summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-21xen/acpi: upload _PSD info for non Dom0 CPUs tooJoao Martins2-6/+29
All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and changing only the acpi_id. For processors which P-state coordination type is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information (_PSD), because Xen will ignore any cpufreq domains created for past CPUs. Albeit for platforms which expose coordination types as SW_ANY or SW_ALL, this will have some unintended side effects. Effectively, it will look at the P-state domain existence and *if it already exists* it will skip the acpi-cpufreq initialization and thus inherit the policy from the first CPU in the cpufreq domain. This will finally lead to the original cpu not changing target freq to P0 other than the first in the domain. Which will make turbo boost not getting enabled (e.g. for 'performance' governor) for all cpus. This patch fixes that, by also evaluating _PSD when we enumerate all ACPI processors and thus always uploading the correct info to Xen. We export acpi_processor_get_psd() for that this purpose, but change signature to not assume an existent of acpi_processor given that ACPI isn't creating an acpi_processor for non-dom0 CPUs. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_ENDSimon Gaiser1-3/+11
By guaranteeing that the argument of XS_TRANSACTION_END is valid we can assume that the transaction has been closed when we get an XS_ERROR response from xenstore (Note that we already verify that it's a valid transaction id). Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus: Catch closing of non existent transactionsSimon Gaiser1-1/+3
Users of the xenbus functions should never close a non existent transaction (for example by trying to closing the same transaction twice) but better catch it in xs_request_exit() than to corrupt the reference counter. Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handlingSimon Gaiser1-1/+1
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") made a subtle change to the semantic of xenbus_dev_request_and_reply() and xenbus_transaction_end(). Before on an error response to XS_TRANSACTION_END xenbus_dev_request_and_reply() would not decrement the active transaction counter. But xenbus_transaction_end() has always counted the transaction as finished regardless of the response. The new behavior is that xenbus_dev_request_and_reply() and xenbus_transaction_end() will always count the transaction as finished regardless the response code (handled in xs_request_exit()). But xenbus_dev_frontend tries to end a transaction on closing of the device if the XS_TRANSACTION_END failed before. Trying to close the transaction twice corrupts the reference count. So fix this by also considering a transaction closed if we have sent XS_TRANSACTION_END once regardless of the return code. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-21/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three fixes for irq chip drivers: - Make sure the allocations in the GIC-V3 ITS driver are large enough to accomodate the interrupt space - Fix a misplaced __iomem annotation which causes a splat of 26 sparse warnings - Remove an unused function in the IMX GPCV2 driver which causes build warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-imx-gpcv2: Remove unused function irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis irqchip/gic-v3-its: Fix misplaced __iomem annotations
2018-03-18Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Thomas Gleixner: "A single fix to prevent partially initialized pointers in mixed mode (64bit kernel on 32bit UEFI)" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/tpm: Initialize pointer variables to zero for mixed mode
2018-03-16Merge tag 'drm-fixes-for-v4.16-rc6' of ↵Linus Torvalds21-50/+169
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "i915, amd and nouveau fixes. i915: - backlight fix for some panels - pm fix - fencing fix - some GVT fixes amdgpu: - backlight fix across suspend/resume - object destruction ordering issue fix - displayport fix nouveau: - two backlight fixes - fix for some lockups Pretty quiet week, seems like everyone was fixing backlights" * tag 'drm-fixes-for-v4.16-rc6' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/bl: fix backlight regression drm/nouveau/bl: Fix oops on driver unbind drm/nouveau/mmu: ALIGN_DOWN correct variable drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field drm/i915/gvt: Correct the privilege shadow batch buffer address drm/amdgpu/dce: Don't turn off DP sink when disconnected drm/amdgpu: save/restore backlight level in legacy dce code drm/radeon: fix prime teardown order drm/amdgpu: fix prime teardown order drm/i915: Kick the rps worker when changing the boost frequency drm/i915: Only prune fences after wait-for-all drm/i915: Enable VBT based BL control for DP drm/i915/gvt: keep oa config in shadow ctx drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
2018-03-16Merge tag 'drm-intel-fixes-2018-03-15' of ↵Dave Airlie4-4/+82
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only GVT fixes: - Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu) - OA context fix for vGPU profiling (Min) - privilege batch buffer reloc fix (Fred) * tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field drm/i915/gvt: Correct the privilege shadow batch buffer address drm/i915/gvt: keep oa config in shadow ctx drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
2018-03-16Merge branch 'linux-4.16' of git://github.com/skeggsb/linux into drm-fixesDave Airlie2-8/+8
nouveau regression fixes. * 'linux-4.16' of git://github.com/skeggsb/linux: drm/nouveau/bl: fix backlight regression drm/nouveau/bl: Fix oops on driver unbind drm/nouveau/mmu: ALIGN_DOWN correct variable
2018-03-16drm/nouveau/bl: fix backlight regressionKarol Herbst1-5/+5
Fixes: 3c66c87dc9 ("drm/nouveau/disp: remove hw-specific customisation of output paths") Suggested-by: Ben Skeggs <skeggsb@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-03-16drm/nouveau/bl: Fix oops on driver unbindLukas Wunner1-2/+2
Unbinding nouveau on a dual GPU MacBook Pro oopses because we iterate over the bl_connectors list in nouveau_backlight_exit() but skipped initializing it in nouveau_backlight_init(). Stacktrace for posterity: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: nouveau_backlight_exit+0x2b/0x70 [nouveau] nouveau_display_destroy+0x29/0x80 [nouveau] nouveau_drm_unload+0x65/0xe0 [nouveau] drm_dev_unregister+0x3c/0xe0 [drm] drm_put_dev+0x2e/0x60 [drm] nouveau_drm_device_remove+0x47/0x70 [nouveau] pci_device_remove+0x36/0xb0 device_release_driver_internal+0x157/0x220 driver_detach+0x39/0x70 bus_remove_driver+0x51/0xd0 pci_unregister_driver+0x2a/0xa0 nouveau_drm_exit+0x15/0xfb0 [nouveau] SyS_delete_module+0x18c/0x290 system_call_fast_compare_end+0xc/0x6f Fixes: b53ac1ee12a3 ("drm/nouveau/bl: Do not register interface if Apple GMUX detected") Cc: stable@vger.kernel.org # v4.10+ Cc: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-03-16drm/nouveau/mmu: ALIGN_DOWN correct variableMāris Nartišs1-1/+1
Commit 7110c89bb8852ff8b0f88ce05b332b3fe22bd11e ("mmu: swap out round for ALIGN") replaced two calls to round/rounddown with ALIGN/ALIGN_DOWN, but erroneously applied ALIGN_DOWN to a different variable (addr) and left intended variable (tail) not rounded/ALIGNed. As a result screen corruption, X lockups are observable. An example of kernel log of affected system with NV98 card where it was bisected: nouveau 0000:01:00.0: gr: TRAP_M2MF 00000002 [IN] nouveau 0000:01:00.0: gr: TRAP_M2MF 00320951 400007c0 00000000 04000000 nouveau 0000:01:00.0: gr: 00200000 [] ch 1 [000fbbe000 DRM] subc 4 class 5039 mthd 0100 data 00000000 nouveau 0000:01:00.0: fb: trapped read at 0040000000 on channel 1 [0fbbe000 DRM] engine 00 [PGRAPH] client 03 [DISPATCH] subclient 04 [M2M_IN] reason 00000006 [NULL_DMAOBJ] Fixes bug 105173 ("[MCP79][Regression] Unhandled NULL pointer dereference in nvkm_object_unmap since kernel 4.15") https://bugs.freedesktop.org/show_bug.cgi?id=105173 Fixes: 7110c89bb885 ("mmu: swap out round for ALIGN ") Tested-by: Pierre Moreau <pierre.morrow@free.fr> Reviewed-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Maris Nartiss <maris.nartiss@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # v4.15+
2018-03-15Merge tag 'gvt-fixes-2018-03-15' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi4-4/+82
drm-intel-fixes gvt-fixes-2018-03-15 - Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu) - OA context fix for vGPU profiling (Min) - privilege batch buffer reloc fix (Fred) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180315100023.5n5a74afky6qinoh@zhen-hp.sh.intel.com
2018-03-15Merge tag 'for-4.16/dm-fixes-3' of ↵Linus Torvalds1-22/+21
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable DM multipath fix to restore ability to pass integrity data - two DM multipath fixes for a fix that was merged into 4.16-rc5 * tag 'for-4.16/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm mpath: fix passing integrity data dm mpath: eliminate need to use scsi_device_from_queue dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointer
2018-03-15drm/i915/gvt: fix user copy warning by whitelist workload rb_tail fieldZhenyu Wang1-4/+6
This is to fix warning got as: [ 6730.476938] ------------[ cut here ]------------ [ 6730.476979] Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLAB object 'gvt-g_vgpu_workload' (offset 120, size 4)! [ 6730.477021] WARNING: CPU: 2 PID: 441 at mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 [ 6730.477042] Modules linked in: tun(E) bridge(E) stp(E) llc(E) kvmgt(E) x86_pkg_temp_thermal(E) vfio_mdev(E) intel_powerclamp(E) mdev(E) coretemp(E) vfio_iommu_type1(E) vfio(E) kvm_intel(E) kvm(E) hid_generic(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) usbhid(E) i915(E) crc32c_intel(E) hid(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) intel_cstate(E) idma64(E) evdev(E) virt_dma(E) iTCO_wdt(E) intel_uncore(E) intel_rapl_perf(E) intel_lpss_pci(E) sg(E) shpchp(E) mei_me(E) pcspkr(E) iTCO_vendor_support(E) intel_lpss(E) intel_pch_thermal(E) prime_numbers(E) mei(E) mfd_core(E) video(E) acpi_pad(E) button(E) binfmt_misc(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) e1000e(E) xhci_pci(E) sdhci_pci(E) [ 6730.477244] ptp(E) cqhci(E) xhci_hcd(E) pps_core(E) sdhci(E) mmc_core(E) i2c_i801(E) usbcore(E) thermal(E) fan(E) [ 6730.477276] CPU: 2 PID: 441 Comm: gvt workload 0 Tainted: G E 4.16.0-rc1-gvt-staging-0213+ #127 [ 6730.477303] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0039.2016.0316.1747 03/16/2016 [ 6730.477326] RIP: 0010:usercopy_warn+0x7e/0xa0 [ 6730.477340] RSP: 0018:ffffba6301223d18 EFLAGS: 00010286 [ 6730.477355] RAX: 0000000000000000 RBX: ffff8f41caae9838 RCX: 0000000000000006 [ 6730.477375] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff8f41dad166f0 [ 6730.477395] RBP: 0000000000000004 R08: 0000000000000576 R09: 0000000000000000 [ 6730.477415] R10: ffffffffb1293fb2 R11: 00000000ffffffff R12: 0000000000000001 [ 6730.477447] R13: ffff8f41caae983c R14: ffff8f41caae9838 R15: 00007f183ca2b000 [ 6730.477467] FS: 0000000000000000(0000) GS:ffff8f41dad00000(0000) knlGS:0000000000000000 [ 6730.477489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6730.477506] CR2: 0000559462817291 CR3: 000000028b46c006 CR4: 00000000003626e0 [ 6730.477526] Call Trace: [ 6730.477537] __check_object_size+0x9c/0x1a0 [ 6730.477562] __kvm_write_guest_page+0x45/0x90 [kvm] [ 6730.477585] kvm_write_guest+0x46/0x80 [kvm] [ 6730.477599] kvmgt_rw_gpa+0x9b/0xf0 [kvmgt] [ 6730.477642] workload_thread+0xa38/0x1040 [i915] [ 6730.477659] ? do_wait_intr_irq+0xc0/0xc0 [ 6730.477673] ? finish_wait+0x80/0x80 [ 6730.477707] ? clean_workloads+0x120/0x120 [i915] [ 6730.477722] kthread+0x111/0x130 [ 6730.477733] ? _kthread_create_worker_on_cpu+0x60/0x60 [ 6730.477750] ? exit_to_usermode_loop+0x6f/0xb0 [ 6730.477766] ret_from_fork+0x35/0x40 [ 6730.477777] Code: 48 c7 c0 20 e3 25 b1 48 0f 44 c2 41 50 51 41 51 48 89 f9 49 89 f1 4d 89 d8 4c 89 d2 48 89 c6 48 c7 c7 78 e3 25 b1 e8 b2 bc e4 ff <0f> ff 48 83 c4 18 c3 48 c7 c6 09 d0 26 b1 49 89 f1 49 89 f3 eb [ 6730.477849] ---[ end trace cae869c1c323e45a ]--- By whitelist guest page write from workload struct allocated from kmem cache. Reviewed-by: Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit 5627705406874df57fdfad3b4e0c9aedd3b007df)
2018-03-15drm/i915/gvt: Correct the privilege shadow batch buffer addressfred gao3-0/+20
Once the ring buffer is copied to ring_scan_buffer and scanned, the shadow batch buffer start address is only updated into ring_scan_buffer, not the real ring address allocated through intel_ring_begin in later copy_workload_to_ring_buffer. This patch is only to set the right shadow batch buffer address from Ring buffer, not include the shadow_wa_ctx. v2: - refine some comments. (Zhenyu) v3: - fix typo in title. (Zhenyu) v4: - remove the unnecessary comments. (Zhenyu) - add comments in bb_start_cmd_va update. (Zhenyu) Fixes: 0a53bc07f044 ("drm/i915/gvt: Separate cmd scan from request allocation") Cc: stable@vger.kernel.org # v4.15 Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yulei Zhang <yulei.zhang@intel.com> Signed-off-by: fred gao <fred.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-03-14Merge tag 'scsi-fixes' of ↵Linus Torvalds4-44/+55
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is four patches, consisting of one regression from the merge window (qla2xxx), one long-standing memory leak (sd_zbc), one event queue mislabelling which we want to eliminate to discourage the pattern (mpt3sas), and one behaviour change because re-reading the partition table shouldn't clear the ro flag" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Keep disk read-only when re-reading partition scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure scsi: sd_zbc: Fix potential memory leak scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
2018-03-14Merge branch 'percpu_ref-rcu-audit-fixes' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc Pull percpu_ref rcu fixes from Tejun Heo: "Jann Horn found that aio was depending on the internal RCU grace periods of percpu-ref and that it's broken because aio uses regular RCU while percpu_ref uses sched-RCU. Depending on percpu_ref's internal grace periods isn't a good idea because - The RCU type might not match. - percpu_ref's grace periods are used to switch to atomic mode. They aren't between the last put and the invocation of the last release. This is easy to get confused about and can lead to subtle bugs. - percpu_ref might not have grace periods at all depending on its current operation mode. This patchset audits and fixes percpu_ref users for their RCU usages" [ There's a continuation of this series that clarifies percpu_ref documentation that the internal grace periods must not be depended upon, and introduces rcu_work to simplify bouncing to a workqueue after an RCU grace period. That will go in for 4.17 - this is just the minimal set with the fixes that are tagged for -stable ] * 'percpu_ref-rcu-audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: RDMAVT: Fix synchronization around percpu_ref fs/aio: Use RCU accessors for kioctx_table->table[] fs/aio: Add explicit RCU grace period when freeing kioctx
2018-03-15Merge tag 'drm-intel-fixes-2018-03-14' of ↵Dave Airlie3-13/+23
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - 1 display fix for bxt - 1 gem fix for fences - 1 gem/pm fix for rps freq * tag 'drm-intel-fixes-2018-03-14' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Kick the rps worker when changing the boost frequency drm/i915: Only prune fences after wait-for-all drm/i915: Enable VBT based BL control for DP
2018-03-15Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie12-25/+56
into drm-fixes A few fixes for 4.16: - Fix a backlight S/R regression on amdgpu - Fix prime teardown on radeon and amdgpu - DP fix for amdgpu * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu/dce: Don't turn off DP sink when disconnected drm/amdgpu: save/restore backlight level in legacy dce code drm/radeon: fix prime teardown order drm/amdgpu: fix prime teardown order
2018-03-14drm/amdgpu/dce: Don't turn off DP sink when disconnectedMichel Dänzer1-19/+12
Turning off the sink in this case causes various issues, because userspace expects it to stay on until it turns it off explicitly. Instead, turn the sink off and back on when a display is connected again. This dance seems necessary for link training to work correctly. Bugzilla: https://bugs.freedesktop.org/105308 Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14drm/amdgpu: save/restore backlight level in legacy dce codeAlex Deucher7-2/+40
Save/restore the backlight level scratch register in S3/S4 so the backlight level comes back at the previously requested level. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047 Fixes: 4ec6ecf48c64d (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling) Acked-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14drm/radeon: fix prime teardown orderChristian König2-2/+2
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14drm/amdgpu: fix prime teardown orderChristian König2-2/+2
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14Merge tag 'platform-drivers-x86-v4.16-7' of ↵Linus Torvalds4-6/+7
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform drives fixes from Darren Hart: - DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it depends on DCDBAS, update the Kconfig accordingly. - fix the dell driver init order to ensure that the driver dependencies are met, avoiding race conditions resulting in boot failure on certain systems when the drivers are built-in. * tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Fix dell driver init order platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
2018-03-14dm mpath: fix passing integrity dataSteffen Maier1-2/+3
After v4.12 commit e2460f2a4bc7 ("dm: mark targets that pass integrity data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support block integrity any more. So add it to the whitelist. This is also a pre-requisite to use block integrity with other dm layer(s) on top of multipath, such as kpartx partitions (dm-linear) or LVM. Also, bump target version to reflect this fix. Fixes: e2460f2a4bc7 ("dm: mark targets that pass integrity data") Cc: <stable@vger.kernel.org> #4.12+ Bisected-by: Fedor Loshakov <loshakov@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-14RDMAVT: Fix synchronization around percpu_refTejun Heo1-4/+6
rvt_mregion uses percpu_ref for reference counting and RCU to protect accesses from lkey_table. When a rvt_mregion needs to be freed, it first gets unregistered from lkey_table and then rvt_check_refs() is called to wait for in-flight usages before the rvt_mregion is freed. rvt_check_refs() seems to have a couple issues. * It has a fast exit path which tests percpu_ref_is_zero(). However, a percpu_ref reading zero doesn't mean that the object can be released. In fact, the ->release() callback might not even have started executing yet. Proceeding with freeing can lead to use-after-free. * lkey_table is RCU protected but there is no RCU grace period in the free path. percpu_ref uses RCU internally but it's sched-RCU whose grace periods are different from regular RCU. Also, it generally isn't a good idea to depend on internal behaviors like this. To address the above issues, this patch removes the fast exit and adds an explicit synchronize_rcu(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: linux-rdma@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-14platform/x86: Fix dell driver init orderDarren Hart (VMware)3-3/+3
Update the initcall ordering to satisfy the following dependency ordering: 1. DCDBAS, ACPI_WMI 2. DELL_SMBIOS, DELL_RBTN 3. DELL_LAPTOP, DELL_WMI By assigning them to the following initcall levels: subsys_initcall: DCDBAS, ACPI_WMI module_init: DELL_SMBIOS, DELL_RBTN late_initcall: DELL_LAPTOP, DELL_WMI Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Mario.Limonciello@dell.com Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-14platform/x86: dell-smbios: Resolve dependency error on ACPI_WMIDarren Hart1-3/+4
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled, DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to prevent a configuration where DELL_SMBIOS=y and either backend dependency =m. Update the comment accordingly. Cc: Mario Limonciello <mario.limonciello@dell.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-14Merge tag 'usb-4.16-rc6' of ↵Linus Torvalds21-217/+204
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a small clump of USB fixes for 4.16-rc6. Nothing major, just a number of fixes in lots of different drivers, as well as a PHY driver fix that snuck into this tree. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: musb: Fix external abort in musb_remove on omap2430 phy: qcom-ufs: add MODULE_LICENSE tag usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM usbip: vudc: fix null pointer dereference on udc->lock xhci: Fix front USB ports on ASUS PRIME B350M-A usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" usb: usbmon: Read text within supplied buffer size usb: host: xhci-rcar: add support for r8a77965 USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h usb: xhci: dbc: Fix lockdep warning xhci: fix endpoint context tracer output Revert "typec: tcpm: Only request matching pdos" usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers usb: quirks: add control message delay for 1b1c:1b20 uas: fix comparison for error code usb: gadget: udc: renesas_usb3: add binging for r8a77965 usb: renesas_usbhs: add binding for r8a77965 usb: dwc2: fix STM32F7 USB OTG HS compatible dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding ...
2018-03-14Merge tag 'tty-4.16-rc6' of ↵Linus Torvalds8-5/+41
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty core and serial driver fixes for 4.16-rc6. They resolve some newly reported bugs, as well as some very old ones, which is always nice to see. There is also a new device id added in here for good measure. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: fix bogus dev_err serial: sh-sci: prevent lockup on full TTY buffers serial: 8250_pci: Add Brainboxes UC-260 4 port serial device earlycon: add reg-offset to physical address before mapping serial: core: mark port as initialized in autoconfig serial: 8250_pci: Don't fail on multiport card class tty/serial: atmel: add new version check for usart tty: make n_tty_read() always abort if hangup is in progress
2018-03-14Merge tag 'staging-4.16-rc6' of ↵Linus Torvalds2-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.16-rc6 Two of them are lockdep fixes for the ashmem driver that have been reported by a number of people recently. The last one is a fix for the comedi driver core. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: Fix possible deadlock in ashmem_ioctl staging: comedi: fix comedi_nsamples_left. staging: android: ashmem: Fix lockdep issue during llseek
2018-03-13dm mpath: eliminate need to use scsi_device_from_queueMike Snitzer1-9/+8
Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name() -- whose implementation uses scsi_device_from_queue() to avoid trying to access SCSI-specific resources from non-SCSI devices. Fixes buildbot reported issue when CONFIG_SCSI isn't set: ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined! Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-13dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointerMike Snitzer1-11/+10
Initialize all the scsi_dh related 'struct multipath' members regardless of whether a scsi_dh is in use or not. The subtle (and fragile) SCSI-assuming legacy code clearly needs further decoupling from non-SCSI (and/or developer understanding). Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Reported-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-13auxdisplay: img-ascii-lcd: Silence 2 uninitialized warningsMiguel Ojeda1-2/+2
The warnings are: drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized] At lines 109 and 207. Reported by Geert using the build service several times, e.g.: https://lkml.org/lkml/2018/2/19/303 They are two false positives, since num_chars > 0 in the three present configurations (boston, malta, sead3). Initialize to 0 in order to silence the warning. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: img-ascii-lcd: Fix doc comment to silence warningsMiguel Ojeda1-1/+1
Compiling with W=1 with gcc 7.2.0 gives 2 warnings: drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or member 't' not described in 'img_ascii_lcd_scroll' drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function parameter 'arg' description in 'img_ascii_lcd_scroll' Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13auxdisplay: panel: Change comments to silence fallthrough warningsMiguel Ojeda1-3/+3
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like: drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’: drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Cc: Willy Tarreau <w@1wt.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13usb: musb: Fix external abort in musb_remove on omap2430Merlijn Wajer1-1/+1
This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-13efi/libstub/tpm: Initialize pointer variables to zero for mixed modeArd Biesheuvel1-2/+2
As reported by Jeremy Cline, running the new TPM libstub code in mixed mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking the TCG2 protocol, or when accessing the log_tbl pool allocation. The reason turns out to be that in both cases, the 64-bit pointer variables are not fully initialized by the 32-bit EFI code, and so we should take care to zero initialize these variables beforehand, or we'll end up dereferencing bogus pointers. Reported-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hdegoede@redhat.com Cc: jarkko.sakkinen@linux.intel.com Cc: javierm@redhat.com Cc: linux-efi@vger.kernel.org Cc: tweek@google.com Link: http://lkml.kernel.org/r/20180313140922.17266-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12drm/i915: Kick the rps worker when changing the boost frequencyChris Wilson1-2/+8
The boost frequency is only applied from the RPS worker while someone is waiting on a request and requested a boost. As such, when the user wishes to change the frequency, we have to kick the worker in order to re-evaluate whether to apply the boost frequency. v2: Check num_waiters to decide if we should kick the worker to handle boosting. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180308142648.4016-1-chris@chris-wilson.co.uk (cherry picked from commit 59cd31f177b34deb834a5c97478502741be1cf2e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-12drm/i915: Only prune fences after wait-for-allChris Wilson1-4/+12
Currently, we only allow ourselves to prune the fences so long as all the waits completed (i.e. all the fences we checked were signaled), and that the reservation snapshot did not change across the wait. However, if we only waited for a subset of the reservation object, i.e. just waiting for the last writer to complete as opposed to all readers as well, then we would erroneously conclude we could prune the fences as indeed although all of our waits were successful, they did not represent the totality of the reservation object. v2: We only need to check the shared fences due to construction (i.e. all of the shared fences will be later than the exclusive fence, if any). Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307171303.29466-1-chris@chris-wilson.co.uk (cherry picked from commit fa73055b8442c97b3ba7cd0aa57cd2ad32124201) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-12drm/i915: Enable VBT based BL control for DPMustamin B Mustaffa1-7/+3
Currently, BXT_PP is hardcoded with value '0'. It practically disabled eDP backlight on MRB (BXT) platform. This patch will tell which BXT_PP registers (there are two set of PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing table) and this will enabled eDP backlight controller on MRB (BXT) platform. v2: - Remove unnecessary information in commit message. - Assign vbt.backlight.controller to a backlight_controller variable and return the variable value. v3: - Rebased to latest code base. - updated commit title. Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com (cherry picked from commit 73c0fcac97bf7f4a6a61b825b205d1cf127cfca7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-12Merge tag 'phy-for-4.16-rc' of ↵Greg Kroah-Hartman1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus phy: for 4.16-rc *) Fix a Kbuild failure in qcom-ufs Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-12phy: qcom-ufs: add MODULE_LICENSE tagArnd Bergmann1-0/+5
While the specific UFS PHY drivers (14nm and 20nm) have a module license, the common base module does not, leading to a Kbuild failure: WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable' This adds a module description and license tag to fix the build. I added both Yaniv and Vivek as authors here, as Yaniv sent the initial submission, while Vivek did most of the work since. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-11Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Just a single fix which adds a missing Kconfig dependency to avoid unmet dependency warnings" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
2018-03-11Merge tag 'dmaengine-fix-4.16-rc5' of ↵Linus Torvalds2-6/+21
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Two small fixes are for this cycle: - fix max_chunk_size for rcar-dmac for R-Car Gen3 - fix clock resource of mv_xor_v2" * tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mv_xor_v2: Fix clock resource by adding a register clock dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
2018-03-11Merge tag 'gpio-v4.16-3' of ↵Linus Torvalds1-22/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "This is a single GPIO fix for the v4.16 series affecting the Renesas driver, and fixes wakeup from external stuff" * tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: rcar: Use wakeup_path i.s.o. explicit clock handling
2018-03-11dmaengine: mv_xor_v2: Fix clock resource by adding a register clockGregory CLEMENT1-5/+20
On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-11irqchip/irq-imx-gpcv2: Remove unused functionFabio Estevam1-14/+0
imx_gpcv2_get_wakeup_source() is not used anywhere, so remove it. This fixes the following sparse warning: drivers/irqchip/irq-imx-gpcv2.c:34:5: warning: symbol 'imx_gpcv2_get_wakeup_source' was not declared. Should it be static? Fixes: e324c4dc4a59 ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-11irqchip/gic-v3-its: Ensure nr_ites >= nr_lpisArd Biesheuvel1-5/+4
When struct its_device instances are created, the nr_ites member will be set to a power of 2 that equals or exceeds the requested number of MSIs passed to the msi_prepare() callback. At the same time, the LPI map is allocated to be some multiple of 32 in size, where the allocated size may be less than the requested size depending on whether a contiguous range of sufficient size is available in the global LPI bitmap. This may result in the situation where the nr_ites < nr_lpis, and since nr_ites is what we program into the hardware when we map the device, the additional LPIs will be non-functional. For bog standard hardware, this does not really matter. However, in cases where ITS device IDs are shared between different PCIe devices, we may end up allocating these additional LPIs without taking into account that they don't actually work. So let's make nr_ites at least 32. This ensures that all allocated LPIs are 'live', and that its_alloc_device_irq() will fail when attempts are made to allocate MSIs beyond what was allocated in the first place. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [maz: updated comment] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 07:34:00 +0000