summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-04-15b43legacy: fix initvals loading on bcm4303Stefano Brivio1-0/+2
This allows for the correct initial values to be uploaded to bcm4303 devices. It should be correct, but I can't reliably test this as I suspect there's something going wrong with an hardware rfkill switch on my laptop. Please test. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-15rtl8187: Add missing priv->vif assignmentsHerton Ronaldo Krzesinski1-0/+3
This adds missing priv->vif assignments after "mac80211: don't use interface indices in drivers" change. As rtl8180, rtl8187 also needs priv->vif to be set, as without this an oops can happen in rtl8187_tx function (priv->vif is passed to ieee80211_rts_duration). Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-13[ISDN]: Do not validate ISDN net device address prior to interface-upPaul Bolle1-0/+1
Commit bada339 (Validate device addr prior to interface-up) caused a regression in the ISDN network code, see: http://bugzilla.kernel.org/show_bug.cgi?id=9923 The trivial fix is to remove the pointer to eth_validate_addr() in the net_device struct in isdn_net_init(). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12net: check for underlength tap writesRusty Russell1-1/+4
If the user gives a packet under 14 bytes, we'll end up reading off the end of the skb (not oopsing, just reading off the end). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12net: make struct tun_struct private to tun.cRusty Russell1-0/+33
There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12tg3: fix MMIO for PPC 44x platformsSergei Shtylyov1-3/+4
The driver stores the PCI resource addresses into 'unsigned long' variable before calling ioremap_nocache() on them. This warrants kernel oops when the registers are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space mapped beyond 4 GB. The arch/ppc/ kernel has a fixup in ioremap() that creates an illusion that the PCI memory resource is mapped below 4 GB, but arch/powerpc/ code got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled. [ Bump driver version and release date -DaveM ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12Mark generic HDLC + PPP as broken.Krzysztof Halasa1-1/+5
PPP support in generic HDLC in Linux 2.6.25 is broken and will cause a kernel panic when a device configured in PPP mode is activated. It will be replaced by new PPP implementation after Linux 2.6.25 is released. This affects only PPP support in generic HDLC (mostly Hitachi SCA and SCA-II based drivers, wanxl, and few others). Standalone syncppp and async PPP support are not affected. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12ehea: Fix DLPAR memory add supportThomas Klein2-3/+24
This patch fixes two weaknesses in send/receive packet handling which may lead to kernel panics during DLPAR memory add operations. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12sc92031: sysfs link missingStephen Hemminger1-0/+1
Add missing sysfs device association. Compile tested only -ENOHW. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10380 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: <tom@sharkbay.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12smc91x driver: fix bug: print warning only in interrupt modeSonic Zhang1-0/+2
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3956 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12forcedeth: mac address fixAyaz Abdulla1-2/+24
This critical patch fixes a mac address issue recently introduced. If the device's mac address was in correct order and the flag NVREG_TRANSMITPOLL_MAC_ADDR_REV was set, during nv_remove the flag would get cleared. During next load, the mac address would get reversed because the flag is missing. As it has been indicated previously, the flag is cleared across a low power transition. Therefore, the driver should set the mac address back into the reversed order when clearing the flag. Also, the driver should set back the flag after a low power transition to protect against kexec command calling nv_probe a second time. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12macb: Use semicolon instead of comma for statementAtsushi Nemoto1-6/+6
It seems no good reason to use comma here. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12macb: Call phy_disconnect on removingAtsushi Nemoto1-0/+2
Call phy_disconnect() on remove routine. Otherwise the phy timer causes a kernel crash when unloading. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12ucc_geth: fix non-functional fixed phy supportJoakim Tjernlund1-23/+30
The new Fixed PHY method, fixed-link property, isn't impl. for ucc_geth which makes fixed PHYs non functional. Add support for the new method to restore the Fixed PHY functionality. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12fs_enet: Don't call NAPI functions when NAPI is not used.Laurent Pinchart1-1/+2
fs_enet_close() calls napi_disable() unconditionally. This patch skips the call when use_napi isn't set. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12sky2: missing chip name for Yukon SupremeStephen Hemminger1-0/+1
Any usage of sky2 on new Yukon Supreme would cause a NULL dereference. The chip is very new, so the support is still untested; vendor has not sent any eval hardware. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-09BNX2X: Correct bringing chip out of resetEliezer Tamir1-3/+3
Fixed bug: Wrong register was written to when bringing the chip out of reset. [ Bump driver version and release date -DaveM ] Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-09Merge branch 'master' of ↵David S. Miller7-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-04-09rt61pci: rt61pci_beacon_update do not free skb twiceDaniel Wagner1-3/+1
The layer above will free the skb in an error case. Signed-off-by: Daniel Wagner <wagi@monom.org> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09ssb-mipscore: Fix interrupt vectorsMichael Buesch1-6/+7
This fixes assignment of the interrupt vectors on the SSB MIPS core. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09ssb-pcicore: Fix IRQ TPS flag handlingLarry Finger1-1/+1
This fixes the TPS flag handling for the SSB pcicore driver. This fixes interrupts on some devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08[NET]: Undo code bloat in hot paths due to print_mac().David S. Miller7-110/+177
If print_mac() is used inside of a pr_debug() the compiler can't see that the call is redundant so still performs it even of pr_debug() ends up being a nop. So don't use print_mac() in such cases in hot code paths, use MAC_FMT et al. instead. As noted by Joe Perches, pr_debug() could be modified to handle this better, but that is a change to an interface used by the entire kernel and thus needs to be validated carefully. This here is thus the less risky fix for 2.6.25 Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-07b43legacy: fix bcm4303 crashStefano Brivio1-0/+6
This fixes an hard crash which happened upon driver loading on bcm4303 rev. 2 devices. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07iwlwifi: fix n-band association problemAbhijeet Kolekar1-1/+0
This patch enables the IWL4965_HT flag (n-band) in Kconfig. Removed the "depends on n" from Kconfig for config IWL4965_HT Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07ipw2200: set MAC address on radiotap interfaceDaniel Drake1-0/+1
Commit bada339ba24dee9e143bfb42e1dc61f146619846 enforces that all interfaces have a valid MAC address before they are brought up. ipw2200 does not assign a MAC address to it's radiotap interface, meaning that the radiotap interface cannot be brought up in 2.6.24. https://bugs.gentoo.org/show_bug.cgi?id=215714 Fix this by copying the MAC address from the real interface. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07libertas: fix mode initialization problemHolger Schurig1-1/+1
After moving lbs_find_best_network_ssid() from scan.c to assoc.c gcc was able to deduce that new_mode might stay uninitialized. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-04fix endian lossage in forcedethAl Viro1-3/+2
a) if you initialize something with le32_to_cpu(...), then |= it with host-endian and feed to cpu_to_le32(), it's most definitely *not* __le32. As sparse would've told you... b) the whole sequence is |= cpu_to_le32(host-endian constant) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-04net/tokenring/olympic.c section fixesAdrian Bunk1-3/+3
My previous section fix only turned one section problem into another section problem. This patch fixes it for real. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-04net: marvell.c fix sparse shadowed variable warningHarvey Harrison1-2/+0
The other if blocks don't redeclare temp, remove the redeclaration in the final if() block. drivers/net/phy/marvell.c:214:7: warning: symbol 'temp' shadows an earlier one drivers/net/phy/marvell.c:160:6: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-03[TG3]: Add PHY workaround for 5784Matt Carlson2-14/+219
The 5784 B step and newer chips require the PHY DSPs to be fine-tuned based on one-time programmable values stored in the chip. This is essential to achieve optimal PHY operations especially when using long cables. We also need to properly handle the 10Mbit RX bit in the CPMU_CTRL register during PHY reset. Update version to 3.89. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds8-8/+15
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ohci: fix 2 timers to fire at jiffies + 1s USB: Allow initialization of broken keyspan serial adapters. USB: fix bug in sg initialization in usbtest USB: serial: fix regression in Visor/Palm OS module for kernels >= 2.6.24 USB: cp2101: Add identifiers for the Telegesys ETRX2USB USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements. USB: another ehci_iaa_watchdog fix
2008-04-02Char: rio, fix sparse warningsJiri Slaby2-1/+7
Add some locks and unlocks to some code paths. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02Char: ip2, fix sparse warningsJiri Slaby1-5/+7
Unlock two grabbed locks on some paths. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02nbd: prevent sock_xmit from attempting to use a NULL socketMike Snitzer1-0/+6
NBD does not protect the nbd_device's socket from becoming NULL during receives. This closes a race with the NBD_CLEAR_SOCK ioctl (nbd-client -d) setting the nbd_device's socket to NULL right before NBD calls sock_xmit. Signed-off-by: Mike Snitzer <snitzer@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02atmel_serial: fix uart/console concurrent accessMarc Pignat1-0/+11
Strange chars appear on the serial port when a printk and a printf happens at the same time. This is caused by the pdc sending chars while atmel_console_write (called from printk) is executing Concurent access of uart and console to the same port leads to corrupted data to be transmitted, so disable tx dma (PDC) while writing to the console. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02atmel_serial: avoid stopping pdc during transmissionMichael Trimarchi1-9/+10
I found a problem related to losing data during pdc transmission in atmel_serial: connect ttyS1 with ttyS2 using a loopback cable, send 30 byte of packet from one to the other and waiting for 30 byte. On the other side just read and echo the data received. We always call atmel_tx_dma() from the tasklet regardless of what interrupt triggered it. Signed-off-by: michael <trimarchi@gandalf.sssup.it> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02USB: ohci: fix 2 timers to fire at jiffies + 1sRichard Kennedy2-2/+2
Code inspection discovered in 2 places timers were being incorrectly setup using round_jiffies_relative(HZ). The timer would then fire at time (0 <= T < HZ). Fix them to use round_jiffies(jiffies + HZ); Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: Allow initialization of broken keyspan serial adapters.Clark Rawlins1-0/+4
Fixes the keyspan driver after the addition of additional checking of driver requirements introduced in usb-serial.c commit 063a2da8f01806906f7d7b1a1424b9afddebc443. The initialization of the keyspan usb_serial_driver structs were not initializing the num_interrupt_out field and the additional checking was rejecting the end point so the driver wouldn't finish initializing. This commit initializes the fields to NUM_DONT_CARE. It works for the keyspan USA-49WG and doesn't break the USA-19HS which are the two keyspan devices I have to test with. Signed-off-by: Clark Rawlins <clark.rawlins@escient.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: fix bug in sg initialization in usbtestAlan Stern1-1/+2
This patch (as1062) fixes a bug in the scatter-gather initialization code in the usbtest driver. When the sg-helper conversion was performed, it wasn't done correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: serial: fix regression in Visor/Palm OS module for kernels >= 2.6.24Brad Sawatzky1-1/+1
Fixes a bug/inconsistency revealed by the additional sanity checking in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 introduced in the original 2.6.24 branch. The Handspring Visor / PalmOS 4 device structure defines .num_bulk_out=2 but the usb-serial probe returns num_bulk_out=3, triggering the check in the above commit and forcing a bail out when the device (a Garmin iQue in my case) attempts to connect. The patch bumps the expected number of endpoints to 3. FWIW, this patch will probably solve the following kernel bug report for Treo users (identical symptoms, different model PalmOS units): <http://bugzilla.kernel.org/show_bug.cgi?id=10118> Signed-off-by: Brad Sawatzky <brad+kernel@swatter.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: cp2101: Add identifiers for the Telegesys ETRX2USBFlorian Fainelli1-0/+1
This patch adds support for the Telegesys ETRX2USB which works fine with the cp2101 driver. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Tested-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements.Robert Spanton1-2/+2
The changes introduced in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 changed the semantics of the num_interrupt_in, num_interrupt_out, num_bulk_in and num_bulk_out entries of the usb_serial_driver struct to be the number of endpoints the device has when probed. This patch changes the ti_1port_device usb_serial_driver struct to reflect this change. The single port devices only have 1 bulk_out endpoint in their initial configuration, and so this patch changes the number of other types to NUM_DONT_CARE. The same change probably needs doing to the ti_2port_device struct, but I don't have a two port device at hand. Signed-off-by: Robert Spanton <rspanton@zepler.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: another ehci_iaa_watchdog fixDavid Brownell1-2/+3
This patch, suggested by Alan Stern, fixes the hung USB issues on my notebook from suspend/resume cycles. It does so by eliminating some confusion about the internal state machine associated with unlinking from the EHCI async schedule ring, which caused a recent regression: http://bugzilla.kernel.org/show_bug.cgi?id=10345 Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds13-1/+26
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use ->ata_input_data in ide_driveid_update() ide-h8300: 32-bit I/O is unsupported ide/legacy/q40ide.c: add MODULE_LICENSE ide/legacy/macide: add MODULE_LICENSE ide/legacy/falconide.c: add MODULE_LICENSE ide/legacy/buddha.c: add MODULE_LICENSE ide/legacy/gayle.c: add MODULE_LICENSE ide/h8300/ide-h8300.c: add MODULE_LICENSE ide/cris/ide-cris.c: add MODULE_LICENSE ide/arm/ide_arm.c: add MODULE_LICENSE ide/ppc/pmac.c: add MODULE_LICENSE ide/ppc/mpc8xx.c: add MODULE_LICENSE ide/pci/cmd640.c: add MODULE_LICENSE ide-pnp.c: add MODULE_LICENSE
2008-04-02ide: use ->ata_input_data in ide_driveid_update()Bartlomiej Zolnierkiewicz1-1/+1
Use ->ata_input_data method instead of calling ata_input_data() directly. Currently it matters only for (broken) ide-cris host driver but it may change in the future. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide-h8300: 32-bit I/O is unsupportedBartlomiej Zolnierkiewicz1-0/+1
This host driver doesn't support 32-bit I/O (it sets hwif->INSL/OUTSL to NULL) so IDE_HFLAG_NO_IO_32BIT host flag needs to be set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/q40ide.c: add MODULE_LICENSEAdrian Bunk1-0/+2
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/macide: add MODULE_LICENSEAdrian Bunk1-0/+2
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/falconide.c: add MODULE_LICENSEAdrian Bunk1-0/+2
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-02ide/legacy/buddha.c: add MODULE_LICENSEAdrian Bunk1-0/+2
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-15 07:59:02 +0000