summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-04-26mISDN: DSP scheduling fix (version 2)Karsten Keil2-2/+4
dsp_spl_jiffies need to be the same datatype as jiffies (which is ulong). If not, on 64 bit systems it will fallback to schedule the DSP every jiffie tic as soon jiffies become > 2^32. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26mISDN: Fix division by zeroKarsten Keil1-5/+14
If DTMF debug is set and tresh goes under 100, the printk will cause a division by zero. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26mISDN: Fixed hardware bridging/conference check routine of mISDN_dsp.ko.Andreas Eversberg1-5/+10
In some cases the hardware bridging/conference (2-n parties) was selected, but still pure software bridging/conference was used. Signed-off-by: Andreas Eversberg <jolly@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26mISDN: Fix NULL pointer bug in if-condition of mISDN_dspAndreas Eversberg1-1/+1
Fix a bug (was introduced by a cut & paste error) in cases when dsp->conf was NULL. Signed-off-by: Andreas Eversberg <jolly@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller213-1417/+2385
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: Update driver version to 1.72.50-0Barak Witkowski1-2/+2
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: remove gro workaroundDmitry Kravkov4-25/+0
Removes GRO workaround, as issue is fixed in FW 7.2.51. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: add afex supportBarak Witkowski14-57/+1081
Following patch adds afex multifunction support to the driver (afex multifunction is based on vntag header) and updates FW version used to 7.2.51. Support includes the following: 1. Configure vif parameters in firmware (default vlan, vif id, default priority, allowed priorities) according to values received from NIC. 2. Configure FW to strip/add default vlan according to afex vlan mode. 3. Notify link up to OS only after vif is fully initialized. 4. Support vif list set/get requests and configure FW accordingly. 5. Supply afex statistics upon request from NIC. 6. Special handling to L2 interface in case of FCoE vif. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23mlx4_en: Byte Queue Limit supportYevgeny Petrilin3-4/+17
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23mlx4_en: Moving to Interrupts for TX completionsYevgeny Petrilin4-74/+9
Moving to interrupts instead of polling fpr TX completions Avoiding situations where skb can be held in by the driver for a long time (till timer expires). The change is also necessary for supporting BQL. Removing comp_lock that was required because we could handle TX completions from several contexts: Interrupts, timer, polling. Now there is only interrupts Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23mlx4_en: Added Ethtool support for TX Interrupt coalescingYevgeny Petrilin2-4/+21
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23Merge tag 'md-3.4-fixes' of git://neil.brown.name/mdLinus Torvalds2-5/+6
Pull a few more md bug fixes from NeilBrown: "2 are tagged for -stable, one being for a fairly serious bug that can corrupt metadata and make it hard to recovery an array. The other is for a more recent regression since 3.3" * tag 'md-3.4-fixes' of git://neil.brown.name/md: md: fix possible corruption of array metadata on shutdown. md: don't call ->add_disk unless there is good reason. DM RAID: Use safe version of rdev_for_each
2012-04-24md: fix possible corruption of array metadata on shutdown.NeilBrown1-1/+2
commit c744a65c1e2d59acc54333ce8 md: don't set md arrays to readonly on shutdown. removed the possibility of a 'BUG' when data is written to an array that has just been switched to read-only, but also introduced the possibility that the array metadata could be corrupted. If, when md_notify_reboot gets the mddev lock, the array is in a state where it is assembled but hasn't been started (as can happen if the personality module is not available, or in other unusual situations), then incorrect metadata will be written out making it impossible to re-assemble the array. So only call __md_stop_writes() if the array has actually been activated. This patch is needed for any stable kernel which has had the above commit applied. Cc: stable@vger.kernel.org Reported-by: Christoph Nelles <evilazrael@evilazrael.de> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-24md: don't call ->add_disk unless there is good reason.NeilBrown1-2/+2
Commit 7bfec5f35c68121e7b18 md/raid5: If there is a spare and a want_replacement device, start replacement. cause md_check_recovery to call ->add_disk much more often. Instead of only when the array is degraded, it is now called whenever md_check_recovery finds anything useful to do, which includes updating the metadata for clean<->dirty transition. This causes unnecessary work, and causes info messages from ->add_disk to be reported much too often. So refine md_check_recovery to only do any actual recovery checking (including ->add_disk) if MD_RECOVERY_NEEDED is set. This fix is suitable for 3.3.y: Cc: stable@vger.kernel.org Reported-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-24DM RAID: Use safe version of rdev_for_eachJonathan Brassow1-2/+2
Fix segfault caused by using rdev_for_each instead of rdev_for_each_safe Commit dafb20fa34320a472deb7442f25a0c086e0feb33 mistakenly replaced a safe iterator with an unsafe one when making some macro changes. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-23be2net: fix ethtool get settingsAjit Khaparde5-102/+239
ethtool get settings was not displaying all the settings correctly. use the get_phy_info to get more information about the PHY to fix this. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds37-133/+218
Pull networking fixes from David Miller: 1) Fix namespace init and cleanup in phonet to fix some oopses, from Eric W. Biederman. 2) Missing kfree_skb() in AF_KEY, from Julia Lawall. 3) Refcount leak and source address handling fix in l2tp from James Chapman. 4) Memory leak fix in CAIF from Tomasz Gregorek. 5) When routes are cloned from ipv6 addrconf routes, we don't process expirations properly. Fix from Gao Feng. 6) Fix panic on DMA errors in atl1 driver, from Tony Zelenoff. 7) Only enable interrupts in 8139cp driver after we've registered the IRQ handler. From Jason Wang. 8) Fix too many reads of KS_CIDER register in ks8851 during probe, fixing crashes on spurious interrupts. From Matt Renzelmann. 9) Missing include in ath5k driver and missing iounmap on probe failure, from Jonathan Bither. 10) Fix RX packet handling in smsc911x driver, from Will Deacon. 11) Fix ixgbe WoL on fiber by leaving the laser on during shutdown. 12) ks8851 needs MAX_RECV_FRAMES increased otherwise the internal MAC buffers are easily overflown. Fix from Davide Cimingahi. 13) Fix memory leaks in peak_usb CAN driver, from Jesper Juhl. 14) gred packet scheduler can dump in WRED more when doing a netlink dump. Fix from David Ward. 15) Fix MTU in USB smsc75xx driver, from Stephane Fillod. 16) Dummy device needs ->ndo_uninit handler to properly handle ->ndo_init failures. From Hiroaki SHIMODA. 17) Fix TX fragmentation in ath9k driver, from Sujith Manoharan. 18) Missing RTNL lock in ixgbe PM resume, from Benjamin Poirier. 19) Missing iounmap in farsync WAN driver, from Julia Lawall. 20) With LRO/GRO, tcp_grow_window() is easily tricked into not growing the receive window properly, and this hurts performance. Fix from Eric Dumazet. 21) Network namespace init failure can leak net_generic data, fix from Julian Anastasov. 22) Fix skb_over_panic due to mis-accounting in TCP for partially ACK'd SKBs. From Eric Dumazet. 23) New IDs for qmi_wwan driver, from Bjørn Mork. 24) Fix races in ax25_exit(), from Eric W. Biederman. 25) IPV6 TCP doesn't handle TCP_MAXSEG socket option properly, copy over logic from the IPV4 side. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) tcp: fix TCP_MAXSEG for established IPv6 passive sockets drivers/net: Do not free an IRQ if its request failed drop_monitor: allow more events per second ks8851: Fix request_irq/free_irq mismatch net/hyperv: Adding cancellation to ensure rndis filter is closed ks8851: Fix mutex deadlock in ks8851_net_stop() net ax25: Reorder ax25_exit to remove races. icplus: fix interrupt for IC+ 101A/G and 1001LF net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set() ksz884x: don't copy too much in netdev_set_mac_address() tcp: fix retransmit of partially acked frames netns: do not leak net_generic data on failed init net/sock.h: fix sk_peek_off kernel-doc warning tcp: fix tcp_grow_window() for large incoming frames drivers/net/wan/farsync.c: add missing iounmap davinci_mdio: Fix MDIO timeout check ipv6: clean up rt6_clean_expires ipv6: fix rt6_update_expires arcnet: rimi: Fix device name in debug output ...
2012-04-21gianfar: add GRO supportWu Jiajun-B063781-6/+7
Replace netif_receive_skb with napi_gro_receive. Signed-off-by: Jiajun Wu <b06378@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21drivers/net: Do not free an IRQ if its request failedLee Jones1-2/+1
Refrain from attempting to free an interrupt line if the request fails and hence, there is no IRQ to free. CC: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21team: add per-port option for enabling/disabling portsJiri Pirko1-0/+24
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21team: allow to enable/disable portsJiri Pirko3-18/+37
This patch changes content of hashlist (used to get port struct by computed index (0...en_port_count-1)). Now the hash list contains only enabled ports so userspace will be able to say what ports can be used for tx/rx. This becomes handy when userspace will need to disable ports which does not belong to active aggregator. By default, newly added port is enabled. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21team: lb: let userspace care about port macsJiri Pirko1-12/+0
Better to leave this for userspace Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21ks8851: Fix request_irq/free_irq mismatchMatt Renzelmann1-1/+1
The dev_id parameter passed to free_irq needs to match the one passed to the corresponding request_irq. Signed-off-by: Matt Renzelmann <mjr@cs.wisc.edu> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21sock: Introduce named constants for sk_reusePavel Emelyanov3-5/+5
Name them in a "backward compatible" manner, i.e. reuse or not are still 1 and 0 respectively. The reuse value of 2 means that the socket with it will forcibly reuse everyone else's port. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds4-14/+13
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
2012-04-21Merge tag 'mmc-fixes-for-3.4-rc4' of ↵Linus Torvalds9-80/+85
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - Build fix for omap_hsmmc with OF against 3.4-rc1. - Fix CONFIG_MMC_UNSAFE_RESUME semantics regression against 3.3, which broke hotplug card detection when UNSAFE_RESUME is set. - Fix a race condition in omap_hsmmc with runtime PM. - Fix two libertas SDIO-powered-resume regressions. - Small fixes for discard/sanitize, dw_mmc, cd-gpio and esdhc-imx. * tag 'mmc-fixes-for-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Do not pre-claim host in suspend mmc: dw_mmc: prevent NULL dereference for dma_ops mmc: unbreak sdhci-esdhc-imx on i.MX25 mmc: cd-gpio: Include header to pickup exported symbol prototypes mmc: sdhci: refine non-removable card checking for card detection mmc: dw_mmc: Fix switch from DMA to PIO mmc: remove MMC bus legacy suspend/resume method mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m mmc: fixes for eMMC v4.5 sanitize operation mmc: fixes for eMMC v4.5 discard operation
2012-04-21Merge branch 'v4l_for_linus' of ↵Linus Torvalds7-10/+69
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on Kaffeine (Fedora 16 Bugzilla #812895); - Fixes a mutex unlock at an error condition at drx-k; - Fix winbond-cir set mode; - mt9m032: Fix a compilation breakage with some random Kconfig; - mt9m032: fix two dead locks; - xc5000: don't require an special firmware (that won't be provided by the vendor) just because the xtal frequency is different; - V4L DocBook: fix some typos at multi-plane formats description. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware [media] V4L: mt9m032: fix compilation breakage [media] V4L: DocBook: Fix typos in the multi-plane formats description [media] V4L: mt9m032: fix two dead-locks [media] rc-core: set mode for winbond-cir [media] drxk: Does not unlock mutex if sanity check failed in scu_command() [media] dvb_frontend: Fix a regression when switching back to DVB-S
2012-04-21Merge tag 'mfd-for-linus-3.4' of ↵Linus Torvalds8-137/+121
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD fixes from Samuel Ortiz: "We have 3 build fixes, a OMAP USB host PHY reset fix and the twl6040 conversion to an i2c driver. The latter may not sound like a fix but the twl6040 MFD driver won't probe without it, triggering an OMAP4 audio regression." * tag 'mfd-for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix modular builds of rc5t583 regulator support mfd: Fix asic3_gpio_to_irq ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue mfd: Convert twl6040 to i2c driver, and separate it from twl core mfd : Fix dbx500 compilation error
2012-04-21net/hyperv: Adding cancellation to ensure rndis filter is closedWenqi Ma1-24/+14
Although the network interface is down, the RX packets number which could be observed by ifconfig may keep on increasing. This is because the WORK scheduled in netvsc_set_multicast_list() may be executed after netvsc_close(). That means the rndis filter may be re-enabled by do_set_multicast() even if it was closed by netvsc_close(). By canceling possible WORK before close the rndis filter, the issue could be never happened. Signed-off-by: Wenqi Ma <wenqi_ma@trendmicro.com.cn> Reviewed-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21ks8851: Fix mutex deadlock in ks8851_net_stop()Stephen Boyd1-5/+6
There is a potential deadlock scenario when the ks8851 driver is removed. The interrupt handler schedules a workqueue which acquires a mutex that ks8851_net_stop() also acquires before flushing the workqueue. Previously lockdep wouldn't be able to find this problem but now that it has the support we can trigger this lockdep warning by rmmoding the driver after an ifconfig up. Fix the possible deadlock by disabling the interrupts in the chip and then release the lock across the workqueue flushing. The mutex is only there to proect the registers anyway so this should be ok. ======================================================= [ INFO: possible circular locking dependency detected ] 3.0.21-00021-g8b33780-dirty #2911 ------------------------------------------------------- rmmod/125 is trying to acquire lock: ((&ks->irq_work)){+.+...}, at: [<c019e0b8>] flush_work+0x0/0xac but task is already holding lock: (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ks->lock){+.+...}: [<c01b89c8>] __lock_acquire+0x940/0x9f8 [<c01b9058>] lock_acquire+0x10c/0x130 [<c083dbec>] mutex_lock_nested+0x68/0x3dc [<bf00bd48>] ks8851_irq_work+0x24/0x46c [ks8851] [<c019c580>] process_one_work+0x2d8/0x518 [<c019cb98>] worker_thread+0x220/0x3a0 [<c01a2ad4>] kthread+0x88/0x94 [<c0107008>] kernel_thread_exit+0x0/0x8 -> #0 ((&ks->irq_work)){+.+...}: [<c01b7984>] validate_chain+0x914/0x1018 [<c01b89c8>] __lock_acquire+0x940/0x9f8 [<c01b9058>] lock_acquire+0x10c/0x130 [<c019e104>] flush_work+0x4c/0xac [<bf00b858>] ks8851_net_stop+0x6c/0x138 [ks8851] [<c06b209c>] __dev_close_many+0x98/0xcc [<c06b2174>] dev_close_many+0x68/0xd0 [<c06b22ec>] rollback_registered_many+0xcc/0x2b8 [<c06b2554>] rollback_registered+0x28/0x34 [<c06b25b8>] unregister_netdevice_queue+0x58/0x7c [<c06b25f4>] unregister_netdev+0x18/0x20 [<bf00c1f4>] ks8851_remove+0x64/0xb4 [ks8851] [<c049ddf0>] spi_drv_remove+0x18/0x1c [<c0468e98>] __device_release_driver+0x7c/0xbc [<c0468f64>] driver_detach+0x8c/0xb4 [<c0467f00>] bus_remove_driver+0xb8/0xe8 [<c01c1d20>] sys_delete_module+0x1e8/0x27c [<c0105ec0>] ret_fast_syscall+0x0/0x3c other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ks->lock); lock((&ks->irq_work)); lock(&ks->lock); lock((&ks->irq_work)); *** DEADLOCK *** 4 locks held by rmmod/125: #0: (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f44>] driver_detach+0x6c/0xb4 #1: (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f50>] driver_detach+0x78/0xb4 #2: (rtnl_mutex){+.+.+.}, at: [<c06b25e8>] unregister_netdev+0xc/0x20 #3: (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851] Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21drivers/net: decouple ISA and ISA_DMA_APIArnd Bergmann2-6/+6
The two options are separate, and some platforms (e.g. arm pxa) have ISA slots but no ISA dma controller, so they cannot build drivers using the DMA API functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21sungem: use mdelay instead of udelay where necessaryArnd Bergmann1-1/+1
Some architectures like ARM cannot handle large numbers as arguments to udelay, so the drivers should use mdelay when delaying for multiple miliseconds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21donauboe: replace excessive udelay with msleepArnd Bergmann1-1/+1
No driver should spin the CPU for 10ms, so better use an msleep, which is allowed in the ->suspend function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-218390: select CRC32 supportArnd Bergmann1-0/+1
The ax88796 driver uses the CRC32 functions, so make sure that they are actually enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21drivers/net: iwmc3200 depends on EXPERIMENTALArnd Bergmann2-2/+3
The iwmc3200 driver selects other code in Kconfig that depends on EXPERIMENTAL. Kconfig warns about this when CONFIG_EXPERIMENTAL is not already set, so logically, these options should also be marked experimental or promoted to stable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21caif: include linux/io.hArnd Bergmann1-0/+4
The caif_shmcore requires io.h in order to use ioremap, so include that explicitly to compile in all configurations. Also add a note about the use of ioremap(), which is not a proper way to map a DMA buffer into kernel space. It's not completely clear what the intention is for using ioremap, but it is clear that the result of ioremap must not simply be accessed using kernel pointers but should use readl/writel or memcopy_{to,from}io. Assigning the result of ioremap to a regular pointer that can also be set to something else is not ok. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21drivers/net: add missing __devexit_p() annotationsArnd Bergmann3-3/+3
Drivers that refer to a __devexit function in an operations structure need to annotate that pointer with __devexit_p so replace it with a NULL pointer when the section gets discarded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21davinci_cpdma: export symbols used by other driversArnd Bergmann1-1/+12
The davinci_emac driver can be a module, so the symbols it needs from the cpdma driver must be exported. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: remove suspicious commentRichard Cochran1-1/+0
The time stamping code in this driver appears to have been copied from the ixp4xx_eth.c driver, including this timing comment. I had actually measured the time stamp delay on an IXP425, but I really doubt that this value also applies here. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: run the ptp bpf just once per packetRichard Cochran1-3/+1
This patch fixes code which needlessly ran the BPF twice per packet. Instead, we just run the classifier once and test whether the packet is any kind of PTP event message. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: correct receive time stamp filteringTakahiro Shimizu2-4/+20
This patch fixes the driver so that multicast PTP event messages can be recognized by the hardware time stamping unit. The station address register must be set according to the desired transport type. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: do not set the channel control registerTakahiro Shimizu1-2/+0
We will let the pch_gbe code do that according to the receive time stamp filter. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: improve coding styleTakahiro Shimizu1-9/+9
This patch clears up a few coding style issues: - Makes two function definitions a bit nicer looking. - Remove unneeded parentheses. - Simplify macros for register bits. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: export a method to set the receive match addressTakahiro Shimizu2-1/+3
The code in phc_gbe_main will need to call this method in order to set the station address register according to the receive time stamping filter. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: reprogram multicast address register on resetTakahiro Shimizu1-3/+57
The reset logic after a Rx FIFO overrun will clear the programmed multicast addresses. This patch fixes the issue by reprogramming the registers after the reset. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: simplify transmit time stamping flag testTakahiro Shimizu1-3/+3
This patch makes logic surrounding the test of the transmit time stamping flag more readable. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21pch_gbe: scale time stamps to nanosecondsTakahiro Shimizu2-4/+2
This patch fixes the helper functions that give the transmit and receive time stamps to return nanoseconds, instead of arbitrary clock ticks. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21kill mm argument of vm_munmap()Al Viro1-2/+1
it's always current->mm Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-20mmc: core: Do not pre-claim host in suspendUlf Hansson1-35/+20
Since SDIO drivers may want to do some SDIO operations in their suspend callback functions, we must not keep the host claimed when calling them. Daniel Drake reported that libertas_sdio encountered a deadlock in its suspend function. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Tested-by: Daniel Drake <dsd@laptop.org> [stable@: please apply to 3.2-stable and 3.3-stable] Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-20mmc: dw_mmc: prevent NULL dereference for dma_opsJaehoon Chung1-1/+2
Now, dma_ops is assumed that use the IDMAC. But if dma_ops is assigned the pdata->dma_ops, we didn't ensure that callback function is defined. If the callback isn't defined, then we should run in PIO mode. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 21:48:03 +0000