summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-11-13Merge branch 'mlx5-next' of ↵Saeed Mahameed9-442/+689
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux 1) New generic devlink param "enable_roce", for downstream devlink reload support 2) Do vport ACL configuration on per vport basis when enabling/disabling a vport. This enables to have vports enabled/disabled outside of eswitch config for future 3) Split the code for legacy vs offloads mode and make it clear 4) Tide up vport locking and workqueue usage 5) Fix metadata enablement for ECPF 6) Make explicit use of VF property to publish IB_DEVICE_VIRTUAL_FUNCTION 7) E-Switch and flow steering core low level support and refactoring for netfilter flowtables offload Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Add new chain for netfilter flow table offloadPaul Blakey2-5/+13
Netfilter tables (nftables) implements a software datapath that comes after tc ingress datapath. The datapath supports offloading such rules via the flow table offload API. This API is currently only used by NFT and it doesn't provide the global priority in regards to tc offload, so we assume offloading such rules must come after tc. It does provide a flow table priority parameter, so we need to provide some supported priority range. For that, split fastpath prio to two, flow table offload and tc offload, with one dedicated priority chain for flow table offload. Next patch will re-use the multi chain API to access this chain by allowing access to this chain by the fdb_sub_namespace. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Refactor creating fast path prio chainsPaul Blakey1-36/+82
Next patch will re-use this to add a new chain but in a different prio. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Accumulate levels for chains prio namespacesPaul Blakey2-2/+10
Tc chains are implemented by creating a chained prio steering type, and inside it there is a namespace for each chain (FDB_TC_MAX_CHAINS). Each of those has a list of priorities. Currently, all namespaces in a prio start at the parent prio level. But since we can jump from chain (namespace) to another chain in the same prio, we need the levels for higher chains to be higher as well. So we created unused prios to account for levels in previous namespaces. Fix that by accumulating the namespaces levels if we are inside a chained type prio, and removing the unused prios. Fixes: 328edb499f99 ('net/mlx5: Split FDB fast path prio to multiple namespaces') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Define fdb tc levels per prioPaul Blakey2-4/+6
Define FDB_TC_LEVELS_PER_PRIO instead of magic number 2. This is the number of levels used by each tc prio table in the fdb. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Rename FDB_* tc related defines to FDB_TC_* definesPaul Blakey4-15/+15
Rename it to prepare for next patch that will add a different type of offload to the FDB. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Simplify fdb chain and prio eswitch definesPaul Blakey1-8/+4
FDB_MAX_CHAIN and FDB_MAX_PRIO were defined differently depending on if CONFIG_MLX5_ESWITCH is enabled to save space on allocations. This is a minor space saving, and there is no real need for it. Simplify things instead, and define them the same in both cases. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13mscc.c: Add support for additional VSC PHYsBryan Whitehead1-6/+188
Add support for the following VSC PHYs VSC8504, VSC8552, VSC8572 VSC8562, VSC8564, VSC8575, VSC8582 Updates for v2: Checked for NULL on input to container_of Changed a large if else series to a switch statement. Added a WARN_ON to make sure lowest nibble of mask is 0 Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: ethernet: stmmac: fix indentation issueColin Ian King1-1/+1
There is a return statement that is indented too deeply, remove the extraneous tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13nfc: pn533: pn533_phy_ops dev_[up, down] return intLars Poeschel3-9/+20
Change dev_up and dev_down functions of struct pn533_phy_ops to return int. This way the pn533 core can report errors in the phy layer to upper layers. The only user of this is currently uart.c and it is changed to report the error of a possibly failing call to serdev_device_open. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1487395 ("Error handling issues") Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13Merge tag 'ieee802154-for-davem-2019-11-13' of ↵David S. Miller1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2019-11-13 An update from ieee802154 for *net-next* I waited until last minute to see if there are more patches coming in. Seems not and we will only have one change for ieee802154 this time. Yue Haibing removed an unused variable in the cc2520 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: sfp: fix spelling mistake "requies" -> "requires"Colin Ian King1-1/+1
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: macb: convert to phylinkAntoine Tenart3-219/+237
This patch converts the MACB Ethernet driver to the Phylink framework. The MAC configuration is moved to the Phylink ops and Phylink helpers are now used in the ethtools functions. This helps to access the flow control and pauseparam logic and this will be helpful in the future for boards using this controller with SFP cages. Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: macb: move the Tx and Rx buffer initialization into a functionAntoine Tenart1-15/+24
This patch moves the Tx and Rx buffer initialization into its own function. This does not modify the behaviour of the driver and will be helpful to convert the driver to phylink. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: axienet: In kconfig remove arch dependency for axi_emacRadhey Shyam Pandey1-3/+1
To enable xilinx axi_emac driver support on zynqmp ultrascale platform (ARCH64) there are two choices, mention ARCH64 as a dependency list and other is to check if this ARCH dependency list is really needed. Later approach seems more reasonable, so remove the obsolete ARCH dependency list for the axi_emac driver. Sanity test done for microblaze, zynq and zynqmp ultrascale platform. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Add RGMII_RXID supportStefan Wahren1-0/+5
This adds the missing support for the PHY mode RGMII_RXID. It's necessary for the Raspberry Pi 4. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Refactor register access in bcmgenet_mii_configStefan Wahren1-22/+20
The register access in bcmgenet_mii_config() is a little bit opaque and not easy to extend. In preparation for the missing RGMII PHY modes move all the phy name assignments into the switch statement and the register access to the end of the function. This make the code easier to read and extend. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Add BCM2711 supportStefan Wahren2-10/+54
The BCM2711 needs a different maximum DMA burst length. If not set accordingly a timeout in the transmit queue happens and no package can be sent. So use the new compatible to derive this value. Until now the GENET HW version was used as the platform identifier. This doesn't work with SoC-specific modifications, so introduce a proper platform data structure. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Fix error handling on IRQ retrievalStefan Wahren1-4/+7
This fixes the error handling for the mandatory IRQs. There is no need for the error message anymore, this is now handled by platform_get_irq. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Avoid touching non-existent interruptStefan Wahren1-1/+1
As platform_get_irq() now prints an error when the interrupt does not exist, we are getting a confusing error message in case the optional WOL IRQ is not defined: bcmgenet fd58000.ethernet: IRQ index 2 not found Fix this by using the platform_get_irq_optional(). Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: dsa: sja1105: Print the reset reasonVladimir Oltean4-7/+27
Sometimes it can be quite opaque even for me why the driver decided to reset the switch. So instead of adding dump_stack() calls each time for debugging, just add a reset reason to sja1105_static_config_reload calls which gets printed to the console. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12vxlan: implement get_link_ksettings ethtool methodMatthias Schiffer1-2/+22
Similar to VLAN and similar drivers, we can forward get_link_ksettings to the lower dev if we have one to get meaningful speed/duplex data. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12Merge branch 'for-upstream' of ↵David S. Miller7-47/+227
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: linux-bluetooth 2019-11-11 Here's one more bluetooth-next pull request for the 5.5 kernel release. - Several fixes for LE advertising - Added PM support to hci_qca driver - Added support for WCN3991 SoC in hci_qca driver - Added DT bindings for BCM43540 module - A few other small cleanups/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12Merge tag 'linux-can-next-for-5.5-20191111' of ↵David S. Miller16-243/+347
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2019-10-07 this is a pull request for net-next/master consisting of 32 patches. The first patch is by Gustavo A. R. Silva and removes unused code in the generic CAN infrastructure. The next three patches target the mcp251x driver. The one by Andy Shevchenko removes the legacy platform data support from the driver. The other two are by Timo Schlüßler and reset the device only when needed, to prevent glitches on the output when GPIO support is added. I'm contributing two patches fixing checkpatch warnings in the c_can_platform and peak_canfd driver. Stephane Grosjean's patch for the peak_canfd driver adds hw timestamps support in rx skbs. The next three patches target the xilinx_can driver. One patch by me to fix checkpatch warnings, one patch by Anssi Hannula to avoid non requested bus error frames, and a patch by YueHaibing that switches the driver to devm_platform_ioremap_resource(). Pankaj Sharma contributes two patches for the m_can driver, the first one adds support for one shot mode, the other support for handling arbitration errors. Followed by four patches by YueHaibing, switching the grcan, ifi, rcar, and sun4i drivers to devm_platform_ioremap_resource() I'm contributing cleanup patches for the rx-offload helper, while Joakim Zhang's patch prepares the rx-offload helper for CAN-FD support. The rx offload users flexcan and ti_hecc are converted accordingly. The remaining twelve patches target the flexcan driver. First Joakim Zhang switches the driver to devm_platform_ioremap_resource(). The remaining eleven patch are by me and clean up the abstract the access of the iflag1 and iflag2 register both for RX and TX mailboxes. This is a preparation for the upcoming CAN-FD support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12sfc: trace_xdp_exception on XDP failureArthur Fabre1-0/+3
The sfc driver can drop packets processed with XDP, notably when running out of buffer space on XDP_TX, or returning an unknown XDP action. This increments the rx_xdp_bad_drops ethtool counter. Call trace_xdp_exception everywhere rx_xdp_bad_drops is incremented, except for fragmented RX packets as the XDP program hasn't run yet. This allows it to easily be monitored from userspace. This mirrors the behavior of other drivers. Signed-off-by: Arthur Fabre <afabre@cloudflare.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12ptp: ptp_clockmatrix: Fix build errorYueHaibing1-1/+1
When do randbuilding, we got this warning: WARNING: unmet direct dependencies detected for PTP_1588_CLOCK Depends on [n]: NET [=y] && POSIX_TIMERS [=n] Selected by [y]: - PTP_1588_CLOCK_IDTCM [=y] Make PTP_1588_CLOCK_IDTCM depends on PTP_1588_CLOCK to fix this. Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: dsa: mv88e6xxx: fix broken if statement because of a stray semicolonColin Ian King1-1/+1
There is a stray semicolon in an if statement that will cause a dev_err message to be printed unconditionally. Fix this by removing the stray semicolon. Addresses-Coverity: ("Stay semicolon") Fixes: f0942e00a1ab ("net: dsa: mv88e6xxx: Add support for port mirroring") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12netdevsim: Update dummy reporter's devlink binary interfaceAya Levin1-7/+1
Update dummy reporter's output to use updated devlink interface of binary fmsg pair. Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net/mlx5: Dump of fw_fatal use updated devlink binary interfaceAya Levin1-17/+1
Remove redundant code from fw_fatal reporter's dump callback. Use updated devlink interface of binary fmsg pair which breaks the output into chunks internally. Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12cxgb4: make function 'cxgb4_mqprio_free_hw_resources' staticzhengbin1-1/+1
Fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c:242:6: warning: symbol 'cxgb4_mqprio_free_hw_resources' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: atlantic: make function 'aq_ethtool_get_priv_flags', ↵zhengbin1-2/+2
'aq_ethtool_set_priv_flags' static Fix sparse warnings: drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c:706:5: warning: symbol 'aq_ethtool_get_priv_flags' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c:713:5: warning: symbol 'aq_ethtool_set_priv_flags' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: atlantic: make symbol 'aq_pm_ops' staticzhengbin1-1/+1
Fix sparse warnings: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:426:25: warning: symbol 'aq_pm_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 8aaa112a57c1 ("net: atlantic: refactoring pm logic") Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: spectrum: Enable EMAD string TLVShalom Toledo1-0/+2
Make sure to enable EMAD string TLV only after using the required firmware version. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Add support for using EMAD string TLVShalom Toledo2-6/+72
In case the firmware had an error while processing EMADs, it can send back an ASCII string with the reason using EMAD string TLV. This patch adds the support for using EMAD string TLV. In case of an error, reports the reason using devlink hwerr tracepoint. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Extend EMAD information reported to devlink hwerrShalom Toledo1-2/+10
Extend EMAD information reported to devlink hwerr tracepoint with transaction id and reg id (both, hex and string). Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Add support for EMAD string TLV parsingShalom Toledo1-0/+15
During parsing of incoming EMADs, fill the string TLV's offset when it is used. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Add EMAD string TLVShalom Toledo2-1/+24
Add EMAD string TLV, an ASCII string the driver can receive from the firmware in case of an error. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: emad: Remove deprecated EMAD TLVsShalom Toledo1-4/+1
Remove deprecated EMAD TLVs. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Parse TLVs' offsets of incoming EMADsShalom Toledo1-11/+42
Until now the code assumes a fixed structure which makes it difficult to support EMADs with and without new TLVs. Make it more generic by parsing the TLVs when the EMADs are received and store the offset to the different TLVs in the control block. Using these offsets to extract information from the EMADs without relying on a specific structure. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: ethernet: ti: Add dependency for TI_DAVINCI_EMACMao Wenan1-0/+1
If TI_DAVINCI_EMAC=y and GENERIC_ALLOCATOR is not set, below erros can be seen: drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.14': davinci_cpdma.c:(.text+0x359): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x365): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x373): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x37f): undefined reference to `gen_pool_size' drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free': davinci_cpdma.c:(.text+0x4a2): undefined reference to `gen_pool_free_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit_si': davinci_cpdma.c:(.text+0x66c): undefined reference to `gen_pool_alloc_algo_owner' davinci_cpdma.c:(.text+0x805): undefined reference to `gen_pool_free_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create': davinci_cpdma.c:(.text+0xabd): undefined reference to `devm_gen_pool_create' davinci_cpdma.c:(.text+0xb79): undefined reference to `gen_pool_add_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc': davinci_cpdma.c:(.text+0x16c6): undefined reference to `gen_pool_avail' This patch mades TI_DAVINCI_EMAC select GENERIC_ALLOCATOR. Fixes: 99f629718272 ("net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Implement UDP Segmentation OffloadJose Abreu1-9/+23
Implement the UDP Segmentation Offload feature in stmmac. This is only available in GMAC4+ cores. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Rework stmmac_rx()Jose Abreu1-52/+94
This looks over-engineered. Let's use some helpers to get the buffer length and hereby simplify the stmmac_rx() function. No performance drop was seen with the new implementation. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: tc: Remove the speed dependencyJose Abreu1-2/+0
XGMAC3 supports full CBS features with speeds that can go up to 10G so we can now remove the maximum speed check of CBS. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: xgmac: Add C45 PHY support in the MDIO callbacksJose Abreu1-10/+48
Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was tested using Synopsys DesignWare XPCS. v2: - Pull out the readl_poll_timeout() calls into common code (Andrew) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: gmac4+: Add Split Header supportJose Abreu5-3/+46
GMAC4+ cores also support the Split Header feature. Add the support for Split Header feature in the RX path following the same implementation logic that XGMAC followed. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Fix sparse warningJose Abreu4-5/+6
The VID is converted to le16 so the variable must be __le16 type. Reported-by: kbuild test robot <lkp@intel.com> Fixes: c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11cxgb4: remove redundant assignment to hdr_lenColin Ian King1-1/+0
Variable hdr_len is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11mlxsw: core: Enable devlink reload only on probeJiri Pirko1-2/+3
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by: Shalom Toledo <shalomt@mellanox.com> Fixes: a0c76345e3d3 ("devlink: disallow reload operation during device cleanup") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11r8169: add support for RTL8117Heiner Kallweit1-15/+120
Add support for chip version RTL8117. Settings have been copied from Realtek's r8168 driver, there however chip ID 54a belongs to a chip version called RTL8168FP. It was confirmed that RTL8117 works with Realtek's driver, so both chip versions seem to be the same or at least compatible. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: allow modules with slow diagnostics to probeRussell King1-22/+74
When a module is inserted, we attempt to read read the ID from address 0x50. Once we are able to read the ID, we immediately attempt to initialise the hwmon support by reading from address 0x51. If this fails, then we fall into error state, and assume that the module is not usable. Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for I2C address 0x50, which responds immediately. However, address 0x51 is an emulated, which only becomes available once the on-board firmware has booted. This prompts us to fall into the error state. Since the module may be usable without diagnostics, arrange for the hwmon probe independent of the rest of the SFP itself, retrying every 5s for up to about 60s for the monitoring to become available, and print an error message if it doesn't become available. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 05:44:30 +0000