summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-04-26Merge branch 'sh/stable-updates'Paul Mundt2629-2584/+21396
Conflicts: arch/sh/kernel/dwarf.c drivers/dma/shdma.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26SH: fix error paths in DMA driverGuennadi Liakhovetski1-6/+21
If channel allocation is failing, mark the channel unused and give PM a chance to power down the hardware. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26SH: constify multiple DMA related objects and references to themGuennadi Liakhovetski1-5/+7
Lists of DMA channels and slaves are not changed, make them constant. Besides, SH7724 channel and slave configuration of both DMA controllers is identical, remove the extra copy of the configuration data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-2/+8
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipv6: Fix inet6_csk_bind_conflict() e100: Fix the TX workqueue race
2010-04-24e100: Fix the TX workqueue raceAlan Cox1-2/+8
Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-24Merge branch 'fixes' of ↵Linus Torvalds2-7/+20
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] use max load in conservative governor [CPUFREQ] fix a lockdep warning
2010-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds18-39/+644
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits) gianfar: Fix potential oops during OF address translation fsl_pq_mdio: Fix kernel oops during OF address translation tcp: bind() fix when many ports are bound rdma: potential ERR_PTR dereference rtnetlink: potential ERR_PTR dereference net: ipv6 bind to device issue ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU drivers/net/usb: Add new driver ipheth cxgb3: fix linkup issue X25 fix dead unaccepted sockets KS8851: NULL pointer dereference if list is empty net: 3c574_cs fix stats.tx_bytes counter xfrm6: ensure to use the same dev when building a bundle can: Fix possible NULL pointer dereference in ems_usb.c net: Fix an RCU warning in dev_pick_tx() ipv6: Fix tcp_v6_send_response transport header setting. bridge: add a missing ntohs() 8139too: Fix a typo in the function name. mac80211: pass HT changes to driver when off channel mac80211: remove bogus TX agg state assignment ...
2010-04-24Merge branch 'for-linus' of ↵Linus Torvalds3-23/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Ensure we re-enable devices on resume x86/PCI: parse additional host bridge window resource types PCI: revert broken device warning PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions
2010-04-24Merge branch 'for_linus' of ↵Linus Torvalds5-46/+302
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: eeepc-laptop: add missing sparse_keymap_free eeepc-wmi: Build fix asus: don't modify bluetooth/wlan on boot dell-wmi: Fix memory leak eeepc-wmi: add backlight support eeepc-wmi: use a platform device as parent device of all sub-devices eeepc-wmi: add an eeepc_wmi context structure
2010-04-24VMware Balloon driverDmitry Torokhov3-0/+849
This is a standalone version of VMware Balloon driver. Ballooning is a technique that allows hypervisor dynamically limit the amount of memory available to the guest (with guest cooperation). In the overcommit scenario, when hypervisor set detects that it needs to shuffle some memory, it instructs the driver to allocate certain number of pages, and the underlying memory gets returned to the hypervisor. Later hypervisor may return memory to the guest by reattaching memory to the pageframes and instructing the driver to "deflate" balloon. We are submitting a standalone driver because KVM maintainer (Avi Kivity) expressed opinion (rightly) that our transport does not fit well into virtqueue paradigm and thus it does not make much sense to integrate with virtio. There were also some concerns whether current ballooning technique is the right thing. If there appears a better framework to achieve this we are prepared to evaluate and switch to using it, but in the meantime we'd like to get this driver upstream. We want to get the driver accepted in distributions so that users do not have to deal with an out-of-tree module and many distributions have "upstream first" requirement. The driver has been shipping for a number of years and users running on VMware platform will have it installed as part of VMware Tools even if it will not come from a distribution, thus there should not be additional risk in pulling the driver into mainline. The driver will only activate if host is VMware so everyone else should not be affected at all. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Cc: Avi Kivity <avi@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24w1: fix omap 1-wire driver compilationAmit Kucheria1-0/+1
Fixes the following error: drivers/w1/masters/omap_hdq.c: In function 'hdq_wait_for_flag': drivers/w1/masters/omap_hdq.c:137: error: implicit declaration of function 'schedule_timeout_uninterruptible' drivers/w1/masters/omap_hdq.c: In function 'hdq_write_byte': drivers/w1/masters/omap_hdq.c:177: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) drivers/w1/masters/omap_hdq.c:177: error: (Each undeclared identifier is reported only once drivers/w1/masters/omap_hdq.c:177: error: for each function it appears in.) drivers/w1/masters/omap_hdq.c:177: error: implicit declaration of function 'schedule_timeout' drivers/w1/masters/omap_hdq.c: In function 'hdq_isr': drivers/w1/masters/omap_hdq.c:221: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/w1/masters/omap_hdq.c: In function 'omap_hdq_break': drivers/w1/masters/omap_hdq.c:316: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24w1: w1 temp: fix negative termperature calculationIan Dall1-3/+2
Fix regression caused by commit 507e2fbaaacb6f164b4125b87c5002f95143174b ("w1: w1 temp calculation overflow fix") whereby negative temperatures for the DS18B20 are not converted properly. When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are both well within the -55 - +125 degree range for the sensor. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=12646 Signed-of-by: Ian Dall <ian@beware.dropbear.id.au> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Tested-by: Karsten Elfenbein <kelfe@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24drivers/video/efifb.c: support framebuffer for NVIDIA 9400M in MacBook Pro 5,1Thomas Gerlach1-0/+3
Description of patch: --------------------- This is a patch for the EFI framebuffer driver to enable the framebuffer of the NVIDIA 9400M as found in MacBook Pro (MBP) 5,1 and up. The framebuffer of the NVIDIA graphic cards are located at the following addresses in memory: 9400M: 0xC0010000 9600M GT: 0xB0030000 The patch delivered right here only provides the memory location of the framebuffer of the 9400M device. The 9600M GT is not covered. It is assumed that the 9400M is used when powered up the MBP. The information which device is currently powered and in use is stored in the 64 bytes large EFI variable "gpu-power-prefs". More specifically, byte 0x3B indicates whether 9600M GT (0x00) or 9400M (0x01) is online. The PCI bus IDs are the following: 9400M: PCI 03:00:00 9600M GT: PCI 02:00:00 The EFI variables can be easily read-out and manipulated with "rEFIt", an MBP specific bootloader tool. For more information on how handle rEFIt and EFI variables please consult "http://refit.sourceforge.net" and "http://ubuntuforums.org/archive/index.php/t-1076879.html". IMPORTANT NOTE: The information on how to activate the 9400M device given at "ubuntuforums.org" is not correct, since it states gpu-power-prefs[0x3B] = 0x00 -> 9400M (PCI 02:00:00) gpu-power-prefs[0x3B] = 0x01 -> 9600M GT (PCI 03:00:00) Actually, the assignment of the values and the PCI bus IDs are swapped. Suggestions: ------------ To cover framebuffers of both 9400M and 9600M GT, I would suggest to implement a conditional on "gpu-power-prefs". Depending on the value of byte 0x3B, the according framebuffer is selected. However, this requires kernel access to the EFI variables. [akpm@linux-foundation.org: rename optname, per Peter Jones] Signed-off-by: Thomas Gerlach <t.m.gerlach@freenet.de> Acked-by: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24lis3: add support for HP ProBook 432x/442x/452x/522xTakashi Iwai1-0/+4
Correct axis-mappings for new HP ProBook laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24mtd: fix Orion NAND driver compilation with ARM OABIPaulius Zaleckas1-1/+7
We must tell GCC to use even register for variable passed to ldrd instruction. Without this patch GCC 4.2.1 puts this variable to r2/r3 on EABI and r3/r4 on OABI, so force it to r2/r3. This does not change anything when EABI and OABI compilation works OK. Without this patch and with OABI I get: CC drivers/mtd/nand/orion_nand.o /tmp/ccMkwOCs.s: Assembler messages: /tmp/ccMkwOCs.s:63: Error: first destination register must be even -- `ldrd r3,[ip]' make[5]: *** [drivers/mtd/nand/orion_nand.o] Error 1 Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-23gianfar: Fix potential oops during OF address translationAnton Vorontsov1-5/+1
gianfar driver may pass NULL pointer to the of_translate_address(), which may lead to a kernel oops. Fix this by using of_iomap(), which is also much simpler and shorter. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23fsl_pq_mdio: Fix kernel oops during OF address translationAnton Vorontsov1-6/+14
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23eeepc-laptop: add missing sparse_keymap_freeCorentin Chary1-2/+1
Also remove legacy keymap which was not used since we use sparse_keymap. Signed-off-by: Corentin Chary <corentincj@iksaif.net>
2010-04-23drm/i915: fix non-Ironlake 965 class crashesJesse Barnes1-1/+1
My PIPE_CONTROL fix (just sent via Eric's tree) was buggy; I was testing a whole set of patches together and missed a conversion to the new HAS_PIPE_CONTROL macro, which will cause breakage on non-Ironlake 965 class chips. Fortunately, the fix is trivial and has been tested. Be sure to use the HAS_PIPE_CONTROL macro in i915_get_gem_seqno, or we'll end up reading the wrong graphics memory, likely causing hangs, crashes, or worse. Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22Merge branch 'upstream-linus' of ↵Linus Torvalds3-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: ensure NCQ error result taskfile is fully initialized before returning it via qc->result_tf. libata: fix docs, RE port and device of libata.force ID separated by point pata_pcmcia/ide-cs: add IDs for transcend and kingston cards libata: fix locking around blk_abort_request()
2010-04-22libata: ensure NCQ error result taskfile is fully initializedJeff Garzik1-0/+1
before returning it via qc->result_tf. Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-22pata_pcmcia/ide-cs: add IDs for transcend and kingston cardsKristoffer Ericson2-0/+8
This patch adds idstrings for Kingston 1GB/4GB and Transcend 4GB/8GB. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-22libata: fix locking around blk_abort_request()Tejun Heo1-0/+4
blk_abort_request() expectes queue lock to be held by the caller. Grab it before calling the function. Lack of this synchronization led to infinite loop on corrupt q->timeout_list. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds16-30/+139
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: usb: Increase timeout value for device reset USB: put claimed interfaces in the "suspended" state USB: EHCI: defer reclamation of siTDs USB: fix remote wakeup settings during system sleep USB: pl2303: add AdLink ND-6530 USB IDs USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem. USB: OHCI: DA8xx/OMAP-L1x: fix up macro rename USB: qcaux: add LG Rumor and Sanyo Katana LX device IDs usb: wusb: don't overflow the Keep Alive IE buffer USB: ehci: omap: fix kernel panic with rmmod USB: fixed bug in usbsevseg using USB autosuspend incorrectly USB: ti_usb_3410_5052: adding multitech dialup fax/modem devices
2010-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds1-0/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: use sysfs_attr_init in ASUS atk0110 driver Documentation/HOWTO: update git home URL Documentation: -stable rules: upstream commit ID requirement reworded
2010-04-22Merge branch 'for-linus' of ↵Linus Torvalds9-42/+246
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy Bridge drm/i915: cleanup FBC buffers at unload time drm/i915: fix tiling limits for i915 class hw v2 drm/i915: set DIDL using the ACPI video output device _ADR method return. drm/i915: Fix 82854 PCI ID, and treat it like other 85X drm/i915: Attempt to fix watermark setup on 85x (v2)
2010-04-22Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-17/+18
* 'for-linus' of git://neil.brown.name/md: md/raid5: fix previous patch.
2010-04-22PCI: Ensure we re-enable devices on resumeMatthew Garrett1-5/+1
If the firmware puts a device back into D0 state at resume time, we'll update its state in resume_noirq and thus skip the platform resume code. Calling that code twice should be safe and we ought to avoid getting to that point anyway, so remove the check and also allow the platform pci code to be called for D0. Fixes USB not being powered after resume on recent Lenovo machines. Acked-by: Alex Chiang <achiang@canonical.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-22PCI: revert broken device warningBjorn Helgaas1-16/+7
This reverts c519a5a7dab2d. That change added a warning about devices that didn't respond correctly when sizing BARs, which helped diagnose broken devices. But the test wasn't specific enough, so it also complained about working devices with zero-size BARs, e.g., https://bugzilla.kernel.org/show_bug.cgi?id=15822 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-22sysfs: use sysfs_attr_init in ASUS atk0110 driverJiri Kosina1-0/+4
Annotate dynamic sysfs attribute in atk_create_files(). This gets rid of the following lockdep warning: BUG: key ffff8800379ca670 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2696 lockdep_init_map+0xd2/0x108() Hardware name: P5K PRO Modules linked in: asus_atk0110(+) pata_acpi firewire_ohci ata_generic dm_multipath firewire_core crc_itu_t pata_marvell floppy Pid: 599, comm: modprobe Not tainted 2.6.34-rc4 #27 Call Trace: [<ffffffff8104cdb0>] warn_slowpath_common+0x7c/0x94 [<ffffffff8104cddc>] warn_slowpath_null+0x14/0x16 [<ffffffff81077c4d>] lockdep_init_map+0xd2/0x108 [<ffffffff81165873>] sysfs_add_file_mode+0x66/0xa2 [<ffffffff811658c0>] sysfs_add_file+0x11/0x13 [<ffffffff8116594b>] sysfs_create_file+0x2a/0x2c [<ffffffff812c1f9c>] device_create_file+0x19/0x1b [<ffffffffa005b4fd>] atk_add+0x58b/0x72e [asus_atk0110] [<ffffffff812572a1>] acpi_device_probe+0x50/0x122 [<ffffffff812c46af>] driver_probe_device+0xa2/0x127 [<ffffffff812c4783>] __driver_attach+0x4f/0x6b [<ffffffff812c4734>] ? __driver_attach+0x0/0x6b [<ffffffff812c3c94>] bus_for_each_dev+0x59/0x8e [<ffffffff812c4519>] driver_attach+0x1e/0x20 [<ffffffff812c4152>] bus_add_driver+0xb9/0x207 [<ffffffff812c4a5f>] driver_register+0x9d/0x10e [<ffffffffa005f000>] ? atk0110_init+0x0/0x31 [asus_atk0110] [<ffffffff81257c7c>] acpi_bus_register_driver+0x43/0x45 [<ffffffffa005f015>] atk0110_init+0x15/0x31 [asus_atk0110] [<ffffffffa005f000>] ? atk0110_init+0x0/0x31 [asus_atk0110] [<ffffffff81002069>] do_one_initcall+0x5e/0x15e [<ffffffff81085075>] sys_init_module+0xd8/0x239 [<ffffffff81009cf2>] system_call_fastpath+0x16/0x1b ---[ end trace 4d0c84007055efb9 ]--- BUG: key ffff8800379ca638 not in .data! BUG: key ffff8800379ca6a8 not in .data! BUG: key ffff8800379ca6e0 not in .data! BUG: key ffff880036f73670 not in .data! BUG: key ffff880036f73638 not in .data! BUG: key ffff880036f736a8 not in .data! BUG: key ffff880036f736e0 not in .data! BUG: key ffff880036f76c70 not in .data! BUG: key ffff880036f76c38 not in .data! BUG: key ffff880036f76ca8 not in .data! BUG: key ffff880036f76ce0 not in .data! BUG: key ffff8800368e7670 not in .data! BUG: key ffff8800368e7638 not in .data! BUG: key ffff8800368e76a8 not in .data! BUG: key ffff8800368e76e0 not in .data! BUG: key ffff880036ef7670 not in .data! BUG: key ffff880036ef7638 not in .data! BUG: key ffff880036ef76a8 not in .data! BUG: key ffff880036ef76e0 not in .data! BUG: key ffff8800373ccc70 not in .data! BUG: key ffff8800373ccc38 not in .data! BUG: key ffff8800373ccca8 not in .data! BUG: key ffff8800373ccce0 not in .data! BUG: key ffff880037a60870 not in .data! BUG: key ffff880037a60838 not in .data! BUG: key ffff880037a608a8 not in .data! BUG: key ffff880037a608e0 not in .data! BUG: key ffff880037355070 not in .data! BUG: key ffff880037355038 not in .data! BUG: key ffff8800373550a8 not in .data! BUG: key ffff8800373550e0 not in .data! BUG: key ffff8800378c2670 not in .data! BUG: key ffff8800378c2638 not in .data! BUG: key ffff8800378c26a8 not in .data! BUG: key ffff8800378c26e0 not in .data! BUG: key ffff880036ef7e70 not in .data! BUG: key ffff880036ef7e38 not in .data! BUG: key ffff880036ef7ea8 not in .data! BUG: key ffff880036ef7ee0 not in .data! Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22usb: Increase timeout value for device resetDinh Nguyen1-1/+1
It seems that for USB IP on Freescale MX5x processors, it needs >750 usec for the reset to complete. This change should not hurt any other EHCI hardware. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: put claimed interfaces in the "suspended" stateAlan Stern1-6/+7
This patch (as1370) fixes a bug in the USB runtime power management code. When a driver claims an interface, it doesn't expect to need to call usb_autopm_get_interface() or usb_autopm_put_interface() for runtime PM to work. Runtime PM can be controlled by the driver's primary interface; the additional interfaces it claims shouldn't interfere. As things stand, the claimed interfaces will prevent the device from autosuspending. To fix this problem, the patch sets interfaces to the suspended state when they are claimed. Also, although in theory this shouldn't matter, the patch changes the suspend code so that interfaces are suspended in reverse order from detection and resuming. This is how the PM core works, and we ought to use the same approach. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Debugged-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: EHCI: defer reclamation of siTDsAlan Stern4-12/+36
This patch (as1369) fixes a problem in ehci-hcd. Some controllers occasionally run into trouble when the driver reclaims siTDs too quickly. This can happen while streaming audio; it causes the controller to crash. The patch changes siTD reclamation to work the same way as iTD reclamation: Completed siTDs are stored on a list and not reused until at least one frame has passed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nate Case <ncase@xes-inc.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fix remote wakeup settings during system sleepAlan Stern1-1/+35
This patch (as1363) changes the way USB remote wakeup is handled during system sleeps. It won't be enabled unless an interface driver specifically needs it. Also, it won't be enabled during the FREEZE or QUIESCE phases of hibernation, when the system doesn't respond to wakeup events anyway. Finally, if the device is already runtime-suspended with remote wakeup enabled, but wakeup is supposed to be disabled for the system sleep, the device gets woken up so that it can be suspended again with the proper wakeup setting. This will fix problems people have reported with certain USB webcams that generate wakeup requests when they shouldn't, and as a result cause system suspends to fail. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/515109 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Erik Andrén <erik.andren@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: pl2303: add AdLink ND-6530 USB IDsManuel Jander2-0/+5
I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485 isolated adapter is actually a PL2303 based usb serial adapter. I tried it out, and as far as I can tell it works. Signed-off-by: Manuel Jander <manuel.jander@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.William Lightning1-0/+1
Signed-off-by: William Lightning <kassah@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: OHCI: DA8xx/OMAP-L1x: fix up macro renameSergei Shtylyov1-1/+1
It appears that the DA8xx/OMAP-L1x glue layer went into the kernel uncompilable: commit 1960e693ac12ae5fe518309d6a63a44c93fad9e7 (davinci: da8xx/omapl1: add support for the second sysconfig module) has renamed DA8XX_SYSCFG_* macros to DA8XX_SYSCFG0_* and it's been committed before the glue layer... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: qcaux: add LG Rumor and Sanyo Katana LX device IDsDan Williams1-0/+10
These phones also have the familiar ttyACM0/ttyUSB0 schizophrenia when placed into "Dial-up Networking" mode after connecting a USB cable. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22usb: wusb: don't overflow the Keep Alive IE bufferDavid Vrabel1-1/+1
The Keep Alive IE only has space for WUIE_ELT_MAX (== 4) device addresses. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ehci: omap: fix kernel panic with rmmodAjay Kumar Gupta1-2/+4
Sets the regulator values to NULL if they are not defined. This is required to fix the kernel panic in exit path when EHCI module is removed on the platforms where EHCI regulator are not set. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fixed bug in usbsevseg using USB autosuspend incorrectlyHarrison Metzger1-2/+13
This patch fixes a bug with the usbsevseg driver which assumed that USB autosuspend will always be used. Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ti_usb_3410_5052: adding multitech dialup fax/modem devicesAlex Manoussakis2-4/+25
The following patch adds support for Multitech Systems' MT9234MU and MT9234ZBA usb dialup fax modems. It is based on a patch and firmware provided to me by Multitech Systems' support, after I reported to them that my MT9234MU modem was not working with recent linux kernels. Signed-off-by: Alex Manoussakis <alex@juniper.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy BridgeJesse Barnes4-16/+152
Since 965, the hardware has supported the PIPE_CONTROL command, which provides fine grained GPU cache flushing control. On recent chipsets, this instruction is required for reliable interrupt and sequence number reporting in the driver. So add support for this instruction, including workarounds, on Ironlake and Sandy Bridge hardware. https://bugs.freedesktop.org/show_bug.cgi?id=27108 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-23md/raid5: fix previous patch.NeilBrown1-17/+18
Previous patch changes stripe and chunk_number to sector_t but mistakenly did not update all of the divisions to use sector_dev(). This patch changes all the those divisions (actually the '%' operator) to sector_div. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2010-04-22drm/i915: cleanup FBC buffers at unload timeJesse Barnes2-0/+17
This keeps the memory manager from complaining when we take it down. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-22Merge branch 'for-linus' of ↵Linus Torvalds2-13/+24
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: wait for local CSR lock access to finish firewire: ohci: prevent aliasing of locally handled register addresses firewire: core: fw_iso_resource_manage: return -EBUSY when out of resources firewire: core: fix retries calculation in iso manage_channel() firewire: cdev: fix cut+paste mistake in disclaimer
2010-04-22scsi: fix operator precedence warningRandy Dunlap1-1/+1
Fix operator precedence warning (from sparse), which results in the data value always being 0: drivers/scsi/qla4xxx/ql4_mbx.c:470:66: warning: right shift by bigger than source value Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ravi Anand <ravi.anand@qlogic.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Cc: Karen Higgins <karen.higgins@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds8-41/+42
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] zcore: Fix reipl device detection [S390] vdso: use ntp adjusted clock multiplier [S390] cio: use exception-save stsch [S390] add hook to reenable mss after hibernation [S390] cio: allow enable_facility from outside init functions [S390] dasd: fix endless loop in erp
2010-04-22[S390] zcore: Fix reipl device detectionMichael Holzheu1-5/+1
The reipl device information is passed from the kernel to zfcpdump using a pointer in the lowcore (0xe00) that points to the reipl information Currently if that pointer is not zero, we copy the reipl information. If the pointer is not initialized and points outside the accessible memory, it can happen that the memory copy fails. In that case we currently stop the initialization of zcore which leads to a failing kernel dump. The correct behavior is to disable the reipl after dump and continue with zcore intialization. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] cio: use exception-save stschSebastian Ott3-11/+11
Using stsch on schids with ssid != 0 can lead to an operand exception. Use stsch_err to handle potential exceptions if we fail to reenable mss after hibernation. Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 04:44:22 +0000