summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-12-12net: ena: Add first_interrupt field to napi structSameeh Jubran2-2/+6
The first_interrupt field is accessed in ena_intr_msix_io() upon receiving an interrupt.The rx_ring and tx_ring fields of napi can be NULL when receiving interrupt for xdp queues. This patch fixes the issue by moving the field to the ena_napi struct. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12net: ena: Implement XDP_TX actionSameeh Jubran3-186/+701
This commit implements the XDP_TX action in the ena driver. We allocate separate tx queues for the XDP_TX. We currently allow xdp only when there is enough queues to allocate for xdp. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12net: ena: implement XDP drop supportSameeh Jubran2-11/+233
This commit implements the basic functionality of drop/pass logic in the ena driver. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: re-attempt probing for phyRussell King1-17/+42
Some 1000BASE-T PHY modules take a while for the PHY to wake up. Retry the probe a number of times before deciding that the module has no PHY. Tested with: Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond. Champion One 1000SFPT - PHY takes about 200ms to respond. Mikrotik S-RJ01 - no PHY Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: error handling for phy probeRussell King1-9/+17
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: rename sm_retriesRussell King1-5/+5
Rename sm_retries as sm_fault_retries, as this is what this member is tracking. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: use a definition for the fault recovery attemptsRussell King1-3/+11
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: add support for Clause 45 PHYsRussell King1-4/+40
Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via the normal I2C address. Detect 10G BASE-T PHYs which may have an accessible PHY and probe for it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phy: add Broadcom BCM84881 PHY driverRussell King3-0/+276
Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on Methode DM7052 SFPs. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: make Broadcom BCM84881 based SFPs workRussell King1-2/+16
The Broadcom BCM84881 does not appear to send the SGMII control word when operating in SGMII mode, which causes network adapters to fail to link with the PHY, or decide to operate at fixed 1G speed, even if the PHY negotiated 100M. Work around this by detecting the Broadcom BCM84881 and switch to phy mode rather than inband mode. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: delay MAC configuration for copper SFP modulesRussell King2-10/+71
Knowing whether we need to delay the MAC configuration because a module may have a PHY is useful to phylink to allow NBASE-T modules to work on systems supporting no more than 2.5G speeds. This commit allows us to delay such configuration until after the PHY has been probed by recording the parsed capabilities, and if the module may have a PHY, doing no more until the module_start() notification is called. At that point, we either have a PHY, or we don't. We move the PHY-based setup a little later, and use the PHYs support capabilities rather than the EEPROM parsed capabilities to determine whether we can support the PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: split phylink_sfp_module_insert()Russell King1-19/+28
Split out the configuration step from phylink_sfp_module_insert() so we can re-use this later. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: split link_an_mode configured and current settingsRussell King1-28/+31
Split link_an_mode between the configured setting and the current operating setting. This is an important distinction to make when we need to configure PHY mode for a plugged SFP+ module that does not use in-band signalling. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: support Clause 45 PHYs on SFP+ modulesRussell King1-5/+16
Some SFP+ modules have Clause 45 PHYs embedded on them, which need a little more handling in order to ensure that they are correctly setup, as they switch the PHY link mode according to the negotiated speed. With Clause 22 PHYs, we assumed that they would operate in SGMII mode, but this assumption is now false. Adapt phylink to support Clause 45 PHYs on SFP+ modules. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: re-split __phylink_connect_phy()Russell King1-15/+24
In order to support Clause 45 PHYs on SFP+ modules, which have an indeterminant phy interface mode, we need to be able to call phylink_bringup_phy() with a different interface mode to that used when binding the PHY. Reduce __phylink_connect_phy() to an attach operation, and move the call to phylink_bringup_phy() to its call sites. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: mdio-i2c: add support for Clause 45 accessesRussell King1-8/+20
Some SFP+ modules have PHYs on them just like SFP modules do, except they are Clause 45 PHYs. The I2C protocol used to access them is modified slightly in order to send the device address and 16-bit register index. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: move phy_start()/phy_stop() to phylinkRussell King2-2/+22
Move phy_start() and phy_stop() into the module_start and module_stop notifications in phylink, rather than having them in the SFP code. This gives phylink responsibility for controlling the PHY, rather than having SFP start and stop the PHY state machine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: add module start/stop upstream notificationsRussell King3-0/+31
When dealing with some copper modules, we can't positively know the module capabilities are until we have probed the PHY. Without the full capabilities, we may end up failing a module that we could otherwise drive with a restricted set of capabilities. An example of this would be a module with a NBASE-T PHY plugged into a host that supports phy interface modes 2500BASE-X and SGMII. The PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes, which means a subset of the capabilities are compatible with the host. However, reading the module EEPROM leads us to believe that the module only supports ethtool link mode 10GBASE-T, which is incompatible with the host - and thus results in the module being rejected. This patch adds an extra notification which are triggered after the SFP module's PHY probe, and a corresponding notification just before the PHY is removed. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: add more extended compliance codesRussell King2-26/+38
SFF-8024 is used to define various constants re-used in several SFF SFP-related specifications. Split these constants from the enum, and rename them to indicate that they're defined by SFF-8024. Add and use updated SFF-8024 extended compliance code definitions for 10GBASE-T, 5GBASE-T and 2.5GBASE-T modules. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: derive interface mode from ethtool link modesRussell King3-9/+6
We don't need the EEPROM ID to derive the phy interface mode as we can derive it merely from the ethtool link modes. Remove the EEPROM ID argument to sfp_select_interface(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: remove incomplete 100BASE-FX and 100BASE-LX supportRussell King2-15/+2
The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this is probably an incorrect assumption. In any case, sfp_parse_support() will fail such a module. Let's stop pretending we support these modules. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10cxgb4: add support for high priority filtersShahjada Abul Husain9-86/+234
T6 has a separate region known as high priority filter region that allows classifying packets going through ULD path. So, query firmware for HPFILTER resources and enable the high priority offload filter support when it is available. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10enetc: remove variable 'tc_max_sized_frame' set but not usedChen Wandun1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/freescale/enetc/enetc_qos.c: In function enetc_setup_tc_cbs: drivers/net/ethernet/freescale/enetc/enetc_qos.c:195:6: warning: variable tc_max_sized_frame set but not used [-Wunused-but-set-variable] Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10nfp: add support for TLV device statsJakub Kicinski3-7/+126
Device stats are currently hard coded in the PCI BAR0 layout. Add a ability to read them from the TLV area instead. Names for the stats are maintained by the driver, and their meaning documented. This allows us to more easily add and remove device stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10enetc: add software timestampingMichael Walle2-0/+3
Provide a software TX timestamp and add it to the ethtool query interface. skb_tx_timestamp() is also needed if one would like to use PHY timestamping. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09ppp: Adjust indentation into ppp_async_inputNathan Chancellor1-9/+9
Clang warns: ../drivers/net/ppp/ppp_async.c:877:6: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] ap->rpkt = skb; ^ ../drivers/net/ppp/ppp_async.c:875:5: note: previous statement is here if (!skb) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Clean up this entire block's indentation so that it is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 6722e78c9005 ("[PPP]: handle misaligned accesses") Link: https://github.com/ClangBuiltLinux/linux/issues/800 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09net: smc911x: Adjust indentation in smc911x_phy_configureNathan Chancellor1-1/+1
Clang warns: ../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (!lp->ctl_rfduplx) ^ ../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement is here if (lp->ctl_rspeed != 100) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 0a0c72c9118c ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips") Link: https://github.com/ClangBuiltLinux/linux/issues/796 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09net: tulip: Adjust indentation in {dmfe, uli526x}_init_moduleNathan Chancellor2-5/+6
Clang warns: ../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch (mode) { ^ ../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous statement is here if (cr6set) ^ 1 warning generated. ../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch(mode) { ^ ../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous statement is here if (cr6set) ^ 1 warning generated. This warning occurs because there is a space before the tab on these lines. Remove them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. While we are here, adjust the default block in dmfe_init_module to have a proper break between the label and assignment and add a space between the switch and opening parentheses to avoid a checkpatch warning. Fixes: e1c3e5014040 ("[PATCH] initialisation cleanup for ULI526x-net-driver") Link: https://github.com/ClangBuiltLinux/linux/issues/795 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09net: phy: dp83867: Add rx-fifo-depth and tx-fifo-depthDan Murphy1-13/+49
This code changes the TI specific ti,fifo-depth to the common tx-fifo-depth property. The tx depth is applicable for both RGMII and SGMII modes of operation. rx-fifo-depth was added as well but this is only applicable for SGMII mode. So in summary if RGMII mode write tx fifo depth only if SGMII mode write both rx and tx fifo depths If the property is not populated in the device tree then set the value to the default values. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09net: sfp: avoid tx-fault with Nokia GPON moduleRussell King1-12/+30
The Nokia GPON module can hold tx-fault active while it is initialising which can take up to 60s. Avoid this causing the module to be declared faulty after the SFP MSA defined non-cooled module timeout. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09qed: remove redundant assignments to rcColin Ian King1-5/+5
The variable rc is assigned with a value that is never read and it is re-assigned a new value later on. The assignment is redundant and can be removed. Clean up multiple occurrances of this pattern. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().Mao Wenan1-1/+1
Convert cpu_to_le16(le16_to_cpu(frame->datalen) + len) to use le16_add_cpu(), which is more concise and does the same thing. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09Merge branch 'for-upstream' of ↵David S. Miller4-6/+118
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-12-09 Here's the first bluetooth-next pull request for 5.6: - Devicetree bindings updates for Broadcom controllers - Add support for PCM configuration for Broadcom controllers - btusb: Fixes for Realtek devices - butsb: A few other smaller fixes (mem leak & non-atomic allocation issue) Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-08net: WireGuard secure network tunnelJason A. Donenfeld33-0/+7014
WireGuard is a layer 3 secure networking tunnel made specifically for the kernel, that aims to be much simpler and easier to audit than IPsec. Extensive documentation and description of the protocol and considerations, along with formal proofs of the cryptography, are available at: * https://www.wireguard.com/ * https://www.wireguard.com/papers/wireguard.pdf This commit implements WireGuard as a simple network device driver, accessible in the usual RTNL way used by virtual network drivers. It makes use of the udp_tunnel APIs, GRO, GSO, NAPI, and the usual set of networking subsystem APIs. It has a somewhat novel multicore queueing system designed for maximum throughput and minimal latency of encryption operations, but it is implemented modestly using workqueues and NAPI. Configuration is done via generic Netlink, and following a review from the Netlink maintainer a year ago, several high profile userspace tools have already implemented the API. This commit also comes with several different tests, both in-kernel tests and out-of-kernel tests based on network namespaces, taking profit of the fact that sockets used by WireGuard intentionally stay in the namespace the WireGuard interface was originally created, exactly like the semantics of userspace tun devices. See wireguard.com/netns/ for pictures and examples. The source code is fairly short, but rather than combining everything into a single file, WireGuard is developed as cleanly separable files, making auditing and comprehension easier. Things are laid out as follows: * noise.[ch], cookie.[ch], messages.h: These implement the bulk of the cryptographic aspects of the protocol, and are mostly data-only in nature, taking in buffers of bytes and spitting out buffers of bytes. They also handle reference counting for their various shared pieces of data, like keys and key lists. * ratelimiter.[ch]: Used as an integral part of cookie.[ch] for ratelimiting certain types of cryptographic operations in accordance with particular WireGuard semantics. * allowedips.[ch], peerlookup.[ch]: The main lookup structures of WireGuard, the former being trie-like with particular semantics, an integral part of the design of the protocol, and the latter just being nice helper functions around the various hashtables we use. * device.[ch]: Implementation of functions for the netdevice and for rtnl, responsible for maintaining the life of a given interface and wiring it up to the rest of WireGuard. * peer.[ch]: Each interface has a list of peers, with helper functions available here for creation, destruction, and reference counting. * socket.[ch]: Implementation of functions related to udp_socket and the general set of kernel socket APIs, for sending and receiving ciphertext UDP packets, and taking care of WireGuard-specific sticky socket routing semantics for the automatic roaming. * netlink.[ch]: Userspace API entry point for configuring WireGuard peers and devices. The API has been implemented by several userspace tools and network management utility, and the WireGuard project distributes the basic wg(8) tool. * queueing.[ch]: Shared function on the rx and tx path for handling the various queues used in the multicore algorithms. * send.c: Handles encrypting outgoing packets in parallel on multiple cores, before sending them in order on a single core, via workqueues and ring buffers. Also handles sending handshake and cookie messages as part of the protocol, in parallel. * receive.c: Handles decrypting incoming packets in parallel on multiple cores, before passing them off in order to be ingested via the rest of the networking subsystem with GRO via the typical NAPI poll function. Also handles receiving handshake and cookie messages as part of the protocol, in parallel. * timers.[ch]: Uses the timer wheel to implement protocol particular event timeouts, and gives a set of very simple event-driven entry point functions for callers. * main.c, version.h: Initialization and deinitialization of the module. * selftest/*.h: Runtime unit tests for some of the most security sensitive functions. * tools/testing/selftests/wireguard/netns.sh: Aforementioned testing script using network namespaces. This commit aims to be as self-contained as possible, implementing WireGuard as a standalone module not needing much special handling or coordination from the network subsystem. I expect for future optimizations to the network stack to positively improve WireGuard, and vice-versa, but for the time being, this exists as intentionally standalone. We introduce a menu option for CONFIG_WIREGUARD, as well as providing a verbose debug log and self-tests via CONFIG_WIREGUARD_DEBUG. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: David Miller <davem@davemloft.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds41-305/+448
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds11-32/+35
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
2019-12-07Merge tag 'ntb-5.5' of git://github.com/jonmason/ntbLinus Torvalds1-0/+1
Pull NTB update from Jon Mason: "Just a simple patch to add a new Hygon Device ID to the AMD NTB device driver" * tag 'ntb-5.5' of git://github.com/jonmason/ntb: NTB: Add Hygon Device ID
2019-12-07Merge branch 'for-linus' of ↵Linus Torvalds6-17/+49
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - fixups for Synaptics RMI4 driver - a quirk for Goodinx touchscreen on Teclast tablet - a new keycode definition for activating privacy screen feature found on a few "enterprise" laptops - updates to snvs_pwrkey driver - polling uinput device for writing (which is always allowed) now works * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash Input: goodix - add upside-down quirk for Teclast X89 tablet Input: add privacy screen toggle keycode Input: uinput - fix returning EPOLLOUT from uinput_poll Input: snvs_pwrkey - remove gratuitous NULL initializers Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q
2019-12-07Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-23/+5
Pull VFIO updates from Alex Williamson: - Remove hugepage checks for reserved pfns (Ben Luo) - Fix irq-bypass unregister ordering (Jiang Yi) * tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: call irq_bypass_unregister_producer() before freeing irq vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()
2019-12-07Merge tag 'for-linus-5.5b-rc1-tag' of ↵Linus Torvalds8-62/+66
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a patch to fix a build warning - a cleanup of no longer needed code in the Xen event handling - a small series for the Xen grant driver avoiding high order allocations and replacing an insane global limit by a per-call one - a small series fixing Xen frontend/backend module referencing * tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: allow module to be cleanly unloaded xen/xenbus: reference count registered modules xen/gntdev: switch from kcalloc() to kvcalloc() xen/gntdev: replace global limit of mapped pages by limit per call xen/gntdev: remove redundant non-zero check on ret xen/events: remove event handling recursion detection
2019-12-07r8169: fix rtl_hw_jumbo_disable for RTL8168evlHeiner Kallweit1-1/+1
In referenced fix we removed the RTL8168e-specific jumbo config for RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in rtl_hw_jumbo_disable(). v2: fix referenced commit id Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07NTB: Add Hygon Device IDJiasen Lin1-0/+1
Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-12-07r8169: add missing RX enabling for WoL on RTL8125Heiner Kallweit1-1/+1
RTL8125 also requires to enable RX for WoL. v2: add missing Fixes tag Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07vhost/vsock: accept only packets with the right dst_cidStefano Garzarella1-1/+3
When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: phy: dp83867: fix hfs boot in rgmii modeGrygorii Strashko1-48/+71
The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is used in "rgmii-id" mode - the networking stops working. Unfortunately, it's not enough to just move DT parsing code to .probe() as it depends on phydev->interface value, which is set to correct value abter the .probe() is completed and before calling .config_init(). So, RGMII configuration can't be loaded from DT. To fix and issue - move RGMII validation code to .config_init() - parse RGMII parameters in dp83867_of_init(), but consider them as optional. Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: ethernet: ti: cpsw: fix extra rx interruptGrygorii Strashko1-1/+1
Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07pppoe: remove redundant BUG_ON() check in pppoe_pernetAditya Pakki1-2/+0
Passing NULL to pppoe_pernet causes a crash via BUG_ON. Dereferencing net in net_generici() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge tag 'mlx5-fixes-2019-12-05' of ↵David S. Miller10-75/+143
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-12-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.19: ('net/mlx5e: Query global pause state before setting prio2buffer') For -stable v5.3 ('net/mlx5e: Fix SFF 8472 eeprom length') ('net/mlx5e: Fix translation of link mode into speed') ('net/mlx5e: Fix freeing flow with kfree() and not kvfree()') ('net/mlx5e: ethtool, Fix analysis of speed setting') ('net/mlx5e: Fix TXQ indices to be sequential') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06lpc_eth: kernel BUG on removeBruno Carneiro da Cunha1-2/+0
We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez <linux@danielsmartinez.com> Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge tag 'armsoc-fixes' of ↵Linus Torvalds10-24/+158
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes that we've merged late, but for the most part that have been sitting in -next for a while through platform maintainer trees: - Fixes to suspend/resume on Tegra, caused by the added features this merge window - Cleanups and minor fixes to TI additions this merge window - Tee fixes queued up late before the merge window, included here. - A handful of other fixlets There's also a refresh of the shareed config files (multi_v* on 32-bit, and defconfig on 64-bit), to avoid conflicts when we get new contributions" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: multi_v7_defconfig: Restore debugfs support ARM: defconfig: re-run savedefconfig on multi_v* configs arm64: defconfig: re-run savedefconfig ARM: pxa: Fix resource properties soc: mediatek: cmdq: fixup wrong input order of write api soc: aspeed: Fix snoop_file_poll()'s return type MAINTAINERS: Switch to Marvell addresses MAINTAINERS: update Cavium ThunderX drivers Revert "arm64: dts: juno: add dma-ranges property" MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer firmware: arm_scmi: Avoid double free in error flow arm64: dts: juno: Fix UART frequency ARM: dts: Fix sgx sysconfig register for omap4 arm: socfpga: execute cold reboot by default ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs ARM: dts: dra7: fix cpsw mdio fck clock ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity soc/tegra: pmc: Add reset sources and levels on Tegra194 soc/tegra: pmc: Add missing IRQ callbacks on Tegra194 ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 04:03:40 +0000