| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Building those list is a standard procedure described in section
'8.2.4 Decoding process for reference picture lists construction' of
the H264 specification.
We already have 2 drivers needing the same logic (hantro and rkvdec) and
I suspect we will soon have more.
Let's provide generic helpers to create those lists.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Instead of depending on the Rockchip PHY driver the ISP driver
should really depend on CONFIG_GENERIC_PHY_MIPI_DPHY,
given all it needs is the phy_mipi_dphy_get_default_config() symbol.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver is perfectly capable of being built without CONFIG_OF.
Remove this dependency, which is useful for compile-only tests.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If CONFIG_OF is not selected, the compiler will complain:
drivers/staging/media/rkisp1/rkisp1-dev.c: In function ‘rkisp1_probe’:
drivers/staging/media/rkisp1/rkisp1-dev.c:457:22: warning: unused variable ‘node’ [-Wunused-variable]
457 | struct device_node *node = pdev->dev.of_node;
Rework the code slightly and make the compiler happy.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
v4l2_fh struct define differently by CONFIG_V4L2_MEM2MEM_DEV.
If some vendors use CONFIG_V4L2_MEM2MEM_DEV by module,
it can make the mismatch of v4l2_fh sturct.
By the mismatch, the following error occurs.
===============================
[ 7.533506] v4l2_mem2mem: disagrees about version of symbol video_devdata
[ 7.533594] v4l2_mem2mem: Unknown symbol video_devdata (err -22)
[ 7.535319] v4l2_mem2mem: disagrees about version of symbol v4l2_event_pending
[ 7.542532] v4l2_mem2mem: Unknown symbol v4l2_event_pending (err -22)
===============================
So v4l2_fh struct is modified to does not have dependency
for CONFIG_V4L2_MEM2MEM_DEV.
Signed-off-by: Seungchul Kim <sc377.kim@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The fields 'fmt_type' in the structs
'rkisp1_rsz_config', 'rkisp1_isp_mbus_info' are of type
'v4l2_pixel_encoding' so it is nicer to change their name to
'pixel_enc'. Also change the define 'RKISP1_DEF_FMT_TYPE' to
'RKISP1_DEF_PIXEL_ENC'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
rkisp1_capture_fmt_cfg
The pixel encoding can be retrieved from the cap->pix.info.
Therefore the field fmt_type can be removed from the
struct rkisp1_capture_fmt_cfg.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The enum rkisp1_fmt_pix_type that holds the pixel format
which is one of RGB, YUV, BAYER, can be replace by the
v4l2 enum v4l2_pixel_encoding.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.
When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:
"DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"
We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 7b49235e83b2 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
remove the TODO item:
* Make sure uapi structs have the same size and layout in 32 and 62 bits,
and that there are no holes in the structures (pahole is a utility that
can be used to test this).
It was tested with pahole and found compatible.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If these functions fail then we return success, but we should instead
preserve negative error code and return that.
Fixes: fde649b418d1 ("media: vicodec: Register another node for stateless decoder")
Fixes: c022a4a95722 ("media: vicodec: add struct for encoder/decoder instance")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add H264 profile "Contrained High" and H264 levels "5.2",
"6.0", "6.1" and "6.2".
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently v4l2-compliance tool returns the following output:
Compliance test for imx-media-csc-s device /dev/video8:
Driver Info:
Driver name : imx-media-csc-s
Card type : imx-media-csc-scaler
Bus info : platform:imx-media-csc-scaler
The driver name string is limited to 16 characters, so provide
a shorter name in order to get a better output.
While at it, use the same shorter name for driver, card and platform.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The variable status is being assigned a value that is never read.
The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
aliases property name must include only lowercase and '-'. Fix in dts
and driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The pointer 'common' is being assigned with a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx_media_mbus_fmt_to_pix_fmt() and imx_media_mbus_fmt_to_ipu_image()
functions do not need to modify their mbus argument, and
imx_media_ipu_image_to_mbus_fmt() does not need to modify its ipu_image
argument. Make them const.
[slongerbeam@gmail.com: Constified mbus arg to
imx_media_mbus_fmt_to_ipu_image(), and ipu_image
arg to imx_media_ipu_image_to_mbus_fmt(), as well]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Rename the format lookup and enumeration functions according to their
usage:
- Rename imx_media_(find|enum)_format() to *_pixel_format() to
explicitly state on what formats the functions operate. This aligns
the naming scheme with the media bus and IPU format functions that
already end with *_mbus_format() and *_ipu_formats().
- Rename all enumeration functions to pluralize 'formats' at the end, as
they enumerate multiple formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
To make the code easier to follow, split up find_format() into separate
search functions for pixel formats and media-bus codes, and inline
find_format() into the exported functions imx_media_find_format()
and imx_media_find_mbus_format().
Do the equivalent for enum_format().
Also add comment blocks for the exported find|enum functions.
The convenience functions imx_media_find_ipu_format() and
imx_media_enum_ipu_format() can now be made inline and moved to
imx-media.h.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx_media_pixfmt structures include a codes member that stores
media bus codes as a fixed array of 4 integers. The functions dealing
with the imx_media_pixfmt structures assume that the array of codes is
terminated by a 0 element. This mechanism is fragile, as demonstrated
by several instances of the structure containing 4 non-zero codes.
Fix this by turning the array into a pointer, and providing an
IMX_BUS_FMTS macro to initialize the codes member with a guaranteed 0
element at the end.
[Fixed a NULL deref of the codes pointer in a couple places]
[Added more comments for the struct imx_media_pixfmt members,
including a bold NOTE! for future developers that codes pointer
is NULL for the in-memory-only formats]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a PIXFMT_SEL_IPU selection flag, to select only the IPU-internal
pixel formats, and move the single-entry IPU-internal pixel format
arrays into pixel_formats[]. imx_media_find_ipu_format() and
imx_media_enum_ipu_format() can now simply call find_format() and
enum_format().
The RGB32 format is both an IPU-internal format, and an in-memory format
via idmac channels that is supported by the IPUv3 driver, so it appears
twice in pixel_formats[], one with ipufmt=false for the in-memory format,
and again with ipufmt=true for the IPU-internal format.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
After the introduction of the CS_SEL_BAYER flag, the "codespace"
pixel format selection enumeration wording no longer makes sense
(and even before, when selecting between YUV or RGB formats,
"codespace" was a misuse of the term).
Rename
- 'enum codespace_sel' to 'enum imx_pixfmt_sel'
- CS_SEL_* to PIXFMT_SEL_*
- local vars named cs_sel to fmt_sel or just sel
No functional changes.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
- imx_media_capture_device_register() needs to use CS_SEL_ANY when
finding the format from the attached source subdevice, because the
source can be a CSI which supports bayer, and the CSI may have selected
a bayer format when it registered.
- Likewise, imx_media_init_mbus_fmt() is called from the CSI, so the
function may be passed a bayer code. Use CS_SEL_ANY when locating
the format.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The format lookup (and enumeration) functions take a boolean flag to
tell if Bayer formats should be considered. This leads to hard to read
lines such as
return enum_format(fourcc, NULL, index, cs_sel, true, false);
where the boolean parameters can easily be mixed. To make the code
clearer, add a CS_SEL_BAYER flag that can be passed through the
codespace_sel parameter of the lookup functions to replace the bool
parameter.
[slongerbeam@gmail.com: Instead of declaring CS_SEL_ANY as a bitfield
containing only CS_SEL_YUV | CS_SEL_RGB, declare CS_SEL_ANY as all of
the above (YUV, RGB, BAYER). A new enum is declared for the YUV | RGB
selection as CS_SEL_YUV_RGB, and that is used by sub-devices that
don't support BAYER and only allow selecting and enumerating YUV or RGB
encodings. CS_SEL_ANY is now only used by the CSI sub-devices and the
attached capture interfaces, since only those devices support BAYER
formats.]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The init_mbus_colorimetry() function is small and used in a single
place. The code becomes easier to follow if it gets inline in its
caller. Do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Iterate over all media bus formats, not just over the first format in
each imx_media_pixfmt entry.
Before:
$ v4l2-ctl -d $(media-ctl -e ipu1_csi0) --list-subdev-mbus-codes 0
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0)
0x2006: MEDIA_BUS_FMT_UYVY8_2X8
0x2008: MEDIA_BUS_FMT_YUYV8_2X8
0x1008: MEDIA_BUS_FMT_RGB565_2X8_LE
0x100a: MEDIA_BUS_FMT_RGB888_1X24
0x100d: MEDIA_BUS_FMT_ARGB8888_1X32
0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
0x3013: MEDIA_BUS_FMT_SGBRG8_1X8
0x3002: MEDIA_BUS_FMT_SGRBG8_1X8
0x3014: MEDIA_BUS_FMT_SRGGB8_1X8
0x3007: MEDIA_BUS_FMT_SBGGR10_1X10
0x300e: MEDIA_BUS_FMT_SGBRG10_1X10
0x300a: MEDIA_BUS_FMT_SGRBG10_1X10
0x300f: MEDIA_BUS_FMT_SRGGB10_1X10
0x2001: MEDIA_BUS_FMT_Y8_1X8
0x200a: MEDIA_BUS_FMT_Y10_1X10
After:
$ v4l2-ctl -d $(media-ctl -e ipu1_csi0) --list-subdev-mbus-codes 0
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0)
0x2006: MEDIA_BUS_FMT_UYVY8_2X8
0x200f: MEDIA_BUS_FMT_UYVY8_1X16
0x2008: MEDIA_BUS_FMT_YUYV8_2X8
0x2011: MEDIA_BUS_FMT_YUYV8_1X16
0x1008: MEDIA_BUS_FMT_RGB565_2X8_LE
0x100a: MEDIA_BUS_FMT_RGB888_1X24
0x100c: MEDIA_BUS_FMT_RGB888_2X12_LE
0x100d: MEDIA_BUS_FMT_ARGB8888_1X32
0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
0x3013: MEDIA_BUS_FMT_SGBRG8_1X8
0x3002: MEDIA_BUS_FMT_SGRBG8_1X8
0x3014: MEDIA_BUS_FMT_SRGGB8_1X8
0x3007: MEDIA_BUS_FMT_SBGGR10_1X10
0x3008: MEDIA_BUS_FMT_SBGGR12_1X12
0x3019: MEDIA_BUS_FMT_SBGGR14_1X14
0x301d: MEDIA_BUS_FMT_SBGGR16_1X16
0x300e: MEDIA_BUS_FMT_SGBRG10_1X10
0x3010: MEDIA_BUS_FMT_SGBRG12_1X12
0x301a: MEDIA_BUS_FMT_SGBRG14_1X14
0x301e: MEDIA_BUS_FMT_SGBRG16_1X16
0x300a: MEDIA_BUS_FMT_SGRBG10_1X10
0x3011: MEDIA_BUS_FMT_SGRBG12_1X12
0x301b: MEDIA_BUS_FMT_SGRBG14_1X14
0x301f: MEDIA_BUS_FMT_SGRBG16_1X16
0x300f: MEDIA_BUS_FMT_SRGGB10_1X10
0x3012: MEDIA_BUS_FMT_SRGGB12_1X12
0x301c: MEDIA_BUS_FMT_SRGGB14_1X14
0x3020: MEDIA_BUS_FMT_SRGGB16_1X16
0x2001: MEDIA_BUS_FMT_Y8_1X8
0x200a: MEDIA_BUS_FMT_Y10_1X10
0x2013: MEDIA_BUS_FMT_Y12_1X12
[laurent.pinchart@ideasonboard.com: Decrement index to replace loop counter k]
[laurent.pinchart@ideasonboard.com: Return directly from within the loops]
Fixes: e130291212df5 ("[media] media: Add i.MX media core driver")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Merge yuv_formats and rgb_formats into a single array. Always loop over
all entries, skipping those that do not match the requested search
criteria. This simplifies the code, lets us get rid of the manual
counting of array entries, and stops accidentally ignoring some non-mbus
RGB formats.
Before:
$ v4l2-ctl -d /dev/video14 --list-formats-out
ioctl: VIDIOC_ENUM_FMT
Type: Video Output
[0]: 'UYVY' (UYVY 4:2:2)
[1]: 'YUYV' (YUYV 4:2:2)
[2]: 'YU12' (Planar YUV 4:2:0)
[3]: 'YV12' (Planar YVU 4:2:0)
[4]: '422P' (Planar YUV 4:2:2)
[5]: 'NV12' (Y/CbCr 4:2:0)
[6]: 'NV16' (Y/CbCr 4:2:2)
[7]: 'RGBP' (16-bit RGB 5-6-5)
[8]: 'RGB3' (24-bit RGB 8-8-8)
[9]: 'BX24' (32-bit XRGB 8-8-8-8)
After:
$ v4l2-ctl -d /dev/video14 --list-formats-out
ioctl: VIDIOC_ENUM_FMT
Type: Video Output
[0]: 'UYVY' (UYVY 4:2:2)
[1]: 'YUYV' (YUYV 4:2:2)
[2]: 'YU12' (Planar YUV 4:2:0)
[3]: 'YV12' (Planar YVU 4:2:0)
[4]: '422P' (Planar YUV 4:2:2)
[5]: 'NV12' (Y/CbCr 4:2:0)
[6]: 'NV16' (Y/CbCr 4:2:2)
[7]: 'RGBP' (16-bit RGB 5-6-5)
[8]: 'RGB3' (24-bit RGB 8-8-8)
[9]: 'BGR3' (24-bit BGR 8-8-8)
[10]: 'BX24' (32-bit XRGB 8-8-8-8)
[11]: 'XR24' (32-bit BGRX 8-8-8-8)
[12]: 'RX24' (32-bit XBGR 8-8-8-8)
[13]: 'XB24' (32-bit RGBX 8-8-8-8)
Tested on a imx6q-sabresd.
[laurent.pinchart@ideasonboard.com: Make loop counters unsigned]
[laurent.pinchart@ideasonboard.com: Decrement index instead of adding a counter]
[laurent.pinchart@ideasonboard.com: Return directly from within loop instead of breaking]
[slongerbeam@gmail.com: Fix colorspace comparison error]
Fixes: e130291212df5 ("[media] media: Add i.MX media core driver")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using DIV_ROUND_CLOSEST_ULL to
handle a 64-bit dividend.
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
While at it, change the log level from 'err' to 'debug'.
Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This makes it possible to declare dvb_usb_device_properties const.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made. Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.
If the transfer fails, an uninitialized value will be read from b2.
Addresses-Coverity: ("Unused value")
Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The first element of the key array is not used. Remove it, and
along with it a uninitialized memory read.
This should fix the rc debug message.
Link: https://www.spinics.net/lists/kernel/msg3374861.html
Suggested-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When built with:
CONFIG_USB=m
CONFIG_VIDEO_USBVISION=y
It causes ld errors:
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_write_reg_irq':
usbvision-core.c:(.text+0x8a4): undefined reference to `usb_submit_urb'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_isoc_irq':
usbvision-core.c:(.text+0x2ee8): undefined reference to `usb_submit_urb'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_read_reg':
usbvision-core.c:(.text+0x30ad): undefined reference to `usb_control_msg'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_write_reg':
usbvision-core.c:(.text+0x3178): undefined reference to `usb_control_msg'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_set_output':
usbvision-core.c:(.text+0x344e): undefined reference to `usb_control_msg'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_set_input':
usbvision-core.c:(.text+0x3b9b): undefined reference to `usb_control_msg'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_setup':
usbvision-core.c:(.text+0x4009): undefined reference to `usb_control_msg'
ld: drivers/staging/media/usbvision/usbvision-core.o:usbvision-core.c:(.text+0x417f): more undefined references to `usb_control_msg' follow
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_set_alternate':
usbvision-core.c:(.text+0x4518): undefined reference to `usb_set_interface'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_init_isoc':
usbvision-core.c:(.text+0x4673): undefined reference to `usb_alloc_urb'
ld: usbvision-core.c:(.text+0x46a5): undefined reference to `usb_alloc_coherent'
ld: usbvision-core.c:(.text+0x4765): undefined reference to `usb_submit_urb'
ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_stop_isoc':
usbvision-core.c:(.text+0x4837): undefined reference to `usb_kill_urb'
ld: usbvision-core.c:(.text+0x485f): undefined reference to `usb_free_coherent'
ld: usbvision-core.c:(.text+0x4874): undefined reference to `usb_free_urb'
ld: usbvision-core.c:(.text+0x48f1): undefined reference to `usb_set_interface'
ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_release':
usbvision-video.c:(.text+0x1a8a): undefined reference to `usb_free_urb'
ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_disconnect':
usbvision-video.c:(.text+0x1b74): undefined reference to `usb_put_dev'
ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_radio_close':
usbvision-video.c:(.text+0x1c89): undefined reference to `usb_set_interface'
ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_probe':
usbvision-video.c:(.text+0x1e4b): undefined reference to `usb_get_dev'
ld: usbvision-video.c:(.text+0x20e1): undefined reference to `usb_alloc_urb'
ld: usbvision-video.c:(.text+0x2797): undefined reference to `usb_put_dev'
ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_exit':
usbvision-video.c:(.exit.text+0x37): undefined reference to `usb_deregister'
ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_init':
usbvision-video.c:(.init.text+0xf9): undefined reference to `usb_register_driver'
ld: drivers/staging/media/usbvision/usbvision-i2c.o: in function `usbvision_i2c_write':
usbvision-i2c.c:(.text+0x2f4): undefined reference to `usb_control_msg'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
building it with a random config causes a warning:
WARNING: unmet direct dependencies detected for PHY_ROCKCHIP_DPHY_RX0
Depends on [n]: STAGING [=y] && STAGING_MEDIA [=y] && MEDIA_SUPPORT [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y]) && OF [=n]
Selected by [y]:
- VIDEO_ROCKCHIP_ISP1 [=y] && STAGING [=y] && STAGING_MEDIA [=y] && MEDIA_SUPPORT [=y] && VIDEO_V4L2 [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y])
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Linux 5.7-rc2
* tag 'v5.7-rc2': (331 commits)
Linux 5.7-rc2
mm: Fix MREMAP_DONTUNMAP accounting on VMA merge
xattr.h: Replace zero-length array with flexible-array member
uapi: linux: fiemap.h: Replace zero-length array with flexible-array member
uapi: linux: dlm_device.h: Replace zero-length array with flexible-array member
tpm_eventlog.h: Replace zero-length array with flexible-array member
ti_wilink_st.h: Replace zero-length array with flexible-array member
swap.h: Replace zero-length array with flexible-array member
skbuff.h: Replace zero-length array with flexible-array member
sched: topology.h: Replace zero-length array with flexible-array member
rslib.h: Replace zero-length array with flexible-array member
rio.h: Replace zero-length array with flexible-array member
posix_acl.h: Replace zero-length array with flexible-array member
platform_data: wilco-ec.h: Replace zero-length array with flexible-array member
memcontrol.h: Replace zero-length array with flexible-array member
list_lru.h: Replace zero-length array with flexible-array member
lib: cpu_rmap: Replace zero-length array with flexible-array member
irq.h: Replace zero-length array with flexible-array member
ihex.h: Replace zero-length array with flexible-array member
igmp.h: Replace zero-length array with flexible-array member
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two build fixes for a couple clk drivers and a fix for the Unisoc
serial clk where we want to keep it on for earlycon"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sprd: don't gate uart console clock
clk: mmp2: fix link error without mmp2
clk: asm9260: fix __clk_hw_register_fixed_rate_with_accuracy typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes/updates for the interrupt subsystem:
- Remove setup_irq() and remove_irq(). All users have been converted
so remove them before new users surface.
- A set of bugfixes for various interrupt chip drivers
- Add a few missing static attributes to address sparse warnings"
* tag 'irq-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() static
irqchip/irq-mvebu-icu: Make legacy_bindings static
irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order
irqchip/sifive-plic: Fix maximum priority threshold value
irqchip/ti-sci-inta: Fix processing of masked irqs
irqchip/mbigen: Free msi_desc on device teardown
irqchip/gic-v4.1: Update effective affinity of virtual SGIs
irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling
genirq: Remove setup_irq() and remove_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes: three in target, one on a sg error leg, two in qla2xxx
fixing warnings introduced in the last merge window and updating
MAINTAINERS and one in hisi_sas fixing a problem introduced by libata"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: add sg_remove_request in sg_common_write
scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN
scsi: target: fix PR IN / READ FULL STATUS for FC
scsi: target: Write NULL to *port_nexus_ptr if no ISID
scsi: MAINTAINERS: Update qla2xxx FC-SCSI driver maintainer
scsi: qla2xxx: Fix regression warnings
scsi: hisi_sas: Fix build error without SATA_HOST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix up chip IDs (isl68137)
- error handling for invalid temperatures and use true module name
(drivetemp)
- Fix static symbol warnings (k10temp)
- Use valid hwmon device name (jc42)
* tag 'hwmon-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (jc42) Fix name to have no illegal characters
hwmon: (k10temp) make some symbols static
hwmon: (drivetemp) Return -ENODATA for invalid temperatures
hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section
hwmon: (pmbus/isl68137) Fix up chip IDs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes and an old API removal now that all users are
gone"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Synchronize DMA before termination
i2c: tegra: Better handle case where CPU0 is busy for a long time
i2c: remove i2c_new_probed_device API
i2c: altera: use proper variable to hold errno
i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT
|
|
Pull drm fixes from Dave Airlie:
"Quiet enough for rc2, mostly amdgpu fixes, a couple of i915 fixes, and
one nouveau module firmware fix:
i915:
- Fix guest page access by using the brand new VFIO dma r/w interface (Yan)
- Fix for i915 perf read buffers (Ashutosh)
amdgpu:
- gfx10 fix
- SMU7 overclocking fix
- RAS fix
- GPU reset fix
- Fix a regression in a previous suspend/resume fix
- Add a gfxoff quirk
nouveau:
- fix missing MODULE_FIRMWARE"
* tag 'drm-fixes-2020-04-18' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/sec2/gv100-: add missing MODULE_FIRMWARE()
drm/amdgpu/gfx9: add gfxoff quirk
drm/amdgpu: fix the hw hang during perform system reboot and reset
drm/i915/gvt: switch to user vfio_group_pin/upin_pages
drm/i915/gvt: subsitute kvm_read/write_guest with vfio_dma_rw
drm/i915/gvt: hold reference of VFIO group during opening of vgpu
drm/i915/perf: Do not clear pollin for small user read buffers
drm/amdgpu: fix wrong vram lost counter increment V2
drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset
drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled
Revert "drm/amdgpu: change SH MEM alignment mode for gfx10"
|
|
The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:
jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix
This changes the name to "jc42" which doesn't have any illegal
characters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fix from Richard Weinberger:
"spi-nor: fix for missing directory after code refactoring"
* tag 'mtd/fixes-for-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: Compile files in controllers/ directory
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fix from Wim Van Sebroeck:
"Fix restart handler in sp805 driver"
* tag 'linux-watchdog-5.7-rc2' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sp805: fix restart handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix warnings from enabling more dtc warnings which landed in the
merge window and didn't get fixed in time.
- Fix some document references from DT schema conversions
- Fix kmemleak errors in DT unittests
* tag 'devicetree-fixes-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
kbuild: check libyaml installation for 'make dt_binding_check'
of: unittest: kmemleak in duplicate property update
of: overlay: kmemleak in dup_and_fixup_symbol_prop()
of: unittest: kmemleak in of_unittest_overlay_high_level()
of: unittest: kmemleak in of_unittest_platform_populate()
of: unittest: kmemleak on changeset destroy
MAINTAINERS: dt: fix pointers for ARM Integrator, Versatile and RealView
MAINTAINERS: dt: update display/allwinner file entry
dt-bindings: iio: dac: AD5570R fix bindings errors
dt-bindings: Fix misspellings of "Analog Devices"
dt-bindings: pwm: Fix cros-ec-pwm example dtc 'reg' warning
docs: dt: rockchip,dwc3.txt: fix a pointer to a renamed file
docs: dt: fix a broken reference for a file converted to json
docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file
docs: dt: fix broken reference to phy-cadence-torrent.yaml
dt-bindings: interrupt-controller: Fix loongson,parent_int_map property schema
dt-bindings: hwmon: Fix incorrect $id paths
dt-bindings: Fix dtc warnings on reg and ranges in examples
dt-bindings: BD718x7 - add missing I2C bus properties
dt-bindings: clock: syscon-icst: Remove unneeded unit name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen update from Juergen Gross:
- a small cleanup patch
- a security fix for a bug in the Xen hypervisor to avoid enabling Xen
guests to crash dom0 on an unfixed hypervisor.
* tag 'for-linus-5.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: make _xen_start_info static
xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
|
|
Pull block fixes from Jens Axboe:
- Fix for a driver tag leak in error handling (John)
- Remove now defunct Kconfig selection from dasd (Stefan)
- blk-wbt trace fiexs (Tommi)
* tag 'block-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
blk-wbt: Drop needless newlines from tracepoint format strings
blk-wbt: Use tracepoint_string() for wbt_step tracepoint string literals
s390/dasd: remove IOSCHED_DEADLINE from DASD Kconfig
blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget
|
|
Pull libata fixlet from Jens Axboe:
"Add yet another Comet Lake PCI ID for ahci"
* tag 'libata-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
ahci: Add Intel Comet Lake PCH-U PCI ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management update from Rafael Wysocki:
"Allow the operating performance points (OPP) core to be used in the
case when the same driver is used on different platforms, some of
which have an OPP table and some of which have a clock node (Rajendra
Nayak)"
* tag 'pm-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Manage empty OPP tables with clk handle
|
