summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-11-23Merge branch '100GbE' of ↵David S. Miller6-4/+163
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-11-22 Shiraz Saleem says: Currently E800 devices come up as RoCEv2 devices by default. This series add supports for users to configure iWARP or RoCEv2 functionality per PCI function. devlink parameters is used to realize this and is keyed off similar work in [1]. [1] https://lore.kernel.org/linux-rdma/20210810132424.9129-1-parav@nvidia.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23net: marvell: mvpp2: Add support for 5gbase-rMarek Behún1-7/+37
Add support for PHY_INTERFACE_MODE_5GBASER. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23phy: marvell: phy-mvebu-cp110-comphy: add support for 5gbase-rMarek Behún1-0/+9
Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110 common PHY driver. This is currently only supported via SMC calls to TF-A. Legacy support may be added later, if needed. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23tsnep: Fix set MAC addressGerhard Engleder1-1/+1
Commit 4dfb9982644b ("tsn: Fix build.") fixed compilation with const dev_addr. In tsnep_netdev_set_mac_address() the call of ether_addr_copy() was replaced with dev_set_mac_address(), which calls ndo_set_mac_address(). This results in an endless recursive loop because ndo_set_mac_address is set to tsnep_netdev_set_mac_address. Call eth_hw_addr_set() instead of dev_set_mac_address() in ndo_set_mac_address()/tsnep_netdev_set_mac_address() to copy the address as intended. [ 26.563303] Insufficient stack space to handle exception! [ 26.563312] ESR: 0x96000047 -- DABT (current EL) [ 26.563317] FAR: 0xffff80000a507fc0 [ 26.563320] Task stack: [0xffff80000a508000..0xffff80000a50c000] [ 26.563324] IRQ stack: [0xffff80000a0c0000..0xffff80000a0c4000] [ 26.563327] Overflow stack: [0xffff00007fbaf2b0..0xffff00007fbb02b0] [ 26.563333] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60 [ 26.563340] Hardware name: TSN endpoint (DT) [ 26.563343] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 26.563351] pc : inetdev_event+0x4/0x560 [ 26.563364] lr : raw_notifier_call_chain+0x54/0x78 [ 26.563372] sp : ffff80000a508040 [ 26.563374] x29: ffff80000a508040 x28: ffff00000132b800 x27: 0000000000000000 [ 26.563386] x26: 0000000000000000 x25: ffff800000ea5058 x24: 0904030201020001 [ 26.563396] x23: ffff800000ea5058 x22: ffff80000a5080e0 x21: 0000000000000009 [ 26.563405] x20: 00000000fffffffa x19: ffff80000a009510 x18: 0000000000000000 [ 26.563414] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd1341030 [ 26.563422] x14: ffffffffffffffff x13: 0000000000000020 x12: 0101010101010101 [ 26.563432] x11: 0000000000000020 x10: 0101010101010101 x9 : 7f7f7f7f7f7f7f7f [ 26.563441] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff30677364 x6 : 0000000080808080 [ 26.563450] x5 : 0000000000000000 x4 : ffff800008dee170 x3 : ffff80000a50bd42 [ 26.563459] x2 : ffff80000a5080e0 x1 : 0000000000000009 x0 : ffff80000a0092d0 [ 26.563470] Kernel panic - not syncing: kernel stack overflow [ 26.563474] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60 [ 26.563481] Hardware name: TSN endpoint (DT) [ 26.563484] Call trace: [ 26.563486] dump_backtrace+0x0/0x1b0 [ 26.563497] show_stack+0x18/0x68 [ 26.563504] dump_stack_lvl+0x68/0x84 [ 26.563513] dump_stack+0x18/0x34 [ 26.563519] panic+0x164/0x324 [ 26.563524] nmi_panic+0x64/0x98 [ 26.563533] panic_bad_stack+0x108/0x128 [ 2k6.563539] handle_bad_stack+0x38/0x68 [ 26.563548] __bad_stack+0x88/0x8c [ 26.563553] inetdev_event+0x4/0x560 [ 26.563560] call_netdevice_notifiers_info+0x58/0xa8 [ 26.563569] dev_set_mac_address+0x78/0x110 [ 26.563576] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] [ 26.563591] dev_set_mac_address+0xc4/0x110 [ 26.563599] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] ... [ 26.565444] dev_set_mac_address+0xc4/0x110 [ 26.565452] tsnep_netdev_set_mac_address+0x38/0x60 [tsnep] [ 26.565462] dev_set_mac_address+0xc4/0x110 [ 26.565469] dev_set_mac_address_user+0x44/0x68 [ 26.565477] dev_ifsioc+0x30c/0x568 [ 26.565483] dev_ioctl+0x124/0x3f0 [ 26.565489] sock_do_ioctl+0xb4/0xf8 [ 26.565497] sock_ioctl+0x2f4/0x398 [ 26.565503] __arm64_sys_ioctl+0xa8/0xe8 [ 26.565511] invoke_syscall+0x44/0x108 [ 26.565520] el0_svc_common.constprop.3+0x94/0xf8 [ 26.565527] do_el0_svc+0x24/0x88 [ 26.565534] el0_svc+0x20/0x50 [ 26.565541] el0t_64_sync_handler+0x90/0xb8 [ 26.565548] el0t_64_sync+0x180/0x184 [ 26.565556] SMP: stopping secondary CPUs [ 26.565622] Kernel Offset: disabled [ 26.565624] CPU features: 0x0,00004002,00000846 [ 26.565628] Memory Limit: none [ 27.843428] ---[ end Kernel panic - not syncing: kernel stack overflow ]--- Fixes: 4dfb9982644b ("tsn: Fix build.") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23net: dsa: qca8k: add LAG supportAnsuel Smith2-0/+210
Add LAG support to this switch. In Documentation this is described as trunk mode. A max of 4 LAGs are supported and each can support up to 4 port. The current tx mode supported is Hash mode with both L2 and L2+3 mode. When no port are present in the trunk, the trunk is disabled in the switch. When a port is disconnected, the traffic is redirected to the other available port. The hash mode is global and each LAG require to have the same hash mode set. To change the hash mode when multiple LAG are configured, it's required to remove each LAG and set the desired hash mode to the last. An error is printed when it's asked to set a not supported hadh mode. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23net: dsa: qca8k: add support for mirror modeAnsuel Smith2-0/+99
The switch supports mirror mode. Only one port can set as mirror port and every other port can set to both ingress and egress mode. The mirror port is disabled and reverted to normal operation once every port is removed from sending packet to it. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23mctp: Add MCTP-over-serial transport bindingJeremy Kerr3-0/+529
This change adds a MCTP Serial transport binding, as defined by DMTF specificiation DSP0253 - "MCTP Serial Transport Binding". This is implemented as a new serial line discipline, and can be attached to arbitrary tty devices. From the Kconfig description: This driver provides an MCTP-over-serial interface, through a serial line-discipline, as defined by DMTF specification "DSP0253 - MCTP Serial Transport Binding". By attaching the ldisc to a serial device, we get a new net device to transport MCTP packets. This allows communication with external MCTP endpoints which use serial as their transport. It can also be used as an easy way to provide MCTP connectivity between virtual machines, by forwarding data between simple virtual serial devices. Say y here if you need to connect to MCTP endpoints over serial. To compile as a module, use m; the module will be called mctp-serial. Once the N_MCTP line discipline is set [using ioctl(TCIOSETD)], we get a new netdev suitable for MCTP communication. The 'mctp' utility[1] provides a simple wrapper for this ioctl, using 'link serial <device>': # mctp link serial /dev/ttyS0 & # mctp link dev lo index 1 address 0x00:00:00:00:00:00 net 1 mtu 65536 up dev mctpserial0 index 5 address 0x(no-addr) net 1 mtu 68 down [1]: https://github.com/CodeConstruct/mctp Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23mlxsw: pci: Add shutdown method in PCI driverDanielle Ratson1-0/+1
On an arm64 platform with the Spectrum ASIC, after loading and executing a new kernel via kexec, the following trace [1] is observed. This seems to be caused by the fact that the device is not properly shutdown before executing the new kernel. Fix this by implementing a shutdown method which mirrors the remove method, as recommended by the kexec maintainer [2][3]. [1] BUG: Bad page state in process devlink pfn:22f73d page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2ffff00000000000() raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount Modules linked in: CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44 Hardware name: Marvell Armada 7040 TX4810M (DT) Call trace: dump_backtrace+0x0/0x1d0 show_stack+0x1c/0x28 dump_stack+0xbc/0x118 bad_page+0xcc/0xf8 check_free_page_bad+0x80/0x88 __free_pages_ok+0x3f8/0x418 __free_pages+0x38/0x60 kmem_freepages+0x200/0x2a8 slab_destroy+0x28/0x68 slabs_destroy+0x60/0x90 ___cache_free+0x1b4/0x358 kfree+0xc0/0x1d0 skb_free_head+0x2c/0x38 skb_release_data+0x110/0x1a0 skb_release_all+0x2c/0x38 consume_skb+0x38/0x130 __dev_kfree_skb_any+0x44/0x50 mlxsw_pci_rdq_fini+0x8c/0xb0 mlxsw_pci_queue_fini.isra.0+0x28/0x58 mlxsw_pci_queue_group_fini+0x58/0x88 mlxsw_pci_aqs_fini+0x2c/0x60 mlxsw_pci_fini+0x34/0x50 mlxsw_core_bus_device_unregister+0x104/0x1d0 mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48 devlink_reload+0x44/0x158 devlink_nl_cmd_reload+0x270/0x290 genl_rcv_msg+0x188/0x2f0 netlink_rcv_skb+0x5c/0x118 genl_rcv+0x3c/0x50 netlink_unicast+0x1bc/0x278 netlink_sendmsg+0x194/0x390 __sys_sendto+0xe0/0x158 __arm64_sys_sendto+0x2c/0x38 el0_svc_common.constprop.0+0x70/0x168 do_el0_svc+0x28/0x88 el0_sync_handler+0x88/0x190 el0_sync+0x140/0x180 [2] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html [3] https://patchwork.kernel.org/project/linux-scsi/patch/20170212214920.28866-1-anton@ozlabs.org/#20116693 Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23mlxsw: spectrum_router: Remove deadcode in mlxsw_sp_rif_mac_profile_findDanielle Ratson1-3/+0
The function idr_for_each_entry() already checks that the next entry in the IDR is not NULL. Therefore, checking that again in every iteration leads to deadcode. Remove the unnecessary check in order to avoid that. Addresses-Coverity: ("Logically dead code") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22RDMA/irdma: Set protocol based on PF rdma_mode flagShiraz Saleem1-1/+2
Set the RDMA protocol to use at driver bind time based on the ice PF's rdma_mode flag. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-22net/ice: Add support for enable_iwarp and enable_roce devlink paramShiraz Saleem5-3/+161
Allow support for 'enable_iwarp' and 'enable_roce' devlink params to turn on/off iWARP or RoCE protocol support for E800 devices. For example, a user can turn on iWARP functionality with, devlink dev param set pci/0000:07:00.0 name enable_iwarp value true cmode runtime This add an iWARP auxiliary rdma device, ice.iwarp.<>, under this PF. A user request to enable both iWARP and RoCE under the same PF is rejected since this device does not support both protocols simultaneously on the same port. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-22net: dsa: qca8k: add support for mdb_add/delAnsuel Smith1-0/+99
Add support for mdb add/del function. The ARL table is used to insert the rule. The rule will be searched, deleted and reinserted with the port mask updated. The function will check if the rule has to be updated or insert directly with no deletion of the old rule. If every port is removed from the port mask, the rule is removed. The rule is set STATIC in the ARL table (aka it doesn't age) to not be flushed by fast age function. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: add set_ageing_time supportAnsuel Smith2-0/+28
qca8k support setting ageing time in step of 7s. Add support for it and set the max value accepted of 7645m. Documentation talks about support for 10000m but that values doesn't make sense as the value doesn't match the max value in the reg. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: add support for port fast agingAnsuel Smith2-0/+12
The switch supports fast aging by flushing any rule in the ARL table for a specific port. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: add additional MIB counter and make it dynamicAnsuel Smith2-3/+24
We are currently missing 2 additionals MIB counter present in QCA833x switch. QC832x switch have 39 MIB counter and QCA833X have 41 MIB counter. Add the additional MIB counter and rework the MIB function to print the correct supported counter from the match_data struct. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: initial conversion to regmap helperAnsuel Smith1-60/+47
Convert any qca8k set/clear/pool to regmap helper and add missing config to regmap_config struct. Read/write/rmw operation are reworked to use the regmap helper internally to keep the delta of this patch low. These additional function will then be dropped when the code split will be proposed. Ipq40xx SoC have the internal switch based on the qca8k regmap but use mmio for read/write/rmw operation instead of mdio. In preparation for the support of this internal switch, convert the driver to regmap API to later split the driver to common and specific code. The overhead introduced by the use of regamp API is marginal as the internal mdio will bypass it by using its direct access and regmap will be used only by configuration functions or fdb access. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: move regmap init in probe and set it mandatoryAnsuel Smith1-6/+8
In preparation for regmap conversion, move regmap init in the probe function and make it mandatory as any read/write/rmw operation will be converted to regmap API. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: remove extra mutex_init in qca8k_setupAnsuel Smith1-2/+0
Mutex is already init in sw_probe. Remove the extra init in qca8k_setup. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: convert to GENMASK/FIELD_PREP/FIELD_GETAnsuel Smith2-121/+130
Convert and try to standardize bit fields using GENMASK/FIELD_PREP/FIELD_GET macros. Rework some logic to support the standard macro and tidy things up. No functional change intended. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: dsa: qca8k: remove redundant check in parse_port_configAnsuel Smith1-1/+1
The very next check for port 0 and 6 already makes sure we don't go out of bounds with the ports_config delay table. Remove the redundant check. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22skbuff: Switch structure bounds to struct_group()Kees Cook1-3/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Replace the existing empty member position markers "headers_start" and "headers_end" with a struct_group(). This will allow memcpy() and sizeof() to more easily reason about sizes, and improve readability. "pahole" shows no size nor member offset changes to struct sk_buff. "objdump -d" shows no object code changes (outside of WARNs affected by source line number changes). Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> # drivers/net/wireguard/* Link: https://lore.kernel.org/lkml/20210728035006.GD35706@embeddedor Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22hv_netvsc: Use bitmap_zalloc() when applicableChristophe JAILLET1-6/+4
'send_section_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. While at it, change an '== NULL' test into a '!'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22qed: Use the bitmap API to simplify some functionsChristophe JAILLET1-19/+5
'cid_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Also change some 'memset()' into 'bitmap_zero()' to keep consistency. This is also much less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22Fix coverity issue 'Uninitialized scalar variable"Yacov Simhony1-1/+1
There are three boolean variable which were not initialized and later being used in the code. Signed-off-by: Yacov Simhony <ysimhony@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22pcmcia: hide the MAC address helpers if !NETJakub Kicinski1-1/+2
pcmcia_get_mac_from_cis is only called from networking and recent changes made it call dev_addr_mod() which is itself only defined if NET. Reported-by: kernel test robot <lkp@intel.com> Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22tsn: Fix build.David S. Miller1-2/+2
Due to const dev_addr changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: wwan: iosm: device trace collection using relayfsM Chetan Kumar8-13/+271
This patch brings in support for device trace collection. It implements relayfs interface for pushing device trace from kernel space to user space. Driver gets the debugfs base directory associated to WWAN Device and creates trace_control and trace debugfs for device tracing. Both trace_control & trace debugfs are created under /sys/kernel/debug/wwan/wwan0/. In order to collect device trace on trace0 interface, user need to write 1 to trace_ctl interface. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: wwan: common debugfs base dir for wwan deviceM Chetan Kumar1-2/+28
This patch set brings in a common debugfs base directory i.e. /sys/kernel/debugfs/wwan/ in WWAN Subsystem for a WWAN device instance. So that it avoids driver polluting debugfs root with unrelated directories & possible name collusion. Having a common debugfs base directory for WWAN drivers eases user to match control devices with debugfs entries. WWAN Subsystem creates dentry (/sys/kernel/debugfs/wwan) on module load & removes dentry on module unload. When driver registers a new wwan device, dentry (wwanX) is created for WWAN device instance & on driver unregister dentry is removed. New API is introduced to return the wwan device instance dentry so that driver can create debugfs entries under it. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22octeon: constify netdev->dev_addrJakub Kicinski1-1/+1
Argument of a helper is missing a const. Reported-by: kernel test robot <lkp@intel.com> Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: mana: Add XDP supportHaiyang Zhang4-11/+235
Add support of XDP for the MANA driver. Supported XDP actions: XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED XDP actions not yet supported: XDP_REDIRECT Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22tsnep: Add TSN endpoint Ethernet MAC driverGerhard Engleder11-0/+3511
The TSN endpoint Ethernet MAC is a FPGA based network device for real-time communication. It is integrated as Ethernet controller with ethtool and PTP support. For real-time communcation TC_SETUP_QDISC_TAPRIO is supported. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: phylink: handle NA interface mode in phylink_fwnode_phy_connect()Russell King (Oracle)1-1/+8
Commit 4904b6ea1f9db ("net: phy: phylink: Use PHY device interface if N/A") introduced handling for the phy interface mode where this is not known at phylink creation time. This was never added to the OF/fwnode paths, but is necessary when the phy is present in DT, but the phy-mode is not specified. Add this handling. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: phylink: Add helpers for c22 registers without MDIOSean Anderson1-44/+60
Some devices expose memory-mapped c22-compliant PHYs. Because these devices do not have an MDIO bus, we cannot use the existing helpers. Refactor the existing helpers to allow supplying the values for c22 registers directly, instead of using MDIO to access them. Only get_state and set_advertisement are converted, since they contain the most complex logic. Because set_advertisement is never actually used outside phylink_mii_c22_pcs_config, move the MDIO-writing part into that function. Because some modes do not need the advertisement register set at all, we use -EINVAL for this purpose. Additionally, a new function phylink_pcs_enable_an is provided to determine whether to enable autonegotiation. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet17-22/+22
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_sizeEric Dumazet7-10/+10
dev->gso_max_size is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: hns3: remove the way to set tx spare buf via module parameterHao Chen1-6/+1
The way to set tx spare buf via module parameter is not such convenient as the way to set it via ethtool. So,remove the way to set tx spare buf via module parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: hns3: add support to set/get rx buf len via ethtool for hns3 driverHao Chen1-8/+44
Rx buf len is for rx BD buffer size, support setting it via ethtool -G parameter and getting it via ethtool -g parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen94-201/+589
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 ↵Hao Chen3-2/+60
driver Tx copybreak buf size is used for tx copybreak feature, the feature is used for small size packet or frag. It adds a queue based tx shared bounce buffer to memcpy the small packet when the len of xmitted skb is below tx_copybreak(value to distinguish small size and normal size), and reduce the overhead of dma map and unmap when IOMMU is on. Support setting it via ethtool --set-tunable parameter and getting it via ethtool --get-tunable parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-20bnx2x: constify static inline stub for dev_addrJakub Kicinski1-1/+1
bnx2x_vfpf_config_mac() was constified by not its stub. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-2082596: use eth_hw_addr_set()Jakub Kicinski1-1/+2
Byte by byte assignments. Fixes build on m68k. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19net: phy: add support for TI DP83561-SP phyHari Nagalla1-20/+22
Add support for the TI DP83561-SP Gigabit ethernet phy device. The dp83561-sp is a radiation hardened space grade gigabit ethernet PHY. It has been tested for single event latch upto 121 MeV, the critical reliability parameter for space designs. It interfaces directly to twisted pair media through an external transformer. And the device also interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII. DP83867, DP83869 and DP83561-SP, all these parts support 1000Base-T/ 100Base-TX/ and 10Base-Te standards and have similar register map for the core functionality. The data sheet for this part is at https://www.ti.com/product/DP83561-SP Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Geet Modi <geet.modi@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211118102532.9835-1-hnagalla@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-19ethernet: renesas: Use div64_ul instead of do_divYang Li1-4/+2
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Eliminate the following coccicheck warning: ./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-19nfp: flower: correction of error handlingYu Xiao1-20/+0
Removing reduplicated error handling when running into error path of `nfp_compile_flow_metadata`. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19sky2: use PCI VPD API in eeprom ethtool opsHeiner Kallweit1-72/+12
Recently pci_read/write_vpd_any() have been added to the PCI VPD API. These functions allow to access VPD address space outside the auto-detected VPD, and they can be used to significantly simplify the eeprom ethtool ops. Tested with a 88E8070 card with 1KB EEPROM. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19net: ipa: Use 'for_each_clear_bit' when possibleChristophe JAILLET1-3/+1
Use 'for_each_clear_bit()' instead of hand writing it. It is much less version. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19bnx2x: Use struct_group() for memcpy() regionKees Cook2-7/+14
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct nig_stats around members egress_mac_pkt0_lo, egress_mac_pkt0_hi, egress_mac_pkt1_lo, and egress_mac_pkt1_hi (and the respective members in struct bnx2x_eth_stats), so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of struct bnx2x_eth_stats's rx_stat_ifhcinbadoctets_hi. "pahole" shows no size nor member offset changes to either struct. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Additionally adds BUILD_BUG_ON() to compare the separate struct group sizes. Reviewed-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Link: https://lore.kernel.org/lkml/DM5PR18MB2229B0413C372CC6E49D59A3B2C59@DM5PR18MB2229.namprd18.prod.outlook.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19cxgb4: Use struct_group() for memcpy() regionKees Cook3-12/+13
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct fw_eth_tx_pkt_vm_wr around members ethmacdst, ethmacsrc, ethtype, and vlantci, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of ethmacdst. "pahole" shows no size nor member offset changes to struct fw_eth_tx_pkt_vm_wr. "objdump -d" shows no object code changes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19cxgb3: Use struct_group() for memcpy() regionKees Cook1-3/+6
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct rss_hdr around members imm_data and intr_gen, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of imm_data. "pahole" shows no size nor member offset changes to struct rss_hdr. "objdump -d" shows no object code changes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19net: phylink: add 1000base-KX to phylink_caps_to_linkmodes()Russell King (Oracle)1-0/+1
1000base-KX was missed in phylink_caps_to_linkmodes(), add it. This will be necessary to convert stmmac with xpcs to ensure we don't drop any supported linkmodes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 03:58:54 +0000