| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds a sbc_check_dpofua() function that performs sanity
checks for DPO/FUA command bits.
It introduces checks to fail when either bit is set, but the backend
device is not advertising support for them.
It also moves the existing cmd->se_cmd_flags |= SCF_FUA assignement
into the new helper function.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds a call to sbc_check_prot() within sbc_setup_write_same()
code to perform the various protection releated sanity checks, including
failing if WRPROTECT or RDPROTECT is set for a backend device that has
not advertised support for T10-PI.
Also, since WRITE_SAME + T10-PI is currently not supported by IBLOCK +
FILEIO backends, go ahead and fail if ->execute_write_same() is invoked
with a non zero cmd->prot_op.
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds an explicit check for WRPROTECT + RDPROTECT bit usage
within sbc_check_prot(), and fails with TCM_INVALID_CDB_FIELD if the
backend device does not have protection enabled.
Also, update sbc_check_prot() to return sense_reason_t in order to
propigate up the correct sense ASQ.
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds a check to sbc_parse_cdb() in order to detect when
an LBA + sector vs. end-of-device calculation wraps when the LBA is
sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF).
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds a check to sbc_setup_write_same() to verify
the incoming WRITE_SAME LBA + number of blocks does not exceed
past the end-of-device.
Also check for potential LBA wrap-around as well.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch addresses a bug reported during iser-target login/logout
stress testing, where iscsit_take_action_for_connection_exit() is
incorrectly invoking iscsit_close_connection() twice during IN_LOGOUT
state, after connection shutdown has already been initiated by
iser-target code.
Here is the backtrace:
BUG: unable to handle kernel NULL pointer dereference at 00000000000001f0
IP: [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod]
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: target_core_pscsi(O) target_core_file(O) target_core_iblock(O) ib_isert(O) iscsi_target_mod(O) ib_srpt(O) tcm_loop(O) tcm_fc(O) target_core_mod(O) mst_pciconf(OE) bonding mlx5_ib(O) mlx5_core libfc scsi_transport_fc netconsole configfs nfsv3 nfs_acl mlx4_ib(O) rdma_ucm(O) ib_ucm(O) rdma_cm(O) iw_cm(O) ib_uverbs(O) libiscsi_tcp libiscsi scsi_transport_iscsi mlx4_en mlx4_core ib_ipoib(O) ib_cm(O) ib_sa(O) ib_umad(O) ib_mad(O) ib_core(O) ib_addr(O) rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace autofs4 sunrpc 8021q garp stp llc ipv6 dm_mirror dm_region_hash dm_log dm_multipath uinput ipmi_si ipmi_msghandler acpi_pad iTCO_wdt iTCO_vendor_support dcdbas microcode pcspkr wmi sb_edac edac_core sg lpc_ich mfd_core shpchp tg3 ptp pps_core dm_mod ext3(E) jbd(E) mbcache(E) sr_mod(E) cdrom(E) sd_mod(E) ahci(E) libahci(E) megaraid_sas(E) [last unloaded: target_core_mod]
CPU: 2 PID: 5280 Comm: iscsi_ttx Tainted: G W OE 3.18.0-rc2+ #22
Hardware name: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.0.9 03/08/2013
task: ffff8806132f9010 ti: ffff880601d6c000 task.ti: ffff880601d6c000
RIP: 0010:[<ffffffffa033d992>] [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod]
RSP: 0018:ffff880601d6fe18 EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffff8805dc437800 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffffa033d98b
RBP: ffff880601d6fe28 R08: 0000000000000000 R09: 000000000000dd37
R10: 00000000ec5d4202 R11: 0000000000000001 R12: ffff8805dc437bf4
R13: ffff88061b831600 R14: ffff880601d6fe58 R15: ffff8806132f9010
FS: 0000000000000000(0000) GS:ffff88032fa20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001f0 CR3: 0000000001a14000 CR4: 00000000000407e0
Stack:
ffff8805dc437800 fffffffffffffe00 ffff880601d6feb8 ffffffffa034ed40
ffff8806132f9010 ffff880601d6fe70 0f00000000000000 ffff8805d51fbef0
0000000000000000 ffff8806132f9010 ffffffff8108e7f0 ffff880601d6fe70
Call Trace:
[<ffffffffa034ed40>] iscsi_target_tx_thread+0x160/0x220 [iscsi_target_mod]
[<ffffffff8108e7f0>] ? bit_waitqueue+0xb0/0xb0
[<ffffffffa034ebe0>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[<ffffffff8107017e>] kthread+0xce/0xf0
[<ffffffff810700b0>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff815a0b6c>] ret_from_fork+0x7c/0xb0
[<ffffffff810700b0>] ? kthread_freezable_should_stop+0x70/0x70
Code: 06 0f 84 82 00 00 00 3c 08 74 4e f6 05 39 e6 02 00 04 0f 85 9e 00 00 00 c6 43 19 08 4c 89 e7 e8 65 2a 26 e1 48 8b 83 a0 04 00 00 <48> 8b 88 f0 01 00 00 80 b9 d8 04 00 00 02 74 2e f6 05 31 e6 02
RIP [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod]
RSP <ffff880601d6fe18>
CR2: 00000000000001f0
---[ end trace a0c33436cd0836b4 ]---
This special case is still required by ISCSI_TCP transport during a
iscsit_handle_logout_cmd() failure case in iscsi_target_rx_opcode(),
but must be avoided for iser-target.
Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reported-by: Slava Shwartsman <valyushash@gmail.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Slava Shwartsman <valyushash@gmail.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation
for write-out of PR APTPL metadata that Martin has recently been
running into.
It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed
memory instead of kzalloc, and increases the default hardcoded
length to 256k.
It also adds logic in core_scsi3_update_and_write_aptpl() to double
the original length upon core_scsi3_update_aptpl_buf() failure, and
retries until the vzalloc'ed buffer is large enough to accommodate
the outgoing APTPL metadata.
Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code. It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.
Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.
[ 60.782534] ------------[ cut here ]------------
[ 60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[ 60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[ 60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib]
[ 60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[ 60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[ 60.782599] 0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[ 60.782602] ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[ 60.782605] ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[ 60.782607] Call Trace:
[ 60.782611] [<ffffffff81553ae7>] dump_stack+0x49/0x62
[ 60.782615] [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0
[ 60.782618] [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50
[ 60.782620] [<ffffffff81280933>] __list_del_entry+0x63/0xd0
[ 60.782622] [<ffffffff812809b1>] list_del+0x11/0x40
[ 60.782630] [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[ 60.782635] [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[ 60.782642] [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[ 60.782647] [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[ 60.782652] [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[ 60.782655] [<ffffffff8106f99e>] kthread+0xce/0xe0
[ 60.782657] [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[ 60.782660] [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0
[ 60.782662] [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[ 60.782663] ---[ end trace 9662f4a661d33965 ]---
Since this code is no longer used, go ahead and drop the problematic usage
all-together.
Reported-by: Gavin Guo <gavin.guo@canonical.com>
Reported-by: Moussa Ba <moussaba@micron.com>
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
In case sendtargets response is larger than initiator MRDSL, we
send a partial sendtargets response (setting F=0, C=1, TTT!=0xffffffff),
accept a consecutive empty text message and send the rest of the payload.
In case we are done, we set F=1, C=0, TTT=0xffffffff.
We do that by storing the sendtargets response bytes done under
the session.
This patch also makes iscsit_find_cmd_from_itt public for isert.
(Re-add cmd->maxcmdsn_inc and clear in iscsit_build_text_rsp - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
The macro isert_dbg already ensures that __func__ is part of the
output, so there's no reason to duplicate the function name in the
format string itself.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This code in vhost_scsi_make_tpg() is confusing because we limit "tpgt"
to UINT_MAX but the data type of "tpg->tport_tpgt" and that is a u16.
I looked at the context and it turns out that in
vhost_scsi_set_endpoint(), "tpg->tport_tpgt" is used as an offset into
the vs_tpg[] array which has VHOST_SCSI_MAX_TARGET (256) elements so
anything higher than 255 then it is invalid. I have made that the limit
now.
In vhost_scsi_send_evt() we mask away values higher than 255, but now
that the limit has changed, we don't need the mask.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
There is a large amount of code that still references the original
'tcm_vhost' naming conventions, instead of modern 'vhost_scsi'.
Go ahead and do a global rename to make the usage consistent.
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
With the recent removal of MSG_*_TAG defines in commit 68d81f40,
vhost-scsi is now using TCM_*_TAG and doesn't depend upon host
side scsi_tcq.h definitions anymore.
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Signal support of VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits
required for virtio-scsi 1.0 spec layout requirements.
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds ANY_LAYOUT compatible support within the existing
vhost_scsi_handle_vq() ->handle_kick() callback.
It calculates data_direction + exp_data_len for the new tcm_vhost_cmd
descriptor by walking both outgoing + incoming iovecs using iov_iter,
assuming the layout of outgoing request header + T10_PI + Data payload
comes first.
It also uses copy_from_iter() to copy leading virtio-scsi request header
that may or may not include SCSI CDB, that returns a re-calculated iovec
to start of T10_PI or Data SGL memory.
Also, go ahead and drop the legacy pre virtio v1.0 !ANY_LAYOUT logic.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds ANY_LAYOUT prerequisites logic for accepting a set of
protection + data payloads via iov_iter. Also includes helpers for
calcuating SGLs + invoking vhost_scsi_map_to_sgl() with a known number
of iovecs.
Required by ANY_LAYOUT processing when struct iovec may be offset into
the first outgoing virtio-scsi request header.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch changes vhost_scsi_map_to_sgl() parameters to accept virtio
iovec ptr + len when determing pages_nr.
This is currently done with iov_num_pages() -> PAGE_ALIGN, so allow
the same parameters as well.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch fixes vhost_scsi_handle_vq() failure cases that result in BUG_ON()
getting triggered when vhost_scsi_free_cmd() is called, and ->tvc_se_cmd has
not been initialized by target_submit_cmd_map_sgls().
It changes tcm_vhost_release_cmd() to use tcm_vhost_cmd->tvc_nexus for obtaining
se_session pointer reference. Also, avoid calling put_page() on NULL sg->page
entries in vhost_scsi_map_to_sgl() failure path.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Required for ANY_LAYOUT support when the incoming virtio-scsi response
header + fixed size sense buffer payload may span more than a single
iovec entry.
This changes existing code to save cmd->tvc_resp_iov instead of the
first single iovec base pointer from &vq->iov[out].
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
if text message dlength is 0, don't allocate a buffer for it, pass
NULL to iscsit_process_text_cmd.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
No reason to allocate a buffer of size bigger than initiator
MaxRecvDataSegmentLength. Moreover, we need to respect initiator
MRDSL and not send a larger payload.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Reduce code duplication.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Bound workqueues might be too restrictive since they allow
only a single core per session for processing completions.
WQ_UNBOUND will allow bouncing to another CPU if the running
CPU is currently busy. Luckily, our workqueues are NUMA aware
and will first try to bounce within the same NUMA socket.
My measurements with NULL backend devices show that there is
no (noticeable) additional latency as a result of the change.
I'd expect even to gain performance when working with fast
devices that also allocate MSIX interrupt vectors.
While we're at it, make it WQ_HIGHPRI since processing
completions is really a high priority for performance.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reported-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
We are sending text response and not reject.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
isert_debug_level should be static, hence no need
to initialize it.
Reported-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Seems strange to see in include/target/iscsi/iscsi_transport.h:
include "../../../drivers/target/iscsi/iscsi_target_core.h"
Move it to it's natural location.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch changes srpt_close_session() to properly use an unsigned long
for wait_for_completion_timeout()'s return value, and to update WARN_ON()
to only trigger for a zero return.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Instead of pushing each byte via stack the %*ph specifier allows to supply just
a pointer and length of the buffer. The patch converts code to use the
specifier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Instead of pushing each byte via stack let's use custom specifier which allows
to print small buffers as a hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
git://git.linaro.org/people/mike.turquette/linux
Pull clk framework updates from Mike Turquette:
"This is much later than usual due to several last minute bugs that had
to be addressed. As usual the majority of changes are new drivers and
modifications to existing drivers. The core recieved many fixes along
with the groundwork for several large changes coming in the future
which will better parition clock providers from clock consumers"
* tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
ARM: OMAP3: clock: fix boot breakage in legacy mode
ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs
clk: Really fix deadlock with mmap_sem
clk: mmp: fix sparse non static symbol warning
clk: Change clk_ops->determine_rate to return a clk_hw as the best parent
clk: change clk_debugfs_add_file to take a struct clk_hw
clk: Don't expose __clk_get_accuracy
clk: Don't try to use a struct clk* after it could have been freed
clk: Remove unused function __clk_get_prepare_count
clk: samsung: Fix double add of syscore ops after driver rebind
clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi
clk: samsung: exynos4415: Fix build with PM_SLEEP disabled
clk: samsung: remove unnecessary inclusion of header files from clk.h
clk: samsung: remove unnecessary CONFIG_OF from clk.c
clk: samsung: Spelling s/bwtween/between/
clk: rockchip: Add support for the mmc clock phases using the framework
clk: rockchip: add bindings for the mmc clocks
clk: rockchip: rk3288 export i2s0_clkout for use in DT
clk: rockchip: use clock ID for DMC (memory controller) on rk3288
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Included are two bugfixes needing some bigger refactoring (sh_mobile:
deferred probe with DMA, mv64xxx: fix offload support) and one
deprecated driver removal I thought would go in via ppc but I
misunderstood. It has a proper ack from BenH"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: fix uninitialized var when debug is enabled
macintosh: therm_pm72: delete deprecated driver
i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
i2c: sh_mobile: rework deferred probing
i2c: sh_mobile: refactor DMA setup
i2c: mv64xxx: rework offload support to fix several problems
i2c: mv64xxx: use BIT() macro for register value definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI update from James Bottomley:
"This is a much shorter set of patches that were on the go but didn't
make it in to the early pull request for the merge window. It's
really a set of bug fixes plus some final cleanup work on the new tag
queue API"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
storvsc: ring buffer failures may result in I/O freeze
ipr: set scsi_level correctly for disk arrays
ipr: add support for async scanning to speed up boot
scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case
scsi_debug: take sdebug_host_list_lock when changing capacity
scsi_debug: improve driver description in Kconfig
scsi_debug: fix compare and write errors
qla2xxx: fix race in handling rport deletion during recovery causes panic
scsi: blacklist RSOC for Microsoft iSCSI target devices
scsi: fix random memory corruption with scsi-mq + T10 PI
Revert "[SCSI] mpt3sas: Remove phys on topology change"
Revert "[SCSI] mpt2sas: Remove phys on topology change."
esas2r: Correct typos of "validate" in a comment
fc: FCP_PTA_SIMPLE is 0
ibmvfc: remove unused tag variable
scsi: remove MSG_*_TAG defines
scsi: remove scsi_set_tag_type
scsi: remove scsi_get_tag_type
scsi: never drop to untagged mode during queue ramp down
scsi: remove ->change_queue_type method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull CONFIG_PM_RUNTIME elimination from Rafael Wysocki:
"This removes the last few uses of CONFIG_PM_RUNTIME introduced
recently and makes that config option finally go away.
CONFIG_PM will be available directly from the menu now and also it
will be selected automatically if CONFIG_SUSPEND or CONFIG_HIBERNATION
is set"
* tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: Eliminate CONFIG_PM_RUNTIME
tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM
sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM
spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile #3 from Al Viro:
"Assorted fixes and patches from the last cycle"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[regression] chunk lost from bd9b51
vfs: make mounts and mountstats honor root dir like mountinfo does
vfs: cleanup show_mountinfo
init: fix read-write root mount
unfuck binfmt_misc.c (broken by commit e6084d4)
vm_area_operations: kill ->migrate()
new helper: iter_is_iovec()
move_extent_per_page(): get rid of unused w_flags
lustre: get rid of playing with ->fs
btrfs: filp_open() returns ERR_PTR() on failure, not NULL...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"The highlights this merge window include:
- Allow target fabric drivers to function as built-in. (Roland)
- Fix tcm_loop multi-TPG endpoint nexus bug. (Hannes)
- Move per device config_item_type into se_subsystem_api, allowing
configfs attributes to be defined at module_init time. (Jerome +
nab)
- Convert existing IBLOCK/FILEIO/RAMDISK/PSCSI/TCMU drivers to use
external configfs attributes. (nab)
- A number of iser-target fixes related to active session + network
portal shutdown stability during extended stress testing. (Sagi +
Slava)
- Dynamic allocation of T10-PI contexts for iser-target, fixing a
potentially bogus iscsi_np->tpg_np pointer reference in >= v3.14
code. (Sagi)
- iser-target performance + scalability improvements. (Sagi)
- Fixes for SPC-4 Persistent Reservation AllRegistrants spec
compliance. (Ilias + James + nab)
- Avoid potential short kern_sendmsg() in iscsi-target for now until
Al's conversion to use msghdr iteration is merged post -rc1.
(Viro)
Also, Sagi has requested a number of iser-target patches (9) that
address stability issues he's encountered during extended stress
testing be considered for v3.10.y + v3.14.y code. Given the amount of
LOC involved, it will certainly require extra backporting effort.
Apologies in advance to Greg-KH & Co on this. Sagi and I will be
working post-merge to ensure they each get applied correctly"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (53 commits)
target: Allow AllRegistrants to re-RESERVE existing reservation
uapi/linux/target_core_user.h: fix headers_install.sh badness
iscsi-target: Fail connection on short sendmsg writes
iscsi-target: nullify session in failed login sequence
target: Avoid dropping AllRegistrants reservation during unregister
target: Fix R_HOLDER bit usage for AllRegistrants
iscsi-target: Drop left-over bogus iscsi_np->tpg_np
iser-target: Fix wc->wr_id cast warning
iser-target: Remove code duplication
iser-target: Adjust log levels and prettify some prints
iser-target: Use debug_level parameter to control logging level
iser-target: Fix logout sequence
iser-target: Don't wait for session commands from completion context
iser-target: Reduce CQ lock contention by batch polling
iser-target: Introduce isert_poll_budget
iser-target: Remove an atomic operation from the IO path
iser-target: Remove redundant call to isert_conn_terminate
iser-target: Use single CQ for TX and RX
iser-target: Centralize completion elements to a context
iser-target: Cast wr_id with uintptr_t instead of unsinged long
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"After stopping the full x86/apic branch, I took some time to go
through the first block of patches again, which are mostly cleanups
and preparatory work for the irqdomain conversion and ioapic hotplug
support.
Unfortunaly one of the real problematic commits was right at the
beginning, so I rebased this portion of the pending patches without
the offenders.
It would be great to get this into 3.19. That makes reworking the
problematic parts simpler. The usual tip testing did not unearth any
issues and it is fully bisectible now.
I'm pretty confident that this wont affect the calmness of the xmas
season.
Changes:
- Split the convoluted io_apic.c code into domain specific parts
(vector, ioapic, msi, htirq)
- Introduce proper helper functions to retrieve irq specific data
instead of open coded dereferencing of pointers
- Preparatory work for ioapic hotplug and irqdomain conversion
- Removal of the non functional pci-ioapic driver
- Removal of unused irq entry stubs
- Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC
allocations for everything which is called from there.
- Small cleanups and fixes"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ
iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ
x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ
x86, irq: Use helpers to access irq_cfg data structure associated with IRQ
x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC
x86, irq: Move IRQ initialization routines from io_apic.c into vector.c
x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h
x86, irq: Move HT IRQ related code from io_apic.c into htirq.c
x86, irq: Move PCI MSI related code from io_apic.c into msi.c
x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities
x86, irq: Make UP version of irq_complete_move() an inline stub
x86, irq: Move local APIC related code from io_apic.c into vector.c
x86, irq: Introduce helpers to access struct irq_cfg
x86, irq: Protect __clear_irq_vector() with vector_lock
x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()
x86, irq: Refine hw_irq.h to prepare for irqdomain support
x86, irq: Convert irq_2_pin list to generic list
x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector()
x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI
x86, irq: Introduce helper to check whether an IOAPIC has been registered
...
|
|
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ update from Thomas Gleixner:
"Remove the call into the nohz idle code from the fake 'idle' thread in
the powerclamp driver along with the export of those functions which
was smuggeled in via the thermal tree. People have tried to hack
around it in the nohz core code, but it just violates all rightful
assumptions of that code about the only valid calling context (i.e.
the proper idle task).
The powerclamp trainwreck will still work, it just wont get the
benefit of long idle sleeps"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/powerclamp: Remove tick_nohz_idle abuse
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull second batch of powerpc updates from Michael Ellerman:
"The highlight is the series that reworks the idle management on
powernv, which allows us to use deeper idle states on those machines.
There's the fix from Anton for the "BUG at kernel/smpboot.c:134!"
problem.
An i2c driver for powernv. This is acked by Wolfram Sang, and he
asked that we take it through the powerpc tree.
A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of
the audit maintainers.
A patch from Ben to export the symbol map of our OPAL firmware as a
sysfs file, so that tools can use it.
Also some CXL fixes, a couple of powerpc perf fixes, a fix for
smt-enabled, and the patch to add __force to get_user() so we can use
bitwise types"
* tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc/powernv: Ignore smt-enabled on Power8 and later
powerpc/uaccess: Allow get_user() with bitwise types
powerpc/powernv: Expose OPAL firmware symbol map
powernv/powerpc: Add winkle support for offline cpus
powernv/cpuidle: Redesign idle states management
powerpc/powernv: Enable Offline CPUs to enter deep idle states
powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode
i2c: Driver to expose PowerNV platform i2c busses
powerpc: add little endian flag to syscall_get_arch()
power/perf/hv-24x7: Use kmem_cache_free() instead of kfree
powerpc/perf/hv-24x7: Use per-cpu page buffer
cxl: Unmap MMIO regions when detaching a context
cxl: Add timeout to process element commands
cxl: Change contexts_lock to a mutex to fix sleep while atomic bug
powerpc: Secondary CPUs must set cpu_callin_map after setting active and online
|
|
I'm leaving Red Hat at the end of December 2014, so remove all
references to my soon-to-be-dead address.
(There are some references left in the tree, that need additional
changes, I'll send those through the AGP maintainers).
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new driver is around for more than 2 years now, so the old one can
go. Getting rid of it helps the removal of the legacy .attach_adapter
callback of the I2C subsystem.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The 8250_omap serial driver is a new user of CONFIG_PM_RUNTIME.
However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM in 8250_omap.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A couple of new CONFIG_PM_RUNTIME users have been added recently
in the SPI subsystem.
However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/spi/ (again).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module
use" was merged via the thermal tree without an explicit ack from the
relevant maintainers.
The exports are abused by the intel powerclamp driver which implements
a fake idle state from a sched FIFO task. This causes all kinds of
wreckage in the NOHZ core code which rightfully assumes that
tick_nohz_idle_enter/exit() are only called from the idle task itself.
Recent changes in the NOHZ core lead to a failure of the powerclamp
driver and now people try to hack completely broken and backwards
workarounds into the NOHZ core code. This is completely unacceptable
and just papers over the real problem. There are way more subtle
issues lurking around the corner.
The real solution is to fix the powerclamp driver by rewriting it with
a sane concept, but that's beyond the scope of this.
So the only solution for now is to remove the calls into the core NOHZ
code from the powerclamp trainwreck along with the exports.
Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Pan Jacob jun <jacob.jun.pan@intel.com>
Cc: LKP <lkp@01.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull virtio fixes from Michael S Tsirkin:
"virtio 1.0 related fixes
Most importantly, this fixes using virtio_pci as a module.
Further, the big virtio 1.0 conversion missed a couple of places.
This fixes them up.
This isn't 100% sparse-clean yet because on many architectures
get_user triggers sparse warnings when used with __bitwise tag (when
same tag is on both pointer and value read).
I posted a patchset to fix it up by adding __force on all arches that
don't already have it (many do), when that's merged these warnings
will go away"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: restore module attributes
mic/host: fix up virtio 1.0 APIs
vringh: update for virtio 1.0 APIs
vringh: 64 bit features
tools/virtio: add virtio 1.0 in vringh_test
tools/virtio: add virtio 1.0 in virtio_test
tools/virtio: enable -Werror
tools/virtio: 64 bit features
tools/virtio: fix vringh test
tools/virtio: more stubs
virtio: core support for config generation
virtio_pci: add VIRTIO_PCI_NO_LEGACY
virtio_pci: move probe to common file
virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY
virtio_config: fix virtio_cread_bytes
virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are regression fixes (leds-gpio, ACPI backlight driver,
operating performance points library, ACPI device enumeration
messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
PM), some cleanups in the operating performance points (OPP)
framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
minor intel_pstate driver changes, a new MAINTAINERS entry for it and
an ACPI fan driver change needed for better support of thermal
management in user space.
Specifics:
- Fix a regression in leds-gpio introduced by a recent commit that
inadvertently changed the name of one of the properties used by the
driver (Fabio Estevam).
- Fix a regression in the ACPI backlight driver introduced by a
recent fix that missed one special case that had to be taken into
account (Aaron Lu).
- Drop the level of some new kernel messages from the ACPI core
introduced by a recent commit to KERN_DEBUG which they should have
used from the start and drop some other unuseful KERN_ERR messages
printed by ACPI (Rafael J Wysocki).
- Revert an incorrect commit modifying the cpupower tool (Prarit
Bhargava).
- Fix two regressions introduced by recent commits in the OPP library
and clean up some existing minor issues in that code (Viresh
Kumar).
- Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
tree (or drop it where that can be done) in order to make it
possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
Hansson, Ludovic Desroches).
There will be one more "CONFIG_PM_RUNTIME removal" batch after this
one, because some new uses of it have been introduced during the
current merge window, but that should be sufficient to finally get
rid of it.
- Make the ACPI EC driver more robust against race conditions related
to GPE handler installation failures (Lv Zheng).
- Prevent the ACPI device PM core code from attempting to disable
GPEs that it has not enabled which confuses ACPICA and makes it
report errors unnecessarily (Rafael J Wysocki).
- Add a "force" command line switch to the intel_pstate driver to
make it possible to override the blacklisting of some systems in
that driver if needed (Ethan Zhao).
- Improve intel_pstate code documentation and add a MAINTAINERS entry
for it (Kristen Carlson Accardi).
- Make the ACPI fan driver create cooling device interfaces witn
names that reflect the IDs of the ACPI device objects they are
associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").
That's necessary for user space thermal management tools to be able
to connect the fans with the parts of the system they are supposed
to be cooling properly. From Srinivas Pandruvada"
* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
MAINTAINERS: add entry for intel_pstate
ACPI / video: update the skip case for acpi_video_device_in_dod()
power / PM: Eliminate CONFIG_PM_RUNTIME
NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
ACPI / EC: Fix unexpected ec_remove_handlers() invocations
Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
ACPI / PM: Do not disable wakeup GPEs that have not been enabled
ACPI / utils: Drop error messages from acpi_evaluate_reference()
...
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver update from Darren Hart:
- thinkpad-acpi: Switch to software mute, cleanups
- acerhdf: Bang-bang thermal governor, new models, cleanups
- dell-laptop: New keyboard backlight support and documentation
- toshiba_acpi: Keyboard backlight updates, hotkey handling
- dell-wmi: Keypress filtering, WMI event processing
- eeepc-laptop: Multiple cleanups, improved error handling, documentation
- hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
- misc: Code cleanups, quirks, various new IDs
* tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits)
platform/x86/acerhdf: Still depends on THERMAL
Documentation: Add entry for dell-laptop sysfs interface
acpi: Remove _OSI(Linux) for ThinkPads
thinkpad-acpi: Try to use full software mute control
acerhdf: minor clean up
acerhdf: added critical trip point
acerhdf: Use bang-bang thermal governor
acerhdf: Adding support for new models
acerhdf: Adding support for "manual mode"
dell-smo8800: Add more ACPI ids and change description of driver
platform: x86: dell-laptop: Add support for keyboard backlight
toshiba_acpi: Add keyboard backlight mode change event
toshiba_acpi: Change notify funtion to handle more events
toshiba_acpi: Move hotkey enabling code to its own function
dell-wmi: Don't report keypresses on keybord illumination change
dell-wmi: Don't report keypresses for radio state changes
hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
toshiba-acpi: Add missing ID (TOS6207)
Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put"
platform: x86: Deletion of checks before backlight_device_unregister()
...
|
|
Pull small watchdog update from Wim Van Sebroeck:
- fix the argument of watchdog_active() in imx2_wdt
- Add power management support to the imx2_wdt watchdog.
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: imx2_wdt: Fix the argument of watchdog_active()
watchdog: imx2_wdt: Add power management support.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull second set of media updates from Mauro Carvalho Chehab:
- Move drivers for really old legacy hardware to staging. Those are
using obsolete media kAPIs and are for hardware that nobody uses for
years. Simply not worth porting them to the new kAPIs. Of course,
if anyone pops up to fix, we can move them back from there
- While not too late, do some API fixups at the new colorspace API,
added for v3.19
- Some improvements for rcar_vin driver
- Some fixups at cx88 and vivid drivers
- Some Documentation fixups
* tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] bq/c-qcam, w9966, pms: move to staging in preparation for removal
[media] tlg2300: move to staging in preparation for removal
[media] vino/saa7191: move to staging in preparation for removal
[media] MAINTAINERS: vivi -> vivid
[media] cx88: remove leftover start_video_dma() call
[media] cx88: add missing alloc_ctx support
[media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps
[media] vivid: fix CROP_BOUNDS typo for video output
[media] DocBook media: update version number and document changes
[media] vivid.txt: document new controls
[media] DocBook media: add missing ycbcr_enc and quantization fields
[media] v4l2-mediabus.h: use two __u16 instead of two __u32
[media] rcar_vin: Fix interrupt enable in progressive
[media] rcar_vin: Enable VSYNC field toggle mode
[media] rcar_vin: Add scaling support
[media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs
[media] rcar_vin: Add YUYV capture format support
|
