed, and
local variabel data has not been attached to ring->data[i] yet, so the
memory allocated for local variable data will not be freed outside
mtk_rx_alloc() too. Thus memory leak would occur in this scenario.
Add skb_free_frag(data) when dma_map_single() failed.
Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Link: https://lore.kernel.org/r/20221120035405.1464341-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In of_fwnode_get_reference_args(), the refcount of of_args.np has
been incremented in the case of successful return from
of_parse_phandle_with_args() or of_parse_phandle_with_fixed_args().
Decrement the refcount if of_args is not returned to the caller of
of_fwnode_get_reference_args().
Fixes: 3e3119d3088f ("device property: Introduce fwnode_property_get_reference_args")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221121023209.3909759-1-yangyingliang@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We face some regressions on a few IXP42x systems when
accessing flash, the following unrelated error prints
appear from the PCI driver:
ixp4xx-pci c0000000.pci: PCI: abort_handler addr = 0xff9ffb5f,
isr = 0x0, status = 0x22a0
ixp4xx-pci c0000000.pci: imprecise abort
(...)
It turns out that while bit 7 is masked "reserved" it is
not unused, so masking it off as zero is dangerous, and
breaks flash access on some systems such as the NSLU2.
Be more careful and avoid masking off any of the reserved
bits 7, 8, 9 or 30. Only keep masking EXP_WORD (bit 2)
on IXP43x which is necessary in some setups.
Fixes: 1c953bda90ca ("bus: ixp4xx: Add a driver for IXP4xx expansion bus")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221122134411.2030372-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
init
MSR_AMD_PERF_CTL is guaranteed to be 0 on a cold boot. However, on a
kexec boot, for instance, it may have a non-zero value (if the cpu was
in a non-P0 Pstate). In such cases, the cores with non-P0 Pstates at
boot will never be pushed to P0, let alone boost frequencies.
Kexec is a common workflow for reboot on Linux and this creates a
regression in performance. Fix it by explicitly setting the
MSR_AMD_PERF_CTL to 0 during amd_pstate driver init.
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The blamed commit introduced the following smatch warning in the
function lan9662_otp_wait_flag_clear:
drivers/nvmem/lan9662-otpc.c:43 lan9662_otp_wait_flag_clear() warn: signedness bug returning '(-110)'
Fix this by changing the return type of the function
lan9662_otp_wait_flag_clear() to be int instead of bool.
Fixes: 9e8f208ad5229d ("nvmem: lan9662-otp: add support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of error, the function memremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
"3rd set of IIO fixes for the 6.1 cycle.
Usual mixed bunch of driver fixes.
* sw-triggers
- Fix failure to cleanup up list registration in an error path.
* aspeed,adc
- Drop the trim valid dts property as it doesn't account for unprogrammed
OTP and that can be easily detected without it.
* avago,apds9960:
- Fix register address for gesture gain.
* bosch,bma400
- Fix a memory leak in an error path.
* rohm,rpr0521
- Fix missing dependency on IIO_BUFFER/IIO_TRIGGERED_BUFFER.
* ti,afe4403/4404
- Fix out of band read by moving reads down to where they are
used."
* tag 'iio-fixes-for-6.1c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into work-linus
Xu writes:
FPGA Manager changes for 6.1-final
Intel m10 bmc secure update
- Russ's change fixes Kconfig dependencies
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-6.1 branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: Fix kconfig dependencies
|
|
Patch modifies the TD_SIZE in TRB before ZLP TRB.
The TD_SIZE in TRB before ZLP TRB must be set to 1 to force
processing ZLP TRB by controller.
cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20221115092218.421267-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Until the endpoint is disabled, its descriptors should remain valid.
When its requests are removed from ep disable, the request completion
routine may attempt to access the endpoint's descriptor. Don't clear the
descriptors before that.
Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/45db7c83b209259115bf652af210f8b2b3b1a383.1668561364.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The core DWC3 device node was not properly removed by the custom
dwc3_exynos_remove_child() function. Replace it with generic
of_platform_depopulate() which does that job right.
Fixes: adcf20dcd262 ("usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221110154131.2577-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During handling Clear Halt Endpoint Feature request, driver invokes
Reset Endpoint command. Because this command has some issue with
transition endpoint from Running to Idle state the driver must
stop the endpoint by using Stop Endpoint command.
cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20221110063005.370656-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If there's a disconnection while operating in eSS, there may be a delay
in VBUS drop response from the connector. In that case, the internal
link state may drop to operate in usb2 speed while the controller thinks
the VBUS is still high. The driver must make sure to disable
GUSB2PHYCFG.SUSPHY when sending endpoint command while in usb2 speed.
The End Transfer command may be called, and only that command needs to
go through at this point. Let's keep it simple and unconditionally
disable GUSB2PHYCFG.SUSPHY whenever we issue the command.
This scenario is not seen in real hardware. In a rare case, our
prototype type-c controller/interface may have a slow response
triggerring this issue.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/5651117207803c26e2f22ddf4e5ce9e865dcf7c7.1668045468.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since e219a712bc06 (usb: gadget: uvc: add v4l2 try_format api call) the
try_format function is available. With this function includes checks for
valid configurations programmed in the configfs. We use this function to
ensure to return valid values on the set_format callback.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Fixes: e219a712bc06 ("usb: gadget: uvc: add v4l2 try_format api call")
Link: https://lore.kernel.org/r/20221026182240.363055-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A kernel built with syzbot's config file reported that
scr_memcpyw(q, save, array3_size(logo_lines, new_cols, 2))
causes uninitialized "save" to be copied.
----------
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
=====================================================
BUG: KMSAN: uninit-value in do_update_region+0x4b8/0xba0
do_update_region+0x4b8/0xba0
update_region+0x40d/0x840
fbcon_switch+0x3364/0x35e0
redraw_screen+0xae3/0x18a0
do_bind_con_driver+0x1cb3/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
Uninit was stored to memory at:
fbcon_prepare_logo+0x143b/0x1940
fbcon_init+0x2c1b/0x31c0
visual_init+0x3e7/0x820
do_bind_con_driver+0x14a4/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
Uninit was created at:
__kmem_cache_alloc_node+0xb69/0x1020
__kmalloc+0x379/0x680
fbcon_prepare_logo+0x704/0x1940
fbcon_init+0x2c1b/0x31c0
visual_init+0x3e7/0x820
do_bind_con_driver+0x14a4/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc4-00356-g8f2975c2bb4c #924
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
----------
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cad03d25-0ea0-32c4-8173-fd1895314bce@I-love.SAKURA.ne.jp
|
|
If PTP synchronisation is done every second, then sporadic the interval
is higher than one second:
ptp4l[696.582]: master offset -17 s2 freq -1891 path delay 573
ptp4l[697.582]: master offset -22 s2 freq -1901 path delay 573
ptp4l[699.368]: master offset -1 s2 freq -1887 path delay 573
^^^^^^^ Should be 698.582!
This problem is caused by rotten packets, which are received after
polling but before interrupts are enabled again. This can be fixed by
checking for pending work and rescheduling if necessary after interrupts
has been enabled again.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Racing conflict could be:
task A task B
list_for_each_entry
strcmp(h->name))
list_for_each_entry
strcmp(h->name)
kzalloc kzalloc
...... .....
device_create device_create
list_add
list_add
The root cause is that task B has no idea about the fact someone
else(A) has inserted heap with same name when it calls list_add,
so a potential collision occurs.
Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/TYCP286MB2323873BBDF88020781FB986CA3B9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
|
|
Commit 4581dd480c9e ("net: octeontx2-pf: mcs: consider MACSEC setting")
has already added "depends on MACSEC || !MACSEC", so remove it.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221119133616.3583538-1-zhengbin13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.
Fixes: b56e9670ffa4 ("bnx2x: Prepare device and initialize VF database")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Status is reported as always off in the 6032 case. Status
reporting now matches the logic in the setters. Once of
the differences to the 6030 is that there are no groups,
therefore the state needs to be read out in the lower bits.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221120221208.3093727-3-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In former times, info->feature was populated via the parent driver
by pdata/regulator_init_data->driver_data for all regulators when
USB_PRODUCT_ID_LSB indicates a TWL6032.
Today, the information is not set, so re-add it at the regulator
definitions.
Fixes: 25d82337705e2 ("regulator: twl: make driver DT only")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221120221208.3093727-2-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __ef100_hard_start_xmit() returns NETDEV_TX_OK without freeing skb
in error handling case, add dev_kfree_skb_any() to fix it.
Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668671409-10909-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().
Fixes: d38a648d2d6c ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
drm-intel-fixes
gvt-fixes-2022-11-11
- kvm reference fix from Sean
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111090208.GQ30028@zhen-hp.sh.intel.com
|
|
Commit 1229b33973c7 ("ice: Add low latency Tx timestamp read") refactored
PTP timestamping logic to use a threaded IRQ instead of a separate kthread.
This implementation introduced ice_misc_intr_thread_fn and redefined the
ice_ptp_process_ts function interface to return a value of whether or not
the timestamp processing was complete.
ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts
and convert it into either IRQ_HANDLED if there were no more timestamps to
be processed, or IRQ_WAKE_THREAD if the thread should continue processing.
This is not correct, as the kernel does not re-schedule threaded IRQ
functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ
function.
This results in the ice_ptp_process_ts function (and in turn the
ice_ptp_tx_tstamp function) from only being called exactly once per
interrupt.
If an application sends a burst of Tx timestamps without waiting for a
response, the interrupt will trigger for the first timestamp. However,
later timestamps may not have arrived yet. This can result in dropped or
discarded timestamps. Worse, on E822 hardware this results in the interrupt
logic getting stuck such that no future interrupts will be triggered. The
result is complete loss of Tx timestamp functionality.
Fix this by modifying the ice_misc_intr_thread_fn to perform its own
polling of the ice_ptp_process_ts function. We sleep for a few microseconds
between attempts to avoid wasting significant CPU time. The value was
chosen to allow time for the Tx timestamps to complete without wasting so
much time that we overrun application wait budgets in the worst case.
The ice_ptp_process_ts function also currently returns false in the event
that the Tx tracker is not initialized. This would result in the threaded
IRQ handler never exiting if it gets started while the tracker is not
initialized.
Fix the function to appropriately return true when the tracker is not
initialized.
Note that this will not reproduce with default ptp4l behavior, as the
program always synchronously waits for a timestamp response before sending
another timestamp request.
Reported-by: Siddaraju DH <siddaraju.dh@intel.com>
Fixes: 1229b33973c7 ("ice: Add low latency Tx timestamp read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-18 (iavf)
Ivan Vecera resolves issues related to reset by adding back call to
netif_tx_stop_all_queues() and adding calls to dev_close() to ensure
device is properly closed during reset.
Stefan Assmann removes waiting for setting of MAC address as this breaks
ARP.
Slawomir adds setting of __IAVF_IN_REMOVE_TASK bit to prevent deadlock
between remove and shutdown.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix race condition between iavf_shutdown and iavf_remove
iavf: remove INITIAL_MAC_SET to allow gARP to work properly
iavf: Do not restart Tx queues after reset task failure
iavf: Fix a crash during reset task
====================
Link: https://lore.kernel.org/r/20221118222439.1565245-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the ccr read error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
update routine
Currenty extended packet number (EPN) update routine is accessing
macsec object without holding the general macsec lock hence facing
a possible race condition when an EPN update occurs while updating
or deleting the SA.
Fix by holding the general macsec lock before accessing the object.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently updating SecY destroys and re-creates RX SA objects,
the re-created RX SA objects are not identical to the destroyed
objects and it disagree on the encryption enabled property which
holds the value false after recreation, this value is not
supported with offload which leads to no traffic after an update.
Fix by recreating an identical objects.
Fixes: 5a39816a75e5 ("net/mlx5e: Add MACsec offload SecY support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently as part of MACsec SA initialization routine
extended packet number (EPN) object attribute is always
being set without checking if EPN is actually enabled,
the above could lead to a NULL dereference.
Fix by adding such a check.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before the cited commit, for N channels, a dedicated set of N queues was
created to support XSK, in indices [N, 2N-1], doubling the number of
queues.
In addition, changing the number of channels was prohibited, as it would
shift the indices.
Remove these two leftovers, as we moved XSK to a new queueing scheme,
starting from index 0.
Fixes: 3db4c85cde7a ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit adds a for loop to support multiple encapsulations.
But it only checks if the last encap is valid.
Fix it by setting slow path flag when one of the encap is invalid.
Fixes: f493f15534ec ("net/mlx5e: Move flow attr reformat action bit to per dest flags")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the cited patch, an alignment required by the HW spec was mistakenly
dropped. Bring it back to fix error completions like the below:
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x40b, ci 0x0, qn 0x104f, opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 86 00 68 02 25 00 10 4f 00 00 bb d2
WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 192
00000000: 00 00 00 25 00 10 4f 0c 00 00 00 00 00 18 2e 00
00000010: 90 00 00 00 00 02 00 00 00 00 00 00 20 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000080: 08 00 00 00 48 6a 00 02 08 00 00 00 0e 10 00 02
00000090: 08 00 00 00 0c db 00 02 08 00 00 00 0e 82 00 02
000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes: 9f123f740428 ("net/mlx5e: Improve MTT/KSM alignment")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When sync reset now event handling fails on mlx5_pci_link_toggle() then
no reset was done. However, since mlx5_cmd_fast_teardown_hca() was
already done, the firmware function is closed and the driver is left
without firmware functionality.
Fix it by setting device error state and reopen the firmware resources.
Reopening is done by the thread that was called for devlink reload
fw_activate as it already holds the devlink lock.
Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit moved from using reformat_id integer to packet_reformat
pointer which introduced the possibility to null pointer dereference.
When setting packet reformat flag and pkt_reformat pointer must
exists so checking MLX5_ESW_DEST_ENCAP is not enough, we need
to make sure the pkt_reformat is valid and check for MLX5_ESW_DEST_ENCAP_VALID.
If the dest encap valid flag does not exists then pkt_reformat can be
either invalid address or null.
Also, to make sure we don't try to access invalid pkt_reformat set it to
null when invalidated and invalidate it before calling add flow code as
its logically more correct and to be safe.
Fixes: 2b688ea5efde ("net/mlx5: Add flow steering actions to fs_cmd shim layer")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ldev->lock is used to serialize lag change operations. Since multiport
eswtich functionality was added, we now change the mode dynamically.
However, acquiring ldev->lock is not allowed as it could possibly lead
to a deadlock as reported by the lockdep mechanism.
[ 836.154963] WARNING: possible circular locking dependency detected
[ 836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted
[ 836.156549] ------------------------------------------------------
[ 836.157418] handler1/12198 is trying to acquire lock:
[ 836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.159575]
[ 836.159575] but task is already holding lock:
[ 836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 836.161669] which lock already depends on the new lock.
[ 836.162905]
[ 836.162905] the existing dependency chain (in reverse order) is:
[ 836.164008] -> #3 (&block->cb_lock){++++}-{3:3}:
[ 836.164946] down_write+0x25/0x60
[ 836.165548] tcf_block_get_ext+0x1c6/0x5d0
[ 836.166253] ingress_init+0x74/0xa0 [sch_ingress]
[ 836.167028] qdisc_create.constprop.0+0x130/0x5e0
[ 836.167805] tc_modify_qdisc+0x481/0x9f0
[ 836.168490] rtnetlink_rcv_msg+0x16e/0x5a0
[ 836.169189] netlink_rcv_skb+0x4e/0xf0
[ 836.169861] netlink_unicast+0x190/0x250
[ 836.170543] netlink_sendmsg+0x243/0x4b0
[ 836.171226] sock_sendmsg+0x33/0x40
[ 836.171860] ____sys_sendmsg+0x1d1/0x1f0
[ 836.172535] ___sys_sendmsg+0xab/0xf0
[ 836.173183] __sys_sendmsg+0x51/0x90
[ 836.173836] do_syscall_64+0x3d/0x90
[ 836.174471] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.175282]
[ 836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}:
[ 836.176190] __mutex_lock+0x6b/0xf80
[ 836.176830] register_netdevice_notifier+0x21/0x120
[ 836.177631] rtnetlink_init+0x2d/0x1e9
[ 836.178289] netlink_proto_init+0x163/0x179
[ 836.178994] do_one_initcall+0x63/0x300
[ 836.179672] kernel_init_freeable+0x2cb/0x31b
[ 836.180403] kernel_init+0x17/0x140
[ 836.181035] ret_from_fork+0x1f/0x30
[ 836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}:
[ 836.182628] down_write+0x25/0x60
[ 836.183235] unregister_netdevice_notifier+0x1c/0xb0
[ 836.184029] mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib]
[ 836.184855] __mlx5_ib_remove+0x35/0x60 [mlx5_ib]
[ 836.185637] mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core]
[ 836.186698] auxiliary_bus_remove+0x18/0x30
[ 836.187409] device_release_driver_internal+0x1f6/0x270
[ 836.188253] bus_remove_device+0xef/0x160
[ 836.188939] device_del+0x18b/0x3f0
[ 836.189562] mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core]
[ 836.190516] mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core]
[ 836.191414] mlx5_do_bond_work+0x441/0x620 [mlx5_core]
[ 836.192278] process_one_work+0x25c/0x590
[ 836.192963] worker_thread+0x4f/0x3d0
[ 836.193609] kthread+0xcb/0xf0
[ 836.194189] ret_from_fork+0x1f/0x30
[ 836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}:
[ 836.195734] __lock_acquire+0x15b8/0x2a10
[ 836.196426] lock_acquire+0xce/0x2d0
[ 836.197057] __mutex_lock+0x6b/0xf80
[ 836.197708] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.198575] tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[ 836.199467] parse_tc_actions+0x168/0x5a0 [mlx5_core]
[ 836.200340] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[ 836.201241] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[ 836.202187] tc_setup_cb_add+0xd7/0x200
[ 836.202856] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 836.203739] fl_change+0xbbe/0x1730 [cls_flower]
[ 836.204501] tc_new_tfilter+0x407/0xd90
[ 836.205168] rtnetlink_rcv_msg+0x406/0x5a0
[ 836.205877] netlink_rcv_skb+0x4e/0xf0
[ 836.206535] netlink_unicast+0x190/0x250
[ 836.207217] netlink_sendmsg+0x243/0x4b0
[ 836.207915] sock_sendmsg+0x33/0x40
[ 836.208538] ____sys_sendmsg+0x1d1/0x1f0
[ 836.209219] ___sys_sendmsg+0xab/0xf0
[ 836.209878] __sys_sendmsg+0x51/0x90
[ 836.210510] do_syscall_64+0x3d/0x90
[ 836.211137] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.211954] other info that might help us debug this:
[ 836.213174] Chain exists of:
[ 836.213174] &ldev->lock --> rtnl_mutex --> &block->cb_lock
836.214650] Possible unsafe locking scenario:
[ 836.214650]
[ 836.215574] CPU0 CPU1
[ 836.216255] ---- ----
[ 836.216943] lock(&block->cb_lock);
[ 836.217518] lock(rtnl_mutex);
[ 836.218348] lock(&block->cb_lock);
[ 836.219212] lock(&ldev->lock);
[ 836.219758]
[ 836.219758] *** DEADLOCK ***
[ 836.219758]
[ 836.220747] 2 locks held by handler1/12198:
[ 836.221390] #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 836.222646] #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[ 836.224063] stack backtrace:
[ 836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1
[ 836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 836.227476] Call Trace:
[ 836.227929] <TASK>
[ 836.228332] dump_stack_lvl+0x57/0x7d
[ 836.228924] check_noncircular+0x104/0x120
[ 836.229562] __lock_acquire+0x15b8/0x2a10
[ 836.230201] lock_acquire+0xce/0x2d0
[ 836.230776] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.231614] ? find_held_lock+0x2b/0x80
[ 836.232221] __mutex_lock+0x6b/0xf80
[ 836.232799] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.233636] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.234451] ? xa_load+0xc3/0x190
[ 836.234995] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.235803] tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[ 836.236636] ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core]
[ 836.237550] parse_tc_actions+0x168/0x5a0 [mlx5_core]
[ 836.238364] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[ 836.239202] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[ 836.240076] ? lock_acquire+0xce/0x2d0
[ 836.240668] ? tc_setup_cb_add+0x5b/0x200
[ 836.241294] tc_setup_cb_add+0xd7/0x200
[ 836.241917] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 836.242709] fl_change+0xbbe/0x1730 [cls_flower]
[ 836.243408] tc_new_tfilter+0x407/0xd90
[ 836.244043] ? tc_del_tfilter+0x880/0x880
[ 836.244672] rtnetlink_rcv_msg+0x406/0x5a0
[ 836.245310] ? netlink_deliver_tap+0x7a/0x4b0
[ 836.245991] ? if_nlmsg_stats_size+0x2b0/0x2b0
[ 836.246675] netlink_rcv_skb+0x4e/0xf0
[ 836.258046] netlink_unicast+0x190/0x250
[ 836.258669] netlink_sendmsg+0x243/0x4b0
[ 836.259288] sock_sendmsg+0x33/0x40
[ 836.259857] ____sys_sendmsg+0x1d1/0x1f0
[ 836.260473] ___sys_sendmsg+0xab/0xf0
[ 836.261064] ? lock_acquire+0xce/0x2d0
[ 836.261669] ? find_held_lock+0x2b/0x80
[ 836.262272] ? __fget_files+0xb9/0x190
[ 836.262871] ? __fget_files+0xd3/0x190
[ 836.263462] __sys_sendmsg+0x51/0x90
[ 836.264064] do_syscall_64+0x3d/0x90
[ 836.264652] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.265425] RIP: 0033:0x7fdbe5e2677d
[ 836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee
ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48
[ 836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d
[ 836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c
[ 836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000
[ 836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860
[ 836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640
[ 836.274521] </TASK>
To avoid using mode holding ldev->lock in the configure flow, we queue a
work to the lag workqueue and cease wait on a completion object.
In addition, we remove the lock from mlx5_lag_do_mirred() since it is
not really protecting anything.
It should be noted that an actual deadlock has not been observed.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case command interface is down, or the command is not allowed, driver
did not increment the entry refcount, but might have decrement as part
of forced completion handling.
Fix that by always increment and decrement the refcount to make it
symmetric for all flows.
Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reported-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
While moving to new CMD API (quiet API), some pre-existing flows may call the new API
function that in case of error, returns the error instead of printing it as previously done.
For such flows we bring back the print but to tracepoint this time for sys admins to
have the ability to check for errors especially for commands using the new quiet API.
Tracepoint output example:
devlink-1333 [001] ..... 822.746922: mlx5_cmd: ACCESS_REG(0x805) op_mod(0x0) failed, status bad resource(0x5), syndrome (0xb06e1f), err(-22)
Fixes: f23519e542e5 ("net/mlx5: cmdif, Add new api for command execution")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When SF devices and SF port representors are located on different
functions, unloading and reloading of SF parent driver doesn't recreate
the existing SF present in the device.
Fix it by querying SFs and probe active SFs during driver probe phase.
Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix a bug in calculation of FW tracer timestamp. Decreasing one in the
calculation should effect only bits 52_7 and not effect bits 6_0 of the
timestamp, otherwise bits 6_0 are always set in this calculation.
Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The driver should not interact with PCI while PCI is disabled. Trying to
do so may result in being unable to get vital signs during PCI reset,
driver gets timed out and fails to recover.
Fixes: fad1783a6d66 ("net/mlx5: Print more info on pci error handlers")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If mes enabled, reserve VM invalidation engine 5 for firmware.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
Allow user to know number of compute units (CU) that are in use at any
given moment. Enable access to the method kgd_gfx_v9_get_cu_occupancy
that computes CU occupancy.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
