summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter226-226/+276
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-24drmi/rcar-du: prepare for drmP.h removal from drm_modeset_helper.hSam Ravnborg1-0/+1
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused rcar-du to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm x86 and arm allmodconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-6-sam@ravnborg.org
2019-01-24drm/bridge: cdns: prepare for drmP.h removal from drm_modeset_helper.hSam Ravnborg1-0/+2
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused cdns to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm x86 and arm allmodconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-5-sam@ravnborg.org
2019-01-24drm/arcpgu: prepare for drmP.h removal from drm_modeset_helper.hSam Ravnborg1-1/+2
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused arcgpu to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. List of include files sorted alphabetically. Build tested on arm x86 and arm allmodconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-4-sam@ravnborg.org
2019-01-24drm/hisilicon/kirin: prepare for drmP.h removal from drm_modeset_helper.hSam Ravnborg1-3/+8
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused kirin to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. List of include files sorted alphabetically. Build tested on arm x86 allmodconfig using the following hack to the Kconfig file: | - depends on DRM && OF && ARM64 | + depends on DRM && OF && (ARM64 || (X86_64 && COMPILE_TEST)) Build failed on 32bit ARM - so the X86_64 hack was required. The COMPILE_TEST hack is not submitted as the preferred fix is something where we have coverage on 32bit ARM too. v2: - Sort list of include files Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-3-sam@ravnborg.org
2019-01-24drm/stm: prepare for drmP.h removal from drm_modeset_helper.hSam Ravnborg2-2/+13
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused drm/stm to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm and x86 allmodconfig v2: - sort list of include files Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-2-sam@ravnborg.org
2019-01-24Merge drm/drm-next into drm-misc-nextMaxime Ripard153-3544/+3145
danvet needs a backmerge to ease the upcoming drmP.h rework Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-24drm/vkms: Fix flush_work() without INIT_WORK().Tetsuo Handa1-0/+1
syzbot is hitting a lockdep warning [1] because flush_work() is called without INIT_WORK() after kzalloc() at vkms_atomic_crtc_reset(). Commit 6c234fe37c57627a ("drm/vkms: Implement CRC debugfs API") added INIT_WORK() to only vkms_atomic_crtc_duplicate_state() side. Assuming that lifecycle of crc_work is appropriately managed, fix this problem by adding INIT_WORK() to vkms_atomic_crtc_reset() side. [1] https://syzkaller.appspot.com/bug?id=a5954455fcfa51c29ca2ab55b203076337e1c770 Reported-and-tested-by: syzbot <syzbot+12f1b031b6da017e34f8@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1547829823-9877-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
2019-01-24Merge tag 'drm-intel-next-2019-01-10' of ↵Dave Airlie110-3246/+2809
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Unwind failure on pinning the gen7 PPGTT (Chris) - Fastset updates to make sure DRRS and PSR are properly enabled (Hans) - Header include clean-up (Brajeswar, Jani) - Improvements and clean-up on debugfs (Chris, Jani) - Avoid division by zero on CNL clocks setup (Xiao) - Restrict PSMI context load w/a to Haswell GT1 (Chris) - Remove HW semaphores for gen7 inter-engine sync (Chris) - Pull the render flush into breadcrumb emission (Chris) - i915_params copy and free helpers and other reorgs and docs (Jani) - Remove has_pooled_eu static initializer (Tvrtko) - Updates on kerneldoc (Chris) - Remove redundant trailing request flush (Chris) - ringbuffer irq seqno fixes and clean-up (Chris) - splitting off runtime device info and other clean-up around (Jani) - Selftests improvements (Chris, Daniele) - Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris) - Some improvements and fixes around GPU reset and GPU hang report (Chris) - Remove partial attempt to swizzle on pread/pwrite (Chris) - Return immediately if trylock fails for direct-reclaim (Chris) - Downgrade scare message for unknown HuC firmware (Jani) - ACPI / PMIC for MIPI / DSI (Hans) - Reduce i915_request_alloc retirement to local context (Chris) - Init per-engine WAs for all engines (Daniele) - drop DPF code for gen8+ (Daniele) - Guard error capture against unpinned vma (Chris) - Use mutex_lock_killable from inside the shrinker (Chris) - Removing pooling from struct_mutex from vmap shrinker (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA # Conflicts: # drivers/gpu/drm/i915/intel_dp.c # drivers/gpu/drm/i915/intel_drv.h From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
2019-01-22drm/panel: panel-innolux: set display off in innolux_panel_unprepareHsin-Yi, Wang1-6/+5
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare(). This also fixes some mode check and irq timeout issue in MTK dsi code. Since some dsi code (e.g. mtk_dsi) have following call trace: 1. drm_panel_disable(), which calls innolux_panel_disable() 2. switch to cmd mode 3. drm_panel_unprepare(), which calls innolux_panel_unprepare() However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare. Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
2019-01-22drm/dp: Implement I2C_M_STOP for i2c-over-auxVille Syrjälä1-1/+2
Consult the I2C_M_STOP flag to determine whether to set the MOT bit or not. Makes it possible to send multiple messages in one go with stop+start generated between the messages (as opposed nothing or repstart depending on whether thr address/rw changed). Not sure anyone has actual use for this but figured I'd handle it since I started to look at that flag for MST remote i2c xfers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-3-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2019-01-22drm/dp: use DRM_DEBUG_DP() instead of drm_dbg for loggingJani Nikula1-4/+4
We have a wrapper for a reason. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121112758.10978-1-jani.nikula@intel.com
2019-01-21drm/stm: ltdc: remove set but not used variable 'src_h'YueHaibing1-3/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check': drivers/gpu/drm/stm/ltdc.c:694:13: warning: variable 'src_y' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ ^ drivers/gpu/drm/stm/ltdc.c:694:6: warning: variable 'src_x' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1538131180-34108-1-git-send-email-yuehaibing@huawei.com
2019-01-18drm/sun4i: frontend: Hook-in support for the A20Paul Kocialkowski1-0/+4
This adds the appropriate device-tree compatible for hooking frontend support for the A20. Since the hardware is very similar to the A10, it shares the same quirks (which were already introduced). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-24-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Hook-in support for the A10, with specific quirksPaul Kocialkowski1-0/+18
This adds the appropriate device-tree compatible and quirk data for hooking frontend support for the A20. It supports the FIR coefficients ready bit but not the access control bit. It also takes different phase values than the A33 for these coefficients. The compatible is already used in the A10 device-tree and already documented in the device-tree bindings. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-23-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Move the FIR filter phases to our quirksMaxime Ripard2-6/+27
The FIR filters phase depend on the SoC, so let's move it to our quirks structure instead of removing them. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-22-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Make COEF_RDY conditionalMaxime Ripard2-4/+6
The COEF_RDY bit isn't found in all the SoCs featuring some variant of the frontend. Add it to our quirks structure. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-21-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Set the coef_rdy bit right after the coef have been setMaxime Ripard1-0/+4
The COEF_RDY bit is used to tell the hardware that new FIR filters coefficients have been written to the registers and that the hardware should take them into account starting next frame. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-20-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add a quirk structureMaxime Ripard2-4/+23
The ACCESS_CTRL bit is not found on all the variants of the frontend, so let's introduce a structure that will hold whether or not we need to set it, and associate it with the compatible. This will be extended for further similar quirks later on. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-19-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Move access control before setting the register as documentedMaxime Ripard1-3/+4
Unlike what is currently being done, the ACCESS_CTRL bit documentation asks that this bit should be set before modifying any register. The code in the BSP also does this, so make sure we do this as well. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-18-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: drv: Allow framebuffer modifiers in mode configPaul Kocialkowski1-0/+1
This is the final step to indicate to the core that our driver supports framebuffer modifiers. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-17-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: layer: Add tiled modifier support and helperPaul Kocialkowski1-1/+15
This introduces a list of supported modifiers for the driver, that includes the Allwinner tiled modifier, as well as a format_mod_supported callback. The callback uses both the backend and frontend helpers to indicate per-format modifier support (including for the linear modifier). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-16-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add and use helper for checking tiling supportPaul Kocialkowski1-1/+23
This introduces a helper to check whether a frontend input format supports tiling mode. This helper is used when tiling is requested in the frontend format support helper. Only semiplanar and planar YUV formats are supported by the hardware. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-15-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Add buffer stride and offset configuration for tiling modePaul Kocialkowski2-3/+65
This introduces stride and offset configuration for the VPU tiling mode. Stride is calculated differently than it is for linear formats and an offset is calculated, for which new register definitions are introduced. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-14-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for tiled YUV input mode configurationPaul Kocialkowski2-4/+12
This introduces the data input mode definitions for the tiled YUV mode, that are used in the input mode helper if tiling is requested. The modifier is passed to the helper from the framebuffer to determine if tiling is requested. Only semiplanar and planar YUV formats are supported for tiling mode. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-13-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for planar YUV input formatsPaul Kocialkowski3-1/+66
Planar YUV formats come with 3 distinct planes, which requires configuring the frontend line stride and address registers for the third plane. Our hardware only supports the YUV planes order and in order to support formats with a YVU plane order, a helper is introduced to indicate whether to invert the address of the two chroma planes. Missing definitions for YUV411 and YUV444 input format configuration are also introduced as support is added for these formats. For the input sequence part, no configuration is required for planar YUV formats so zero is returned in that case. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-11-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for semi-planar YUV input formatsPaul Kocialkowski3-5/+55
Semi-planar YUV formats use two distinct planes, one for luminance and one for chrominance. To add support for them, we need to configure the second line stride and buffer address registers to setup the second YUV plane. New definitions are introduced to configure the input format register for the YUV420 and YUV422 semi-planar formats. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-10-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for packed YUV422 input formatsPaul Kocialkowski2-0/+27
This introduces support for packed YUV formats with 4:2:2 sampling using the frontend. Definitions are introduced for the data format and pixel sequence input format register values. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-9-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Configure and enable YUV to RGB CSC when neededPaul Kocialkowski2-2/+23
In prevision of adding support for YUV formats, set the YUV to RGB colorspace conversion coefficients if required and don't bypass the CSC engine when converting. The BT601 coefficients from the A33 BSP are copied over from the backend code. Because of module inter-dependency, we can't have the frontend use these coefficients from the backend directly. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-8-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Move the BT.601 CSC coefficients to the frontendPaul Kocialkowski3-22/+24
Both the backend and the frontend need the BT.601 CSC coefficients for YUV to RGB conversion. Since the backend has a dependency on the frontend (and not the other way round), move the coefficients there so that both can access them without having to duplicate them. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-7-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Determine input format based on colorspacePaul Kocialkowski1-6/+4
Since all the RGB input formats have the same value for the DATA_FMT field of the INPUT_FMT register, we can group them when the format is known to be RGB. Here, we assume that a non-YUV format is RGB, because the hardware does not support any other colorspace than RGB and YUV. Use the DRM format info structure to check whether the format uses a YUV colorspace. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-6-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Pass DRM format info to input format helpersPaul Kocialkowski1-7/+13
The helper returning the input mode needs to know the number of planes for the provided format. Passing the fourcc requires iterating through the format info list in order to return the number of planes. Pass the DRM format info structure directly instead to all helpers related to configuring the input format, since it's available to the caller. Also rename the input format in the caller function to keep things consistent. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-5-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: backend: Use explicit fourcc helpers for packed YUV422 checkPaul Kocialkowski1-1/+2
Checking for the number of planes is not sufficient to en ensure that the format is a packed YUV422. Use explicit fourcc helpers for the check instead. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-4-paul.kocialkowski@bootlin.com
2019-01-18drm/bridge: lvds-encoder: add powerdown-gpios supportPeter Rosin1-0/+34
Optionally power down the LVDS-encoder when it is not in use. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-6-peda@axentia.se
2019-01-18drm/bridge: lvds-encoder: add dev helper variable in .probe()Peter Rosin1-10/+9
Make the code easier to read and modify. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-5-peda@axentia.se
2019-01-18Merge tag 'drm-misc-next-2019-01-16' of ↵Dave Airlie135-1353/+2757
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.1: UAPI Changes: - New fourcc identifier for ARM Framebuffer Compression v1.3 Cross-subsystem Changes: Core Changes: - Reorganisation of drm_device and drm_framebuffer headers - Cleanup of the drmP inclusion - Fix leaks in the fb-helpers - Allow for depth different from bpp in fb-helper fbdev emulation - Remove drm_mode_object from drm_display_mode Driver Changes: - Add reflection properties to rockchip - a bunch of fixes for virtio - a bunch of fixes for dp_mst and drivers using it, and introduction of a new refcounting scheme - Convertion of bochs to atomic and generic fbdev emulation - Allow meson to remove the firmware framebuffers [airlied: patch rcar-du to add drm_modes.h] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
2019-01-17drm/tinydrm: Use damage helper for dirtyfbNoralf Trønnes11-283/+162
This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty handler. All flushing will now happen in the pipe functions. Also enable the damage plane property for all except repaper which can only do full updates. ili9225: This change made ili9225_init() equal to mipi_dbi_init() so use it. v3: Include vblank header (Sam) ili9225 and st7586 can't use mipi_dbi_enable_flush() (David) v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL (kbuild test robot) Cc: David Lechner <david@lechnology.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: David Lechner <david@lechnology.com> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-5-noralf@tronnes.org
2019-01-17drm/tinydrm: Use struct drm_rectNoralf Trønnes5-54/+59
This prepares for the switch to drm_atomic_helper_dirtyfb() in the next patch. The damage helper returns a drm_rect so switch to that everywhere including using a pointer in the dirty functions. This is a non-functional change except for the debug print which looks a bit different. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-4-noralf@tronnes.org
2019-01-17drm/damage-helper: Add drm_atomic_helper_damage_merged()Noralf Trønnes1-0/+41
Useful for drivers that only care about the combined damage. v2: Remove unnecessary clearing of damage clips Cc: Deepak Rawat <drawat@vmware.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-3-noralf@tronnes.org
2019-01-17drm/gem-fb-helper: Add drm_gem_fb_create_with_dirty()Noralf Trønnes1-6/+44
This adds a .fb_create helper that sets the .dirty callback to drm_atomic_helper_dirtyfb(). v2: Improve docs (Daniel) Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-2-noralf@tronnes.org
2019-01-17drm/cma-helper: Remove unused fbdev codeNoralf Trønnes3-149/+4
CMA helper drivers have been converted to drm_fbdev_generic_setup() so the fbdev code can be removed. v3: Remove CMA specific conditional in the generic fbdev client v2: Clean up the includes some more (Laurent) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114121059.20704-1-noralf@tronnes.org
2019-01-15drm/i915: Pass down rc in intel_encoder->compute_config()Lyude Paul13-112/+122
Something that I completely missed when implementing the new MST VCPI atomic helpers is that with those helpers, there's technically a chance of us having to grab additional modeset locks in ->compute_config() and furthermore, that means we have the potential to hit a normal modeset deadlock. However, because ->compute_config() only returns a bool this means we can't return -EDEADLK when we need to drop locks and try again which means we end up just failing the atomic check permanently. Whoops. So, fix this by modifying ->compute_config() to pass down an actual error code instead of a bool so that the atomic check can be restarted on modeset deadlocks. Thanks to Ville Syrjälä for pointing this out! Changes since v1: * Add some newlines * Return only -EINVAL from hsw_crt_compute_config() * Propogate return code from intel_dp_compute_dsc_params() * Change all of the intel_dp_compute_link_config*() variants * Don't miss if (hdmi_port_clock_valid()) branch in intel_hdmi_compute_config() Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
2019-01-15staging/vboxvideo: Don't set FBINFO_MISC_ALWAYS_SETPARDaniel Vetter1-5/+0
It's a debug hack flag useful to work around driver bugs. That's not a good idea for a new driver. Especially for a new drm driver. Aside: the fbdev support should probably be converted over to the new generic fbdev support. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190115102755.16183-1-daniel.vetter@ffwll.ch
2019-01-15drm: Remove use of drm_mode_objectShayenne Moura2-12/+2
This patch removes the drm_mode_object prints, evaluation and use from drm_display_mode objects used in drm files. It removes dependency from drm_mode_object. Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/785896b0a551464d0b780a55411707300802d6b6.1547214023.git.shayenneluzmoura@gmail.com
2019-01-15drm: armada: Cleanup drm_display_mode print strShayenne Moura1-7/+1
This patch adjust the print string of drm_display_mode object to remove drm_mode_object dependency in armada files. Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/dddd98f1a6687a37444d315adc4cbd8a692a8131.1547214023.git.shayenneluzmoura@gmail.com
2019-01-15drm/dp: annotate implicit fall throughsMathieu Malaterre1-0/+3
There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings (W=1). Fix them up. This commit remove the following warnings: include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=] include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely' drivers/gpu/drm/drm_dp_helper.c:155:3: note: in expansion of macro 'WARN' include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=] include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely' drivers/gpu/drm/drm_dp_helper.c:173:3: note: in expansion of macro 'WARN' drivers/gpu/drm/drm_dp_helper.c:547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190114202748.15584-1-malat@debian.org
2019-01-14drm/vblank: Allow dynamic per-crtc max_vblank_countVille Syrjälä1-3/+42
On i965gm we need to adjust max_vblank_count dynamically depending on whether the TV encoder is used or not. To that end add a per-crtc max_vblank_count that takes precedence over its device wide counterpart. The driver can now call drm_crtc_set_max_vblank_count() to configure the per-crtc value before calling drm_vblank_on(). Also looks like there was some discussion about exynos needing similar treatment. v2: Drop the extra max_vblank_count!=0 check for the WARN(last!=current), will take care of it in i915 code (Daniel) WARN_ON(!inmodeset) (Daniel) WARN_ON(dev->max_vblank_count) Pimp up the docs (Daniel) Cc: stable@vger.kernel.org Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-01-14drm/meson: remove firmware framebuffersMaxime Jourdan1-0/+20
In case we are using simplefb or another conflicting framebuffer, make the call to drm_fb_helper_remove_conflicting_framebuffers() Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181210092853.13050-1-mjourdan@baylibre.com
2019-01-14drm/mxsfb: Use drm_fbdev_generic_setup()Noralf Trønnes2-25/+2
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-3-noralf@tronnes.org
2019-01-14drm/hisilicon/kirin: Use drm_fbdev_generic_setup()Noralf Trønnes2-39/+3
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. struct kirin_drm_private can be removed now that driver doesn't have to store the fbdev pointer. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-2-noralf@tronnes.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-15 17:31:42 +0000