summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-07-17[media] v4l: Support extending the v4l2_pix_format structureLaurent Pinchart25-57/+79
The v4l2_pix_format structure has no reserved field. It is embedded in the v4l2_framebuffer structure which has no reserved fields either, and in the v4l2_format structure which has reserved fields that were not previously required to be zeroed out by applications. To allow extending v4l2_pix_format, inline it in the v4l2_framebuffer structure, and use the priv field as a magic value to indicate that the application has set all v4l2_pix_format extended fields and zeroed all reserved fields following the v4l2_pix_format field in the v4l2_format structure. The availability of this API extension is reported to userspace through the new V4L2_CAP_EXT_PIX_FORMAT capability flag. Just checking that the priv field is still set to the magic value at [GS]_FMT return wouldn't be enough, as older kernels don't zero the priv field on return. To simplify the internal API towards drivers zero the extended fields and set the priv field to the magic value for applications not aware of the extensions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] Fix 64-bit division fall-out from 64-bit control rangesHans Verkuil8-19/+31
Commit 0ba2aeb6dab80920edd9cf5b93b1ea4d6913b8f3 increased the internal control ranges to 64 bit, but that caused problems in drivers that use the minimum/maximum/step/default_value control values in a division or modulus operations since not all architectures support those natively. Luckily, in almost all cases it is possible to just cast to 32 bits (the control value is known to be 32 bits, so it is safe to cast). Only in v4l2-ctrls.c was it necessary to use do_div in one function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] go7007: add motion detection supportHans Verkuil6-184/+345
This patch adds motion detection support to the go7007 driver using the new motion detection controls, events. The global motion detection works fine, but the regional motion detection support probably needs more work. There seems to be some interaction between regions that makes setting correct thresholds difficult. The exact meaning of the thresholds isn't entirely clear either. I do not have any documentation, the only information I have is the custom code in the driver and a modet.c application. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] solo6x10: check dma_map_sg() return valueHans Verkuil1-4/+6
The dma_map_sg() function can fail, so check for the return value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] solo6x10: fix 'dma from stack' warningHans Verkuil1-4/+6
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] solo6x10: implement the motion detection eventHans Verkuil2-15/+60
Use the new motion detection event. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] solo6x10: implement the new motion detection controlsHans Verkuil3-87/+39
Replace the custom ioctls to set motion detection thresholds by standard matrix controls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls/v4l2-controls.h: add MD controlsHans Verkuil1-0/+27
Add the 'Detect' control class and the new motion detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: fix commentsHans Verkuil1-5/+9
Various comments referred to videodev2.h, but the control definitions have been moved to v4l2-controls.h. Also add the same reminder message to each class of controls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls/videodev2.h: add u8 and u16 typesHans Verkuil1-4/+41
These are needed by the upcoming patches for the motion detection matrices. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrl: fix error return of copy_to/from_userHans Verkuil1-5/+6
copy_to/from_user returns the number of bytes not copied, it does not return a 'normal' linux error code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: return elem_size instead of strlenHans Verkuil1-1/+1
When getting a string and the size given by the application is too short return the max length the string can have (elem_size) instead of the string length + 1. That makes more sense. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: add array supportHans Verkuil1-46/+63
Finish the userspace-facing array support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: type_ops can handle array elementsHans Verkuil1-18/+22
Extend the control type operations to handle N-dimensional array elements. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: prepare for array supportHans Verkuil1-19/+39
Add core support for N-dimensional arrays. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: prepare for array supportHans Verkuil1-9/+24
Add dims, nr_of_dims and elems fields to the core control structures in preparation for N-dimensional array support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: use ptrs for all but the s32 typeHans Verkuil7-17/+19
Rather than having two unions for all types just keep 'val' and 'cur.val' and use the p_cur and p_new unions to access all others. The only reason for keeping 'val' and 'cur.val' is that it is used all over, so converting this as well would be a huge job. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: compare values only onceHans Verkuil1-6/+11
When setting a control the control's new value is compared to the current value twice: once by new_to_cur(), once by cluster_changed(). Not a big deal when dealing with simple values, but it can be a problem when dealing with compound types or arrays. So fix this: cluster_changed() sets the has_changed flag, which is used by new_to_cur() instead of having to do another compare. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: rewrite copy routines to operate on union v4l2_ctrl_ptrHans Verkuil1-73/+56
In order to implement array support and (for the future) configuration stores we need to have more generic copy routines that all operate on the v4l2_ctrl_ptr union. So instead of e.g. using ctrl->cur.string it uses ptr.p_char. This makes e.g. cur_to_user generic so it can be used to copy any v4l2_ctrl_ptr value to userspace, not just the (hardcoded) current value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: create type_opsHans Verkuil2-103/+175
Since compound controls can have non-standard types we need to be able to do type-specific checks etc. In order to make that easy type operations are added. There are four operations: - equal: check if two values are equal - init: initialize a value - log: log the value - validate: validate a new value The v4l2_ctrl struct adds p_new and p_cur unions at the end of the struct. This union provides a standard way of accessing control types through a pointer, which greatly simplifies internal control processing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2: integrate support for VIDIOC_QUERY_EXT_CTRLHans Verkuil3-0/+38
Add the v4l2 core plumbing for the new VIDIOC_QUERY_EXT_CTRL ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: add support for compound typesHans Verkuil1-56/+168
This patch implements initial support for compound types. The changes are fairly obvious: basic support for is_ptr types, the type_is_int function is replaced by a is_int bitfield, and v4l2_query_ext_ctrl is added. Note that this patch does not yet add support for N-dimensional arrays, that comes later. So v4l2_query_ext_ctrl just sets elems to 1 and nr_of_dims and dims[] are all zero. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17[media] v4l2-ctrls: use pr_info/cont instead of printkHans Verkuil1-13/+13
Codingstyle fix. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-17Merge tag 'v3.16-rc5' into HEADMauro Carvalho Chehab410-2464/+5552
Docbook creation was broken. We need to move after v3.16-rc1-3-ga981296f048b in order to get commit a981296f048b99b0d5bb4d87c732a6cfb35a1c66. Linux 3.16-rc5 * tag 'v3.16-rc5': (985 commits) Linux 3.16-rc5 clk: spear3xx: Set proper clock parent of uart1/2 clk: spear3xx: Use proper control register offset parisc: drop unused defines and header includes parisc: fix fanotify_mark() syscall on 32bit compat kernel parisc: add serial ports of C8000/1GHz machine to hardware database ext4: fix potential null pointer dereference in ext4_free_inode ext4: fix a potential deadlock in __ext4_es_shrink() Documenation/laptops: rename and update hpfall.c DocBook: fix various typos DocBook: fix mtdnand typos scripts/kernel-doc: handle object-like macros Documentation/Changes: clean up mcelog paragraph ARM: at91: at91sam9x5: add clocks for usb device phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove phy: core: Fix error path in phy_create() drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE phy: omap-usb2: fix devm_ioremap_resource error detection code phy: sun4i: depend on RESET_CONTROLLER USB: serial: ftdi_sio: Add Infineon Triboard ...
2014-07-17[media] v4l2-ctrls: increase internal min/max/step/def to 64 bitHans Verkuil7-45/+73
While VIDIOC_QUERYCTRL is limited to 32 bit min/max/step/def values for controls, the upcoming VIDIOC_QUERY_EXT_CTRL isn't. So increase the internal representation to 64 bits in preparation. Because of these changes the msi3101 driver has been modified slightly to fix a formatting issue (%d becomes %lld), vivi had to be modified as well to cope with the new 64-bit min/max values and the PIXEL_RATE control in a few sensor drivers required proper min/max/def values. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: rework firmware download logic a little bitAntti Palosaari1-50/+58
Rework firmware selection / chip detection logic a little bit. Add missing release_firmware() to error path. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: few firmware download changesAntti Palosaari1-14/+27
Rework firmware selection logic a little bit. Print notice asking user update firmware when old Si2168 B40 firmware is used. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: advertise Si2158 A20 firmwareAntti Palosaari1-0/+1
Driver uses that firmware. Add it module firmware list. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: advertise Si2168 A30 firmwareAntti Palosaari1-0/+1
Driver uses that new firmware too, so advertise it. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] cxusb: TechnoTrend CT2-4400 USB DVB-T2/C tuner supportOlli Salonen4-1/+196
USB ID 0b48:3014. USB interface: Cypress CY7C68013A-56LTXC Demodulator: Silicon Labs Si2168-30 Tuner: Silicon Labs Si2158-20 Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: Set delivery system and bandwidth before tuningOlli Salonen1-0/+31
Tell used TV standard and bandwidth for tuner firmware. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: Add support for Si2158 chipOlli Salonen3-7/+73
Add support for Si2158 A20 chip. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: Move chip initialization to si2157_initOlli Salonen1-41/+30
Move chip initialization related code from si2157_set_params to si2157_init. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: Add support for chip revision Si2168 A30Olli Salonen2-6/+32
Add handling for different chip revisions and firmwares. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: Small typo fix (SI2157 -> SI2168)Olli Salonen1-2/+2
Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: receive 4 bytes reply from cmd 0x14Antti Palosaari1-9/+9
Command 0x14 returns 4 bytes as a reply. It is used for setting key/value pairs to firmware and it returns 4 bytes back including old value. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: do not set values which are already on defaultAntti Palosaari1-98/+0
No need to set explicitly value that are already defaulted same. Setting new value returns old value. Firmware default values can be found just looking returned value. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: remove duplicate commandAntti Palosaari1-8/+1
Same command was executed twice, but different value. Remove redundant command. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: add read data support for fw cmd funcAntti Palosaari2-34/+43
We want also read data from firmware. Add support for it. Copied from si2168 driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: implement CNR statisticAntti Palosaari1-0/+9
Implement CNR statistic. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: set cmd args using memcpyAntti Palosaari1-31/+8
Use memcpy for set cmd buffer in order to keep style in line with rest of file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: implement sleepAntti Palosaari1-7/+12
Implement sleep for power-management. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2157: implement sleepAntti Palosaari1-0/+11
Implement sleep for power-management. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-13Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds12-67/+93
git://git.linaro.org/people/mike.turquette/linux Pull clock driver fixes from Mike Turquette: "This batch of fixes is for a handful of clock drivers from Allwinner, Samsung, ST & TI. Most of them are of the "this hardware won't work without this fix" variety, including patches that fix platforms that did not boot under certain configurations. Other fixes are the result of changes to the clock core introduced in 3.15 that had subtle impacts on the clock drivers. There are no fixes to the clock framework core in this pull request" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: spear3xx: Set proper clock parent of uart1/2 clk: spear3xx: Use proper control register offset clk: qcom: HDMI source sel is 3 not 2 clk: sunxi: fix devm_ioremap_resource error detection code clk: s2mps11: Fix double free corruption during driver unbind clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled clk: exynos5420: Remove aclk66_peric from the clock tree description clk/exynos5250: fix bit number for tv sysmmu clock clk: s3c64xx: Hookup SPI clocks correctly clk: samsung: exynos4: Remove SRC_MASK_ISP gates clk: samsung: add more aliases for s3c24xx clk: samsung: fix several typos to fix boot on s3c2410 clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled clk: ti: dra7: return error code in failure case clk: ti: apll: not allocating enough data
2014-07-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds2-4/+22
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - Another set of OMAP fixes * Clock fixes * Restart handling * PHY regulators * SATA hwmod data for DRA7 + Some trivial fixes and removal of a bit of dead code - Exynos fixes * A bunch of clock fixes * Some SMP fixes * Exynos multi-core timer: register as clocksource and fix ftrace. + a few other minor fixes There's also a couple more patches, and at91 fix for USB caused by common clock conversion, and more MAINTAINERS entries for shmobile. We're definitely switching to only regression fixes from here on out, we've been a little less strict than usual up until now" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: at91: at91sam9x5: add clocks for usb device ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: OMAP2+: Remove non working OMAP HDMI audio initialization ARM: imx: fix shared gate clock ARM: dts: Update the parent for Audss clocks in Exynos5420 ARM: EXYNOS: Update secondary boot addr for secure mode ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio ARM: dts: am335x-evm: Enable the McASP FIFO for audio ARM: OMAP2+: Make GPMC skip disabled devices ARM: OMAP2+: create dsp device only on OMAP3 SoCs ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on ARM: DRA7/AM43XX: fix header definition for omap44xx_restart ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss ARM: DRA7: hwmod: Fixup SATA hwmod ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver ...
2014-07-13clk: spear3xx: Set proper clock parent of uart1/2Thomas Gleixner1-4/+10
The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13clk: spear3xx: Use proper control register offsetThomas Gleixner1-1/+1
The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-12Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-7/+28
Pull slave-dmaengine fixes from Vinod Koul: "We have two small fixes. First one from Daniel to handle 0-length packets for usb cppi dma. Second by Russell for imx-sdam cyclic residue reporting" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: Update imx-sdma cyclic handling to report residue dma: cppi41: handle 0-length packets
2014-07-12Merge tag 'samsung-fixes-3' of ↵Olof Johansson1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes-3 for 3.16" from Kukjin Kim: Samsung fixes-3 for v3.16 - update the parent for Auudss clock because kernel will be hang during late boot if the parent clock is disabled in bootloader. - enable clk handing in power domain because while power domain on/off, its regarding clock source will be reset and it causes a problem so need to handle it. - add mux clocks to be used by power domain for exynos5420-mfc during power domain on/off and property in device tree also. - register cpuidle only for exynos4210 and exynos5250 because a system failure will be happened on other exynos SoCs. * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: dts: Update the parent for Audss clocks in Exynos5420 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12Merge tag 'usb-3.16-rc5' of ↵Linus Torvalds8-9/+28
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes, PHY driver fixes (they ended up in this tree for lack of somewhere else to put them), and some new USB device ids" * tag 'usb-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove phy: core: Fix error path in phy_create() drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE phy: omap-usb2: fix devm_ioremap_resource error detection code phy: sun4i: depend on RESET_CONTROLLER USB: serial: ftdi_sio: Add Infineon Triboard USB: ftdi_sio: Add extra PID. usb: option: Add ID for Telewell TW-LTE 4G v2 USB: cp210x: add support for Corsair usb dongle
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 05:32:48 +0000