summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-02-24virtio: console: port encapsulationRusty Russell1-49/+58
We are heading towards a multiple-"port" system, so as part of weaning off globals we encapsulate the information into 'struct port'. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: console: We support only one device at a timeAmit Shah1-0/+5
We support only one virtio_console device at a time. If multiple are found, error out if one is already initialized. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24hvc_console: make the ops pointer const.Rusty Russell10-14/+16
This is nicer for modern R/O protection. And noone needs it non-const, so constify the callers as well. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Amit Shah <amit.shah@redhat.com> To: Christian Borntraeger <borntraeger@de.ibm.com> Cc: linuxppc-dev@ozlabs.org
2010-02-24virtio: console: statically initialize virtio_consRusty Russell1-26/+34
That way, we can make it const as is good kernel style. We use a separate indirection for the early console, rather than mugging ops.put_chars. We rename it hv_ops, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: console: comment cleanupRusty Russell1-54/+54
Remove old lguest-style comments. [Amit: - wingify comments acc. to kernel style - indent comments ] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: Initialize vq->data entries to NULLAmit Shah1-1/+4
vq operations depend on vq->data[i] being NULL to figure out if the vq entry is in use (since the previous patch). We have to initialize them to NULL to ensure we don't work with junk data and trigger false BUG_ONs. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Shirley Ma <xma@us.ibm.com>
2010-02-24virtio: Add ability to detach unused buffers from vringsShirley Ma1-0/+25
There's currently no way for a virtio driver to ask for unused buffers, so it has to keep a list itself to reclaim them at shutdown. This is redundant, since virtio_ring stores that information. So add a new hook to do this. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio_blk: add block topology supportChristoph Hellwig1-15/+46
Allow reading various alignment values from the config page. This allows the guest to much better align I/O requests depending on the storage topology. Note that the formats for the config values appear a bit messed up, but we follow the formats used by ATA and SCSI so they are expected in the storage world. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: use smp_XX barriers on SMPMichael S. Tsirkin1-4/+22
virtio is communicating with a virtual "device" that actually runs on another host processor. Thus SMP barriers can be used to control memory access ordering. Where possible, we should use SMP barriers which are more lightweight than mandatory barriers, because mandatory barriers also control MMIO effects on accesses through relaxed memory I/O windows (which virtio does not use) (compare specifically smp_rmb and rmb on x86_64). We can't just use smp_mb and friends though, because we must force memory ordering even if guest is UP since host could be running on another CPU, but SMP barriers are defined to barrier() in that configuration. So, for UP fall back to mandatory barriers instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: remove bogus barriers from DEBUG version of virtio_ring.cRusty Russell1-2/+1
With DEBUG defined, we add an ->in_use flag to detect if the caller invokes two virtio methods in parallel. The barriers attempt to ensure timely update of the ->in_use flag. But they're voodoo: if we need these barriers it implies that the calling code doesn't have sufficient synchronization to ensure the code paths aren't invoked at the same time anyway, and we want to detect it. Also, adding barriers changes timing, so turning on debug has more chance of hiding real problems. Thanks to MST for drawing my attention to this code... CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: fix balloon without VIRTIO_BALLOON_F_STATS_VQRusty Russell1-0/+1
When running under qemu-kvm-0.11.0: BUG: unable to handle kernel paging request at 56e58955 ... Process vballoon (pid: 1297, ti=c7976000 task=c70a6ca0 task.ti=c7 ... Call Trace: [<c88253a3>] ? balloon+0x1b3/0x440 [virtio_balloon] [<c041c2d7>] ? schedule+0x327/0x9d0 [<c88251f0>] ? balloon+0x0/0x440 [virtio_balloon] [<c014a2d4>] ? kthread+0x74/0x80 [<c014a260>] ? kthread+0x0/0x80 [<c0103b36>] ? kernel_thread_helper+0x6/0x30 need_stats_update should be zero-initialized. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Adam Litke <agl@us.ibm.com>
2010-02-24virtio: Fix scheduling while atomic in virtio_balloon statsAdam Litke1-4/+18
This is a fix for my earlier patch: "virtio: Add memory statistics reporting to the balloon driver (V4)". I discovered that all_vm_events() can sleep and therefore stats collection cannot be done in interrupt context. One solution is to handle the interrupt by noting that stats need to be collected and waking the existing vballoon kthread which will complete the work via stats_handle_request(). Rusty, is this a saner way of doing business? There is one issue that I would like a broader opinion on. In stats_request, I update vb->need_stats_update and then wake up the kthread. The kthread uses vb->need_stats_update as a condition variable. Do I need a memory barrier between the update and wake_up to ensure that my kthread sees the correct value? My testing suggests that it is not needed but I would like some confirmation from the experts. Signed-off-by: Adam Litke <agl@us.ibm.com> To: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@linux.vnet.ibm.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24virtio: Add memory statistics reporting to the balloon driver (V4)Adam Litke1-8/+86
Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2010-02-24Add __devexit_p around reference to virtio_pci_removeJamie Lokier1-1/+1
This is needed to compile with CONFIG_VIRTIO_PCI=y, because virtio_pci_remove is marked __devexit. Signed-off-by: Jamie Lokier <jamie@shareable.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-22efifb: fix framebuffer handoffMarcin Slusarz1-1/+10
Commit 4410f3910947dcea8672280b3adecd53cec4e85e ("fbdev: add support for handoff from firmware to hw framebuffers") didn't add fb_destroy operation to efifb. Fix it and change aperture_size to match size passed to request_mem_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15151 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reported-by: Alex Zhavnerchik <alex.vizor@gmail.com> Tested-by: Alex Zhavnerchik <alex.vizor@gmail.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-22geode-mfgpt: restore previous behavior for selecting IRQJens Rottmann1-1/+1
geode-mfgpt: restore previous behavior for selecting IRQ The MFGPT IRQ used to be, in order of decreasing priority, * IRQ supplied by the user as a boot-time parameter, * IRQ previously set by the BIOS or another driver, * default IRQ given at compile time. Return to this behavior, which got broken when splitting the MFGPT/clocksource driver for 2.6.33-rc1. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-22Merge branch 'for-linus' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: usbtouchscreen - extend coordinate range for Generaltouch devices Input: polldev can cause crash in case when polling disabled
2010-02-22i915 / PM: Fix hibernate regression caused by suspend/resume splittingRafael J. Wysocki1-21/+9
Commit 84b79f8d2882b0a84330c04839ed4d3cefd2ff77 (drm/i915: Fix crash while aborting hibernation) attempted to fix a regression introduced by commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915), but it went too far trying to split the freeze/suspend and resume/thaw parts of the code. As a result, it introduced another regression, which only is visible on some systems. Fix the problem by merging i915_drm_suspend() with i915_drm_freeze() and moving some code from i915_resume() into i915_drm_thaw(), so that intel_opregion_free() and intel_opregion_init() are also executed in the freeze and thaw code paths, respectively. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Pedro Ribeiro <pedrib@gmail.com> Tested-by: Tino Keitel <tino.keitel@tikei.de> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-21Input: usbtouchscreen - extend coordinate range for Generaltouch devicesRoy Yin1-4/+4
Generaltouch protocol allows for coordinates in [0, 0xffff] range and there are devices reporting coordinates as high as 0x7fff so let's update the driver to reflect that. Signed-off-by: Roy Yin <yhch@generaltouch.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-21[WATCHDOG] bfin: fix max timeout calculationMike Frysinger1-6/+7
Relying on overflow/wrap around isn't exact because if you wrap far enough, you get back to "valid" values. Reported-by: Thorsten Pohlmann <pohlmann@tetronik.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@kernel.org>
2010-02-20Merge branch 'v4l_for_linus' of ↵Linus Torvalds7-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: bttv: Move I2C IR initialization V4L/DVB: Video : pwc : Fix regression in pwc_set_shutter_speed caused by bad constant => sizeof conversion. soc-camera: mt9t112: modify exiting conditions from standby mode V4L/DVB: cxusb: Select all required frontend and tuner modules V4L/DVB: dvb: l64781.ko broken with gcc 4.5
2010-02-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: allow alignment fault mode to be configured at kernel boot ARM: Update mach-types ARM: 5951/1: ARM: fix documentation of the PrimeCell bus ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor MAINTAINERS: fix my e-mail and status for Gemini and FA526 Gemini: wrong registers used to set reg_level in gpio_set_irq_type() ARM: 5944/1: scsi: fix timer setup in fas216.c ARM: 5938/1: ARM: L2: export outer_cache_fns
2010-02-20Input: polldev can cause crash in case when polling disabledSamu Onkalo1-0/+6
When polled input device is opened and closed and there are no other users of polled device, the workqueue is created and destroyed in every open / close operation. It is probable that at some point dynamic allocation of internal parts of the workqueue cause changes to the workqueue. When a work is queued to the workqueue the work struct contains pointers to the workqueue data. If the workqueue has been changed and the work has never been queued to the new workqueue, work-struct contains pointers to the non-existing workqueue. This will cause crash at the work cancellation during device close since cancellation of a work assumes that the workqueue exists. To prevent that, work struct is cleaned up at device close. This keeps work struct clean for the next use. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds8-16/+40
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] megaraid_sas: fix for 32bit apps [SCSI] fcoe: Only rmmod fcoe.ko if there are no active connections [SCSI] libfcoe: Send port LKA every FIP_VN_KA_PERIOD secs. [SCSI] libfc: Don't assume response request present. [SCSI] libfc: Fix e_d_tov ns -> ms scaling factor in PLOGI response. [SCSI] libfc: call ddp setup for only FCP reads to avoid accessing junk fsp pointer [SCSI] iscsi_tcp regression: remove bogus warn on in write path
2010-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-19/+28
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: sfc: SFE4002/SFN4112F: Widen temperature and voltage tolerances sfc: Fix sign of efx_mcdi_poll_reboot() error in efx_mcdi_poll() net-sysfs: Use rtnl_trylock in wireless sysfs methods. net: Fix sysctl restarts...
2010-02-19Merge branch 'drm-linus' of ↵Linus Torvalds8-18/+39
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: bump the UMS driver version number to indicate rv740 fix drm/radeon/kms: free fence IB if it wasn't emited at IB free time drm/ttm: fix caching problem on non-PAT systems. drm/radeon/rv740: fix backend setup drm/radeon/kms: fix shared ddc detection drm/radeon/kms/rs600: add connector quirk vgaarb: fix "target=default" passing
2010-02-19sfc: SFE4002/SFN4112F: Widen temperature and voltage tolerancesBen Hutchings1-18/+27
The temperature and voltage limits currently set on these boards are too conservative and will cause the driver to stop the net device erroneously in some systems. Based on a review of the chip datasheets and advice from the designer of these boards: - Raise the maximum board temperatures to the specified maximum ambient temperatures for their PHYs plus the expected temperature bias of the board - Raise the maximum controller temperature to 90 degrees - Lower the minimum temperatures to 0 degrees - Widen the voltage tolerances to at least +/- 10% Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19sfc: Fix sign of efx_mcdi_poll_reboot() error in efx_mcdi_poll()Ben Hutchings1-1/+1
efx_mcdi_poll() uses positive error numbers, matching the MCDI protocol. It must negate the result of efx_mcdi_poll_reboot() which returns the usual negative error numbers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20drm/radeon: bump the UMS driver version number to indicate rv740 fixDave Airlie1-1/+2
This lets UMS userspace know the rv740 fix is in. For KMS we can consider the kernel release to be the v2.0.0 release so we don't need the bump there. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-20drm/radeon/kms: free fence IB if it wasn't emited at IB free timeJerome Glisse1-0/+2
If at IB free time fence wasn't emited that means the IB wasn't scheduled because an error occured somewhere, thus we can free then fence and mark the IB as free. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-20drm/ttm: fix caching problem on non-PAT systems.Francisco Jerez1-7/+11
http://bugzilla.kernel.org/show_bug.cgi?id=15328 This fixes a serious regression on AGP/non-PAT systems, where pages were ending up in the wrong state and slowing down the whole system. [airlied: taken this from the bug as the other option is to revert the change which caused it]. Tested-by: John W. Linville (in bug). Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-20drm/radeon/rv740: fix backend setupAlex Deucher2-6/+12
This patch fixes occlusion queries and rendering errors on rv740 boards. Hardcoding the backend map is not an optimal solution, but a better fix is being worked on. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-20drm/radeon/kms: fix shared ddc detectionAlex Deucher1-3/+2
Just compare the i2c id since the i2c structs may be slighly different. Fixes fdo bug 26616. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-20drm/radeon/kms/rs600: add connector quirkAlex Deucher1-0/+9
rs600 board lists DVI port as HDMI. Fixes fdo bug 26605 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-20vgaarb: fix "target=default" passingKyle McMartin1-1/+1
Commit 77c1ff3982c6b36961725dd19e872a1c07df7f3b fixed the userspace pointer dereference, but introduced another bug pointed out by Eugene Teo in RH bug #564264. Instead of comparing the point we were at in the string, we instead compared the beginning of the string to "default". Signed-off-by: Kyle McMartin <kyle@redhat.com> Reported-by: Eugene Teo <eteo@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-19[SCSI] megaraid_sas: fix for 32bit appsTomas Henzl1-2/+16
It looks like this patch - commit 7b2519afa1abd1b9f63aa1e90879307842422dae Author: Yang, Bo <Bo.Yang@lsi.com> Date: Tue Oct 6 14:52:20 2009 -0600 [SCSI] megaraid_sas: fix 64 bit sense pointer truncation has caused a problem for 32bit programs with 64bit os - http://bugzilla.kernel.org/show_bug.cgi?id=15001 fix by converting the user space 32bit pointer to a 64 bit one when needed. [jejb: fix up some 64 bit warnings] Signed-off-by: Tomas Henzl <thenzl@redhat.com> Cc: Bo Yang <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-19V4L/DVB: bttv: Move I2C IR initializationJean Delvare3-2/+8
Move I2C IR initialization from just after I2C bus setup to right before non-I2C IR initialization. This avoids the case where an I2C IR device is blocking audio support (at least the PV951 suffers from this). It is also more logical to group IR support together, regardless of the connectivity. This fixes bug #15184: http://bugzilla.kernel.org/show_bug.cgi?id=15184 Signed-off-by: Jean Delvare <khali@linux-fr.org> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-19V4L/DVB: Video : pwc : Fix regression in pwc_set_shutter_speed caused by bad ↵Martin Fuzzey1-1/+1
constant => sizeof conversion. Regression was caused by my commit 6b35ca0d3d586b8ecb8396821af21186e20afaf0 which determined message size using sizeof rather than hardcoded constants. Unfortunately pwc_set_shutter_speed reuses a 2 byte buffer for a one byte message too so the sizeof was bogus in this case. All other uses of sizeof checked and are ok. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-19soc-camera: mt9t112: modify exiting conditions from standby modeKuninori Morimoto1-1/+1
This polling is needed if camera is in standby mode, but current exiting condition is inverted. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-19V4L/DVB: cxusb: Select all required frontend and tuner modulesBen Hutchings1-1/+3
cxusb uses the atbm8830 and lgs8gxx (not lgs8gl5) frontends and the max2165 tuner, so it needs to select them. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-19V4L/DVB: dvb: l64781.ko broken with gcc 4.5Richard Guenther1-2/+2
I'm trying to fix it on the GCC side (PR43007), but the module is quite stupid in using ULL constants to operate on u32 values: static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { ... static const u32 ppm = 8000; u32 spi_bias; ... spi_bias *= 1000ULL; spi_bias /= 1000ULL + ppm/1000; which causes current GCC 4.5 to emit calls to __udivdi3 for i?86 again. This patch fixes this issue. Signed-off-by: Richard Guenther <rguenther@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-18Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainlineRussell King22-156/+200
2010-02-18ARM: 5944/1: scsi: fix timer setup in fas216.cGuennadi Liakhovetski1-1/+1
mod_timer() takes an absolute time and not a delay as its argument. Cc: <stable@kernel.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18Merge branch 'for-linus' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add KEY_RFKILL Input: i8042 - fix KBC jam during hibernate
2010-02-18Merge branch 'release' of ↵Linus Torvalds8-14/+55
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: fix "acpi=ht" boot option ACPI, i915: blacklist Clevo M5x0N bad_lid state ACPI: fix High cpu temperature with 2.6.32 ACPI: dock: properly initialize local struct dock_station in dock_add() ACPI: remove Asus P2B-DS from acpi=ht blacklist thinkpad-acpi: wrong thermal attribute_group removed in thermal_exit() ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was found ACPI: Add NULL pointer check in acpi_bus_start ACPI: processor: only evaluate _PDC once per processor ACPI: processor: add kernel command line support for early _PDC eval
2010-02-18Merge branch 'drm-linus' of ↵Linus Torvalds13-142/+137
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: fix bo's fence association drm/radeon/kms: fix indirect buffer management V2 drm/edid: Fix interlaced detailed timings to be frame size, not field. drm/vmwgfx: Use fb handover mechanism instead of stealth mode. drm/radeon/kms: use udelay for short delays drm/nouveau: Force TV encoder DPMS reinit after resume. drm/nouveau: use mutex for vbios lock
2010-02-18Input: i8042 - fix KBC jam during hibernateAlan Jenkins1-0/+8
633aae2 "Input: i8042 - switch to using dev_pm_ops" removed handling for PMSG_THAW, since we do not need to do anything during freeze and thus it was thougt that thaw is not needed as well. However, there is a period when interrupts are kept off, and if key happens to be pressed during that time KBC becomes jammed. To avoid the jam we simply need to poll KBC once during thaw. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-18Merge branches 'bugzilla-14886', 'bugzilla-15000', 'bugzilla-15040', ↵Len Brown8-14/+55
'bugzilla-15108', 'pdc', 'hotplug-null-ref' and 'thinkpad' into release
2010-02-18ACPI: fix "acpi=ht" boot optionLen Brown1-2/+2
We broke "acpi=ht" in 2.6.32 by disabling MADT parsing for acpi=disabled. e5b8fc6ac158f65598f58dba2c0d52ba3b412f52 This also broke systems which invoked acpi=ht via DMI blacklist. acpi=ht is a really ugly hack, but restore it for those that still use it. http://bugzilla.kernel.org/show_bug.cgi?id=14886 Signed-off-by: Len Brown <len.brown@intel.com>
2010-02-18Merge branch 'for-airlied' of ↵Dave Airlie3-5/+6
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-linus * 'for-airlied' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: Force TV encoder DPMS reinit after resume. drm/nouveau: use mutex for vbios lock
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-11 23:20:41 +0000