summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-06-21Merge tag 'pinctrl-v5.8-2' of ↵Linus Torvalds6-23/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some early fixes collected during the first week after the merge window, all pretty self-evident, with the details below. The revert is the crucial thing. - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated twice without a unique irqchip struct - Use the noirq variants of the suspend and resume callbacks in the Tegra driver - Clean up the errorpath on the MCP23s08 driver - Revert the use of devm_of_iomap() in the Freescale driver as it was regressing the platform - Add some missing pins in the Qualcomm IPQ6018 driver - Fix a simple documentation bug in the pinctrl-single driver" * tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: fix function name in documentation pinctrl: qcom: ipq6018 Add missing pins in qpic pin group Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings pinctrl: tegra: Use noirq suspend/resume callbacks pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
2020-06-21Merge branch 'linus' of ↵Linus Torvalds8-25/+39
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - NULL dereference in octeontx - PM reference imbalance in ks-sa - deadlock in crypto manager - memory leak in drbg - missing socket limit check on receive SG list size in algif_skcipher - typos in caam - warnings in ccp and hisilicon * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - always try to free Jitter RNG instance crypto: marvell/octeontx - Fix a potential NULL dereference crypto: algboss - don't wait during notifier callback crypto: caam - fix typos crypto: ccp - Fix sparse warnings in sev-dev crypto: hisilicon - Cap block size at 2^31 crypto: algif_skcipher - Cap recv SG list at ctx->used hwrng: ks-sa - Fix runtime PM imbalance on error
2020-06-20Merge tag 'scsi-fixes' of ↵Linus Torvalds9-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error
2020-06-20Merge branch 'i2c/for-current' of ↵Linus Torvalds4-38/+8
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules
2020-06-20pinctrl: single: fix function name in documentationDrew Fustini1-1/+1
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge tag 'libnvdimm-for-5.8-rc2' of ↵Linus Torvalds1-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "A feature (papr_scm health retrieval) and a fix (sysfs attribute visibility) for v5.8. Vaibhav explains in the merge commit below why missing v5.8 would be painful and I agreed to try a -rc2 pull because only cosmetics kept this out of -rc1 and his initial versions were posted in more than enough time for v5.8 consideration: 'These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months' Summary: - Fix the visibility of the region 'align' attribute. The new unit tests for region alignment handling caught a corner case where the alignment cannot be specified if the region is converted from static to dynamic provisioning at runtime. - Add support for device health retrieval for the persistent memory supported by the papr_scm driver. This includes both the standard sysfs "health flags" that the nfit persistent memory driver publishes and a mechanism for the ndctl tool to retrieve a health-command payload" * tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/region: always show the 'align' attribute powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl() powerpc/papr_scm: Fetch nvdimm health information from PHYP seq_buf: Export seq_buf_printf powerpc: Document details on H_SCM_HEALTH hcall
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan1-1/+2
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource ↵Haibo Chen1-4/+3
leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge tag 's390-5.8-2' of ↵Linus Torvalds5-94/+47
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update
2020-06-19Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-15/+36
Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce
2020-06-19Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-13/+18
Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases
2020-06-19Merge tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds28-429/+828
Pull drm fixes from Dave Airlie: "Just i915 and amd here. i915 has some workaround movement so they get applied at the right times, and a timeslicing fix, along with some display fixes. AMD has a few display floating point fix and a devcgroup fix for amdkfd. i915: - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix" * tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amdgpu: fix documentation around busy_percentage drm/amdgpu/pm: update comment to clarify Overdrive interfaces drm/amdkfd: Use correct major in devcgroup check drm/i915/display: Fix the encoder type check drm/i915/icl+: Fix hotplug interrupt disabling after storm detection drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move snb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workarounds drm/i915/icl: Disable DIP on MST ports with the transcoder clock still on drm/i915/gt: Incrementally check for rewinding drm/i915/tc: fix the reset of ln0 drm/i915/gt: Prevent timeslicing into unpreemptable requests drm/i915/selftests: Restore to default heartbeat drm/i915: work around false-positive maybe-uninitialized warning drm/i915/pmu: avoid an maybe-uninitialized warning drm/i915/gt: Incorporate the virtual engine into timeslicing drm/amd/display: Rework dsc to isolate FPU operations ...
2020-06-19Merge tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds1-1/+3
Pull ceph fixes from Ilya Dryomov: "An important follow-up for replica reads support that went into -rc1 and two target_copy() fixups" * tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client: libceph: don't omit used_replica in target_copy() libceph: don't omit recovery_deletes in target_copy() libceph: move away from global osd_req_flags
2020-06-19i2c: smbus: Fix spelling mistake in the commentsKeyur Patel1-1/+1
Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel <iamkeyur96@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19i2c: remove deprecated i2c_new_device APIWolfram Sang1-25/+0
All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19video: backlight: tosa_lcd: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19drm: encoder_slave: use new I2C APIWolfram Sang1-8/+2
i2c_new_client() is deprecated, use the replacement i2c_new_client_device(). Also, we have a helper to check if a driver is bound. Use it to simplify the code. Note that this changes the errno for a failed device creation from ENOMEM to ENODEV. No callers currently interpret this errno, though, so we use this condensed error check. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19drm: encoder_slave: fix refcouting error for modulesWolfram Sang1-2/+3
module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19Merge tag 'amd-drm-fixes-5.8-2020-06-17' of ↵Dave Airlie9-56/+160
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-06-17: amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617220733.3773183-1-alexander.deucher@amd.com
2020-06-18Merge branch 'hch' (maccess patches from Christoph Hellwig)Linus Torvalds5-8/+10
Merge non-faulting memory access cleanups from Christoph Hellwig: "Andrew and I decided to drop the patches implementing your suggested rename of the probe_kernel_* and probe_user_* helpers from -mm as there were way to many conflicts. After -rc1 might be a good time for this as all the conflicts are resolved now" This also adds a type safety checking patch on top of the renaming series to make the subtle behavioral difference between 'get_user()' and 'get_kernel_nofault()' less potentially dangerous and surprising. * emailed patches from Christoph Hellwig <hch@lst.de>: maccess: make get_kernel_nofault() check for minimal type compatibility maccess: rename probe_kernel_address to get_kernel_nofault maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
2020-06-18loop: replace kill_bdev with invalidate_bdevZheng Bin1-4/+4
When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18libata: Use per port sync for detachKai-Heng Feng1-6/+5
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17drm/amdgpu: fix documentation around busy_percentageAlex Deucher1-1/+1
Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdgpu/pm: update comment to clarify Overdrive interfacesAlex Deucher1-1/+1
Vega10 and previous asics use one interface, vega20 and newer use another. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-17drm/amdkfd: Use correct major in devcgroup checkLorenz Brun1-1/+2
The existing code used the major version number of the DRM driver instead of the device major number of the DRM subsystem for validating access for a devices cgroup. This meant that accesses allowed by the devices cgroup weren't permitted and certain accesses denied by the devices cgroup were permitted (if they matched the wrong major device number). Signed-off-by: Lorenz Brun <lorenz@brun.one> Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup") Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-17nvdimm/region: always show the 'align' attributeVishal Verma1-12/+2
It is possible that a platform that is capable of 'namespace labels' comes up without the labels properly initialized. In this case, the region's 'align' attribute is hidden. Howerver, once the user does initialize he labels, the 'align' attribute still stays hidden, which is unexpected. The sysfs_update_group() API is meant to address this, and could be called during region probe, but it has entanglements with the device 'lockdep_mutex'. Therefore, simply make the 'align' attribute always visible. It doesn't matter what it says for label-less namespaces, since it is not possible to change their allocation anyway. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-06-17s390/qdio: warn about unexpected SLSB statesJulian Wiedmann1-5/+11
The way we produce SBALs to the device (first update q->nr_buf_used, then update the SLSB) should ensure that we never see some of the SLSB states when scanning the queue for progress. So make some noise if we do, this implies a bug in our SBAL tracking. Also tweak the WARN msg to provide more information. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17s390/qdio: clean up usage of qdio_dataJulian Wiedmann1-10/+7
This removes the last remaining accesses to ->qdio_data from internal code. Just pass the qdio_irq struct where needed instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig5-8/+10
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds18-199/+152
Pull networking fixes from David Miller: 1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo, fix from Stefano Brivio. 2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso. 3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang. 4) Accidently disabling NAPI in non-error paths of macb_open(), from Charles Keepax. 5) Fix races between alx_stop and alx_remove, from Zekun Shen. 6) We forget to re-enable SRIOV during resume in bnxt_en driver, from Michael Chan. 7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai. 8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen. 9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei Yongjun. 10) We should not adjust the TCP window advertised when sending dup acks in non-SACK mode, because it won't be counted as a dup by the sender if the window size changes. From Eric Dumazet. 11) Destroy the right number of queues during remove in mvpp2 driver, from Sven Auhagen. 12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav Gupta, and Arnd Bergmann. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) e1000e: fix unused-function warning e1000: use generic power management e1000e: Do not wake up the system via WOL if device wakeup is disabled lan743x: add MODULE_DEVICE_TABLE for module loading alias mlxsw: spectrum: Adjust headroom buffers for 8x ports bareudp: Fixed configuration to avoid having garbage values mvpp2: remove module bugfix tcp: grow window for OOO packets only for SACK flows mptcp: fix memory leak in mptcp_subflow_create_socket() netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles mvpp2: ethtool rxtx stats fix MAINTAINERS: switch to my private email for Renesas Ethernet drivers rocker: fix incorrect error handling in dma_rings_init test_objagg: Fix potential memory leak in error handling net: ethernet: mtk-star-emac: simplify interrupt handling mld: fix memory leak in ipv6_mc_destroy_dev() bnxt_en: Return from timer if interface is not in open state. bnxt_en: Fix AER reset logic on 57500 chips. ...
2020-06-16Merge tag 'flex-array-conversions-5.8-rc2' of ↵Linus Torvalds30-39/+39
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array member conversions from Gustavo A. R. Silva: "Replace zero-length arrays with flexible-array members. Notice that all of these patches have been baking in linux-next for two development cycles now. There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. C99 introduced “flexible array members”, which lacks a numeric size for the array declaration entirely: struct something { size_t count; struct foo items[]; }; This is the way the kernel expects dynamically sized trailing elements to be declared. It allows the compiler to generate errors when the flexible array does not occur last in the structure, which helps to prevent some kind of undefined behavior[3] bugs from being inadvertently introduced to the codebase. It also allows the compiler to correctly analyze array sizes (via sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For instance, there is no mechanism that warns us that the following application of the sizeof() operator to a zero-length array always results in zero: struct something { size_t count; struct foo items[0]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; size = sizeof(instance->items) * instance->count; memcpy(instance->items, source, size); At the last line of code above, size turns out to be zero, when one might have thought it represents the total size in bytes of the dynamic memory recently allocated for the trailing array items. Here are a couple examples of this issue[4][5]. Instead, flexible array members have incomplete type, and so the sizeof() operator may not be applied[6], so any misuse of such operators will be immediately noticed at build time. The cleanest and least error-prone way to implement this is through the use of a flexible array member: struct something { size_t count; struct foo items[]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; size = sizeof(instance->items[0]) * instance->count; memcpy(instance->items, source, size); instead" [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") [4] commit f2cd32a443da ("rndis_wlan: Remove logically dead code") [5] commit ab91c2a89f86 ("tpm: eventlog: Replace zero-length array with flexible-array member") [6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html * tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits) w1: Replace zero-length array with flexible-array tracing/probe: Replace zero-length array with flexible-array soc: ti: Replace zero-length array with flexible-array tifm: Replace zero-length array with flexible-array dmaengine: tegra-apb: Replace zero-length array with flexible-array stm class: Replace zero-length array with flexible-array Squashfs: Replace zero-length array with flexible-array ASoC: SOF: Replace zero-length array with flexible-array ima: Replace zero-length array with flexible-array sctp: Replace zero-length array with flexible-array phy: samsung: Replace zero-length array with flexible-array RxRPC: Replace zero-length array with flexible-array rapidio: Replace zero-length array with flexible-array media: pwc: Replace zero-length array with flexible-array firmware: pcdp: Replace zero-length array with flexible-array oprofile: Replace zero-length array with flexible-array block: Replace zero-length array with flexible-array tools/testing/nvdimm: Replace zero-length array with flexible-array libata: Replace zero-length array with flexible-array kprobes: Replace zero-length array with flexible-array ...
2020-06-16Merge branch '1GbE' of ↵David S. Miller2-51/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-16 This series contains fixes to e1000 and e1000e. Chen fixes an e1000e issue where systems could be waken via WoL, even though the user has disabled the wakeup bit via sysfs. Vaibhav Gupta updates the e1000 driver to clean up the legacy Power Management hooks. Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP preprocessor tags, which also resolves the compiler warnings about the possibility of unused structure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16e1000e: fix unused-function warningArnd Bergmann1-11/+5
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent, leading to a warning about sometimes unused function: drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function] Rather than adding more #ifdefs, just remove them completely and mark the PM functions as __maybe_unused to let the compiler work it out on it own. Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-16e1000: use generic power managementVaibhav Gupta1-36/+13
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let PCI core handle the work. e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks. __e1000_shutdown() modifies the value of "wake" (device should be wakeup enabled or not), responsible for controlling the flow of legacy PM. Since, PCI core has no idea about the value of "wake", new code for generic PM may produce unexpected results. Thus, use "device_set_wakeup_enable()" to wakeup-enable the device accordingly. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-16e1000e: Do not wake up the system via WOL if device wakeup is disabledChen Yu1-4/+10
Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-16lan743x: add MODULE_DEVICE_TABLE for module loading aliasTim Harvey1-0/+2
Without a MODULE_DEVICE_TABLE the attributes are missing that create an alias for auto-loading the module in userspace via hotplug. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mlxsw: spectrum: Adjust headroom buffers for 8x portsIdo Schimmel4-0/+17
The port's headroom buffers are used to store packets while they traverse the device's pipeline and also to store packets that are egress mirrored. On Spectrum-3, ports with eight lanes use two headroom buffers between which the configured headroom size is split. In order to prevent packet loss, multiply the calculated headroom size by two for 8x ports. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16bareudp: Fixed configuration to avoid having garbage valuesMartin1-0/+2
Code to initialize the conf structure while gathering the configuration of the device was missing. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mvpp2: remove module bugfixSven Auhagen1-2/+5
The remove function does not destroy all BM Pools when per cpu pool is active. When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new. This eventually leads to a kernel crash. v2: * add Fixes tag Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16libceph: move away from global osd_req_flagsIlya Dryomov1-1/+3
osd_req_flags is overly general and doesn't suit its only user (read_from_replica option) well: - applying osd_req_flags in account_request() affects all OSD requests, including linger (i.e. watch and notify). However, linger requests should always go to the primary even though some of them are reads (e.g. notify has side effects but it is a read because it doesn't result in mutation on the OSDs). - calls to class methods that are reads are allowed to go to the replica, but most such calls issued for "rbd map" and/or exclusive lock transitions are requested to be resent to the primary via EAGAIN, doubling the latency. Get rid of global osd_req_flags and set read_from_replica flag only on specific OSD requests instead. Fixes: 8ad44d5e0d1e ("libceph: read_from_replica option") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-06-16s390/zcrypt: use kzallocZou Wei1-2/+1
This patch fixes below warning reported by coccicheck drivers/s390/crypto/zcrypt_ep11misc.c:198:8-15: WARNING: kzalloc should be used for cprb, instead of kmalloc/memset Link: https://lkml.kernel.org/r/1587472548-105240-1-git-send-email-zou_wei@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/virtio: remove unused pm callbacksCornelia Huck1-26/+0
Support for hibernation on s390 has been recently been removed with commit 394216275c7d ("s390: remove broken hibernate / power management support"), no need to keep unused code around. Link: https://lkml.kernel.org/r/20200526093629.257649-1-cohuck@redhat.com Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/qdio: reduce SLSB writes during Input Queue processingJulian Wiedmann3-50/+20
Streamline the processing of QDIO Input Queues, and remove some intermittent SLSB updates (no deleting of old ACKs, no redundant transitions through NOT_INIT). Rather than counting ACKs, we now keep track of the whole batch of SBALs that were completed during the current polling cycle. Most completed SBALs stay in their initial state (ie. PRIMED or ERROR), except that the most recent SBAL in each sub-run is ACKed for IRQ reduction. The only logic changes happen in inbound_handle_work(), the other delta is just a renaming of the variables that track the SBAL batch. Note that in particular we don't need to flip the _oldest_ SBAL to an idle state (eg. NOT_INIT or ACKed) as a guard against catching our own tail. Since get_inbound_buffer_frontier() will never scan more than the remaining nr_buf_used SBALs, this scenario just doesn't occur. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/qdio: fine-tune SLSB updateJulian Wiedmann1-1/+8
xchg() for a single-byte location assembles to a 4-byte Compare&Swap, wrapped into a non-trivial amount of retry code that deals with concurrent modifications to the unaffected bytes. Change it to a simple byte-store, but preserve the memory ordering semantics that the CS provided. This simplifies the generated code for a hot path, and in theory also allows us to amortize the memory barriers over multiple SLSB updates. CC: Andreas Krebbel <krebbel@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16drm/i915/display: Fix the encoder type checkVandita Kulkarni1-3/+3
For all ddi, encoder->type holds output type as ddi, assigning it to individual o/p types is no more valid. Fixes: 362bfb995b78 ("drm/i915/tgl: Add DKL PHY vswing table for HDMI") v2: Rebase, no functional change. Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612082237.11886-1-vandita.kulkarni@intel.com (cherry picked from commit 94641eb6c69682884abbecf22fe5b7c185af6a06) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-16drm/i915/icl+: Fix hotplug interrupt disabling after storm detectionImre Deak1-0/+1
Atm, hotplug interrupts on TypeC ports are left enabled after detecting an interrupt storm, fix this. Reported-by: Kunal Joshi <kunal1.joshi@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/351 Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/1964 Cc: Kunal Joshi <kunal1.joshi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612121731.19596-1-imre.deak@intel.com (cherry picked from commit 587a87b9d7e94927edcdea018565bc1939381eb1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-16drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workaroundsChris Wilson2-20/+22
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-6-chris@chris-wilson.co.uk (cherry picked from commit 2bcefd0d263ab4a72f0d61921ae6b0dc81606551) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-16drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workaroundsChris Wilson2-10/+14
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-5-chris@chris-wilson.co.uk (cherry picked from commit 806a45c0838d253e306a6384057e851b65d11099) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-16drm/i915/gt: Move snb GT workarounds from init_clock_gating to workaroundsChris Wilson2-33/+41
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-4-chris@chris-wilson.co.uk (cherry picked from commit c3b93a943f2c9ee4a106db100a2fc3b2f126bfc5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-16drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workaroundsChris Wilson2-61/+59
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-3-chris@chris-wilson.co.uk (cherry picked from commit 7331c356b6d2d8a01422cacab27478a1dba9fa2a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>