summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-03-24Merge branch 'sh-latest' of ↵Linus Torvalds3-99/+65
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix build alloc_thread_info_node function sh: Fix ptrace hw_breakpoint handling sh: Fix ptrace fpu state initialisation sh: Re-enable GENERIC_HARDIRQS_NO_DEPRECATED. sh: pmb: Use struct syscore_ops instead of sysdevs sh: Use struct syscore_ops instead of sysdevs sh: Conver to asm-generic/sizes.h. sh: wire up sys_syncfs.
2011-03-24Merge branch 'usb-linus' of ↵Linus Torvalds8-28/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: cdc-acm: fix potential null-pointer dereference on disconnect USB: cdc-acm: fix potential null-pointer dereference USB: cdc-acm: fix memory corruption / panic USB: Fix 'bad dma' problem on WDM device disconnect usb: wwan: fix compilation without CONFIG_PM_RUNTIME USB: uss720 fixup refcount position usb: musb: blackfin: fix typo in new bfin_musb_vbus_status func usb: musb: blackfin: fix typo in new dev_pm_ops struct usb: musb: blackfin: fix typo in platform driver name usb: musb: Fix for merge issue ehci-hcd: Bug fix: don't set a QH's Halt bit USB: Do not pass negative length to snoop_urb()
2011-03-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds374-18876/+68358
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits) [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE [media] v4l: soc-camera: Store negotiated buffer settings [media] rc: interim support for 32-bit NEC-ish scancodes [media] mceusb: topseed 0x0011 needs gen3 init for tx to work [media] lirc_zilog: error out if buffer read bytes != chunk size [media] lirc: silence some compile warnings [media] hdpvr: use same polling interval as other OS [media] ir-kbd-i2c: pass device code w/key in hauppauge case [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping [media] rc-rc5-hauppauge-new: Add support for the old Black RC [media] rc-rc5-hauppauge-new: Add the old control to the table [media] rc-winfast: Fix the keycode tables [media] a800: Fix a few wrong IR key assignments [media] opera1: Use multimedia keys instead of an app-specific mapping [media] dw2102: Use multimedia keys instead of an app-specific mapping ... Fix up trivial conflicts (remove/modify and some real conflicts) in: arch/arm/mach-omap2/devices.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/dabusb/dabusb.c drivers/staging/dabusb/dabusb.h drivers/staging/easycap/easycap_ioctl.c drivers/staging/usbvideo/usbvideo.c drivers/staging/usbvideo/vicam.c
2011-03-24Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds5-55/+52
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: Add loopback support for the SPI on 5500 spi/omap_mcspi: Fix broken last word xfer of/flattree: minor cleanups dt: eliminate OF_NO_DEEP_PROBE and test for NULL match table dt: protect against NULL matches passed to of_match_node() dt: Refactor of_platform_bus_probe()
2011-03-24Merge branch 'idle-release' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: Rename cpuidle states
2011-03-24Merge branch 'release' of ↵Linus Torvalds38-2311/+2731
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (42 commits) ACPI: minor printk format change in acpi_pad ACPI: make acpi_pad /sys output more readable ACPICA: Update version to 20110316 ACPICA: Header support for SLIC table ACPI: Make sure the FADT is at least rev 2 before using the reset register ACPI: Bug compatibility for Windows on the ACPI reboot vector ACPICA: Fix access width for reset vector ACPI battery: fribble sysfs files from a resume notifier ACPI button: remove unused procfs I/F ACPI, APEI, Add PCIe AER error information printing support PCIe, AER, use pre-generated prefix in error information printing ACPI, APEI, Add ERST record ID cache ACPI: Use syscore_ops instead of sysdev class and sysdev ACPI: Remove the unused EC sysdev class ACPI: use __cpuinit for the acpi_processor_set_pdc() call tree ACPI: use __init where possible in processor driver Thermal_Framework-Fix_crash_during_hwmon_unregister ACPICA: Update version to 20110211. ACPICA: Add mechanism to defer _REG methods for some installed handlers ACPICA: Add support for FunctionalFixedHW in acpi_ut_get_region_name ...
2011-03-24Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds1-2/+2
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBIFS: fix assertion warning and refine comments UBIFS: kill CONFIG_UBIFS_FS_DEBUG_CHKS UBIFS: use GFP_NOFS properly UBI: use GFP_NOFS properly
2011-03-24Merge branch 'for-linus' of ↵Linus Torvalds7-252/+524
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Increase DMA max_segment_size on Mellanox hardware IB/mad: Improve an error message so error code is included RDMA/nes: Don't print success message at level KERN_ERR RDMA/addr: Fix return of uninitialized ret value IB/srp: try to use larger FMR sizes to cover our mappings IB/srp: add support for indirect tables that don't fit in SRP_CMD IB/srp: rework mapping engine to use multiple FMR entries IB/srp: allow sg_tablesize to be set for each target IB/srp: move IB CM setup completion into its own function IB/srp: always avoid non-zero offsets into an FMR
2011-03-24Merge branch 'for-next' of ↵Linus Torvalds82-721/+4884
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (90 commits) mfd: Push byte swaps out of wm8994 bulk read path mfd: Rename ab8500 gpadc header mfd: Constify WM8994 write path mfd: Push byte swap out of WM8994 bulk I/O mfd: Avoid copying data in WM8994 I2C write mfd: Remove copy from WM831x I2C write function mfd: Staticise WM8994 PM ops regulator: Add a subdriver for TI TPS6105x regulator portions v2 mfd: Add a core driver for TI TPS61050/TPS61052 chips v2 gpio: Add Tunnel Creek support to sch_gpio mfd: Add Tunnel Creek support to lpc_sch pci_ids: Add Intel Tunnel Creek LPC Bridge device ID. regulator: MAX8997/8966 support mfd: Add WM8994 bulk register write operation mfd: Append additional read write on 88pm860x mfd: Adopt mfd_data in 88pm860x input driver mfd: Adopt mfd_data in 88pm860x regulator mfd: Adopt mfd_data in 88pm860x led mfd: Adopt mfd_data in 88pm860x backlight mfd: Fix MAX8997 Kconfig entry typos ...
2011-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds58-1884/+5614
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (140 commits) MAINTAINERS: de-orphan fbdev. MAINTAINERS: Add file pattern for fb dt bindings. video: Move sm501fb devicetree binding documentation to a better place. fbcon: fix situation where fbcon gets deinitialised and can't reinit. video, sm501: add OF binding to support SM501 video, sm501: add edid and commandline support video, sm501: add I/O functions for use on powerpc video: Fix EDID macros H_SYNC_WIDTH and H_SYNC_OFFSET fbcon: Bugfix soft cursor detection in Tile Blitting video: add missing framebuffer_release in error path video: metronomefb: add __devexit_p around reference to metronomefb_remove video: hecubafb: add __devexit_p around reference to hecubafb_remove drivers:video:aty:radeon_base Fix typo occationally to occasionally atmel_lcdfb: add fb_blank function atmel_lcdfb: implement inverted contrast pwm video: s3c-fb: return proper error if clk_get fails uvesafb,vesafb: create WC or WB PAT-entries video: ffb: fix ffb_probe error path radeonfb: Let hwmon driver probe the "monid" I2C bus fbdev: sh_mobile_lcdc: checking NULL instead of IS_ERR() ...
2011-03-24UBI: use GFP_NOFS properlyArtem Bityutskiy1-2/+2
This patch fixes a brown-paperbag bug which was introduced by me: I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make sure my allocations do not cause write-back. But the correct form is "GFP_NOFS". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-24Merge branch 'master' of ↵Paul Mundt138-2085/+7178
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest
2011-03-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-13/+90
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ...
2011-03-23spi/pl022: Add loopback support for the SPI on 5500Philippe Langlais1-1/+19
Extend the vendor data with a loopback field, and add new amba-pl022 vendor data for the DB5500 pl023, as the pl023 on db8500 and db5500 vary. Signed-off-by: Prajadevi H <prajadevi.h@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-23userns: security: make capabilities relative to the user namespaceSerge E. Hallyn1-1/+1
- Introduce ns_capable to test for a capability in a non-default user namespace. - Teach cap_capable to handle capabilities in a non-default user namespace. The motivation is to get to the unprivileged creation of new namespaces. It looks like this gets us 90% of the way there, with only potential uid confusion issues left. I still need to handle getting all caps after creation but otherwise I think I have a good starter patch that achieves all of your goals. Changelog: 11/05/2010: [serge] add apparmor 12/14/2010: [serge] fix capabilities to created user namespaces Without this, if user serge creates a user_ns, he won't have capabilities to the user_ns he created. THis is because we were first checking whether his effective caps had the caps he needed and returning -EPERM if not, and THEN checking whether he was the creator. Reverse those checks. 12/16/2010: [serge] security_real_capable needs ns argument in !security case 01/11/2011: [serge] add task_ns_capable helper 01/11/2011: [serge] add nsown_capable() helper per Bastian Blank suggestion 02/16/2011: [serge] fix a logic bug: the root user is always creator of init_user_ns, but should not always have capabilities to it! Fix the check in cap_capable(). 02/21/2011: Add the required user_ns parameter to security_capable, fixing a compile failure. 02/23/2011: Convert some macros to functions as per akpm comments. Some couldn't be converted because we can't easily forward-declare them (they are inline if !SECURITY, extern if SECURITY). Add a current_user_ns function so we can use it in capability.h without #including cred.h. Move all forward declarations together to the top of the #ifdef __KERNEL__ section, and use kernel-doc format. 02/23/2011: Per dhowells, clean up comment in cap_capable(). 02/23/2011: Per akpm, remove unreachable 'return -EPERM' in cap_capable. (Original written and signed off by Eric; latest, modified version acked by him) [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: export current_user_ns() for ecryptfs] [serge.hallyn@canonical.com: remove unneeded extra argument in selinux's task_has_capability] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: fix potential null deref on failure pathDan Carpenter1-1/+1
If rio is not a switch then "rswitch" is null. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: remove mport resource reservation from common RIO codeAlexandre Bounine1-13/+1
Removes resource reservation from the common sybsystem initialization code and make it part of mport driver initialization. This resolves conflict with resource reservation by device specific mport drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: modify mport ID assignmentAlexandre Bounine1-0/+26
Changes mport ID and host destination ID assignment to implement unified method common to all mport drivers. Makes "riohdid=" kernel command line parameter common for all architectures with support for more that one host destination ID assignment. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: modify subsystem and driver initialization sequenceAlexandre Bounine2-3/+5
Subsystem initialization sequence modified to support presence of multiple RapidIO controllers in the system. The new sequence is compatible with initialization of PCI devices. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: modify configuration to support PCI-SRIO controllerAlexandre Bounine2-2/+3
1. Add an option to include RapidIO support if the PCI is available. 2. Add FSL_RIO configuration option to enable controller selection. 3. Add RapidIO support option into x86 and MIPS architectures. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: add architecture specific callbacksAlexandre Bounine1-12/+26
This set of patches eliminates RapidIO dependency on PowerPC architecture and makes it available to other architectures (x86 and MIPS). It also enables support of new platform independent RapidIO controllers such as PCI-to-SRIO and PCI Express-to-SRIO. This patch: Extend number of mport callback functions to eliminate direct linking of architecture specific mport operations. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: add new sysfs attributesAlexandre Bounine1-1/+40
Add new sysfs attributes. 1. Routing information required to to reach the RIO device: destid - device destination ID (real for for endpoint, route for switch) hopcount - hopcount for maintenance requests (switches only) 2. device linking information: lprev - name of device that precedes the given device in the enumeration or discovery order (displayed along with of the port to which it is attached). lnext - names of devices (with corresponding port numbers) that are attached to the given device as next in the enumeration or discovery order (switches only) Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/char/mem.c: clean up the codeChangli Gao1-4/+1
Reduce the lines of code and simplify the logic. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/staging/tty/specialix.c: convert func_enter to func_exitJulia Lawall1-4/+4
Convert calls to func_enter on leaving a function to func_exit. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - func_enter(); + func_exit(); return...; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Roger Wolff <R.E.Wolff@BitWizard.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/tty/bfin_jtag_comm.c: avoid calling put_tty_driver on NULLJulia Lawall1-2/+4
put_tty_driver calls tty_driver_kref_put on its argument, and then tty_driver_kref_put calls kref_put on the address of a field of this argument. kref_put checks for NULL, but in this case the field is likely to have some offset and so the result of taking its address will not be NULL. Labels are added to be able to skip over the call to put_tty_driver when the argument will be NULL. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; @@ *if (x == NULL) { ... * put_tty_driver(x); ... return ...; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Torben Hohn <torbenh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/char: add MSM smd_pkt driverNiranjana Vishwanathapura3-0/+475
Add smd_pkt driver which provides device interface to smd packet ports. Signed-off-by: Niranjana Vishwanathapura <nvishwan@codeaurora.org> Cc: Brian Swetland <swetland@google.com> Cc: Greg KH <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/char/ipmi/ipmi_si_intf.c: fix cleanup_one_si section mismatchSergey Senozhatsky1-1/+1
commit d2478521afc2022 ("char/ipmi: fix OOPS caused by pnp_unregister_driver on unregistered driver") introduced a section mismatch by calling __exit cleanup_ipmi_si from __devinit init_ipmi_si. Remove __exit annotation from cleanup_ipmi_si. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23dm: use little-endian bitopsAkinobu Mita1-4/+4
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23md: use little-endian bitopsAkinobu Mita1-3/+3
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23Revert "drm/i915: Don't save/restore hardware status page address register"Chris Wilson2-0/+7
This reverts commit a7a75c8f70d6f6a2f16c9f627f938bbee2d32718. There are two different variations on how Intel hardware addresses the "Hardware Status Page". One as a location in physical memory and the other as an offset into the virtual memory of the GPU, used in more recent chipsets. (The HWS itself is a cacheable region of memory which the GPU can write to without requiring CPU synchronisation, used for updating various details of hardware state, such as the position of the GPU head in the ringbuffer, the last breadcrumb seqno, etc). These two types of addresses were updated in different locations of code - one inline with the ringbuffer initialisation, and the other during device initialisation. (The HWS page is logically associated with the rings, and there is one HWS page per ring.) During resume, only the ringbuffers were being re-initialised along with the virtual HWS page, leaving the older physical address HWS untouched. This then caused a hang on the older gen3/4 (915GM, 945GM, 965GM) the first time we tried to synchronise the GPU as the breadcrumbs were never being updated. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Jan Niehusmann <jan@gondor.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-and-tested-by: Michael "brot" Groh <brot@minad.de> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23spi/omap_mcspi: Fix broken last word xferJarkko Nikula1-3/+3
Commit adef658 "spi/omap_mcspi: catch xfers of non-multiple SPI word size" broke the transmission of last word in cases where access is multiple of word size and word size is 16 or 32 bits. Fix this by replacing the test "c > (word_len>>3)" in do-while loops with "c >= 'pointer increment size'". This ensures that the last word is transmitted in above case and still allow to break the loop and prevent variable c underflow in cases where word size != 'pointer increment size'. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Sourav Poddar<sourav.poddar@ti.com> Acked-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-23of/flattree: minor cleanupsAndres Salomon1-2/+4
- static-ize some functions - add some additional comments Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-23dt: eliminate OF_NO_DEEP_PROBE and test for NULL match tableGrant Likely1-12/+5
There are no users of OF_NO_DEEP_PROBE, and of_match_node() now gracefully handles being passed a NULL pointer, so the checks at the top of of_platform_bus_probe can be dropped. While at it, consolidate the root node pointer check to be easier to read and tidy up related comments. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-23dt: protect against NULL matches passed to of_match_node()Grant Likely1-0/+3
There are a few use cases where it is convenient to pass NULL to of_match_node() and have it fail gracefully. The patch adds a null check to the beginning so taht it does so. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-23dt: Refactor of_platform_bus_probe()Grant Likely1-37/+18
The current implementation uses three copies of of basically identical code. This patch consolidates them to make the code simpler. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-23USB: cdc-acm: fix potential null-pointer dereference on disconnectJohan Hovold1-1/+2
Fix potential null-pointer exception on disconnect introduced by commit 11ea859d64b69a747d6b060b9ed1520eab1161fe (USB: additional power savings for cdc-acm devices that support remote wakeup). Only access acm->dev after making sure it is non-null in control urb completion handler. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: cdc-acm: fix potential null-pointer dereferenceJohan Hovold1-0/+2
Must check return value of tty_port_tty_get. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: cdc-acm: fix memory corruption / panicJohan Hovold1-0/+2
Prevent read urbs from being resubmitted from tasklet after port close. The receive tasklet was not disabled on port close, which could lead to corruption of receive lists on consecutive port open. In particular, read urbs could be re-submitted before port open, added to free list in open, and then added a second time to the free list in the completion handler. cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: set line: 115200 0 0 8 cdc-acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7 cdc-acm.c: acm_tty_close cdc-acm.c: acm_port_down cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0 cdc-acm.c: acm_ctrl_irq - urb shutting down with status: -2 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da400, rcv 0xf57fbbe8, buf 0xf57fbd28 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da480, rcv 0xf57fbbd4, buf 0xf57fbd14 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da900, rcv 0xf57fbbc0, buf 0xf57fbd00 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da980, rcv 0xf57fbbac, buf 0xf57fbcec cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa00, rcv 0xf57fbb98, buf 0xf57fbcd8 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa80, rcv 0xf57fbb84, buf 0xf57fbcc4 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab00, rcv 0xf57fbb70, buf 0xf57fbcb0 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab80, rcv 0xf57fbb5c, buf 0xf57fbc9c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac00, rcv 0xf57fbb48, buf 0xf57fbc88 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac80, rcv 0xf57fbb34, buf 0xf57fbc74 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad00, rcv 0xf57fbb20, buf 0xf57fbc60 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad80, rcv 0xf57fbb0c, buf 0xf57fbc4c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da880, rcv 0xf57fbaf8, buf 0xf57fbc38 cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: Entering acm_tty_write to write 3 bytes, cdc-acm.c: Get 3 bytes... cdc-acm.c: acm_write_start susp_count: 0 cdc-acm.c: Entering acm_read_bulk with status 0 ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbc10, but was f57fbaf8 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dbf>] acm_rx_tasklet+0xef/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082e ]--- ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbd50, but was f57fbdb0 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dd6>] acm_rx_tasklet+0x106/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082f ]--- cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: disconnected from network cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: Entering acm_rx_tasklet ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:48 list_del+0xd5/0x120() Hardware name: Vostro 1520 list_del corruption, next is LIST_POISON1 (00100100) Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd875>] ? list_del+0xd5/0x120 [<c11dd875>] ? list_del+0xd5/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd875>] list_del+0xd5/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f00830 ]--- BUG: unable to handle kernel paging request at 00200200 IP: [<c11dd7bd>] list_del+0x1d/0x120 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/tty/ttyACM0/uevent Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 0T816J/Vostro 1520 EIP: 0060:[<c11dd7bd>] EFLAGS: 00010046 CPU: 0 EIP is at list_del+0x1d/0x120 EAX: f57fbd3c EBX: f57fb800 ECX: ffff8000 EDX: 00200200 ESI: f57fbe90 EDI: f57fbd3c EBP: f600bf54 ESP: f600bf3c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process ksoftirqd/0 (pid: 3, ti=f600a000 task=f60791c0 task.ti=f6082000) Stack: c1527e84 00000030 c1527e54 00100100 f57fb800 f57fbd3c f600bf98 f8051fac f8053104 f8052b94 f600bf6c c106dbab f600bf80 00000286 f60791c0 c1042b30 f57fbda8 f57f5800 f57fbdb0 f57fbd80 f57fbe7c c1656b04 00000000 f600bfb0 Call Trace: [<f8051fac>] ? acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] ? tasklet_action+0xe6/0x140 [<c104342f>] ? __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 Code: ff 48 14 e9 57 ff ff ff 90 90 90 90 90 90 55 89 e5 83 ec 18 81 38 00 01 10 00 0f 84 9c 00 00 00 8b 50 04 81 fa 00 02 20 00 74 33 <8b> 12 39 d0 75 5c 8b 10 8b 4a 04 39 c8 0f 85 b5 00 00 00 8b 48 EIP: [<c11dd7bd>] list_del+0x1d/0x120 SS:ESP 0068:f600bf3c CR2: 0000000000200200 ---[ end trace efd9a11434f00831 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 3, comm: ksoftirqd/0 Tainted: G D W 2.6.37+ #39 Call Trace: [<c13fede1>] ? printk+0x1d/0x24 [<c13fecce>] panic+0x66/0x15c [<c10067df>] oops_end+0x8f/0x90 [<c1025476>] no_context+0xc6/0x160 [<c10255a8>] __bad_area_nosemaphore+0x98/0x140 [<c103cf68>] ? release_console_sem+0x1d8/0x210 [<c1025667>] bad_area_nosemaphore+0x17/0x20 [<c1025a49>] do_page_fault+0x279/0x420 [<c1006a8f>] ? show_trace+0x1f/0x30 [<c13fede1>] ? printk+0x1d/0x24 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c140333b>] error_code+0x5f/0x64 [<c103007b>] ? select_task_rq_fair+0x37b/0x6a0 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c11dd7bd>] ? list_del+0x1d/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 panic occurred, switching back to text console ------------[ cut here ]------------ Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: Fix 'bad dma' problem on WDM device disconnectRobert Lukassen1-1/+1
In the WDM class driver a disconnect event leads to calls to usb_free_coherent to put back two USB DMA buffers allocated earlier. The call to usb_free_coherent uses a different size parameter (desc->wMaxCommand) than the corresponding call to usb_alloc_coherent (desc->bMaxPacketSize0). When a disconnect event occurs, this leads to 'bad dma' complaints from usb core because the USB DMA buffer is being pushed back to the 'buffer-2048' pool from which it has not been allocated. This patch against the most recent linux-2.6 kernel ensures that the parameters used by usb_alloc_coherent & usb_free_coherent calls in cdc-wdm.c match. Signed-off-by: Robert Lukassen <robert.lukassen@tomtom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: wwan: fix compilation without CONFIG_PM_RUNTIMEOliver Neukum1-2/+1
The pm usage counter must be accessed with the proper wrappers to allow compilation under all configurations. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: uss720 fixup refcount positionPeter Holik1-4/+3
My testprog do a lot of bitbang - after hours i got following warning and my machine lockups: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 After debugging uss720 driver i discovered that the completion callback was called before usb_submit_urb returns. The callback frees the request structure that is krefed on return by usb_submit_urb. Signed-off-by: Peter Holik <peter@holik.at> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new bfin_musb_vbus_status funcMike Frysinger1-1/+1
The common code has a "get" in the middle, but each implementation does not have it. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new dev_pm_ops structBob Liu1-1/+1
Cc: stable@kernel.org Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in platform driver nameMike Frysinger1-1/+1
The modularization of the Blackfin driver set the name to "musb-blackfin" in all the boards, but "musb-bfin" in the driver itself. Since the driver file name uses "blackfin", change the driver to "musb-blackfin". This is also easier as it's only one file to change. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: Fix for merge issueHema HK1-4/+4
There was conflict while merging 2 patches. Enabling vbus code is wrongly moved to error check if loop. This is a fix to resolve the merge issue. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23ehci-hcd: Bug fix: don't set a QH's Halt bitAlan Stern1-12/+0
This patch (as1453) fixes a long-standing bug in the ehci-hcd driver. There is no need to set the Halt bit in the overlay region for an unlinked or blocked QH. Contrary to what the comment says, setting the Halt bit does not cause the QH to be patched later; that decision (made in qh_refresh()) depends only on whether the QH is currently pointing to a valid qTD. Likewise, setting the Halt bit does not prevent completions from activating the QH while it is "stopped"; they are prevented by the fact that qh_completions() temporarily changes qh->qh_state to QH_STATE_COMPLETING. On the other hand, there are circumstances in which the QH will be reactivated _without_ being patched; this happens after an URB beyond the head of the queue is unlinked. Setting the Halt bit will then cause the hardware to see the QH with both the Active and Halt bits set, an invalid combination that will prevent the queue from advancing and may even crash some controllers. Apparently the only reason this hasn't been reported before is that unlinking URBs from the middle of a running queue is quite uncommon. However Test 17, recently added to the usbtest driver, does exactly this, and it confirms the presence of the bug. In short, there is no reason to set the Halt bit for an unlinked or blocked QH, and there is a very good reason not to set it. Therefore the code that sets it is removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andiry Xu <andiry.xu@amd.com> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: Do not pass negative length to snoop_urb()Michal Sojka1-1/+1
When `echo Y > /sys/module/usbcore/parameters/usbfs_snoop` and usb_control_msg() returns error, a lot of kernel memory is dumped to dmesg until unhandled kernel paging request occurs. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23Merge branches 'misc', 'nes' and 'srp' into for-nextRoland Dreier3-250/+515
2011-03-23sh: Use struct syscore_ops instead of sysdevsRafael J. Wysocki3-99/+65
Convert the SuperH clocks framework and shared interrupt handling code to using struct syscore_ops instead of a sysdev classes and sysdevs for power managment. This reduces the code size significantly and simplifies it. The optimizations causing things not to be restored after creating a hibernation image are removed, but they might lead to undesirable effects during resume from hibernation (e.g. the clocks would be left as the boot kernel set them, which might be not the same way as the hibernated kernel had seen them before the hibernation). This also is necessary for removing sysdevs from the kernel entirely in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-23mfd: Push byte swaps out of wm8994 bulk read pathMark Brown2-7/+9
For consistency with the write path push byte swaps of the WM8994 register data out of the bulk read data path into the per-register APIs. The only user of the bulk register read is the interrupt code which is updated to do the swaps itself part of this patch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 14:37:48 +0000