summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-11-20lightnvm: wrong return value and redundant freeWenwei Tao1-4/+2
The return value should be non-zero under error conditions. Remove nvme_free(dev) to avoid free dev more than once. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20i2c: i801: add Intel Lewisburg device IDsAlexandra Yates2-0/+7
Adding Intel codename Lewisburg platform device IDs for SMBus. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-20i2c: fix wakeup irq parsingGrygorii Strashko1-1/+1
This patch fixes obvious copy-past error in wake up irq parsing code which leads to the fact that dev_pm_set_wake_irq() will be called with wrong IRQ number when "wakeup" IRQ is not defined in DT. Fixes: 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: <stable@vger.kernel.org> # v4.3
2015-11-20i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer()Lars-Peter Clausen1-2/+1
Prior to commit e6c9a037bc8a ("i2c: xiic: Remove the disabling of interrupts") IRQs where disabled when the initial __xiic_start_xfer() was called. After the commit the interrupt is enabled while the function is running, this means it is possible for the interrupt to be triggered while the function is still running. When this happens the internal data structures get corrupted and undefined behavior can occur like the following crash: Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 2040 Comm: i2cdetect Not tainted 4.0.0-02856-g047a308 #10956 Hardware name: Xilinx Zynq Platform task: ee0c9500 ti: e99a2000 task.ti: e99a2000 PC is at __xiic_start_xfer+0x6c4/0x7c8 LR is at __xiic_start_xfer+0x690/0x7c8 pc : [<c02bbffc>] lr : [<c02bbfc8>] psr: 800f0013 sp : e99a3da8 ip : 00000000 fp : 00000000 r10: 00000001 r9 : 600f0013 r8 : f0180000 r7 : f0180000 r6 : c064e444 r5 : 00000017 r4 : ee031010 r3 : 00000000 r2 : 00000000 r1 : 600f0013 r0 : 0000000f Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 18c5387d Table: 29a5404a DAC: 00000015 Process i2cdetect (pid: 2040, stack limit = 0xe99a2210) Stack: (0xe99a3da8 to 0xe99a4000) 3da0: ee031010 00000000 00000001 ee031020 ee031224 c02bc5ec 3dc0: ee34c604 00000000 ee0c9500 e99a3dcc e99a3dd0 e99a3dd0 e99a3dd8 c069f0e8 3de0: 00000000 ee031020 c064e100 ffff90bb e99a3e48 c02b6590 ee031020 00000001 3e00: e99a3e48 ee031020 00000000 e99a3e63 00000001 c02b6ec4 00000000 00000000 3e20: 00000000 c02b7320 e99a3ef0 00000000 00000000 e99e3df0 00000000 00000000 3e40: 00000103 2814575f 0000003e c00a0000 e99a3e85 0001003e ee0c0000 e99a3e63 3e60: eefd3578 c064e61c ee0c9500 c0041e04 0000056c e9a56db8 00006e5a b6f5c000 3e80: ee0c9548 eefd0040 00000001 eefd3540 ee0c9500 eefd39a0 c064b540 ee0c9500 3ea0: 00000000 ee92b000 00000000 bef4862c ee34c600 e99ecdc0 00000720 00000003 3ec0: e99a2000 00000000 00000000 c02b8b30 00000000 00000000 00000000 e99a3f24 3ee0: b6e80000 00000000 00000000 c04257e8 00000000 e99a3f24 c02b8f08 00000703 3f00: 00000003 c02116bc ee935300 00000000 bef4862c ee34c600 e99ecdc0 c02b91f0 3f20: e99ecdc0 00000720 bef4862c eeb725f8 e99ecdc0 c00c9e2c 00000003 00000003 3f40: ee248dc0 00000000 ee248dc8 00000002 eeb7c1a8 00000000 00000000 c00bb360 3f60: 00000000 00000000 00000003 ee248dc0 bef4862c e99ecdc0 e99ecdc0 00000720 3f80: 00000003 e99a2000 00000000 c00c9f68 00000000 00000000 b6f22000 00000036 3fa0: c000dfa4 c000de20 00000000 00000000 00000003 00000720 bef4862c bef4862c 3fc0: 00000000 00000000 b6f22000 00000036 00000000 00000000 b6f60000 00000000 3fe0: 00013040 bef48614 00008cab b6ecdbe6 400f0030 00000003 2f7fd821 2f7fdc21 [<c02bbffc>] (__xiic_start_xfer) from [<c02bc5ec>] (xiic_xfer+0x94/0x168) [<c02bc5ec>] (xiic_xfer) from [<c02b6590>] (__i2c_transfer+0x4c/0x7c) [<c02b6590>] (__i2c_transfer) from [<c02b6ec4>] (i2c_transfer+0x9c/0xc4) [<c02b6ec4>] (i2c_transfer) from [<c02b7320>] (i2c_smbus_xfer+0x3a0/0x4ec) [<c02b7320>] (i2c_smbus_xfer) from [<c02b8b30>] (i2cdev_ioctl_smbus+0xb0/0x214) [<c02b8b30>] (i2cdev_ioctl_smbus) from [<c02b91f0>] (i2cdev_ioctl+0xa0/0x1d4) [<c02b91f0>] (i2cdev_ioctl) from [<c00c9e2c>] (do_vfs_ioctl+0x4b0/0x5b8) [<c00c9e2c>] (do_vfs_ioctl) from [<c00c9f68>] (SyS_ioctl+0x34/0x5c) [<c00c9f68>] (SyS_ioctl) from [<c000de20>] (ret_fast_syscall+0x0/0x34) Code: e283300c e5843210 eafffe64 e5943210 (e1d320b4) The issue can easily be reproduced by performing I2C access under high system load or IO load. To fix the issue protect the invocation to __xiic_start_xfer() form xiic_start_xfer() with the same lock that is used to protect the interrupt handler. Fixes: e6c9a037bc8a ("i2c: xiic: Remove the disabling of interrupts") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-20i2c: Revert "i2c: xiic: Do not reset controller before every transfer"Lars-Peter Clausen1-0/+3
Commit d701667bb331 ("i2c: xiic: Do not reset controller before every transfer") removed the reinitialization of the controller before the start of each transfer. Apparently this change is not safe to make and the commit results in random I2C bus failures. An easy way to trigger the issue is to run i2cdetect. Without the patch applied: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- UU UU -- UU 3c -- -- UU 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- With the patch applied every other or so invocation: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30: -- -- -- -- -- -- -- -- UU UU -- UU 3c -- -- UU 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- So revert the commit for now. Fixes: d701667bb331 ("i2c: xiic: Do not reset controller before every transfer") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-20i2c: imx: fix a compiling errorHou Zhiqiang1-0/+1
drivers/i2c/busses/i2c-imx.c:978:2: error: implicit declaration of function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration] pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio); ^ Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-19Merge tag 'dmaengine-fix-4.4-rc2' of ↵Linus Torvalds6-29/+34
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This has odd fixes spreadout drivers, not major here - usbdmac fixes for pm - edma build and logic fixes - build warn fixes for few drivers" * tag 'dmaengine-fix-4.4-rc2' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_hdmac: use %pad format string for dma_addr_t dmaengine: at_xdmac: use %pad format string for dma_addr_t dmaengine: imx-sdma: remove __init annotation on sdma_event_remap dmaengine: edma: predecence bug in GET_NUM_QDMACH() dmaengine: edma: fix build without CONFIG_OF dmaengine: of_dma: Correct return code for of_dma_request_slave_channel in case !CONFIG_OF dmaengine: sh: usb-dmac: Fix pm_runtime_{enable,disable}() imbalance dmaengine: sh: usb-dmac: Fix crash on runtime suspend
2015-11-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds39-537/+951
Pull drm fixes from Dave Airlie: "A varied bunch of fixes, the radeon pull is probably a bit larger than I'd like, but it contains 2 weeks of stuff, and the Fiji fixes are a bit large, but they are Fiji specific. Otherwise: - mgag200: One cursor regression oops fix. - vc4: A few small fixes and cleanups. - core: Atomic fixes and Atomic helper fixes - i915: Revert for the backlight regression along with a bunch of fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (58 commits) drm/atomic-helper: Check encoder/crtc constraints Revert "drm/i915: skip modeset if compatible for everyone." drm/mgag200: fix kernel hang in cursor code. drm/amdgpu: reserve/unreserve objects out of map/unmap operations drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_bo drm/amdgpu: add lock for interval tree in vm drm/amdgpu: keep the owner for VMIDs drm/amdgpu: move VM manager clean into the VM code again drm/amdgpu: cleanup VM coding style drm/amdgpu: remove unused VM manager field drm/amdgpu: cleanup scheduler command submission drm/amdgpu: fix typo in firmware name drm/i915: Consider SPLL as another shared pll, v2. drm/i915: Fix gpu frequency change tracing drm/vc4: Make sure that planes aren't scaled. drm/vc4: Fix some failure to track __iomem decorations on pointers. drm/vc4: checking for NULL instead of IS_ERR drm/vc4: fix itnull.cocci warnings drm/vc4: fix platform_no_drv_owner.cocci warnings drm/vc4: vc4_plane_duplicate_state() can be static ...
2015-11-19Merge tag 'for-linus-4.4' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds2-31/+59
Pull IPMI updates from Corey Minyard: "Some fixes for small IPMI problems. The most significant is that the driver wasn't starting the timer for some messages, which would result in problems if that message failed for some reason. The others are small optimizations or making things a little neater" * tag 'for-linus-4.4' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi watchdog : add panic_wdt_timeout parameter char: ipmi: Move MODULE_DEVICE_TABLE() to follow struct ipmi: Stop the timer immediately if idle ipmi: Start the timer and thread on internal msgs
2015-11-19Merge tag 'renesas-sh-drivers-for-v4.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver fixlet from Simon Horman: "I am sending this change after v4.4-rc1 has been released as it depends on SoC changes which are present in that rc: = Remove now unnecessary reference to CONFIG_ARCH_SHMOBILE_MULTI" * tag 'renesas-sh-drivers-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI
2015-11-19usblp: do not set TASK_INTERRUPTIBLE before lockJiri Slaby1-1/+1
It is not permitted to set task state before lock. usblp_wwait sets the state to TASK_INTERRUPTIBLE and calls mutex_lock_interruptible. Upon return from that function, the state will be TASK_RUNNING again. This is clearly a bug and a warning is generated with LOCKDEP too: WARNING: CPU: 1 PID: 5109 at kernel/sched/core.c:7404 __might_sleep+0x7d/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa0c588d0>] usblp_wwait+0xa0/0x310 [usblp] Modules linked in: ... CPU: 1 PID: 5109 Comm: captmon Tainted: G W 4.2.5-0.gef2823b-default #1 Hardware name: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012 ffffffff81a4edce ffff880236ec7ba8 ffffffff81716651 0000000000000000 ffff880236ec7bf8 ffff880236ec7be8 ffffffff8106e146 0000000000000282 ffffffff81a50119 000000000000028b 0000000000000000 ffff8802dab7c508 Call Trace: ... [<ffffffff8106e1c6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8109a8bd>] __might_sleep+0x7d/0x90 [<ffffffff8171b20f>] mutex_lock_interruptible_nested+0x2f/0x4b0 [<ffffffffa0c588fc>] usblp_wwait+0xcc/0x310 [usblp] [<ffffffffa0c58bb2>] usblp_write+0x72/0x350 [usblp] [<ffffffff8121ed98>] __vfs_write+0x28/0xf0 ... Commit 7f477358e2384c54b190cc3b6ce28277050a041b (usblp: Implement the ENOSPC convention) moved the set prior locking. So move it back after the lock. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: 7f477358e2 ("usblp: Implement the ENOSPC convention") Acked-By: Pete Zaitcev <zaitcev@yahoo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-19usb: kconfig: fix warning of select USB_OTGPeter Chen2-5/+2
When choose randconfig for kernel build, it reports below warning: "warning: (USB_OTG_FSM && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && PM)" In fact, USB_OTG is visible symbol and depends on PM, so the driver needs to depend on it to reduce dependency problem. Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-19USB: option: add XS Stick W100-2 from 4G SystemsBjørn Mork1-0/+9
Thomas reports " 4gsystems sells two total different LTE-surfsticks under the same name. .. The newer version of XS Stick W100 is from "omega" .. Under windows the driver switches to the same ID, and uses MI03\6 for network and MI01\6 for modem. .. echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b01 Rev=02.32 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Now all important things are there: wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at) There is also ttyUSB0, but it is not usable, at least not for at. The device works well with qmi and ModemManager-NetworkManager. " Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20Merge branches 'acpi-smbus', 'acpi-ec' and 'acpi-pci'Rafael J. Wysocki3-44/+10
* acpi-smbus: Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook" ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code * acpi-ec: ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query() * acpi-pci: PCI: Fix OF logic in pci_dma_configure()
2015-11-20Merge branch 'pm-sleep'Rafael J. Wysocki1-0/+6
* pm-sleep: PM / wakeirq: check that wake IRQ is valid before accepting it
2015-11-20Merge branches 'pm-cpufreq' and 'acpi-cppc'Rafael J. Wysocki4-246/+74
* pm-cpufreq: Revert "Documentation: kernel_parameters for Intel P state driver" cpufreq: mediatek: fix build error cpufreq: intel_pstate: Add separate support for Airmont cores cpufreq: intel_pstate: Replace BYT with ATOM Revert "cpufreq: intel_pstate: Use ACPI perf configuration" Revert "cpufreq: intel_pstate: Avoid calculation for max/min" * acpi-cppc: ACPI / CPPC: Use h/w reduced version of the PCCT structure
2015-11-20PCI: Fix OF logic in pci_dma_configure()Suravee Suthikulpanit1-2/+2
This patch fixes a bug introduced by previous commit, which incorrectly checkes the of_node of the end-point device. Instead, it should check the of_node of the host bridge. Fixes: 50230713b639 ("PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()") Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-20Merge tag 'drm-intel-fixes-2015-11-19' of ↵Dave Airlie7-52/+118
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes for 4.4, including the revert for the backlight regression Olof reported. Otherwise fixes all around. * tag 'drm-intel-fixes-2015-11-19' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: skip modeset if compatible for everyone." drm/i915: Consider SPLL as another shared pll, v2. drm/i915: Fix gpu frequency change tracing drm/i915: Don't clobber the addfb2 ioctl params drm/i915: Clear intel_crtc->atomic before updating it. drm/i915: get runtime PM reference around GEM set_caching IOCTL drm/i915: Fix GT frequency rounding drm/i915: quirk backlight present on Macbook 4, 1 drm/i915: Fix crtc_y assignment in intel_find_initial_plane_obj()
2015-11-20Merge tag 'topic/drm-fixes-2015-11-19' of ↵Dave Airlie3-65/+76
git://anongit.freedesktop.org/drm-intel into drm-fixes Here are some drm core fixes for v4.4 that I've picked up. Atomic fixes from Maarten, and atomic helper fixes from Ville and Daniel. Admittedly the topmost commit didn't sit in our tree for very long, but does come with reviews and testing from trustworthy people. * tag 'topic/drm-fixes-2015-11-19' of git://anongit.freedesktop.org/drm-intel: drm/atomic-helper: Check encoder/crtc constraints drm: Fix primary plane size for stereo doubled modes for legacy setcrtc drm/core: Fix old_fb handling in pan_display_atomic. drm/core: Fix old_fb handling in restore_fbdev_mode_atomic. drm/atomic: add a drm_atomic_clean_old_fb helper. drm/core: Fix old_fb handling in drm_mode_atomic_ioctl. drm/core: Set legacy_cursor_update in drm_atomic_helper_disable_plane.
2015-11-19null_blk: do not del gendisk with lightnvmMatias Bjørling1-3/+5
The gendisk structure has not been initialized when using lightnvm. Make sure to not delete it upon exit. Also make sure that we use the appropriate disk_name at unregistration. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-19null_blk: use device addressing modeMatias Bjørling1-5/+23
The linear addressing mode was removed in 7386af2. Make null_blk instead expose the ppa format geometry and support the generic addressing mode. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-19null_blk: use ppa_cache poolMatias Bjørling1-2/+23
Instead of using a page pool, we can save memory by only allocating room for 64 entries for the ppa command. Introduce a ppa_cache to allocate only the required memory for the ppa list. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-19Merge tag 'usb-serial-4.4-rc2' of ↵Greg Kroah-Hartman4-20/+82
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.4-rc2 Here are some new device ids, support for an odd qcserial Gobi interface layout and a fix for the qcserial Huawei interface layout. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-19Merge branch 'for-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "Two functional fixes for wacom HID driver from Ping Cheng and Jiri Kosina" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: fixup quirks setup for WACOM_DEVICETYPE_PAD HID: wacom: Add outbounding area for DTU1141
2015-11-19NVMe: Fix possible arithmetic overflow for max segmentsKeith Busch1-1/+1
Reported-by: Paul Grabinar <paul.grabinar@ranbarg.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-19Merge tag 'mmc-v4.4-rc1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds5-34/+75
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.4 rc2. It's based on a commit prior rc1 as I wanted to get them a bit more tested in next before sending you the pull request. MMC core: - Improve reliability when selecting HS200 mode - Improve reliability when selecting HS400 mode - mmc: remove bondage between REQ_META and reliable write MMC host: - pxamci: Fix read-only gpio detection polarity - mtk-sd: Preinitialize delay_phase to fix the case when delay is zero - android-goldfish: Fix build dependency by adding HAS_DMA - dw_mmc: Remove Seungwon Jeon from MAINTAINERS" * tag 'mmc-v4.4-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: remove bondage between REQ_META and reliable write mmc: MMC_GOLDFISH should depend on HAS_DMA mmc: mediatek: Preinitialize delay_phase in get_best_delay() MAINTAINERS: mmc: Remove Seungwon Jeon from dw_mmc mmc: mmc: Improve reliability of mmc_select_hs400() mmc: mmc: Move mmc_switch_status() mmc: mmc: Fix HS setting in mmc_select_hs400() mmc: mmc: Improve reliability of mmc_select_hs200() mmc: pxamci: fix read-only gpio detection polarity
2015-11-19dm crypt: fix a possible hang due to race condition on exitMikulas Patocka1-9/+13
A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). It is possible that the processor reorders memory accesses so that kthread_should_stop() is executed before __set_current_state(). If such reordering happens, there is a possible race on thread termination: CPU 0: calls kthread_should_stop() it tests KTHREAD_SHOULD_STOP bit, returns false CPU 1: calls kthread_stop(cc->write_thread) sets the KTHREAD_SHOULD_STOP bit calls wake_up_process on the kernel thread, that sets the thread state to TASK_RUNNING CPU 0: sets __set_current_state(TASK_INTERRUPTIBLE) spin_unlock_irq(&cc->write_thread_wait.lock) schedule() - and the process is stuck and never terminates, because the state is TASK_INTERRUPTIBLE and wake_up_process on CPU 1 already terminated Fix this race condition by using a new flag DM_CRYPT_EXIT_THREAD to signal that the kernel thread should exit. The flag is set and tested while holding cc->write_thread_wait.lock, so there is no possibility of racy access to the flag. Also, remove the unnecessary set_task_state(current, TASK_RUNNING) following the schedule() call. When the process was woken up, its state was already set to TASK_RUNNING. Other kernel code also doesn't set the state to TASK_RUNNING following schedule() (for example, do_wait_for_common in completion.c doesn't do it). Fixes: dc2676210c42 ("dm crypt: offload writes to thread") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-11-19drm/atomic-helper: Check encoder/crtc constraintsDaniel Vetter1-0/+8
This was totally lost when I originally created the atomic helpers. We probably should also check possible_clones in the helpers, but since the legacy ones didn't do that this is for a separate patch. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Stone <daniels@collabora.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447868808-10266-1-git-send-email-daniel.vetter@ffwll.ch
2015-11-19Revert "drm/i915: skip modeset if compatible for everyone."Jani Nikula3-1/+8
This reverts commit 6764e9f8724f1231b4deac53b9a82286ac0830e7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes: 6764e9f8724f ("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
2015-11-19drm/mgag200: fix kernel hang in cursor code.Wang, Rui Y1-6/+5
The machine hang completely with the following message on the console: [ 487.777538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 487.777554] IP: [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30 [ 487.777557] PGD 42e9f7067 PUD 42f2fa067 PMD 0 [ 487.777560] Oops: 0002 [#1] SMP ... [ 487.777618] CPU: 21 PID: 3190 Comm: Xorg Tainted: G E 4.4.0-rc1-3-default+ #6 [ 487.777620] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRHSXSD1.86B.0059.R00.1501081238 01/08/2015 [ 487.777621] task: ffff880853ae4680 ti: ffff8808696d4000 task.ti: ffff8808696d4000 [ 487.777625] RIP: 0010:[<ffffffff8158aaee>] [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30 [ 487.777627] RSP: 0018:ffff8808696d79c0 EFLAGS: 00010246 [ 487.777628] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 487.777629] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000060 [ 487.777630] RBP: ffff8808696d79e0 R08: 0000000000000000 R09: ffff88086924a780 [ 487.777631] R10: 000000000001bb40 R11: 0000000000003246 R12: 0000000000000000 [ 487.777632] R13: ffff880463a27360 R14: ffff88046ca50218 R15: 0000000000000080 [ 487.777634] FS: 00007f3f81c5a8c0(0000) GS:ffff88086f060000(0000) knlGS:0000000000000000 [ 487.777635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 487.777636] CR2: 0000000000000060 CR3: 000000042e678000 CR4: 00000000001406e0 [ 487.777638] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 487.777639] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 487.777639] Stack: [ 487.777642] ffffffffa00eb5fa ffff8808696d7b60 ffff88086b87d800 0000000000000000 [ 487.777644] ffff8808696d7ac8 ffffffffa01694b6 ffff8808696d7ae8 ffffffff8109c8d5 [ 487.777647] ffff880469158740 ffff880463a27000 ffff88086b87d800 ffff88086b87d800 [ 487.777647] Call Trace: [ 487.777674] [<ffffffffa00eb5fa>] ? drm_gem_object_lookup+0x1a/0xa0 [drm] [ 487.777681] [<ffffffffa01694b6>] mga_crtc_cursor_set+0xc6/0xb60 [mgag200] [ 487.777691] [<ffffffff8109c8d5>] ? find_busiest_group+0x35/0x4a0 [ 487.777696] [<ffffffff81086294>] ? __might_sleep+0x44/0x80 [ 487.777699] [<ffffffff815888c2>] ? __ww_mutex_lock+0x22/0x9c [ 487.777722] [<ffffffffa0104f64>] ? drm_modeset_lock+0x34/0xf0 [drm] [ 487.777733] [<ffffffffa0148d9e>] restore_fbdev_mode+0xee/0x2a0 [drm_kms_helper] [ 487.777742] [<ffffffffa014afce>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [drm_kms_helper] [ 487.777748] [<ffffffffa014b037>] drm_fb_helper_set_par+0x27/0x50 [drm_kms_helper] [ 487.777752] [<ffffffff8134560c>] fb_set_var+0x18c/0x3f0 [ 487.777777] [<ffffffffa02a9b0a>] ? __ext4_handle_dirty_metadata+0x8a/0x210 [ext4] [ 487.777783] [<ffffffff8133cb97>] fbcon_blank+0x1b7/0x2b0 [ 487.777790] [<ffffffff813be2a3>] do_unblank_screen+0xb3/0x1c0 [ 487.777795] [<ffffffff813b5aba>] vt_ioctl+0x118a/0x1210 [ 487.777801] [<ffffffff813a8fe0>] tty_ioctl+0x3f0/0xc90 [ 487.777808] [<ffffffff81172018>] ? kzfree+0x28/0x30 [ 487.777813] [<ffffffff811e053f>] ? mntput+0x1f/0x30 [ 487.777817] [<ffffffff811d3f5d>] do_vfs_ioctl+0x30d/0x570 [ 487.777822] [<ffffffff8107ed3a>] ? task_work_run+0x8a/0xa0 [ 487.777825] [<ffffffff811d4234>] SyS_ioctl+0x74/0x80 [ 487.777829] [<ffffffff8158aeae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 487.777851] Code: 65 ff 0d ce 02 a8 7e 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 e8 b0 01 5d c3 0f 1f 00 65 ff 05 b1 02 a8 7e 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 4e f5 b1 ff 5d [ 487.777854] RIP [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30 [ 487.777855] RSP <ffff8808696d79c0> [ 487.777856] CR2: 0000000000000060 [ 487.777860] ---[ end trace 672a2cd555e0ebd3 ]--- The cursor code may be entered with file_priv == NULL && handle == NULL. The problem was introduced by: "bf89209 drm/mga200g: Hold a proper reference for cursor_set" which calls drm_gem_object_lookup(dev, file_priv...). Previously this wasn't a problem because we checked the handle. Move the check early in the function can fix the problem. Signed-off-by: Rui Wang <rui.y.wang@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-19Merge branch 'drm-vc4-fixes' of git://github.com/anholt/linux into drm-fixesDave Airlie4-13/+23
Here are a few little VC4 fixes for 4.4 that I didn't get in to you before the -next pull request. I dropped the feature-ish one I'd mentioned, and also droppped the one I saw you included in the last -fixes pull request. * 'drm-vc4-fixes' of git://github.com/anholt/linux: drm/vc4: Make sure that planes aren't scaled. drm/vc4: Fix some failure to track __iomem decorations on pointers. drm/vc4: checking for NULL instead of IS_ERR drm/vc4: fix itnull.cocci warnings drm/vc4: fix platform_no_drv_owner.cocci warnings drm/vc4: vc4_plane_duplicate_state() can be static
2015-11-19Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie24-401/+729
into drm-fixes Radeon and amdgpu fixes for 4.4. A bit more the usual since I missed last week. Misc fixes all over the place. The big changes are the tiling configuration fixes for Fiji. * 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amdgpu: reserve/unreserve objects out of map/unmap operations drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_bo drm/amdgpu: add lock for interval tree in vm drm/amdgpu: keep the owner for VMIDs drm/amdgpu: move VM manager clean into the VM code again drm/amdgpu: cleanup VM coding style drm/amdgpu: remove unused VM manager field drm/amdgpu: cleanup scheduler command submission drm/amdgpu: fix typo in firmware name drm/amdgpu: remove the unnecessary parameter adev for amdgpu_sa_bo_new() drm/amdgpu: wait interruptible when semaphores are disabled v2 drm/amdgpu: update pd while updating vm as well drm/amdgpu: fix handling order in scheduler CS drm/amdgpu: fix incorrect mutex usage v3 drm/amdgpu: cleanup scheduler fence get/put dance drm/amdgpu: add command submission workflow tracepoint drm/amdgpu: update Fiji's tiling mode table drm/amdgpu: fix bug that can't enter thermal interrupt for bonaire. drm/amdgpu: fix seq_printf format string drm/radeon: fix quirk for MSI R7 370 Armor 2X ...
2015-11-19cpufreq: mediatek: fix build errorArnd Bergmann1-0/+1
The recently added mt8173 cpufreq driver relies on the cpu topology that is always present on ARM64 but optional on ARM32: drivers/cpufreq/mt8173-cpufreq.c: In function 'mtk_cpufreq_init': drivers/cpufreq/mt8173-cpufreq.c:441:30: error: 'cpu_topology' undeclared (first use in this function) cpumask_copy(policy->cpus, &cpu_topology[policy->cpu].core_sibling); This refines the Kconfig dependencies so that we can still build on ARM32, but only if COMPILE_TEST is selected and the CPU topology code is present. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-19cpufreq: intel_pstate: Add separate support for Airmont coresPhilippe Longepe1-11/+46
There are two flavors of Atom cores to be supported by intel_pstate, Silvermont and Airmont, so make the driver distinguish between them by adding separate frequency tables. Separate the CPU defaults params for each of them and match the CPU IDs against them as appropriate. Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com> Signed-off-by: Stephane Gasparini <stephane.gasparini@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-19cpufreq: intel_pstate: Replace BYT with ATOMPhilippe Longepe1-29/+29
Rename symbol and function names starting with "BYT" or "byt" to start with "ATOM" or "atom", respectively, so as to make it clear that they may apply to Atom in general and not just to Baytrail (the goal is to support several Atoms architectures eventually). This should not lead to any functional changes. Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com> Signed-off-by: Stephane Gasparini <stephane.gasparini@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw : Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-19Revert "cpufreq: intel_pstate: Use ACPI perf configuration"Rafael J. Wysocki2-171/+1
Revert commit 37afb0003242 (cpufreq: intel_pstate: Use ACPI perf configuration) that is reported to cause a regression to happen on a system where invalid data are returned by the ACPI _PSS object. Since that commit makes assumptions regarding the _PSS output correctness that may turn out to be overly optimistic in general, there is a concern that it may introduce regression on more systems, so it's better to revert it now and we'll revisit the underlying issue in the next cycle with a more robust solution. Conflicts: drivers/cpufreq/intel_pstate.c Fixes: 37afb0003242 (cpufreq: intel_pstate: Use ACPI perf configuration) Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-18Revert "cpufreq: intel_pstate: Avoid calculation for max/min"Rafael J. Wysocki1-43/+5
Revert commit 4ef451487019 (cpufreq: intel_pstate: Avoid calculation for max/min) as it depends on commit 37afb0003242 (cpufreq: intel_pstate: Use ACPI perf configuration) that causes problems to happen and needs to be reverted. Conflicts: drivers/cpufreq/intel_pstate.c Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-18Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions"Glen Lee1-23/+25
The source and destination pointers are misplaced. This will be like, ether_addr_copy(data, bssid + ADDR2); -> ether_addr_copy(bssid, data + ADDR2); and also to use ether_addr_copy, it has to be proved that src/dst address are properly aligned(2). I revert this as author agree to drop this patch. This reverts commit d4622f68db8095dd54179e3134e97812727f6b89. Signed-off-by: Glen Lee <glen.lee@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-18Merge tag 'iio-fixes-for-4.4a' of ↵Greg Kroah-Hartman7-41/+90
ssh://ra.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.4 cycle. This set does not include those for issues introduced during the merge window. Fixes of those will follow in a future series. * ad5064 - Make sure the local i2c_write returns 0 on success rather than the number of bytes transfered. Otherwise we report an error on all writes. - Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on these parts. * ad7793 - The product ID on the datasheet is wrong. Fix it in the driver. * IIO_DUMMY_EVGEN - select IRQ_WORK as a dependency. * lpc32xx - make sure clock is prepared before enabling. * si7020 - data byte order was reversed. Fix it. * vf610 - Internal temperature calculation was wrong if a different reference voltage was used. Now use a linear interpolation function to make it work over the full range. - Fix a division by zero in the case of a device tree property not being present (same issue two fixes). * xilinx XADC - VREFN scale was wrong - fix it.
2015-11-18xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devicesMathias Nyman1-6/+9
Clear device initiated resume variables once device is fully up and running in U0 state. Resume needs to be signaled for 20ms for usb2 devices before they can be moved to U0 state. An interrupt is triggered if a device initiates resume. As we handle the event in interrupt context we can not sleep for 20ms, so we instead set a resume flag, a timestamp, and start the roothub polling. The roothub code will later move the port to U0 when it finds a port in resume state with the resume flag set, and timestamp passed by 20ms. A host initiated resume is however not done in interrupt context, and host initiated resume code will directly signal resume, wait 20ms and then move the port to U0. These two codepaths can race, if we are in the middle of a host initated resume, while sleeping for 20ms, we may handle a port event and find the port in resume state. The port event handling code will assume the resume was device initiated and set the resume flag and timestamp. Root hub code will however not catch the port in resume state again as the host initated resume code has already moved the port to U0. The resume flag and timestamp will remain set for this port preventing port from suspending again (LPM setting port to U3) Fix this for now by always clearing the device initated resume parameters once port is in U0 Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-18usb: xhci: fix checking ep busy for CFCLu Baolu1-26/+6
Function ep_ring_is_processing() checks the dequeue pointer in endpoint context to know whether an endpoint is busy with processing TRBs. This is not correct since dequeue pointer field in an endpoint context is only valid when the endpoint is in Halted or Stopped states. This buggy code causes audio noise when playing sound with USB headset connected to host controllers which support CFC (one of xhci 1.1 features). This patch should exist in stable kernel since v4.3. Reported-and-tested-by: YD Tseng <yd_tseng@asmedia.com.tw> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable <stable@vger.kernel.org> # v4.3 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-18xhci: Workaround to get Intel xHCI reset working more reliablyRajmohan Mani1-0/+10
Existing Intel xHCI controllers require a delay of 1 mS, after setting the CMD_RESET bit in command register, before accessing any HC registers. This allows the HC to complete the reset operation and be ready for HC register access. Without this delay, the subsequent HC register access, may result in a system hang, very rarely. Verified CherryView / Braswell platforms go through over 5000 warm reboot cycles (which was not possible without this patch), without any xHCI reset hang. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-18Merge branch 'for-linus' of ↵Linus Torvalds11-35/+87
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Assorted bug fixes, the mlock2 system call gets added, and one improvement. The boot from dasd devices is now possible from a wider range of devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove SALIPL loader s390: wire up mlock2 system call s390: remove g5 elf platform support s390: avoid cache aliasing under z/VM and KVM s390/sclp: _sclp_wait_int(): retain full PSW mask s390/zcrypt: Fix initialisation when zcrypt is built-in s390/zcrypt: Fix kernel crash on systems without AP bus support s390: add support for ipl devices in subchannel sets > 0 s390/ipl: fix out of bounds access in scpdata_write s390/pci_dma: improve debugging of errors during dma map s390/pci_dma: handle dma table failures s390/pci_dma: unify label of invalid translation table entries s390/syscalls: remove system call number calculation s390/cio: simplify css_generate_pgid s390/diag: add a s390 prefix to the diagnose trace point s390/head: fix error message on unsupported hardware
2015-11-18Merge tag 'hwmon-for-linus-v4.4-rc2' of ↵Linus Torvalds3-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix build issues in scpi and ina2xx drivers, update scpi driver to support recent firmware, and fix an uninitialized variable warning in applesmc driver" * tag 'hwmon-for-linus-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (scpi) skip unsupported sensors properly hwmon: (scpi) add thermal-of dependency hwmon : (applesmc) Fix uninitialized variables warnings hwmon: (ina2xx) Fix build issue by selecting REGMAP_I2C
2015-11-18drm/amdgpu: reserve/unreserve objects out of map/unmap operationsChunming Zhou2-25/+25
Change-Id: Id6514f2fb6e002437fdbe99353d5d35f4ac736c7 Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-11-18drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_boChunming Zhou1-15/+18
Change-Id: Ifbb0c06680494bfa04d0be5e5941d31ae2e5ef28 Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-11-18drm/amdgpu: add lock for interval tree in vmChunming Zhou2-2/+15
Change-Id: I62b892a22af37b32e6b4aefca80a25cf45426ed2 Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-11-18drm/amdgpu: keep the owner for VMIDsChristian König2-17/+24
We don't need the last VM use any more, keep the owner directly. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com>
2015-11-18drm/amdgpu: move VM manager clean into the VM code againChristian König4-12/+20
It's not a good idea to duplicate that code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-18drm/amdgpu: cleanup VM coding styleChristian König1-50/+48
Fix the indentation and move the VM functions to the structures. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-19 18:10:45 +0000