summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-09-20habanalabs: eliminate aggregate use warningOded Gabbay5-10/+8
When doing sizeof() and giving as argument a dereference of a pointer-to-a-pointer object, clang will issue a warning. Eliminate the warning by passing struct <name>* Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-20habanalabs/gaudi: use 8KB aligned address for TPC kernelsTomer Tayar1-3/+4
I$ prefetch is enabled when sending a TPC kernel to initialize the TPC memory, and it has a restriction that the base address will be aligned to 8KB. Currently the base address is 128 bytes from the start address of the device SRAM, so prefetching will start 128 bytes before the actual kernel memory. Modify the kernel address to be 8KB aligned. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-20habanalabs: remove some f/w descriptor validationsfarah kassabri1-29/+14
To be forward-backward compatible with the firmware in the initial communication during preboot, we need to remove the validation of the header size. This will allow us to add more fields to the lkd_fw_comms_desc structure. Instead of the validation of the header size, we just print warning when some mismatch in descriptor has been revealed, and we calculate the CRC base on descriptor size reported by the firmware instead of calculating it ourselves. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-20habanalabs: build ASICs from new to oldOhad Sharabi1-4/+4
Newer ASICs code changes more often, has more chance to fail compilation. So, let's compile them first so errors in those files will fail compilation sooner. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: allow user to flush PCIE by readOfir Bitton3-1/+192
In order for the user to flush PCIE he needs to read some register from PCIE block. The chosen register is SPECIAL_GLBL_SPARE_0 and hence needs to be unsecured. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: failure to open device due to reset is debug levelOded Gabbay1-2/+2
If the user wants to open the device, and the device is currently in reset, the user will get an error from the open(). We don't need to display an error in the dmesg for that as it is not a real error and we can spam the kernel log with this message. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: Remove unnecessary (void*) conversionsLi zeming1-3/+3
The void pointer object can be directly assigned to different structure objects, it does not need to be cast. Signed-off-by: Li zeming <zeming@nfschina.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: add secured attestation info uapiDani Liberman4-2/+176
User will provide a nonce via the ioctl, and will retrieve secured attestation data of the boot, generated using given nonce. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: add handling to pmmu events in eqe handlerDani Liberman1-0/+1
In order to get the error cause and the captured address in case of page fault, added pmmu events to eqe handler. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi: change TPC Assert to use TPC DEC instead of QMAN errTal Cohen1-6/+6
This change is done while there is a problem to use QMAN error for TPC assert async. The problem involves security limitation that exists to generate the assert via QMAN error. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: rename error info structureDani Liberman5-42/+43
As a preparation for adding more errors to it, change to more suitable name. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: get f/w reset status register dynamicallyfarah kassabri2-2/+7
Get the firmware reset status address from the dynamic registers we read from the firmware instead of using a define. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: increase hard-reset sleep time to 2 secTomer Tayar1-1/+1
The access to the device registers is blocked during hard reset, until preboot runs and allows the access to specific registers, including the PSOC BTM_FSM register which is used to know when the reset is done. Between the reset request and until this register is polled there is a small delay of 500 msec which is not enough for F/W to process the reset and for preboot to run, so the register might be accessed while it is blocked. To avoid it, increase the delay to 2 sec. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: print RAZWI info upon PCIe access errorTomer Tayar2-4/+61
Add the dump of the RAZWI information when a PCIe access is blocked by RR. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: MMU invalidation h/w is per deviceOded Gabbay6-38/+42
The code used the mmu mutex to protect access to the context's page tables and invalidation of the MMU cache. Because pgt are per context, the mmu mutex was a member of the context object. The problem is that the device has a single MMU invalidation h/w (per MMU). Therefore, the mmu mutex should not be a property of the context but a property of the device. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: new notifier events for device stateTal Cohen2-6/+87
Add new notifier events that inform several device states. General H/W error raised on device general H/W error occurs. User engine error is raised when a device engine informs of an error. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: free event irq if init failsOded Gabbay1-1/+5
In case initialization fails after event irq was requested, we need to release that irq. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: fix resetting the DRAM BAROhad Sharabi1-19/+22
Current code does not takes into account the new DRAM region base and so calculated address is wrong and can lead to crush. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: add support for new cpucp return codesOfir Bitton4-4/+51
Firmware now responds with a more detailed cpucp return codes. Driver can now distinguish between error and debug return codes. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: read F/W security indication after hard resetTomer Tayar2-7/+7
F/W security status might change after every reset. Add the reading of the preboot status to the hard reset sequence, which among others reads this security indication. As this preboot status reading includes the waiting for the preboot to be ready, it can be removed from the CPU init which is done in a later stage. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi: rename mme cfg error response printOfir Bitton1-1/+1
Current description is misleading hence we rename it to a more suitable error description. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: fix possible hole in device vafarah kassabri2-86/+20
cb_map_mem() uses gen_pool_alloc() to get virtual address for mapping a CB. The mapping is done in chunks of page size, so if the CB size is larger, it is possible that the allocated virtual addresses won't be consecutive. User retrieves this device VA which returns the virtual address in the first va_block. If there is a "hole" in the virtual addresses, user can configure a HW block with a bad device VA. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: send device activity in a proper contextOfir Bitton2-4/+4
'Device activity open packet' should be sent outside of mutex as there is no real necessity for a lock. In addition 'device activity close packet' should be sent upon an actual release of the device. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs: send device active message to f/wfarah kassabri9-0/+58
As part of the RAS that is done by the f/w, we should send a message to the f/w when a user either acquires or releases the device. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-19habanalabs/gaudi2: dump detailed information upon RAZWIOfir Bitton1-51/+155
In order to improve debuggability, we add all available information when a RAZWI event occur. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs/gaudi2: log critical events with no rate limitfarah kassabri1-4/+11
When we have a storm of errors of HBM ECC SERR we can reach a situation where driver start hard reset flow without logging the error cause that caused the hard reset due to logs rate limiting. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: ignore EEPROM errors during bootOfir Bitton2-0/+14
EEPROM errors reported by firmware are basically warnings and should not fail the boot process. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: perform context switch flow only if neededOfir Bitton3-4/+9
Except Goya, none of our ASICs require context switch flow, hence we enable this flow only where it is needed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: set command buffer host VA dynamicallyDafna Hirschfeld5-18/+18
Set the addresses for userspace command buffer dynamically instead of hard-coded. There is no reason for it to be hard-coded. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: trace DMA allocationsOhad Sharabi2-27/+62
This patch add tracepoints in the code for DMA allocation. The main purpose is to be able to cross data with the map operations and determine whether memory violation occurred, for example free DMA allocation before unmapping it from device memory. To achieve this the DMA alloc/free code flows were refactored so that a single DMA tracepoint will catch many flows. To get better understanding of what happened in the DMA allocations the real allocating function is added to the trace as well. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: trace MMU map/unmap pageOhad Sharabi1-0/+7
This patch utilize the defined tracepoint to trace the MMU's pages map/unmap operations. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: define trace eventsOhad Sharabi1-0/+3
This patch adds trace events for habanalabs driver to gain all the benefits such an infrastructure can supply. The following events were added: - MMU map/unmap: to be able to track driver's memory allocations - DMA alloc/free: to track our DMA allocation the above trace points in conjunction will help us map the device memory usage as well as to be able to track memory violations. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Acked-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs/gaudi2: assigning PQFs for ARC f/w in PDMARajarama Manjukody Bhat2-5/+16
Assigning 3 PQFs in PDMA1 and 2 PQFs in PDMA0 for ARC firmware usage. Signed-off-by: Rajarama Manjukody Bhat <rmbhat@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: fix calculation of DRAM base address in PCIe BARTomer Tayar1-1/+5
The calculation of the device DRAM base address before setting the relevant PCIe BAR to point at it, has an assumption that this BAR is used to access only the DRAM, and thus the covered DRAM size is a power of 2. In future ASICs it is not necessarily true, so need to update the calculation to support also a non-power-of-2 size. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: if map page fails don't try to unmap itDafna Hirschfeld1-0/+2
The original code tried to unmap a page that was not mapped as part of the map page error path. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: select FW_LOADER in KconfigOded Gabbay1-0/+1
The driver is loading firmware to the device and we use the firmware loading functions from the FW_LOADER module. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: add cdev index data memberOmer Shpigelman2-5/+9
Instead of recalculating the cdev index, store it in a dedicated data member. This data member is intended to be passed to other drivers using the auxiliary bus infra and hence this new data member is necessary in case that the calculation is changed in the future. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: fix bug when setting va block sizeDafna Hirschfeld1-2/+2
the size of a block is always 'block->end - block->start + 1' Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: expose device security status using info ioctlOfir Bitton1-0/+1
In order for the user to know if he is running on a secured device or not, we add it also to the hw_ip info ioctl. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: expose device security status through sysfsOfir Bitton1-0/+10
In order for the user to know if he is running on a secured device or not, a sysfs node is added. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: remove secured PCI IDsOfir Bitton1-6/+0
Secured PCI ID will not be supported in new asics because the security status can always be read from the f/w. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: fix H/W block handling for partial unmappingsTomer Tayar3-9/+21
Several munmap() calls can be done or a mapped H/W block that has a larger size than a page size. Releasing the object should be done only when all mapped range is unmapped. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: unify hwmon resources clean upDani Liberman5-50/+25
Since hwmon fini code is common for all asics, unified it to common function. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs/gaudi2: new API to control engine cores running modeTal Cohen4-7/+117
The current flow of halting the engine cores is implemented by command buffers built by the user space and sent towards the Driver. This current flow is broken since the user space does not know when the cores actually halt as sending a workload is async op. Therefore the application can not free the memory that is mapped to the engine cores. This new API allows the user space to control the running mode. The API call is sync (returns after the cores are set to the requested mode). Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: remove left-over code from bring-upOded Gabbay2-27/+21
There is some left-over code from the gaudi2 bring-up that wasn't removed so far. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs/gaudi2: change device f/w security checkfarah kassabri2-15/+8
On Gaudi2 the f/w always configures the PCIe iATU and allows access to scratchpad registers. Therefore, we can know if the f/w is secured by reading a status bit from the f/w registers. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: move common function out of debugfs.cOded Gabbay2-25/+24
A common function that is called from multiple places can't be located in degugfs.c because that file is only compiled if debugfs is enabled in the kernel config file. This can lead to undefined symbol compilation error. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: add a missing lock for in_reset indicationTomer Tayar1-0/+2
Add a missing lock in hl_device_resume() when it assigns a value to the 'in_reset' indication. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: fix vma fields assignments order in hl_hw_block_mmap()Tomer Tayar1-6/+5
In hl_hw_block_mmap(), the vma's 'vm_private_data' and 'vm_ops' fields are assigned before filling the content of the private data. In between there is a call to the ASIC hw_block_mmap() function, and if it fails, the vma close function will be called with a bad private data value. Fix the order of assignments to avoid this issue. In hl_hw_block_mmap() the vma's 'vm_private_data and vm_ops are assigned before setting the Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2022-09-18habanalabs: avoid returning a valid handle if map_block() failsTomer Tayar1-4/+9
map_block() sets the block id handle even if get_hw_block_id() fails, and in this case it uses block id 0 which might be a valid id. Modify it to set the handle only if get_hw_block_id() succeeds. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 21:54:12 +0000