summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-18Merge remote-tracking branches 'asoc/topic/hisilicon', 'asoc/topic/iio', ↵Mark Brown11-5/+2206
'asoc/topic/max98373' and 'asoc/topic/max98926' into asoc-next
2018-01-18Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown2-8/+44
2018-01-15IIO: ADC: stm32-dfsdm: fix static check warningArnaud Pouliquen1-4/+0
iio_priv does not return an error pointer, so check is not valid. Patch suppresses it. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-15IIO: ADC: stm32-dfsdm: code optimizationArnaud Pouliquen2-15/+2
Use of_device_get_match_data to optimize the source code. No check is needed on dev_data as match table is defined in driver. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-14Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull NVMe fix from Jens Axboe: "Just a single fix for nvme over fabrics that should go into 4.15" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-fabrics: initialize default host->id in nvmf_host_default()
2018-01-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds2-0/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
2018-01-13Merge tag 'usb-4.15-rc8' of ↵Linus Torvalds8-32/+62
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes and device ids for 4.15-rc8 Nothing major, small fixes for various devices, some resolutions for bugs found by fuzzers, and the usual handful of new device ids. All of these have been in linux-next with no reported issues" * tag 'usb-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Documentation: usb: fix typo in UVC gadgetfs config command usb: misc: usb3503: make sure reset is low for at least 100us uas: ignore UAS for Norelsys NS1068(X) chips USB: UDC core: fix double-free in usb_add_gadget_udc_release USB: fix usbmon BUG trigger usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer usbip: remove kernel addresses from usb device and urb debug msgs usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input USB: serial: cp210x: add new device ID ELV ALC 8xxx USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2018-01-13Merge tag 'staging-4.15-rc8' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single android ashmem bugfix that resolves a reported issue in that interface. It's been in linux-next this week with no reported issues" * tag 'staging-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl
2018-01-13Merge tag 'char-misc-4.15-rc8' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two bugfixes for some driver bugs for 4.15-rc8 The first is a bluetooth security bug that has been ignored by the Bluetooth developers for months for no obvious reason at all, so I've taken it through my tree. The second is a simple double-free bug in the mux subsystem. Both have been in linux-next for a while with no reported issues" * tag 'char-misc-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mux: core: fix double get_device() Bluetooth: Prevent stack info leak from the EFS element.
2018-01-12Merge tag 'for-linus-4.15-rc8-tag' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two build fixes for clang and two fixes for rather unlikely situations in the Xen gntdev driver" * tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: Fix partial gntdev_mmap() cleanup xen/gntdev: Fix off-by-one error when unmapping with holes x86: xen: remove the use of VLAIS x86/xen/time: fix section mismatch for xen_init_time_ops()
2018-01-12Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-linusJens Axboe1-0/+1
Pull a single NVMe fix from Christoph for 4.15.
2018-01-12Merge tag 'mmc-v4.15-rc2-2' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - s3mci: mark debug_regs[] as static - renesas_sdhi: Add MODULE_LICENSE * tag 'mmc-v4.15-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: s3mci: mark debug_regs[] as static mmc: renesas_sdhi: Add MODULE_LICENSE
2018-01-12Merge tag 'drm-fixes-for-v4.15-rc8' of ↵Linus Torvalds14-43/+39
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - Nouveau: regression fix - Tegra: regression fix - vmwgfx: crasher + freed data leak - i915: KASAN use after free fix, whitelist register to avoid hang fix, GVT fixes - vc4: irq/pm fix * tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux: drm/i915: Don't adjust priority on an already signaled fence drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake. drm/vmwgfx: Potential off by one in vmw_view_add() drm/tegra: sor: Fix hang on Tegra124 eDP drm/vmwgfx: Don't cache framebuffer maps drm/nouveau/disp/gf119: add missing drive vfunc ptr drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser drm/i915/gvt: Clear the shadow page table entry after post-sync drm/vc4: Move IRQ enable to PM path
2018-01-12Merge tag 'drm-intel-fixes-2018-01-11-1' of ↵Dave Airlie6-4/+17
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Hopefully final drm/i915 fixes for v4.15: - Fix a KASAN reported use after free - Whitelist a register to avoid hangs - GVT fixes * tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Don't adjust priority on an already signaled fence drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake. drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser drm/i915/gvt: Clear the shadow page table entry after post-sync
2018-01-12Merge branch 'vmwgfx-fixes-4.15' of ↵Dave Airlie4-36/+15
git://people.freedesktop.org/~thomash/linux into drm-fixes Two important fixes for vmwgfx. The off-by-one fix could cause a malicious user to potentially crash the kernel. The framebuffer map cache fix can under some circumstances enable a user to read from or write to freed pages. * 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Potential off by one in vmw_view_add() drm/vmwgfx: Don't cache framebuffer maps
2018-01-11Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds1-6/+12
Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id
2018-01-11Merge tag 'gpio-v4.15-4' of ↵Linus Torvalds1-12/+23
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly" * tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
2018-01-11usb: misc: usb3503: make sure reset is low for at least 100usStefan Agner1-0/+2
When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-11Merge tag 'usb-serial-4.15-rc8' of ↵Greg Kroah-Hartman1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.15-rc8 Here are a couple of new device ids for cp210x. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2018-01-11IIO: ADC: fix return value check in stm32_dfsdm_adc_probe()Wei Yongjun1-2/+2
In case of error, the function devm_iio_device_alloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-11IIO: ADC: stm32-dfsdm: avoid unused-variable warningArnd Bergmann1-2/+1
Building with CONFIG_OF disabled produces a compiler warning: drivers/iio/adc/stm32-dfsdm-core.c: In function 'stm32_dfsdm_probe': drivers/iio/adc/stm32-dfsdm-core.c:245:22: error: unused variable 'pnode' [-Werror=unused-variable] This removes the variable and open-codes it in the only place it gets used to avoid that warning. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-11drm/i915: Don't adjust priority on an already signaled fenceChris Wilson2-1/+4
When we retire a signaled fence, we free the dependency tree. However, we skip clearing the list so that if we then try to adjust the priority of the signaled fence, we may walk the list of freed dependencies. [ 3083.156757] ================================================================== [ 3083.156806] BUG: KASAN: use-after-free in execlists_schedule+0x199/0x660 [i915] [ 3083.156810] Read of size 8 at addr ffff8806bf20f400 by task Xorg/831 [ 3083.156815] CPU: 0 PID: 831 Comm: Xorg Not tainted 4.15.0-rc6-no-psn+ #1 [ 3083.156817] Hardware name: Notebook N24_25BU/N24_25BU, BIOS 5.12 02/17/2017 [ 3083.156818] Call Trace: [ 3083.156823] dump_stack+0x5c/0x7a [ 3083.156827] print_address_description+0x6b/0x290 [ 3083.156830] kasan_report+0x28f/0x380 [ 3083.156872] ? execlists_schedule+0x199/0x660 [i915] [ 3083.156914] execlists_schedule+0x199/0x660 [i915] [ 3083.156956] ? intel_crtc_atomic_check+0x146/0x4e0 [i915] [ 3083.156997] ? execlists_submit_request+0xe0/0xe0 [i915] [ 3083.157038] ? i915_vma_misplaced.part.4+0x25/0xb0 [i915] [ 3083.157079] ? __i915_vma_do_pin+0x7c8/0xc80 [i915] [ 3083.157121] ? intel_atomic_state_alloc+0x44/0x60 [i915] [ 3083.157130] ? drm_atomic_helper_page_flip+0x3e/0xb0 [drm_kms_helper] [ 3083.157145] ? drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157159] ? drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157172] ? drm_ioctl+0x45b/0x560 [drm] [ 3083.157211] i915_gem_object_wait_priority+0x14c/0x2c0 [i915] [ 3083.157251] ? i915_gem_get_aperture_ioctl+0x150/0x150 [i915] [ 3083.157290] ? i915_vma_pin_fence+0x1d8/0x320 [i915] [ 3083.157331] ? intel_pin_and_fence_fb_obj+0x175/0x250 [i915] [ 3083.157372] ? intel_rotation_info_size+0x60/0x60 [i915] [ 3083.157413] ? intel_link_compute_m_n+0x80/0x80 [i915] [ 3083.157428] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157443] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157485] intel_prepare_plane_fb+0x2f8/0x5a0 [i915] [ 3083.157527] ? intel_crtc_get_vblank_counter+0x80/0x80 [i915] [ 3083.157536] drm_atomic_helper_prepare_planes+0xa0/0x1c0 [drm_kms_helper] [ 3083.157587] intel_atomic_commit+0x12e/0x4e0 [i915] [ 3083.157605] drm_atomic_helper_page_flip+0xa2/0xb0 [drm_kms_helper] [ 3083.157621] drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157638] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157652] ? drm_lease_owner+0x1a/0x30 [drm] [ 3083.157668] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157681] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157696] drm_ioctl+0x45b/0x560 [drm] [ 3083.157711] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157725] ? drm_getstats+0x20/0x20 [drm] [ 3083.157729] ? timerqueue_del+0x49/0x80 [ 3083.157732] ? __remove_hrtimer+0x62/0xb0 [ 3083.157735] ? hrtimer_try_to_cancel+0x173/0x210 [ 3083.157738] do_vfs_ioctl+0x13b/0x880 [ 3083.157741] ? ioctl_preallocate+0x140/0x140 [ 3083.157744] ? _raw_spin_unlock_irq+0xe/0x30 [ 3083.157746] ? do_setitimer+0x234/0x370 [ 3083.157750] ? SyS_setitimer+0x19e/0x1b0 [ 3083.157752] ? SyS_alarm+0x140/0x140 [ 3083.157755] ? __rcu_read_unlock+0x66/0x80 [ 3083.157757] ? __fget+0xc4/0x100 [ 3083.157760] SyS_ioctl+0x74/0x80 [ 3083.157763] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157765] RIP: 0033:0x7f6135d0c6a7 [ 3083.157767] RSP: 002b:00007fff01451888 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 3083.157769] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f6135d0c6a7 [ 3083.157771] RDX: 00007fff01451950 RSI: 00000000c01864b0 RDI: 000000000000000c [ 3083.157772] RBP: 00007f613076f600 R08: 0000000000000001 R09: 0000000000000000 [ 3083.157773] R10: 0000000000000060 R11: 0000000000003246 R12: 0000000000000000 [ 3083.157774] R13: 0000000000000060 R14: 000000000000001b R15: 0000000000000060 [ 3083.157779] Allocated by task 831: [ 3083.157783] kmem_cache_alloc+0xc0/0x200 [ 3083.157822] i915_gem_request_await_dma_fence+0x2c4/0x5d0 [i915] [ 3083.157861] i915_gem_request_await_object+0x321/0x370 [i915] [ 3083.157900] i915_gem_do_execbuffer+0x1165/0x19c0 [i915] [ 3083.157937] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.157950] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157962] drm_ioctl+0x45b/0x560 [drm] [ 3083.157964] do_vfs_ioctl+0x13b/0x880 [ 3083.157966] SyS_ioctl+0x74/0x80 [ 3083.157968] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157971] Freed by task 831: [ 3083.157973] kmem_cache_free+0x77/0x220 [ 3083.158012] i915_gem_request_retire+0x72c/0xa70 [i915] [ 3083.158051] i915_gem_request_alloc+0x1e9/0x8b0 [i915] [ 3083.158089] i915_gem_do_execbuffer+0xa96/0x19c0 [i915] [ 3083.158127] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.158140] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.158153] drm_ioctl+0x45b/0x560 [drm] [ 3083.158155] do_vfs_ioctl+0x13b/0x880 [ 3083.158156] SyS_ioctl+0x74/0x80 [ 3083.158158] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.158162] The buggy address belongs to the object at ffff8806bf20f400 which belongs to the cache i915_dependency of size 64 [ 3083.158166] The buggy address is located 0 bytes inside of 64-byte region [ffff8806bf20f400, ffff8806bf20f440) [ 3083.158168] The buggy address belongs to the page: [ 3083.158171] page:00000000d43decc4 count:1 mapcount:0 mapping: (null) index:0x0 [ 3083.158174] flags: 0x17ffe0000000100(slab) [ 3083.158179] raw: 017ffe0000000100 0000000000000000 0000000000000000 0000000180200020 [ 3083.158182] raw: ffffea001afc16c0 0000000500000005 ffff880731b881c0 0000000000000000 [ 3083.158184] page dumped because: kasan: bad access detected [ 3083.158187] Memory state around the buggy address: [ 3083.158190] ffff8806bf20f300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158192] ffff8806bf20f380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158195] >ffff8806bf20f400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158196] ^ [ 3083.158199] ffff8806bf20f480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158201] ffff8806bf20f500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158203] ================================================================== Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reported-by: Mike Keehan <mike@keehan.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104436 Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180106105618.13532-1-chris@chris-wilson.co.uk (cherry picked from commit c218ee03b9315073ce43992792554dafa0626eb8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-11drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.Kenneth Graunke2-0/+7
Geminilake requires the 3D driver to select whether barriers are intended for compute shaders, or tessellation control shaders, by whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when switching pipelines. Failure to do this properly can result in GPU hangs. Unfortunately, this means it needs to switch mid-batch, so only userspace can properly set it. To facilitate this, the kernel needs to whitelist the register. The workarounds page currently tags this as applying to Broxton only, but that doesn't make sense. The documentation for the register it references says the bit userspace is supposed to toggle only exists on Geminilake. Empirically, the Mesa patch to toggle this bit appears to fix intermittent GPU hangs in tessellation control shader barrier tests on Geminilake; we haven't seen those hangs on Broxton. v2: Mention WA #0862 in the comment (it doesn't have a name). Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org (cherry picked from commit ab062639edb0412daf6de540725276b9a5d217f9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds11-36/+51
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
2018-01-10mlxsw: spectrum_qdisc: Don't use variable array in ↵Jiri Pirko1-3/+4
mlxsw_sp_tclass_congestion_enable Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: pci: Wait after reset before accessing HWYuval Mintz2-1/+7
After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10nfp: always unmask aux interrupts at initJakub Kicinski1-0/+2
The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge tag 'wireless-drivers-for-davem-2018-01-09' of ↵David S. Miller5-28/+30
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.15 Hopefully the last set of fixes for 4.15. iwlwifi * fix DMA mapping regression since v4.14 wcn36xx * fix dynamic power save which has been broken since the driver was commited ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10of_mdio: avoid MDIO bus removal when a PHY is missingMadalin Bucur1-2/+7
If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: gianfar_ptp: move set_fipers() to spinlock protecting areaYangbo Lu1-2/+1
set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10IIO: ADC: stm32_dfsdm_stop_filter() can be statickbuild test robot1-4/+4
Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10drm/vmwgfx: Potential off by one in vmw_view_add()Dan Carpenter1-0/+2
The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error. It's one element beyond the end of the vmw_view_cotables[] table. My read on this is that it's possible to hit this failure. header->id comes from vmw_cmd_check() and it's a user controlled number between 1040 and 1225 so we can hit that error. But I don't have the hardware to test this code. Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org>
2018-01-10xen/gntdev: Fix partial gntdev_mmap() cleanupRoss Lagerwall1-1/+3
When cleaning up after a partially successful gntdev_mmap(), unmap the successfully mapped grant pages otherwise Xen will kill the domain if in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will kill the process and emit "BUG: Bad page map in process" if Xen is in release mode. This is only needed when use_ptemod is true because gntdev_put_map() will unmap grant pages itself when use_ptemod is false. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-10xen/gntdev: Fix off-by-one error when unmapping with holesRoss Lagerwall1-3/+1
If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-10gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()Geert Uytterhoeven1-12/+23
Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on r8a7740/armadillo fails with: rtc-s35390a 0-0030: error resetting chip rtc-s35390a: probe of 0-0030 failed with error -5 More debug code reveals: i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 i2c i2c-0: NAK from device addr 0x30 msg #0 s35390a_get_reg: ret = -6 Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") moved open drain/source handling from gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take into account that gpiod_set_value_cansleep() also needs this handling. The i2c protocol mandates that i2c signals are open drain, hence i2c communication fails. Fix this by adding the missing handling to gpiod_set_value_cansleep(), using a new common helper gpiod_set_value_nocheck(). Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [removed underscore syntax, added kerneldoc] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10drm/tegra: sor: Fix hang on Tegra124 eDPThierry Reding1-0/+3
The SOR0 found on Tegra124 and Tegra210 only supports eDP and LVDS and therefore has a slightly different clock tree than the SOR1 which does not support eDP, but HDMI and DP instead. Commit e1335e2f0cfc ("drm/tegra: sor: Reimplement pad clock") breaks setups with eDP because the sor->clk_out clock is uninitialized and therefore setting the parent clock (either the safe clock or either of the display PLLs) fails, which can cause hangs later on since there is no clock driving the module. Fix this by falling back to the module clock for sor->clk_out on those setups. This guarantees that the module will always be clocked by an enabled clock and hence prevents those hangs. Fixes: e1335e2f0cfc ("drm/tegra: sor: Reimplement pad clock") Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-01-10IIO: consumer: allow to set buffer sizesArnaud Pouliquen1-0/+11
Add iio consumer API to set buffer size and watermark according to sysfs API. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add stm32 DFSDM support for PDM microphoneArnaud Pouliquen1-7/+495
This code offers a way to handle PDM audio microphones in ASOC framework. Audio driver should use consumer API. A specific management is implemented for DMA, with a callback, to allows to handle audio buffers efficiently. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add STM32 DFSDM sigma delta ADC supportArnaud Pouliquen3-0/+742
Add DFSDM driver to handle sigma delta ADC. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add stm32 DFSDM core supportArnaud Pouliquen4-0/+632
Add driver for stm32 DFSDM pheripheral. Its converts a sigma delta stream in n bit samples through a low pass filter and an integrator. stm32-dfsdm-core driver is the core part supporting the filter instances dedicated to sigma-delta ADC or audio PDM microphone purpose. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add sigma delta modulator supportArnaud Pouliquen3-0/+81
Add generic driver to support sigma delta modulators. Typically, this device is hardware connected to an IIO device in charge of the conversion. Devices are bonded through the hardware consumer API. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: inkern: API for manipulating channel attributesArnaud Pouliquen1-5/+12
Extend the inkern API with functions for reading and writing attribute of iio channels. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: hw_consumer: add devm_iio_hw_consumer_allocArnaud Pouliquen1-0/+66
Add devm_iio_hw_consumer_alloc function that calls iio_hw_consumer_free when the device is unbound from the bus. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10iio: Add hardware consumer buffer supportLars-Peter Clausen3-0/+192
Hardware consumer interface can be used when one IIO device has a direct connection to another device in hardware. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10gpio: merrifield: Add support of ACPI enabled platformsAndy Shevchenko1-1/+10
The driver needs the pin control device name for ACPI. We are looking through ACPI namespace and return first found device based on ACPI HID for Intel Merrifield FLIS (pin control device). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-10ACPI: utils: Introduce acpi_dev_get_first_match_name()Andy Shevchenko1-7/+34
Sometimes the user wants to have device name of the match rather than just checking if device present or not. To make life easier for such users introduce acpi_dev_get_first_match_name() helper based on code for acpi_dev_present(). For example, GPIO driver for Intel Merrifield needs to know the device name of pin control to be able to apply GPIO mapping table to the proper device. To be more consistent with the purpose rename struct acpi_dev_present_info -> struct acpi_dev_match_info acpi_dev_present_cb() -> acpi_dev_match_cb() in the utils.c file. Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds6-27/+60
Pull block fixes from Jens Axboe: "A set of fixes that should go into this release. This contains: - An NVMe pull request from Christoph, with a few critical fixes for NVMe. - A block drain queue fix from Ming. - The concurrent lo_open/release fix for loop" * 'for-linus' of git://git.kernel.dk/linux-block: loop: fix concurrent lo_open/lo_release block: drain queue before waiting for q_usage_counter becoming zero nvme-fcloop: avoid possible uninitialized variable warning nvme-mpath: fix last path removal during traffic nvme-rdma: fix concurrent reset and reconnect nvme: fix sector units when going between formats nvme-pci: move use_sgl initialization to nvme_init_iod()
2018-01-09rbd: set max_segments to USHRT_MAXIlya Dryomov1-1/+1
Commit d3834fefcfe5 ("rbd: bump queue_max_segments") bumped max_segments (unsigned short) to max_hw_sectors (unsigned int). max_hw_sectors is set to the number of 512-byte sectors in an object and overflows unsigned short for 32M (largest possible) objects, making the block layer resort to handing us single segment (i.e. single page or even smaller) bios in that case. Cc: stable@vger.kernel.org Fixes: d3834fefcfe5 ("rbd: bump queue_max_segments") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2018-01-09rbd: reacquire lock should update lock owner client idFlorian Margaine1-5/+11
Otherwise, future operations on this RBD using exclusive-lock are going to require the lock from a non-existent client id. Cc: stable@vger.kernel.org Fixes: 14bb211d324d ("rbd: support updating the lock cookie without releasing the lock") Link: http://tracker.ceph.com/issues/19929 Signed-off-by: Florian Margaine <florian@platform.sh> [idryomov@gmail.com: rbd_set_owner_cid() call, __rbd_lock() helper] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-09uas: ignore UAS for Norelsys NS1068(X) chipsIcenowy Zheng1-0/+7
The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Cc: stable@vger.kernel.org Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 02:09:26 +0000