summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller270-1650/+2593
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds54-378/+550
Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ...
2015-12-17team: Advertise tunneling offload featuresEran Ben Elisha1-0/+11
When the underlying device supports offloads encapulated traffic, we need to reflect that through the hw_enc_features field of the team net-device. This will cause the xmit path in the core networking stack to provide team with encapsulated GSO frames to offload into the HW etc. Using this over Mellanox ConnectX3-pro (mlx4 driver) card that supports VXLAN offloads we got 36.0 Gbits/sec using eight iperf streams. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17net: qmi_wwan: ignore bogus CDC Union descriptorsBjørn Mork1-1/+4
The CDC descriptors found on these vendor specific functions should not be considered authoritative. They seem to be ignored by drivers for other systems, and the quality is therefore low. One device (1e0e:9001) has been reported to have such a bogus union descriptor on the QMI function, making it fail probing even if the device id was dynamically added. The report was not complete enough to allow adding a device entry for this modem. But this should at least fix the dynamic id probing problem. Reported-by: Kanerva Topi <Topi.Kanerva@cinia.fi> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17net/macb: Update device tree binding for resetting PHY using GPIOGregory CLEMENT1-3/+12
Instead of being at the MAC level the reset gpio preperty is moved at the PHY child node level. It is still managed by the MAC, but from the point of view of the binding it make more sense to be part of the PHY node. This commit also fixes a build errors if GPIOLIB is not selected. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17cxgb4: Replace arpq_head/arpq_tail with SKB double link-list codeHariprasad Shenai2-40/+24
Based on original work by Michael Werner <werner@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17cxgb4: Use t4_mgmt_tx() API for sending write l2t request ctrl packets.Hariprasad Shenai1-2/+1
Based on original work by Michael Werner <werner@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17cxgb4: Add API to alloc l2t entry; also update existing onesHariprasad Shenai3-25/+117
Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17cxgb4: Use symbolic constant for VLAN priority calculationHariprasad Shenai1-1/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17drivers: net: xgene: fix Tx flow controlIyappan Subramanian2-18/+24
Currently the Tx flow control is based on reading the hardware state, which is not accurate since it may not reflect the descriptors that are not yet reached the memory. To accurately control the Tx flow, changing it to be software based. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17nfp: clear ring delayed kick countersJakub Kicinski1-0/+2
We need to clear delayed kick counters when we free rings otherwise after ndo_close()/ndo_open() we could kick HW by more entries than actually written to rings. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Rolf Neugebauer <rolf.neugebauer@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17tun: honor IFF_UP in tun_get_user()Eric Dumazet1-0/+3
If a tun interface is turned down, we should not allow packet injection into the kernel. Kernel does not send packets to the tun already. TUNATTACHFILTER can not be used as only tun_net_xmit() is taking care of it. Reported-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-11/+8
Pull drm fixes from Dave Airlie: "Some i915 fixes, one omap fix, one core regression fix. Not even enough fixes for a twelve days of xmas song, which seemms good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Don't overwrite UNVERFIED mode status to OK drm/omap: fix fbdev pix format to support all platforms drm/i915: Do a better job at disabling primary plane in the noatomic case. drm/i915/skl: Double RC6 WRL always on drm/i915/skl: Disable coarse power gating up until F0 drm/i915: Remove incorrect warning in context cleanup
2015-12-17Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Two bug fixes for misuse of PAGE_MASK in scatterlist and dma-debug. These are tagged for -stable. The scatterlist impact is potentially corrupted dma addresses on HIGHMEM enabled platforms. - A minor locking fix for the NFIT hot-add implementation that is new in 4.4-rc. This would only trigger in the case a hot-add raced driver removal. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dma-debug: Fix dma_debug_entry offset calculation Revert "scatterlist: use sg_phys()" nfit: acpi_nfit_notify(): Do not leave device locked
2015-12-1682xx: FCC: Fixing a bug causing to FCC port lock-upMartin Roth1-1/+1
The patch fixes FCC port lock-up, which occurs as a result of a bug during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16gianfar: Don't enable RX Filer if not supportedHamish Martin2-3/+6
After commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16i40e: Call geneve_get_rx_port to get the existing Geneve portsSinghai, Anjali1-0/+3
This patch adds a call to geneve_get_rx_port in i40e so that when it comes up it can learn about the existing geneve tunnels. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16geneve: Add geneve_get_rx_port supportSinghai, Anjali1-0/+24
This patch adds an op that the drivers can call into to get existing geneve ports. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16i40e: Kernel dependency update for i40e to support geneve offloadSinghai, Anjali1-0/+10
Update the Kconfig file with dependency for supporting GENEVE tunnel offloads. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16i40e: geneve tunnel offload supportSinghai, Anjali4-43/+150
This patch adds driver hooks to implement ndo_ops to add/del udp port in the HW to identify GENEVE tunnels. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16geneve: Add geneve udp port offload for ethernet devicesSinghai, Anjali1-0/+23
Add ndo_ops to add/del UDP ports to a device that supports geneve offload. v2: Comment fix. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15stmmac: socfpga: Provide dt node to config ptp clk source.Phil Reid1-0/+9
Provides an options to use the ptp clock routed from the Altera FPGA fabric. Instead of the defalt eosc1 clock connected to the ARM HPS core. This setting affects all emacs in the core as the ptp clock is common. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15stmmac: Fix calculations for ptp counters when clock input = 50Mhz.Phil Reid3-15/+15
stmmac_config_sub_second_increment set the sub second increment to 20ns. Driver is configured to use the fine adjustment method where the sub second register is incremented when the acculumator incremented by the addend register wraps overflows. This accumulator is update on every ptp clk cycle. If a ptp clk with a period of greater than 20ns was used the sub second register would not get updated correctly. Instead set the sub sec increment to twice the period of the ptp clk. This result in the addend register being set mid range and overflow the accumlator every 2 clock cycles. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15stmmac: create of compatible mdio bus for stmmac driverPhil Reid2-4/+24
The DSA driver needs to be passed a reference to an mdio bus. Typically the mac is configured to use a fixed link but the mdio bus still needs to be registered so that it con configure the switch. This patch follows the same process as the altera tse ethernet driver for creation of the mdio bus. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUMTom Herbert2-2/+2
These netif flags are unnecessary convolutions. It is more straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM, and NETIF_F_IPV6_CSUM directly. This patch also: - Cleans up can_checksum_protocol - Simplifies netdev_intersect_features Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert18-25/+24
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15fcoe: Use CHECKSUM_PARTIAL to indicate CRC offloadTom Herbert1-1/+1
When setting up CRC offload set ip_summed to CHECKSUM_PARTIAL instead of CHECKSUM_UNNECESSARY. This is consistent with the definition of CHECKSUM_PARTIAL. The only driver that seems to be advertising NETIF_F_FCOE_CRC is ixgbe. AFICT the driver does not look at ip_summed for FCOE and just assumes that CRC is being offloaded. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sctp: Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRCTom Herbert5-7/+7
The SCTP checksum is really a CRC and is very different from the standards 1's complement checksum that serves as the checksum for IP protocols. This offload interface is also very different. Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC to highlight these differences. The term CSUM should be reserved in the stack to refer to the standard 1's complement IP checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15Revert "scatterlist: use sg_phys()"Dan Williams3-5/+5
commit db0fa0cb0157 "scatterlist: use sg_phys()" did replacements of the form: phys_addr_t phys = page_to_phys(sg_page(s)); phys_addr_t phys = sg_phys(s) & PAGE_MASK; However, this breaks platforms where sizeof(phys_addr_t) > sizeof(unsigned long). Revert for 4.3 and 4.4 to make room for a combined helper in 4.5. Cc: <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: db0fa0cb0157 ("scatterlist: use sg_phys()") Suggested-by: Joerg Roedel <joro@8bytes.org> Reported-by: Vitaly Lavrov <vel21ripn@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-15Merge tag 'dmaengine-fix-4.4-rc6' of ↵Linus Torvalds4-50/+105
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This has fixes spread thru driver, notably among them: - edma fixes for recent edma DT changes which went into 4.4 - odd fixes for at_hdmac - minor fixes on bc dma and mic dma" * tag 'dmaengine-fix-4.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix at_xdmac_prep_dma_memcpy() dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type dmaengine: mic_x100: add missing spin_unlock dmaengine: bcm2835-dma: Convert to use DMA pool dmaengine: at_xdmac: fix bad behavior in interleaved mode dmaengine: at_xdmac: fix false condition for memset_sg transfers dmaengine: at_xdmac: fix macro typo
2015-12-15Merge tag 'fbdev-fixes-4.4' of ↵Linus Torvalds2-1/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull two fbdev fixes from Tomi Valkeinen: - OMAP: fix analog tv-out when using omapdrm - fsl: Fix kernel crash when diu_ops is not implemented * tag 'fbdev-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: OMAPDSS: fix timings for VENC to match what omapdrm expects video: fbdev: fsl: Fix kernel crash when diu_ops is not implemented
2015-12-15ser_gigaset: remove unnecessary kfree() calls from release methodTilman Schmidt1-5/+0
device->platform_data and platform_device->resource are never used and remain NULL through their entire life. Drops the kfree() calls for them from the device release method. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: fix deallocation of platform device structureTilman Schmidt1-3/+7
When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Fixes: 2869b23e4b95 ("drivers/isdn/gigaset: new M101 driver (v2)") Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: turn nonsense checks into WARN_ONAlan Cox1-5/+5
These checks do nothing useful to protect the code from races. On the other hand if the old code has been masking a real bug we would like to know about it. The check for tiocmset is kept because it is valid for a tty driver to have a NULL tiocmset method. That in itself is probably a mistake given modern coding practices - but needs fixing in the tty layer. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: fix up NULL checksTilman Schmidt1-3/+3
Commit f34d7a5b7010 ("tty: The big operations rework") changed tty->driver to tty->ops but left NULL checks for tty->driver untouched. Fix. Signed-off-by: Tilman Schmidt <tilman@imap.cc> [pebolle: removed Fixes tag] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15qlcnic: fix a timeout loopDan Carpenter1-1/+2
The problem here is that at the end of the loop we test for if idc->vnic_wait_limit is zero, but since idc->vnic_wait_limit-- is a post-op, it actually ends up set to (u8)-1. I have fixed this by moving the decrement inside the loop. Fixes: 486a5bc77a4a ('qlcnic: Add support for 83xx suspend and resume.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sfc: fix a timeout loopDan Carpenter1-1/+1
We test for if "tries" is zero at the end but "tries--" is a post-op so it will end with "tries" set to -1. I have changed it to a pre-op instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15qlge: fix a timeout loop in ql_change_rx_buffers()Dan Carpenter1-2/+3
The problem here is that after the loop we test for "if (!i) " but because "i--" is a post-op we exit with i set to -1. I have fixed this by changing it to a pre-op instead. I had to change the starting value from 3 to 4 so that we still iterate 3 times. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ravb: Add fixed-link supportKazuya Mizuguchi1-0/+12
This patch adds support of the fixed PHY. This patch is based on commit 87009814cdbb ("ucc_geth: use the new fixed PHY helpers"). Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15amd-xgbe: fix a couple timeout loopsDan Carpenter1-2/+2
At the end of the loop we test "if (!count)" but because "count--" is a post-op then the loop will end with count set to -1. I have fixed this by changing it to --count. Fixes: c5aa9e3b8156 ('amd-xgbe: Initial AMD 10GbE platform driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mISDN: fix a loop countDan Carpenter1-4/+3
There are two issue here. 1) cnt starts as maxloop + 1 so all these loops iterate one more time than intended. 2) At the end of the loop we test for "if (maxloop && !cnt)" but for the first two loops, we end with cnt equal to -1. Changing this to a pre-op means we end with cnt set to 0. Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Add support for VLAN devices on top of LAGIdo Schimmel1-3/+29
When creating a VLAN device on top of LAG, we are basically creating a vPort on top of each of the port netdevs member in the LAG. Therefore, these vPorts should inherit both the LAG status and LAG ID from the underlying port netdevs. In addition, when the VLAN device joins or leaves a bridge each of the underlying vPorts should know about it and act accordingly. This is achieved by propagating the VLAN event down to the lower devices. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Enable FDB records for VLAN devices on top of LAGIdo Schimmel1-7/+14
When adding or removing FDB records of VLAN devices on top of LAG we should set the lag_vid parameter to the VLAN ID of the VLAN device. It is reserved otherwise. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: reg: Add lag_vid field to SFD registerIdo Schimmel2-2/+10
Unicast LAG records in the Switch Filtering Database (SFD) register have a lag_vid field indicating the VLAN ID in case of vFIDs. This field is no longer reserved since we are going to add support for VLAN devices on top of LAG. Add the lag_vid field to be used by VLAN devies on top of LAG. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Add support for VLAN devices bridgingIdo Schimmel3-1/+378
All the member VLAN devices in a bridge need to share the same vFID. To achieve that, expand the vFID struct to include the associated bridge device (or lack of) and allow one to lookup a vFID based on a bridge device. When joining a bridge, lookup the relevant vFID or create one if none exists. Next, make the VLAN device use the vFID. Leaving a bridge can either occur because a user removed the VLAN device from a bridge or because the VLAN device was deleted by the user. In the latter case the bridge's teardown sequence is invoked after the hardware vPort is already gone. Therefore, when unlinking the VLAN device from the real device, check if the associated vPort is bridged and act accordingly. The bridge's notification will be ignored in this case. Note that bridging a VLAN interface with an ordinary port netdev is currently not supported, but not forbidden. This will be addressed in a follow-up patchset. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Handle VLAN devices linking / unlinkingIdo Schimmel1-3/+51
When a VLAN interface is configured on top of a physical port we should associate the VLAN device with the matching vPort. Likewise, when it's removed, we should revert back to the underlying port netdev. While not a must, this is consistent with port netdevs and also provides a more accurate error printing via netdev_err() and friends. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Adjust FDB notifications for VLAN devicesIdo Schimmel2-4/+61
FDB notifications contain the FID and port (or LAG ID) on which the MAC was learned. In the case of the 802.1Q bridge one can easily derive the matching VID - as FID equals VID - and generate the appropriate notification for the software bridge. With VLAN devices this is no longer the case, as these are associated with a vFID. Solve that by converting the FID to a vFID and lookup the matching VLAN device. From that derive the VID and whether learning (and learning sync) should occur. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Adjust switchdev ops for VLAN devicesIdo Schimmel2-4/+98
switchdev ops can now be called for VLAN devices and we need to be prepared for it. Until now they were only called for the port netdev. Use the newly propagated orig_dev passed as part of the switchdev attr/obj and determine whether the original device is a VLAN device. If so, act accordingly, otherwise continue as usual. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Use FID instead of VID when accessing FDBIdo Schimmel2-28/+34
In the Spectrum ASIC - unlike SwitchX-2 - FDB access is done by specifying FID as parameter and not VID. Change the relevant variables and parameters names to reflect that. Note that this was OK up until now, since FID was always equal to VID, but with the introduction of VLAN interfaces this is no longer the case. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mlxsw: spectrum: Add another flood table for vFIDsIdo Schimmel3-27/+16
We previously used only one flood table for packets classified to vFIDs. However, since we are going to add support for bridges between VLAN interfaces (mapped to vFIDs) we need to add one more flood table. That way we can separate the flooding domain of unknown unicast traffic from all the rest and support flood control (as we do with the 802.1Q bridge). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 07:00:53 +0000