summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-07-14Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in ↵Andrew Duggan1-2/+2
rmi_f11_rel_pos_report The size of relative data in F11 is already defined by RMI_F11_REL_BYTES. Use the define in rmi_f11_rel_pos_report() to be consistent. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove unneeded variableAndrew Duggan1-4/+1
Remove the data_base_addr_offset variable in rmi_f11_attention(). The f11 data is read as a single block so there is no need to store an offset to the data address. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove pointer to rmi_function in f12_dataAndrew Duggan1-1/+0
The pointer to struct rmi_function in f12_data is never set and was never used. The fn pointer is also stored in rmi_2d_sensor which is a member of f12_data. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-13Input: synaptics-rmi4 - support regulator suppliesBjorn Andersson1-0/+46
Support the two supplies - vdd and vio - to make it possible to control power to the Synaptics chip. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-13Input: raydium_i2c_ts - check CRC of incoming packetsJeffrey Lin1-19/+43
Check CRC of incoming touch packets to ensure that we do not operate on corrupted data. Signed-off-by: Jeffrey Lin <jeffrey.lin@rad-ic.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-13Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possibleJan Beulich1-4/+4
... as being the simpler variant. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: add powerkey driver for HISI 65xx SoCJorge Ramirez-Ortiz3-0/+152
This driver provides a input driver for the power button on the HiSi 65xx SoC for boards like HiKey. This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com> then basically rewritten by Jorge, but preserving the original module author credits. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [jstultz: Reworked commit message, folded in other fixes/cleanups from Jorge, implemented some larger cleanups suggested by DmitryT] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: apanel - spelling mistake - "skiping" -> "skipping"Colin Ian King1-1/+1
trivial fix to spelling mistake in pr_notice message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: ams_delta_serio - fix spelling mistake: "paritiy" -> "parity"Colin Ian King1-1/+1
trivial fix to spelling mistake in dev_warn message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: tegra-kbc - fix spelling mistake: "porperly" -> "properly"Colin Ian King1-1/+1
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: regulator-haptic - fix spelling mistake: "dveice" -> "device"Colin Ian King1-1/+1
Trivial fix to spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-18Input: psmouse - use same format for secondary devices as for primaryPali Rohár2-2/+2
This patch changes name of secondary psmouse devices to mach format of primary device. Format of primary device is "protocol vendor name" and is set by function psmouse_switch_protocol() in file psmouse-base.c. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-02Input: add Pegasus Notetaker tablet driverMartin Kepplinger3-0/+437
This adds a driver for the Pegasus Notetaker Pen. When connected, this uses the Pen as an input tablet. This device was sold in various different brandings, for example "Pegasus Mobile Notetaker M210", "Genie e-note The Notetaker", "Staedtler Digital ballpoint pen 990 01", "IRISnotes Express" or "NEWLink Digital Note Taker". Here's an example, so that you know what we are talking about: http://www.genie-online.de/genie-e-note-2/ https://pegatech.blogspot.com/ seems to be a remaining official resource. This device can also transfer saved (offline recorded handwritten) data and there are userspace programs that do this, see https://launchpad.net/m210 (Well, alternatively there are really fast scanners out there :) It's *really* fun to use as an input tablet though! So let's support this for everybody. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: ti_am335x_tsc - use variable name for sizeof() operatorAndrew F. Davis1-1/+1
Fix the code formatting to use the kernel preferred style of using the actual variables to determize the size using the sizeof() operator. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: update input_mt_report_pointer_emulation to support hoveringKT Liao1-1/+16
For devices that are incapable of reporting per-contact distance and can only report ABS_DISTANCE, just distance is not enough for upper layers of OS to determine whether contact is leaving the area or if it is continuing hovering, we need BTN_TOOL_FINGER for that: Contact State Inactive Hovering Active (far away) (inside hover area) (touching surface) BTN_TOUCH 0 0 1 BTN_TOOL_FINGER 0 1 1 ABS_DISTANCE N/A 1 0 Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: raydium_i2c_ts - do not ignore EPROBE_DEFER from gpiod_get_optionalDmitry Torokhov1-6/+5
We should not be ignoring -EPROBE_DEFER reported by devm_gpiod_get_optional(), but report it as any other error to the upper layers. While we are at it simplify check for the presence of reset GPIO and instead of using IS_ERR_OR_NULL just use boolean. Also do not return -ENOMEM from suspend handler when the device in bootloader mode as that does not make sense and switch to -EBUSY instead. Reported-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: add Raydium I2C touchscreen driverJeffrey Lin3-0/+1229
This adds support for Raydium I2C touch controllers compatible with RM32380. Signed-off-by: Jeffrey Lin <jeffrey.lin@rad-ic.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: surface3_spi - add surface pen support for Surface 3Stephen Just1-2/+112
This change creates a second input device which will handle input from a Surface Pen. The Surface Pen supplies a different packet header than touch events, so it is simple to handle one or the other. This patch handles both the newer Surface Pen with one button, and the older variant with a second button to switch to Eraser mode. Signed-off-by: Stephen Just <stephenjust@gmail.com> Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: surface3_spi - Prepare to add support for Surface PenStephen Just1-13/+26
Surface Pens can be supported by handling a second report type. Prepare for this change. Signed-off-by: Stephen Just <stephenjust@gmail.com> Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-25Input: tc3589x-keypad - remove stray ')'Clifton Barnes1-1/+1
The end ')' needs to be removed if the macro is ever used or there would be a compiler error as it does not have a matching '('. Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: add new driver for the Surface 3Benjamin Tissoires3-0/+318
This is a basic driver for the Surface 3. I am not so sure it will work with any firmwares as most values are encoded, but given that I only have access to my current device with its firmware and I don't have the datasheet, it should be OK for now. The Surface Pen is not supported (if it is supposed to be). I'll work on this when I get one. Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: feed more data into entropy poolDmitry Torokhov1-4/+3
Commit 4369c64c79a22 ("Input: Send events one packet at a time") significantly reduced amount of entropy input core was feeding to the rest of the system, because only the very first event in the event block would be used as source of entropy. With this change we will be calling add_input_randomness() for every event that is not filtered by the input core as a duplicate. In addition, all EV_SYN events are ignored. Acked-by: Henrik Rydberg <rydberg@bitmath.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: synaptics-rmi4 - fix spelling in definesNick Dyer1-11/+11
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: migor-ts - mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The migor touchscreen driver is now available for COMPILE_TEST, so we run into a harmless randconfig warning on ARM when CONFIG_PM is disabled: drivers/input/touchscreen/migor_ts.c:216:12: error: 'migor_ts_resume' defined but not used [-Werror=unused-function] drivers/input/touchscreen/migor_ts.c:205:12: error: 'migor_ts_suspend' defined but not used [-Werror=unused-function] This shuts up the warning by marking the two functions as __maybe_unused. We could do the same thing by adding an #ifdef, but this version is more reliable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: atmel_captouch - add dependence on i2cArnd Bergmann1-0/+1
The newly added Atmal captouch driver fails to build when CONFIG_I2C is disabled: drivers/input/misc/atmel_captouch.c: In function 'atmel_read': drivers/input/misc/atmel_captouch.c:115:8: error: implicit declaration of function 'i2c_transfer' [-Werror=implicit-function-declaration] This adds an explicit Kconfig dependency to prevent the broken configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b06d43f7a3db ("Input: add Atmel Captouch Button driver") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-18Input: add Atmel Captouch Button driverDaniel Hung-yu Wu3-0/+304
Add I2C driver for Atmel Capacitive Touch Button device. Signed-off-by: Hung-yu Wu <hywu@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-18Input: migor-ts - allow driver to build if COMPILE_TEST is enabledJavier Martinez Canillas1-1/+1
The driver only has runtime but no build time dependency with SH_MIGOR, so it can be built for testing purposes if the COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that drivers are not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-18Input: migor-ts - fix error for modular buildJavier Martinez Canillas1-1/+1
There is a typo in the driver for the I2C device table that is passed to the MODULE_DEVICE_TABLE() macro, this leads to the following build error: CC [M] drivers/input/touchscreen//migor_ts.o drivers/input/touchscreen//migor_ts.c:233:21: error: 'migor_ts' undeclared here (not in a function) MODULE_DEVICE_TABLE(i2c, migor_ts); ^ drivers/input/touchscreen//migor_ts.c:233:31: error: '__mod_i2c__migor_ts_device_table' aliased to undefined symbol 'migor_ts' MODULE_DEVICE_TABLE(i2c, migor_ts); ^ scripts/Makefile.build:295: recipe for target 'drivers/input/touchscreen//migor_ts.o' failed make[1]: *** [drivers/input/touchscreen//migor_ts.o] Error 1 Makefile:1446: recipe for target '_module_drivers/input/touchscreen/' failed make: *** [_module_drivers/input/touchscreen/] Error 2 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-09Input: rotary-encoder - fix bare use of 'unsigned'Clifton Barnes1-4/+4
fix checkpatch.pl warning about 'Prefer 'unsigned int' to bare use of 'unsigned'' Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-04Input: cm109 - spin_lock in complete() cleanupMing Lei1-4/+6
Complete() will be run with interrupt enabled, so change to spin_lock_irqsave(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-04Input: cm109 - fix handling of volume and mute buttonsFlorian Euchner1-7/+30
The CM109 driver reported key press events of volume up / down and record / playback mute buttons, but no release events. Report those events properly by handling volume and mute keys seperately. For the record and playback mute buttons, only presses are registered by the CM109, therefore simulate press-n-release. This fixes the volume control buttons of various USB headsets. Signed-off-by: Florian Euchner <florian.euchner@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-29Input: byd - don't wipe dynamically allocated memory twiceVladimir Zapolskiy1-1/+0
Since memory for a private data is allocated by kzalloc() there is no need to fill it with zeroes immediately after the allocation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-29Input: twl4030 - fix unsafe macro definitionRui Teng1-12/+16
The bitwise shift operator has lower priority than plus operator. So the values on macros should be enclosed in parentheses. For example, "(1 << 4 + 1)" means "(1 << (4 + 1))", but it is not expected by the macros. And also fix other two coding style problems reported by scripts/checkpatch.pl. Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-25Input: twl6040-vibra - remove mutexH. Nikolaus Schaller1-13/+2
The mutex does not seem to be needed. twl4030-vibra doesn't use one either. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-06Input: bcm_iproc_tsc - use syscon to access shared registersRaveendra Padasalagi1-34/+43
In Cygnus SOC touch screen controller registers are shared with ADC and flex timer. Using readl/writel could lead to race condition. So touch screen driver is enhanced to support register access using syscon framework API's to take care of mutually exclusive access. Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPSDmitry Torokhov1-12/+4
Instead of doing the dance with macro that either resolves to a pointer or NULL, let's switch to using SIMPLE_DEV_PM_OPS(). Also let's mark suspend and resume methods as __maybe_unused instead of guarding them with an #ifdef and rely on linker to drop unused code. Doing so should allow better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val()Dmitry Torokhov1-25/+0
Commit f799a3d8fe170159257b75c1baf48a7c1f625d1d ("Input: omap-keypad: Remove dependencies to mach includes") removed users of the above functions, but left them in the code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - drop empty PM stubsDmitry Torokhov1-21/+0
There is no reason to have empty suspend and resume stubs. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - remove adjusting of scan delayDmitry Torokhov1-5/+1
As of 35f8679f577ae5673a778598bcbe7b45cbec8923 ("Input: omap-keypad - remove dead check") we no longer declare keypresses as spurious, therefore we can use constant delay between scans. Suggested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: kbtab - stop saving struct usb_deviceOliver Neukum1-4/+4
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: gtco - stop saving struct usb_deviceOliver Neukum1-12/+12
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: aiptek - stop saving struct usb_deviceOliver Neukum1-9/+11
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: acecad - stop saving struct usb_deviceOliver Neukum1-6/+6
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-23Input: sur40 - fix DMA on stackOliver Neukum1-7/+14
During the initialisation the driver uses a buffer on the stack for DMA. That violates the cache coherency rules. The fix is to allocate the buffer with kmalloc(). Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-23Input: ati_remote2 - fix crashes on detecting device with invalid descriptorVladis Dronov1-6/+30
The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: synaptics - handle spurious release of trackstick buttons, againBenjamin Tissoires1-2/+3
Looks like the fimware 8.2 still has the extra buttons spurious release bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: synaptics-rmi4 - remove check of Non-NULL arrayAndrew Duggan1-3/+2
Originally the irq_mask member of rmi_function was a pointer. Then it was switched to being a zero length array. However, the checks for a NULL pointer where not removed. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: byd - enable absolute modeRichard Pospesel2-198/+369
The Windows driver's settings dialog contains a visualization of the regions for the hardware edge scrolling capability, which uses a temporarily-enabled limited-resolution absolute mode. This patch enables this during normal operation, and combines the absolute packets with the existing relative packets to provide accurate absolute position and touch reporting. It also adds documentation for all known gesture packets and initialization commands. Reviewed-by: Chris Diamand <chris@diamand.org> Signed-off-by: Richard Pospesel <pospeselr@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: ims-pcu - sanity check against missing interfacesOliver Neukum1-0/+4
A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-16Input: melfas_mip4 - add hw_version sysfs attributeSangwon Jee1-1/+27
Add hw_version sysfs attribute for retrieving hardware information from firmware. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-20 20:12:39 +0000