summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02liquidio: synchronize VF representor names with NIC firmwareVijaya Mohan Guvva4-1/+92
LiquidIO firmware supports a vswitch that needs to know the names of the VF representors in the host to maintain compatibility for direct programming using external Openflow agents. So, for each VF representor, send its name to the firmware when it gets registered and when its name changes. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: systemport: Only inspect valid switch port & queuesFlorian Fainelli2-2/+8
Hesoteric board configurations where port 0 is not available would still make SYSTEMPORT inspect the switch port 0, queue 0, which, not being enabled, would cause transmit timeouts over time. Just ignore those unconfigured rings instead. Fixes: 84ff33eeb23d ("net: systemport: Establish DSA network device queue mapping") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02nfp: bpf: support [BPF_ALU | BPF_ALU64] | BPF_NEGJiong Wang1-0/+24
This patch supports BPF_NEG under both BPF_ALU64 and BPF_ALU. LLVM recently starts to generate it. NOTE: BPF_NEG takes single operand which is an register and serve as both input and output. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02nfp: bpf: rename ALU_OP_NEG to ALU_OP_NOTJiong Wang2-2/+2
The current ALU_OP_NEG is Op encoding 0x4 for NPF ALU instruction. It is actually performing "~B" operation which is bitwise NOT. The using naming ALU_OP_NEG is misleading as NEG is -B which is not the same as ~B. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: dpaa: remove init which already done in per-cpu allocationyuan linyu1-5/+0
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: dpaa: fix maybe uninitialized var in dpaa_open()yuan linyu1-1/+2
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: sched: move the can_offload check from binding phase to rule insertion ↵Jiri Pirko9-2/+23
phase This restores the original behaviour before the block callbacks were introduced. Allow the drivers to do binding of block always, no matter if the NETIF_F_HW_TC feature is on or off. Move the check to the block callback which is called for rule insertion. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: hns3: remove a couple of redundant assignmentsColin Ian King1-3/+0
The assignment to kinfo is redundant as this is a duplicate of the initialiation of kinfo a few lines earlier, so it can be removed. The assignment to v_tc_info is never read, so this variable is redundant and can be removed completely. Cleans up two clang warnings: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c:433:34: warning: Value stored to 'kinfo' during its initialization is never read drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c:775:3: warning: Value stored to 'v_tc_info' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02liquidio: remove redundant setting of inst_processed to zeroColin Ian King1-2/+0
The zero value assigned to inst_processed at the end of each iteration of the do-while loop is overwritten on the next iteration and hence it is a redundant assignment and can be removed. Cleans up clang warning: drivers/net/ethernet/cavium/liquidio/request_manager.c:480:3: warning: Value stored to 'inst_processed' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02net: dl2k: remove redundant re-assignment to npColin Ian King1-1/+1
The pointer np is initialized and then re-assigned the same value a few lines later. Remove the redundant duplicated assignment. Cleans up clang warning: drivers/net/ethernet/dlink/dl2k.c:314:25: warning: Value stored to 'np' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02wan: wanxl: remove redundant assignment to statColin Ian King1-1/+0
stat set to zero and the value is never read, instead stat is set again in the do-loop. Hence the setting to zero is redundant and can be removed. Cleans up clang warning: drivers/net/wan/wanxl.c:737:2: warning: Value stored to 'stat' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller23-104/+216
Smooth Cong Wang's bug fix into 'net-next'. Basically put the bulk of the tcf_block_put() logic from 'net' into tcf_block_put_ext(), but after the offload unbind. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02enic: Add support for 'ethtool -g/-G'Parvi Kaustubhi2-1/+78
Add support for displaying and modifying rx and tx ring sizes using ethtool. Also, increasing version to 2.3.0.45 Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02enic: reset fetch indexParvi Kaustubhi1-14/+2
Since we are allowing rx ring size modification, reset fetch index everytime. Otherwise it could have a stale value that can lead to a null pointer dereference. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds4-4/+21
Pull block fixes from Jens Axboe: "A few fixes that should go into this series: - Regression fix for ide-cd, ensuring that a request is fully initialized. From Hongxu. - Ditto fix for virtio_blk, from Bart. - NVMe fix from Keith, ensuring that we set the right block size on revalidation. If the block size changed, we'd be in trouble without it. - NVMe rdma fix from Sagi, fixing a potential hang while the controller is being removed" * 'for-linus' of git://git.kernel.dk/linux-block: ide:ide-cd: fix kernel panic resulting from missing scsi_req_init nvme: Fix setting logical block format when revalidating virtio_blk: Fix an SG_IO regression nvme-rdma: fix possible hang when issuing commands during ctrl removal
2017-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-35/+137
Pull networking fixes from David Miller: 1) Fix refcounting in xfrm_bundle_lookup() when using a dummy bundle, from Steffen Klassert. 2) Fix crypto header handling in rx data frames in ath10k driver, from Vasanthakumar Thiagarajan. 3) Fix use after free of qdisc when we defer tcp_chain_flush() to a workqueue. From Cong Wang. 4) Fix double free in lapbether driver, from Pan Bian. 5) Sanitize TUNSETSNDBUF values, from Craig Gallek. 6) Fix refcounting when addrconf_permanent_addr() calls ipv6_del_addr(). From Eric Dumazet. 7) Fix MTU probing bug in TCP that goes back to 2007, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix tcp_mtu_probe() vs highest_sack ipv6: addrconf: increment ifp refcount before ipv6_del_addr() tun/tap: sanitize TUNSETSNDBUF input mlxsw: i2c: Fix buffer increment counter for write transaction mlxsw: reg: Add high and low temperature thresholds MAINTAINERS: Remove Yotam from mlxfw MAINTAINERS: Update Yotam's E-mail net: hns: set correct return value net: lapbether: fix double free bpf: remove SK_REDIRECT from UAPI net: phy: marvell: Only configure RGMII delays when using RGMII xfrm: Fix GSO for IPsec with GRE tunnel. tc-testing: fix arg to ip command: -s -> -n net_sched: remove tcf_block_put_deferred() l2tp: hold tunnel in pppol2tp_connect() Revert "ath10k: fix napi_poll budget overflow" ath10k: rebuild crypto header in rx data frames wcn36xx: Remove unnecessary rcu_read_unlock in wcn36xx_bss_info_changed xfrm: Clear sk_dst_cache when applying per-socket policy. xfrm: Fix xfrm_dst_cache memleak
2017-11-01ide:ide-cd: fix kernel panic resulting from missing scsi_req_initHongxu Jia1-0/+1
Since we split the scsi_request out of struct request, while the standard prep_rq_fn builds 10 byte cmds, it missed to invoke scsi_req_init() to initialize certain fields of a scsi_request structure (.__cmd[], .cmd, .cmd_len and .sense_len but no other members of struct scsi_request). An example panic on virtual machines (qemu/virtualbox) to boot from IDE cdrom: ... [ 8.754381] Call Trace: [ 8.755419] blk_peek_request+0x182/0x2e0 [ 8.755863] blk_fetch_request+0x1c/0x40 [ 8.756148] ? ktime_get+0x40/0xa0 [ 8.756385] do_ide_request+0x37d/0x660 [ 8.756704] ? cfq_group_service_tree_add+0x98/0xc0 [ 8.757011] ? cfq_service_tree_add+0x1e5/0x2c0 [ 8.757313] ? ktime_get+0x40/0xa0 [ 8.757544] __blk_run_queue+0x3d/0x60 [ 8.757837] queue_unplugged+0x2f/0xc0 [ 8.758088] blk_flush_plug_list+0x1f4/0x240 [ 8.758362] blk_finish_plug+0x2c/0x40 ... [ 8.770906] RIP: ide_cdrom_prep_fn+0x63/0x180 RSP: ffff92aec018bae8 [ 8.772329] ---[ end trace 6408481e551a85c9 ]--- ... Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-01Merge branch 'for-upstream' of ↵David S. Miller13-234/+287
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-11-01 Here's one more bluetooth-next pull request for the 4.15 kernel. - New NFA344A device entry for btusb drvier - Fix race conditions in hci_ldisc - Fix for isochronous interface assignments in btusb driver - A few other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to create hash-filters via tc-flower offloadKumar Sanghvi3-5/+161
Determine whether the flow classifies as exact-match with respect to 4-tuple and configured tuple mask in hw. If successfully classified as exact-match, offload the flow as hash-filter in hw. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: convert flower table to use rhashtableKumar Sanghvi4-36/+82
T6 supports ~500K hash filters and can theoretically climb up to ~1 million hash filters. Preallocated hash table is not efficient in terms of memory usage. So, use rhashtable instead which gives the flexibility to grow based on usage. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to retrieve stats for hash filtersKumar Sanghvi3-13/+25
Add support to retrieve packet-count and byte-count for hash-filters by retrieving filter-entry appropriately based on whether the request is for hash-filter or not. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to delete hash filterKumar Sanghvi7-7/+173
Use a combined ulptx work-request to send hash filter deletion request to hw. Hash filter deletion reply is processed on getting cpl_abort_rpl_rss. Release any L2T/SMT/CLIP entries on filter deletion. Also, free up the corresponding filter entry. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to create hash filtersKumar Sanghvi6-50/+562
Add support to create hash (exact-match) filters based on the value of 'hash' field in ch_filter_specification. Allocate SMT/L2T entries if DMAC-rewrite/SMAC-rewrite is requested. Allocate CLIP entry in case of IPv6 filter. Use cpl_act_open_req[6] to send hash filter create request to hw. Also, the filter tuple is calculated as part of sending this request. Hash-filter reply is processed on getting cpl_act_open_rpl. In case of success, various bits/fields in filter-tcb are set per filter requirement, such as enabling filter hitcnts, and/or various header rewrite operations, such as VLAN-rewrite, NAT or (L3/L4)-rewrite, and SMAC/DMAC-rewrite. In case of failure, clear the filter entry and release any hw resources occupied by it. The patch also moves the functions set_tcb_field, set_tcb_tflag and configure_filter_smac towards beginning of file. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: initialize hash-filter configurationKumar Sanghvi6-4/+54
Add support for hash-filter configuration on T6. Also, do basic checks for the related initialization. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: save additional filter tuple field shifts in tp_paramsKumar Sanghvi3-4/+29
Save additional filter tuple field shifts in tp_params based on configured filter tuple fields. Also, save the combined filter tuple mask based on configured filter tuple fields. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: dsa: lan9303: Add STP ALR entry on port 0Egil Hjelmeland1-0/+2
STP BPDUs arriving on user ports must sent to CPU port only, for processing by the SW bridge. Add an ALR entry with STP state override to fix that. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: thunderx: remove a couple of redundant assignmentsColin Ian King1-4/+0
The assignment to pointer msg is redundant as it is never read, so remove msg. Also remove the first assignment to qset as this is not read before the next re-assignment of a new value to qset in the for-loop. Cleans up two clang warnings: drivers/net/ethernet/cavium/thunder/nic_main.c:589:2: warning: Value stored to 'msg' is never read drivers/net/ethernet/cavium/thunder/nic_main.c:611:2: warning: Value stored to 'qset' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01sfc: support rx-fcs and rx-allEdward Cree4-8/+30
Ethernet FCS inclusion (rx-fcs) is supported on EF10 NICs, conditional on a firmware capability bit (MC_CMD_GET_CAPABILITIES_OUT_RX_INCLUDE_FCS). To receive frames with bad FCS (rx-all) we just don't return the discard flag EFX_RX_PKT_DISCARD from efx_ef10_handle_rx_event_errors() or efx_farch_handle_rx_not_ok(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: macb: remove redundant assignment to variable work_doneColin Ian King1-2/+0
Variable work_done is set to zero and this value is never read, instead it is set to another value a few statements later. Remove the redundant assignment. Cleans up clang warning: drivers/net/ethernet/cadence/macb_main.c:1221:2: warning: Value stored to 'work_done' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: hso: remove redundant unused variable devColin Ian King1-2/+0
The pointer dev is being assigned but is never used, hence it is redundant and can be removed. Cleans up clang warning: drivers/net/usb/hso.c:2280:2: warning: Value stored to 'dev' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01ppp: Destroy the mutex when cleanupGao Feng1-0/+1
The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the good readbility, it's better to invoke it in exit func when the init func invokes mutex_init. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: ethernet: slicoss: remove redundant initialization of idxColin Ian King1-1/+1
Variable idx is being initialized and later on over-written by a new value in a do-loop without the initial value ever being read. Hence the initializion is redundant and can be removed. Cleans up clang warning: drivers/net/ethernet/alacritech/slicoss.c:358:15: warning: Value stored to 'idx' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: phy: Fix sfp.c build against GPIO definitionsFlorian Fainelli1-1/+1
include/gpio.h does not contain the references we want, we should be including linux/gpio/consumer.h instead. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: phy: Cosmetic fixes to phylink/sfp/sfp-bus.cFlorian Fainelli3-29/+22
Perform a number of stylistic changes to phylink.c, sfp.c and sfp-bus.c: - align with netdev-style comments - align function arguments to the opening parenthesis - remove blank lines - fixup a few lines over 80 columns Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01tun/tap: sanitize TUNSETSNDBUF inputCraig Gallek2-0/+6
Syzkaller found several variants of the lockup below by setting negative values with the TUNSETSNDBUF ioctl. This patch adds a sanity check to both the tun and tap versions of this ioctl. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [repro:2389] Modules linked in: irq event stamp: 329692056 hardirqs last enabled at (329692055): [<ffffffff824b8381>] _raw_spin_unlock_irqrestore+0x31/0x75 hardirqs last disabled at (329692056): [<ffffffff824b9e58>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (35659740): [<ffffffff824bc958>] __do_softirq+0x328/0x48c softirqs last disabled at (35659731): [<ffffffff811c796c>] irq_exit+0xbc/0xd0 CPU: 0 PID: 2389 Comm: repro Not tainted 4.14.0-rc7 #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880009452140 task.stack: ffff880006a20000 RIP: 0010:_raw_spin_lock_irqsave+0x11/0x80 RSP: 0018:ffff880006a27c50 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10 RAX: ffff880009ac68d0 RBX: ffff880006a27ce0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff880006a27ce0 RDI: ffff880009ac6900 RBP: ffff880006a27c60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 000000000063ff00 R12: ffff880009ac6900 R13: ffff880006a27cf8 R14: 0000000000000001 R15: ffff880006a27cf8 FS: 00007f4be4838700(0000) GS:ffff88000cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020101000 CR3: 0000000009616000 CR4: 00000000000006f0 Call Trace: prepare_to_wait+0x26/0xc0 sock_alloc_send_pskb+0x14e/0x270 ? remove_wait_queue+0x60/0x60 tun_get_user+0x2cc/0x19d0 ? __tun_get+0x60/0x1b0 tun_chr_write_iter+0x57/0x86 __vfs_write+0x156/0x1e0 vfs_write+0xf7/0x230 SyS_write+0x57/0xd0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f4be4356df9 RSP: 002b:00007ffc18101c08 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4be4356df9 RDX: 0000000000000046 RSI: 0000000020101000 RDI: 0000000000000005 RBP: 00007ffc18101c40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000293 R12: 0000559c75f64780 R13: 00007ffc18101d30 R14: 0000000000000000 R15: 0000000000000000 Fixes: 33dccbb050bb ("tun: Limit amount of queued packets per device") Fixes: 20d29d7a916a ("net: macvtap driver") Signed-off-by: Craig Gallek <kraig@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: dsa: b53: Have b53_hdr_setup() enable/disable taggingFlorian Fainelli1-3/+13
Have b53_hdr_setup() check what kind of tagging protocol is configured (Broadcom or none) and apply the correct settings in both cases. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01mlxsw: i2c: Fix buffer increment counter for write transactionVadim Pasternak1-1/+1
It fixes a problem for the last chunk where 'chunk_size' is smaller than MLXSW_I2C_BLK_MAX and data is copied to the wrong offset, overriding previous data. Fixes: 6882b0aee180 ("mlxsw: Introduce support for I2C bus") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01drivers/net: tundra: Convert timers to use timer_setup()Kees Cook1-5/+5
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: "yuval.shaia@oracle.com" <yuval.shaia@oracle.com> Cc: Eric Dumazet <edumazet@google.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01drivers/net: ntb_netdev: Convert timers to use timer_setup()Kees Cook1-4/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jon Mason <jdmason@kudzu.us> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <Allen.Hubbe@emc.com> Cc: linux-ntb@googlegroups.com Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01atm: iphase: Fix space before '[' error.Arvind Yadav1-3/+3
Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: mvpp2: simplify the Tx desc set DMA logicAntoine Tenart1-26/+13
Two functions were always used to set the DMA addresses in Tx descriptors, because this address is split into a base+offset in the descriptors. A mask was used to come up with the base and offset addresses and two functions were called, mvpp2_txdesc_dma_addr_set() and mvpp2_txdesc_offset_set(). This patch moves the base+offset calculation logic to mvpp2_txdesc_dma_addr_set(), and removes mvpp2_txdesc_offset_set() to simplify things. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: mvpp2: use the aggr txq size define everywhereAntoine Tenart1-3/+3
Cosmetic patch using the MVPP2_AGGR_TXQ_SIZE everywhere instead of the size field of aggr_txq, as the size never change and is always equal to the MVPP2_AGGR_TXQ_SIZE define. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: mvpp2: limit TSO segments and use stop/wake thresholdsAntoine Tenart1-2/+16
Too many TSO descriptors can be required for the default queue size, when using small MSS values for example. Prevent this by adding a maximum number of allowed TSO segments (300). In addition set a stop and a wake thresholds to stop the queue when there's no room for a 1 "worst case scenario skb". Wake up the queue when the number of descriptors is low enough. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: mvpp2: initialize the RSS tablesAntoine Tenart1-0/+50
This patch initialize the RSS tables to evenly (depending on the packets RSS hashes) distribute the packets across port Rx queues. This helps to handle packets on different CPUs to improve performances, as more queues will be used in parallel. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: mvpp2: initialize the Tx FIFO sizeAntoine Tenart1-4/+21
So far only the Rx FIFO size was initialized. For PPv2.2 the Tx FIFO size can be set as well. This patch initializes the Tx FIFO size for PPv2.2 controllers to 3K. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: mvpp2: set the Rx FIFO size depending on the port speeds for PPv2.2Antoine Tenart1-6/+46
The Rx FIFO size was set to the same value for all ports. This patch sets it depending on the maximum speed a given port can handle. This is only working for PPv2.2. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01mlxsw: reg: Add high and low temperature thresholdsIdo Schimmel1-0/+25
The ASIC has the ability to generate events whenever a sensor indicates the temperature goes above or below its high or low thresholds, respectively. In new firmware versions the firmware enforces a minimum of 5 degrees Celsius difference between both thresholds. Make the driver conform to this requirement. Note that this is required even when the events are disabled, as in certain systems interrupts are generated via GPIO based on these thresholds. Fixes: 85926f877040 ("mlxsw: reg: Add definition of temperature management registers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: hns: set correct return valuePan Bian1-2/+2
The function of_parse_phandle() returns a NULL pointer if it cannot resolve a phandle property to a device_node pointer. In function hns_nic_dev_probe(), its return value is passed to PTR_ERR to extract the error code. However, in this case, the extracted error code will always be zero, which is unexpected. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: lapbether: fix double freePan Bian1-1/+0
The function netdev_priv() returns the private data of the device. The memory to store the private data is allocated in alloc_netdev() and is released in netdev_free(). Calling kfree() on the return value of netdev_priv() after netdev_free() results in a double free bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01mkiss: remove redundant assignment of len to ax->mtuColin Ian King1-1/+0
Variable len is being assigned a value that is never read, hence the assignment is redundant and can be removed. Cleans up clang warning: drivers/net/hamradio/mkiss.c:443:3: warning: Value stored to 'len' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 04:21:03 +0000